000416c933
This new import option will allow users to chose if we merge USD prims
with their Xform parent.
Given a USD like:
```
def Xform "MyObject"
{
def Mesh "MyObject_LOD0"
{
}
}
```
When the option is set to True (existing default), only the mesh will be
imported and its parent Xform transformation will be baked into the
Mesh.
```
# In blender after import
- MyObject_LOD0 (Mesh)
```
When the option is set to False, the parent Xform will always be
imported as an Empty object:
```
# In blender after import
- MyObject (Empty)
├─ MyObject_LOD0 (Mesh)
```
Co-authored-by: Odréanne Breton <odreanne.breton@ubisoft.com>
Co-authored-by: Sttevan Carnali Joga <sttevan.carnali-joga@ubisoft.com>
1457 lines
73 KiB
Python
1457 lines
73 KiB
Python
# SPDX-FileCopyrightText: 2021-2023 Blender Authors
|
|
#
|
|
# SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
import math
|
|
import pathlib
|
|
import sys
|
|
import tempfile
|
|
import unittest
|
|
from pxr import Gf, Sdf, Usd, UsdGeom, UsdShade
|
|
|
|
import bpy
|
|
|
|
args = None
|
|
|
|
|
|
class AbstractUSDTest(unittest.TestCase):
|
|
@classmethod
|
|
def setUpClass(cls):
|
|
cls.testdir = args.testdir
|
|
cls._tempdir = tempfile.TemporaryDirectory()
|
|
cls.tempdir = pathlib.Path(cls._tempdir.name)
|
|
|
|
def setUp(self):
|
|
self.assertTrue(self.testdir.exists(),
|
|
'Test dir {0} should exist'.format(self.testdir))
|
|
|
|
# Make sure we always start with a known-empty file.
|
|
bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend"))
|
|
|
|
def tearDown(self):
|
|
self._tempdir.cleanup()
|
|
|
|
|
|
class USDImportTest(AbstractUSDTest):
|
|
# Utility function to round each component of a vector to a few digits. The "+ 0" is to
|
|
# ensure that any negative zeros (-0.0) are converted to positive zeros (0.0).
|
|
@staticmethod
|
|
def round_vector(vector):
|
|
return [round(c, 5) + 0 for c in vector]
|
|
|
|
def test_import_operator(self):
|
|
"""Test running the import operator on valid and invalid files."""
|
|
|
|
infile = str(self.testdir / "usd_mesh_polygon_types.usda")
|
|
res = bpy.ops.wm.usd_import(filepath=infile)
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}")
|
|
|
|
infile = str(self.testdir / "this_file_doesn't_exist.usda")
|
|
# RPT_ERROR Reports from operators generate `RuntimeError` python exceptions.
|
|
try:
|
|
res = bpy.ops.wm.usd_import(filepath=infile)
|
|
self.assertEqual({'CANCELLED'}, res, "Was somehow able to import a non-existent USD file!")
|
|
except RuntimeError as e:
|
|
self.assertTrue(e.args[0].startswith("Error: USD Import: unable to open stage to read"))
|
|
|
|
def test_import_prim_hierarchy(self):
|
|
"""Test importing a simple object hierarchy from a USDA file."""
|
|
|
|
infile = str(self.testdir / "prim-hierarchy.usda")
|
|
|
|
res = bpy.ops.wm.usd_import(filepath=infile)
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}")
|
|
|
|
objects = bpy.context.scene.collection.objects
|
|
self.assertEqual(5, len(objects), f"Test scene {infile} should have five objects; found {len(objects)}")
|
|
|
|
# Test the hierarchy.
|
|
self.assertIsNone(objects['World'].parent, "/World should not be parented.")
|
|
self.assertEqual(objects['World'], objects['Plane'].parent, "Plane should be child of /World")
|
|
self.assertEqual(objects['World'], objects['Plane_001'].parent, "Plane_001 should be a child of /World")
|
|
self.assertEqual(objects['World'], objects['Empty'].parent, "Empty should be a child of /World")
|
|
self.assertEqual(objects['Empty'], objects['Plane_002'].parent, "Plane_002 should be a child of /World")
|
|
|
|
def test_import_xform_and_mesh_merged_false(self):
|
|
"""Test importing a simple object hierarchy (xform and mesh) from a USDA file."""
|
|
|
|
infile = str(self.testdir / "usd_mesh_polygon_types.usda")
|
|
|
|
res = bpy.ops.wm.usd_import(filepath=infile, merge_parent_xform=False)
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}")
|
|
|
|
objects = bpy.context.scene.collection.objects
|
|
self.assertEqual(10, len(objects), f"Test scene {infile} should have ten objects; found {len(objects)}")
|
|
|
|
# Test the hierarchy.
|
|
self.assertEqual(
|
|
objects['degenerate'],
|
|
objects['m_degenerate'].parent,
|
|
"m_degenerate should be child of /degenerate")
|
|
self.assertEqual(
|
|
objects['triangles'],
|
|
objects['m_triangles'].parent,
|
|
"m_triangles should be a child of /triangles")
|
|
self.assertEqual(objects['quad'], objects['m_quad'].parent, "m_quad should be a child of /quad")
|
|
self.assertEqual(objects['ngon_concave'], objects['m_ngon_concave'].parent,
|
|
"m_ngon_concave should be a child of /ngon_concave")
|
|
|
|
def test_import_mesh_topology(self):
|
|
"""Test importing meshes with different polygon types."""
|
|
|
|
infile = str(self.testdir / "usd_mesh_polygon_types.usda")
|
|
res = bpy.ops.wm.usd_import(filepath=infile)
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}")
|
|
|
|
objects = bpy.context.scene.collection.objects
|
|
self.assertEqual(5, len(objects), f"Test scene {infile} should have five objects; found {len(objects)}")
|
|
|
|
# Test topology counts.
|
|
self.assertIn("m_degenerate", objects, "Scene does not contain object m_degenerate")
|
|
mesh = objects["m_degenerate"].data
|
|
self.assertEqual(len(mesh.polygons), 2)
|
|
self.assertEqual(len(mesh.edges), 7)
|
|
self.assertEqual(len(mesh.vertices), 6)
|
|
|
|
self.assertIn("m_triangles", objects, "Scene does not contain object m_triangles")
|
|
mesh = objects["m_triangles"].data
|
|
self.assertEqual(len(mesh.polygons), 2)
|
|
self.assertEqual(len(mesh.edges), 5)
|
|
self.assertEqual(len(mesh.vertices), 4)
|
|
self.assertEqual(len(mesh.polygons[0].vertices), 3)
|
|
|
|
self.assertIn("m_quad", objects, "Scene does not contain object m_quad")
|
|
mesh = objects["m_quad"].data
|
|
self.assertEqual(len(mesh.polygons), 1)
|
|
self.assertEqual(len(mesh.edges), 4)
|
|
self.assertEqual(len(mesh.vertices), 4)
|
|
self.assertEqual(len(mesh.polygons[0].vertices), 4)
|
|
|
|
self.assertIn("m_ngon_concave", objects, "Scene does not contain object m_ngon_concave")
|
|
mesh = objects["m_ngon_concave"].data
|
|
self.assertEqual(len(mesh.polygons), 1)
|
|
self.assertEqual(len(mesh.edges), 5)
|
|
self.assertEqual(len(mesh.vertices), 5)
|
|
self.assertEqual(len(mesh.polygons[0].vertices), 5)
|
|
|
|
self.assertIn("m_ngon_convex", objects, "Scene does not contain object m_ngon_convex")
|
|
mesh = objects["m_ngon_convex"].data
|
|
self.assertEqual(len(mesh.polygons), 1)
|
|
self.assertEqual(len(mesh.edges), 5)
|
|
self.assertEqual(len(mesh.vertices), 5)
|
|
self.assertEqual(len(mesh.polygons[0].vertices), 5)
|
|
|
|
def test_import_mesh_uv_maps(self):
|
|
"""Test importing meshes with udim UVs and multiple UV sets."""
|
|
|
|
infile = str(self.testdir / "usd_mesh_udim.usda")
|
|
res = bpy.ops.wm.usd_import(filepath=infile)
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}")
|
|
|
|
objects = bpy.context.scene.collection.objects
|
|
if "preview" in bpy.data.objects:
|
|
bpy.data.objects.remove(bpy.data.objects["preview"])
|
|
self.assertEqual(1, len(objects), f"File {infile} should contain one object, found {len(objects)}")
|
|
|
|
mesh = bpy.data.objects["uvmap_plane"].data
|
|
self.assertEqual(len(mesh.uv_layers), 2,
|
|
f"Object uvmap_plane should have two uv layers, found {len(mesh.uv_layers)}")
|
|
|
|
expected_layer_names = {"udim_map", "uvmap"}
|
|
imported_layer_names = set(mesh.uv_layers.keys())
|
|
self.assertEqual(
|
|
expected_layer_names,
|
|
imported_layer_names,
|
|
f"Expected layer names ({expected_layer_names}) not found on uvmap_plane.")
|
|
|
|
def get_coords(data):
|
|
coords = [x.uv for x in uvmap]
|
|
return coords
|
|
|
|
def uv_min_max(data):
|
|
coords = get_coords(data)
|
|
uv_min_x = min([uv[0] for uv in coords])
|
|
uv_max_x = max([uv[0] for uv in coords])
|
|
uv_min_y = min([uv[1] for uv in coords])
|
|
uv_max_y = max([uv[1] for uv in coords])
|
|
return uv_min_x, uv_max_x, uv_min_y, uv_max_y
|
|
|
|
# Quick tests for point range.
|
|
uvmap = mesh.uv_layers["uvmap"].data
|
|
self.assertEqual(len(uvmap), 128)
|
|
min_x, max_x, min_y, max_y = uv_min_max(uvmap)
|
|
self.assertGreaterEqual(min_x, 0.0)
|
|
self.assertGreaterEqual(min_y, 0.0)
|
|
self.assertLessEqual(max_x, 1.0)
|
|
self.assertLessEqual(max_y, 1.0)
|
|
|
|
uvmap = mesh.uv_layers["udim_map"].data
|
|
self.assertEqual(len(uvmap), 128)
|
|
min_x, max_x, min_y, max_y = uv_min_max(uvmap)
|
|
self.assertGreaterEqual(min_x, 0.0)
|
|
self.assertGreaterEqual(min_y, 0.0)
|
|
self.assertLessEqual(max_x, 2.0)
|
|
self.assertLessEqual(max_y, 1.0)
|
|
|
|
# Make sure at least some points are in a udim tile.
|
|
coords = get_coords(uvmap)
|
|
coords = list(filter(lambda x: x[0] > 1.0, coords))
|
|
self.assertGreater(len(coords), 16)
|
|
|
|
def test_import_camera_properties(self):
|
|
"""Test importing camera to ensure properties set correctly."""
|
|
|
|
# This file has metersPerUnit = 1
|
|
infile = str(self.testdir / "usd_camera_test_1.usda")
|
|
res = bpy.ops.wm.usd_import(filepath=infile)
|
|
self.assertEqual({'FINISHED'}, res)
|
|
|
|
camera_object = bpy.data.objects["Test_Camera"]
|
|
test_cam = camera_object.data
|
|
|
|
self.assertAlmostEqual(43.12, test_cam.lens, 2)
|
|
self.assertAlmostEqual(24.89, test_cam.sensor_width, 2)
|
|
self.assertAlmostEqual(14.00, test_cam.sensor_height, 2)
|
|
self.assertAlmostEqual(2.281, test_cam.shift_x, 2)
|
|
self.assertAlmostEqual(0.496, test_cam.shift_y, 2)
|
|
|
|
bpy.ops.object.select_all(action='SELECT')
|
|
bpy.ops.object.delete()
|
|
|
|
# This file has metersPerUnit = 0.1
|
|
infile = str(self.testdir / "usd_camera_test_2.usda")
|
|
res = bpy.ops.wm.usd_import(filepath=infile)
|
|
self.assertEqual({'FINISHED'}, res)
|
|
|
|
camera_object = bpy.data.objects["Test_Camera"]
|
|
test_cam = camera_object.data
|
|
|
|
self.assertAlmostEqual(4.312, test_cam.lens, 3)
|
|
self.assertAlmostEqual(2.489, test_cam.sensor_width, 3)
|
|
self.assertAlmostEqual(1.400, test_cam.sensor_height, 3)
|
|
self.assertAlmostEqual(2.281, test_cam.shift_x, 3)
|
|
self.assertAlmostEqual(0.496, test_cam.shift_y, 3)
|
|
|
|
def test_import_materials(self):
|
|
"""Validate UsdPreviewSurface shader graphs."""
|
|
|
|
# Use the existing materials test file to create the USD file
|
|
# for import. It is validated as part of the bl_usd_export test.
|
|
bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "usd_materials_export.blend"))
|
|
testfile = str(self.tempdir / "temp_materials.usda")
|
|
res = bpy.ops.wm.usd_export(filepath=str(testfile), export_materials=True)
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to export to {testfile}")
|
|
|
|
# Reload the empty file and import back in
|
|
bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend"))
|
|
res = bpy.ops.wm.usd_import(filepath=testfile)
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {testfile}")
|
|
|
|
# Most shader graph validation should occur through the Hydra render test suite. Here we
|
|
# will only check some high-level criteria for each expected node graph.
|
|
|
|
def assert_all_nodes_present(mat, node_list):
|
|
nodes = mat.node_tree.nodes
|
|
self.assertEqual(len(nodes), len(node_list))
|
|
for node in node_list:
|
|
self.assertTrue(nodes.find(node) >= 0, f"Could not find node '{node}' in material '{mat.name}'")
|
|
|
|
mat = bpy.data.materials["Material"]
|
|
assert_all_nodes_present(mat, ["Principled BSDF", "Image Texture", "UV Map", "Material Output"])
|
|
|
|
mat = bpy.data.materials["Clip_With_LessThanInvert"]
|
|
assert_all_nodes_present(
|
|
mat, ["Principled BSDF", "Image Texture", "UV Map", "Math", "Math.001", "Material Output"])
|
|
node = [n for n in mat.node_tree.nodes if n.type == 'MATH' and n.operation == "LESS_THAN"][0]
|
|
self.assertAlmostEqual(node.inputs[1].default_value, 0.2, 3)
|
|
|
|
mat = bpy.data.materials["Clip_With_Round"]
|
|
assert_all_nodes_present(
|
|
mat, ["Principled BSDF", "Image Texture", "UV Map", "Math", "Math.001", "Material Output"])
|
|
node = [n for n in mat.node_tree.nodes if n.type == 'MATH' and n.operation == "LESS_THAN"][0]
|
|
self.assertAlmostEqual(node.inputs[1].default_value, 0.5, 3)
|
|
|
|
mat = bpy.data.materials["Transforms"]
|
|
assert_all_nodes_present(mat, ["Principled BSDF", "Image Texture", "UV Map", "Mapping", "Material Output"])
|
|
node = mat.node_tree.nodes["Mapping"]
|
|
self.assertEqual(self.round_vector(node.inputs[1].default_value), [0.75, 0.75, 0])
|
|
self.assertEqual(self.round_vector(node.inputs[2].default_value), [0, 0, 3.14159])
|
|
self.assertEqual(self.round_vector(node.inputs[3].default_value), [0.5, 0.5, 1])
|
|
|
|
mat = bpy.data.materials["NormalMap"]
|
|
assert_all_nodes_present(mat, ["Principled BSDF", "Image Texture", "UV Map", "Normal Map", "Material Output"])
|
|
|
|
mat = bpy.data.materials["NormalMap_Scale_Bias"]
|
|
assert_all_nodes_present(mat, ["Principled BSDF", "Image Texture", "UV Map",
|
|
"Normal Map", "Vector Math", "Vector Math.001", "Material Output"])
|
|
node = mat.node_tree.nodes["Vector Math"]
|
|
self.assertEqual(self.round_vector(node.inputs[1].default_value), [2, -2, 2])
|
|
self.assertEqual(self.round_vector(node.inputs[2].default_value), [-1, 1, -1])
|
|
|
|
def test_import_material_subsets(self):
|
|
"""Validate multiple materials assigned to the same mesh work correctly."""
|
|
|
|
# Use the existing materials test file to create the USD file
|
|
# for import. It is validated as part of the bl_usd_export test.
|
|
bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "usd_materials_multi.blend"))
|
|
# Ensure the simulation zone data is baked for all relevant frames...
|
|
for frame in range(1, 5):
|
|
bpy.context.scene.frame_set(frame)
|
|
bpy.context.scene.frame_set(1)
|
|
|
|
testfile = str(self.tempdir / "usd_materials_multi.usda")
|
|
res = bpy.ops.wm.usd_export(filepath=testfile, export_animation=True, evaluation_mode="RENDER")
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to export to {testfile}")
|
|
|
|
# Reload the empty file and import back in
|
|
bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend"))
|
|
res = bpy.ops.wm.usd_import(filepath=testfile)
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {testfile}")
|
|
|
|
# The static mesh should have 4 materials each assigned to 4 faces (16 faces total)
|
|
static_mesh = bpy.data.objects["static_mesh"].data
|
|
material_index_attr = static_mesh.attributes["material_index"]
|
|
self.assertEqual(len(static_mesh.materials), 4)
|
|
self.assertEqual(len(static_mesh.polygons), 16)
|
|
self.assertEqual(len(material_index_attr.data), 16)
|
|
|
|
for mat_index in range(0, 4):
|
|
face_indices = [i for i, d in enumerate(material_index_attr.data) if d.value == mat_index]
|
|
self.assertEqual(len(face_indices), 4, f"Incorrect number of faces with material index {mat_index}")
|
|
|
|
def test_import_material_displacement(self):
|
|
"""Validate correct import of Displacement information for the UsdPreviewSurface"""
|
|
|
|
# Use the existing materials test file to create the USD file
|
|
# for import. It is validated as part of the bl_usd_export test.
|
|
bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "usd_materials_displace.blend"))
|
|
testfile = str(self.tempdir / "temp_material_displace.usda")
|
|
res = bpy.ops.wm.usd_export(filepath=str(testfile), export_materials=True)
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to export to {testfile}")
|
|
|
|
# Reload the empty file and import back in
|
|
bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend"))
|
|
res = bpy.ops.wm.usd_import(filepath=testfile)
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {testfile}")
|
|
|
|
# Most shader graph validation should occur through the Hydra render test suite. Here we
|
|
# will only check some high-level criteria for each expected node graph.
|
|
|
|
def assert_displacement(mat, height, midlevel, scale):
|
|
nodes = mat.node_tree.nodes
|
|
node_displace_index = nodes.find("Displacement")
|
|
self.assertTrue(node_displace_index >= 0)
|
|
|
|
node_displace = nodes[node_displace_index]
|
|
if height is not None:
|
|
self.assertAlmostEqual(node_displace.inputs[0].default_value, height)
|
|
else:
|
|
self.assertEqual(len(node_displace.inputs[0].links), 1)
|
|
self.assertAlmostEqual(node_displace.inputs[1].default_value, midlevel)
|
|
self.assertAlmostEqual(node_displace.inputs[2].default_value, scale)
|
|
|
|
mat = bpy.data.materials["constant"]
|
|
assert_displacement(mat, 0.95, 0.5, 1.0)
|
|
|
|
mat = bpy.data.materials["mid_1_0"]
|
|
assert_displacement(mat, None, 1.0, 1.0)
|
|
mat = bpy.data.materials["mid_0_5"]
|
|
assert_displacement(mat, None, 0.5, 1.0)
|
|
mat = bpy.data.materials["mid_0_0"]
|
|
assert_displacement(mat, None, 0.0, 1.0)
|
|
|
|
mat = bpy.data.materials["mid_1_0_scale_0_3"]
|
|
assert_displacement(mat, None, 1.0, 0.3)
|
|
mat = bpy.data.materials["mid_0_5_scale_0_3"]
|
|
assert_displacement(mat, None, 0.5, 0.3)
|
|
mat = bpy.data.materials["mid_0_0_scale_0_3"]
|
|
assert_displacement(mat, None, 0.0, 0.3)
|
|
|
|
def test_import_shader_varname_with_connection(self):
|
|
"""Test importing USD shader where uv primvar is a connection"""
|
|
|
|
varname = "testmap"
|
|
texfile = str(self.testdir / "textures/test_grid_1001.png")
|
|
|
|
# Create the test USD file.
|
|
temp_usd_file = str(self.tempdir / "usd_varname_test.usda")
|
|
stage = Usd.Stage.CreateNew(temp_usd_file)
|
|
mesh1 = stage.DefinePrim("/mesh1", "Mesh")
|
|
mesh2 = stage.DefinePrim("/mesh2", "Mesh")
|
|
|
|
# Create two USD preview surface shaders in two materials.
|
|
m1 = UsdShade.Material.Define(stage, "/mat1")
|
|
s1 = UsdShade.Shader.Define(stage, "/mat1/previewshader")
|
|
s1.CreateIdAttr("UsdPreviewSurface")
|
|
m1.CreateSurfaceOutput().ConnectToSource(s1.ConnectableAPI(), "surface")
|
|
t1 = UsdShade.Shader.Define(stage, "/mat1/diffuseTexture")
|
|
t1.CreateIdAttr("UsdUVTexture")
|
|
t1.CreateInput('file', Sdf.ValueTypeNames.Asset).Set(texfile)
|
|
t1.CreateOutput("rgb", Sdf.ValueTypeNames.Float3)
|
|
s1.CreateInput("diffuseColor", Sdf.ValueTypeNames.Color3f).ConnectToSource(t1.ConnectableAPI(), "rgb")
|
|
t2 = UsdShade.Shader.Define(stage, "/mat1/roughnessTexture")
|
|
t2.CreateIdAttr("UsdUVTexture")
|
|
t2.CreateInput('file', Sdf.ValueTypeNames.Asset).Set(texfile)
|
|
t2.CreateOutput("rgb", Sdf.ValueTypeNames.Float3)
|
|
s1.CreateInput("roughness", Sdf.ValueTypeNames.Color3f).ConnectToSource(t2.ConnectableAPI(), "rgb")
|
|
|
|
m2 = UsdShade.Material.Define(stage, "/mat2")
|
|
s2 = UsdShade.Shader.Define(stage, "/mat2/previewshader")
|
|
s2.CreateIdAttr("UsdPreviewSurface")
|
|
m2.CreateSurfaceOutput().ConnectToSource(s2.ConnectableAPI(), "surface")
|
|
t3 = UsdShade.Shader.Define(stage, "/mat2/diffuseTexture")
|
|
t3.CreateIdAttr("UsdUVTexture")
|
|
t3.CreateInput('file', Sdf.ValueTypeNames.Asset).Set(texfile)
|
|
t3.CreateOutput("rgb", Sdf.ValueTypeNames.Float3)
|
|
s2.CreateInput("diffuseColor", Sdf.ValueTypeNames.Color3f).ConnectToSource(t3.ConnectableAPI(), "rgb")
|
|
t4 = UsdShade.Shader.Define(stage, "/mat2/roughnessTexture")
|
|
t4.CreateIdAttr("UsdUVTexture")
|
|
t4.CreateInput('file', Sdf.ValueTypeNames.Asset).Set(texfile)
|
|
t4.CreateOutput("rgb", Sdf.ValueTypeNames.Float3)
|
|
s2.CreateInput("roughness", Sdf.ValueTypeNames.Color3f).ConnectToSource(t4.ConnectableAPI(), "rgb")
|
|
|
|
# Bind mat1 to mesh1, mat2 to mesh2.
|
|
bindingAPI = UsdShade.MaterialBindingAPI.Apply(mesh1)
|
|
bindingAPI.Bind(m1)
|
|
bindingAPI = UsdShade.MaterialBindingAPI.Apply(mesh2)
|
|
bindingAPI.Bind(m2)
|
|
|
|
# Create varname defined as a token.
|
|
s3 = UsdShade.Shader.Define(stage, "/mat1/primvar_reader1")
|
|
s3.CreateIdAttr('UsdPrimvarReader_float2')
|
|
s3input = s3.CreateInput("varname", Sdf.ValueTypeNames.Token)
|
|
s3input.Set(varname)
|
|
t1.CreateInput("st", Sdf.ValueTypeNames.TexCoord2f).ConnectToSource(s3.ConnectableAPI(), "result")
|
|
|
|
# Create varname defined as a connection to a token.
|
|
varname1 = m1.CreateInput("varname", Sdf.ValueTypeNames.Token)
|
|
varname1.Set(varname)
|
|
s4 = UsdShade.Shader.Define(stage, "/mat1/primvar_reader2")
|
|
s4.CreateIdAttr('UsdPrimvarReader_float2')
|
|
s4input = s4.CreateInput("varname", Sdf.ValueTypeNames.Token)
|
|
UsdShade.ConnectableAPI.ConnectToSource(s4input, varname1)
|
|
t2.CreateInput("st", Sdf.ValueTypeNames.TexCoord2f).ConnectToSource(s4.ConnectableAPI(), "result")
|
|
|
|
# Create varname defined as a string.
|
|
s5 = UsdShade.Shader.Define(stage, "/mat2/primvar_reader1")
|
|
s5.CreateIdAttr('UsdPrimvarReader_float2')
|
|
s5input = s5.CreateInput("varname", Sdf.ValueTypeNames.String)
|
|
s5input.Set(varname)
|
|
t3.CreateInput("st", Sdf.ValueTypeNames.TexCoord2f).ConnectToSource(s5.ConnectableAPI(), "result")
|
|
|
|
# Create varname defined as a connection to a string.
|
|
varname2 = m2.CreateInput("varname", Sdf.ValueTypeNames.String)
|
|
varname2.Set(varname)
|
|
s6 = UsdShade.Shader.Define(stage, "/mat2/primvar_reader2")
|
|
s6.CreateIdAttr('UsdPrimvarReader_float2')
|
|
s6input = s6.CreateInput("varname", Sdf.ValueTypeNames.String)
|
|
UsdShade.ConnectableAPI.ConnectToSource(s6input, varname2)
|
|
t4.CreateInput("st", Sdf.ValueTypeNames.TexCoord2f).ConnectToSource(s6.ConnectableAPI(), "result")
|
|
|
|
stage.Save()
|
|
|
|
# Now import the USD file.
|
|
res = bpy.ops.wm.usd_import(filepath=temp_usd_file, import_all_materials=True)
|
|
self.assertEqual({'FINISHED'}, res)
|
|
|
|
# Ensure that we find the correct varname for all four primvar readers.
|
|
num_uvmaps_found = 0
|
|
mats_to_test = []
|
|
mats_to_test.append(bpy.data.materials["mat1"])
|
|
mats_to_test.append(bpy.data.materials["mat2"])
|
|
for mat in mats_to_test:
|
|
self.assertIsNotNone(mat.node_tree, "Material node tree is empty")
|
|
for node in mat.node_tree.nodes:
|
|
if node.type == "UVMAP":
|
|
self.assertEqual(varname, node.uv_map, "Unexpected value for varname")
|
|
num_uvmaps_found += 1
|
|
|
|
self.assertEqual(4, num_uvmaps_found, "One or more test materials failed to import")
|
|
|
|
def test_import_animation(self):
|
|
"""Test importing objects with xform, armature, and USD blend shape animations."""
|
|
|
|
# Use the existing animation test file to create the USD file
|
|
# for import. It is validated as part of the bl_usd_export test.
|
|
bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "usd_anim_test.blend"))
|
|
testfile = str(self.tempdir / "usd_anim_test.usda")
|
|
res = bpy.ops.wm.usd_export(
|
|
filepath=testfile,
|
|
export_animation=True,
|
|
evaluation_mode="RENDER",
|
|
)
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to export to {testfile}")
|
|
|
|
# Reload the empty file and import back in
|
|
bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend"))
|
|
res = bpy.ops.wm.usd_import(filepath=testfile)
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {testfile}")
|
|
|
|
# Validate some simple aspects of the animated objects which prove that they're animating.
|
|
ob_xform = bpy.data.objects["cube_anim_xform"]
|
|
ob_shapekeys = bpy.data.objects["cube_anim_keys"]
|
|
ob_arm = bpy.data.objects["column_anim_armature"]
|
|
ob_arm2_side_a = bpy.data.objects["side_a"]
|
|
ob_arm2_side_b = bpy.data.objects["side_b"]
|
|
|
|
bpy.context.scene.frame_set(1)
|
|
self.assertEqual(len(ob_xform.constraints), 1)
|
|
self.assertEqual(self.round_vector(ob_xform.matrix_world.translation), [0.0, -2.0, 0.0])
|
|
self.assertEqual(self.round_vector(ob_shapekeys.dimensions), [1.0, 1.0, 1.0])
|
|
self.assertEqual(self.round_vector(ob_arm.dimensions), [0.4, 0.4, 3.0])
|
|
self.assertEqual(self.round_vector(ob_arm2_side_a.dimensions), [0.5, 0.0, 0.5])
|
|
self.assertEqual(self.round_vector(ob_arm2_side_b.dimensions), [0.5, 0.0, 0.5])
|
|
self.assertAlmostEqual(ob_arm2_side_a.matrix_world.to_euler('XYZ').z, 0, 5)
|
|
self.assertAlmostEqual(ob_arm2_side_b.matrix_world.to_euler('XYZ').z, 0, 5)
|
|
|
|
bpy.context.scene.frame_set(5)
|
|
self.assertEqual(len(ob_xform.constraints), 1)
|
|
self.assertEqual(self.round_vector(ob_xform.matrix_world.translation), [3.0, -2.0, 0.0])
|
|
self.assertEqual(self.round_vector(ob_shapekeys.dimensions), [0.1, 0.1, 0.1])
|
|
self.assertEqual(self.round_vector(ob_arm.dimensions), [1.65545, 0.4, 2.38953])
|
|
self.assertEqual(self.round_vector(ob_arm2_side_a.dimensions), [0.25, 0.0, 0.25])
|
|
self.assertEqual(self.round_vector(ob_arm2_side_b.dimensions), [1.0, 0.0, 1.0])
|
|
self.assertAlmostEqual(ob_arm2_side_a.matrix_world.to_euler('XYZ').z, 1.5708, 5)
|
|
self.assertAlmostEqual(ob_arm2_side_b.matrix_world.to_euler('XYZ').z, 1.5708, 5)
|
|
|
|
def test_import_volumes(self):
|
|
"""Validate volume import."""
|
|
|
|
# Use the existing volume test file to create the USD file
|
|
# for import. It is validated as part of the bl_usd_export test.
|
|
bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "usd_volumes.blend"))
|
|
# Ensure the simulation zone data is baked for all relevant frames...
|
|
for frame in range(4, 15):
|
|
bpy.context.scene.frame_set(frame)
|
|
bpy.context.scene.frame_set(4)
|
|
|
|
testfile = str(self.tempdir / "usd_volumes.usda")
|
|
res = bpy.ops.wm.usd_export(filepath=testfile, export_animation=True, evaluation_mode="RENDER")
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to export to {testfile}")
|
|
|
|
# Reload the empty file and import back in
|
|
bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend"))
|
|
res = bpy.ops.wm.usd_import(filepath=testfile)
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {testfile}")
|
|
|
|
# Validate that all volumes are properly configured.
|
|
vol_displace = bpy.data.objects["vol_displace"]
|
|
vol_filesequence = bpy.data.objects["vol_filesequence"]
|
|
vol_mesh2vol = bpy.data.objects["vol_mesh2vol"]
|
|
vol_sim = bpy.data.objects["Volume"]
|
|
|
|
def check_sequence(ob, frames, start, offset):
|
|
self.assertTrue(ob.data.is_sequence)
|
|
self.assertEqual(ob.data.frame_duration, frames)
|
|
self.assertEqual(ob.data.frame_start, start)
|
|
self.assertEqual(ob.data.frame_offset, offset)
|
|
|
|
check_sequence(vol_displace, 11, 4, 3)
|
|
check_sequence(vol_filesequence, 6, 8, 13)
|
|
check_sequence(vol_mesh2vol, 11, 4, 3)
|
|
check_sequence(vol_sim, 11, 4, 3)
|
|
|
|
# Validate that their object dimensions are changing by spot checking 2 interesting frames
|
|
bpy.context.scene.frame_set(8)
|
|
dim_displace = vol_displace.dimensions.copy()
|
|
dim_filesequence = vol_filesequence.dimensions.copy()
|
|
dim_mesh2vol = vol_mesh2vol.dimensions.copy()
|
|
dim_sim = vol_sim.dimensions.copy()
|
|
|
|
bpy.context.scene.frame_set(12)
|
|
self.assertTrue(vol_displace.dimensions != dim_displace)
|
|
self.assertTrue(vol_filesequence.dimensions != dim_filesequence)
|
|
self.assertTrue(vol_mesh2vol.dimensions != dim_mesh2vol)
|
|
self.assertTrue(vol_sim.dimensions != dim_sim)
|
|
|
|
def test_import_usd_blend_shapes(self):
|
|
"""Test importing USD blend shapes with animated weights."""
|
|
|
|
infile = str(self.testdir / "usd_blend_shape_test.usda")
|
|
res = bpy.ops.wm.usd_import(filepath=infile)
|
|
self.assertEqual({'FINISHED'}, res)
|
|
|
|
obj = bpy.data.objects["Plane"]
|
|
|
|
obj.active_shape_key_index = 1
|
|
|
|
key = obj.active_shape_key
|
|
self.assertEqual(key.name, "Key_1", "Unexpected shape key name")
|
|
|
|
# Verify the number of shape key points.
|
|
self.assertEqual(len(key.data), 4, "Unexpected number of shape key point")
|
|
|
|
# Verify shape key point coordinates
|
|
|
|
# Reference point values.
|
|
refs = ((-2.51, -1.92, 0.20), (0.86, -1.46, -0.1),
|
|
(-1.33, 1.29, .84), (1.32, 2.20, -0.42))
|
|
|
|
for i in range(4):
|
|
co = key.data[i].co
|
|
ref = refs[i]
|
|
# Compare coordinates.
|
|
for j in range(3):
|
|
self.assertAlmostEqual(co[j], ref[j], 2)
|
|
|
|
# Verify the shape key values.
|
|
bpy.context.scene.frame_set(1)
|
|
self.assertAlmostEqual(key.value, .002, 1)
|
|
bpy.context.scene.frame_set(30)
|
|
self.assertAlmostEqual(key.value, .900, 3)
|
|
bpy.context.scene.frame_set(60)
|
|
self.assertAlmostEqual(key.value, .100, 3)
|
|
|
|
def test_import_usd_skel_joints(self):
|
|
"""Test importing USD animated skeleton joints."""
|
|
|
|
infile = str(self.testdir / "arm.usda")
|
|
res = bpy.ops.wm.usd_import(filepath=infile)
|
|
self.assertEqual({'FINISHED'}, res)
|
|
|
|
# Verify armature was imported.
|
|
arm_obj = bpy.data.objects["Skel"]
|
|
self.assertEqual(arm_obj.type, "ARMATURE", "'Skel' object is not an armature")
|
|
|
|
arm = arm_obj.data
|
|
bones = arm.bones
|
|
|
|
# Verify bone parenting.
|
|
self.assertIsNone(bones['Shoulder'].parent, "Shoulder bone should not be parented")
|
|
self.assertEqual(bones['Shoulder'], bones['Elbow'].parent, "Elbow bone should be child of Shoulder bone")
|
|
self.assertEqual(bones['Elbow'], bones['Hand'].parent, "Hand bone should be child of Elbow bone")
|
|
|
|
# Verify armature modifier was created on the mesh.
|
|
mesh_obj = bpy.data.objects['Arm']
|
|
# Get all the armature modifiers on the mesh.
|
|
arm_mods = [m for m in mesh_obj.modifiers if m.type == "ARMATURE"]
|
|
self.assertEqual(len(arm_mods), 1, "Didn't get expected armatrue modifier")
|
|
self.assertEqual(arm_mods[0].object, arm_obj, "Armature modifier does not reference the imported armature")
|
|
|
|
# Verify expected deform groups.
|
|
# There are 4 points in each group.
|
|
for i in range(4):
|
|
self.assertAlmostEqual(mesh_obj.vertex_groups['Hand'].weight(
|
|
i), 1.0, 2, "Unexpected weight for Hand deform vert")
|
|
self.assertAlmostEqual(mesh_obj.vertex_groups['Shoulder'].weight(
|
|
4 + i), 1.0, 2, "Unexpected weight for Shoulder deform vert")
|
|
self.assertAlmostEqual(mesh_obj.vertex_groups['Elbow'].weight(
|
|
8 + i), 1.0, 2, "Unexpected weight for Elbow deform vert")
|
|
|
|
action = bpy.data.actions['SkelAction']
|
|
|
|
# Verify the Elbow joint rotation animation.
|
|
curve_path = 'pose.bones["Elbow"].rotation_quaternion'
|
|
|
|
# Quat W
|
|
f = action.fcurves.find(curve_path, index=0)
|
|
self.assertIsNotNone(f, "Couldn't find Elbow rotation quaternion W curve")
|
|
self.assertAlmostEqual(f.evaluate(0), 1.0, 2, "Unexpected value for rotation quaternion W curve at frame 0")
|
|
self.assertAlmostEqual(f.evaluate(10), 0.707, 2, "Unexpected value for rotation quaternion W curve at frame 10")
|
|
|
|
# Quat X
|
|
f = action.fcurves.find(curve_path, index=1)
|
|
self.assertIsNotNone(f, "Couldn't find Elbow rotation quaternion X curve")
|
|
self.assertAlmostEqual(f.evaluate(0), 0.0, 2, "Unexpected value for rotation quaternion X curve at frame 0")
|
|
self.assertAlmostEqual(f.evaluate(10), 0.707, 2, "Unexpected value for rotation quaternion X curve at frame 10")
|
|
|
|
# Quat Y
|
|
f = action.fcurves.find(curve_path, index=2)
|
|
self.assertIsNotNone(f, "Couldn't find Elbow rotation quaternion Y curve")
|
|
self.assertAlmostEqual(f.evaluate(0), 0.0, 2, "Unexpected value for rotation quaternion Y curve at frame 0")
|
|
self.assertAlmostEqual(f.evaluate(10), 0.0, 2, "Unexpected value for rotation quaternion Y curve at frame 10")
|
|
|
|
# Quat Z
|
|
f = action.fcurves.find(curve_path, index=3)
|
|
self.assertIsNotNone(f, "Couldn't find Elbow rotation quaternion Z curve")
|
|
self.assertAlmostEqual(f.evaluate(0), 0.0, 2, "Unexpected value for rotation quaternion Z curve at frame 0")
|
|
self.assertAlmostEqual(f.evaluate(10), 0.0, 2, "Unexpected value for rotation quaternion Z curve at frame 10")
|
|
|
|
def check_curve(self, blender_curve, usd_curve):
|
|
curve_type_map = {"linear": 1, "cubic": 2}
|
|
cyclic_map = {"nonperiodic": False, "periodic": True}
|
|
|
|
# Check correct spline count.
|
|
blender_spline_count = len(blender_curve.attributes["curve_type"].data)
|
|
usd_spline_count = len(usd_curve.GetCurveVertexCountsAttr().Get())
|
|
self.assertEqual(blender_spline_count, usd_spline_count)
|
|
|
|
# Check correct type of curve. All splines should have the same type and periodicity.
|
|
usd_curve_type = usd_curve.GetTypeAttr().Get()
|
|
usd_cyclic = usd_curve.GetWrapAttr().Get()
|
|
expected_curve_type = curve_type_map[usd_curve_type]
|
|
expected_cyclic = cyclic_map[usd_cyclic]
|
|
|
|
for i in range(0, blender_spline_count):
|
|
blender_curve_type = blender_curve.attributes["curve_type"].data[i].value
|
|
blender_cyclic = False
|
|
if "cyclic" in blender_curve.attributes:
|
|
blender_cyclic = blender_curve.attributes["cyclic"].data[i].value
|
|
|
|
self.assertEqual(blender_curve_type, expected_curve_type)
|
|
self.assertEqual(blender_cyclic, expected_cyclic)
|
|
|
|
# Check position data.
|
|
usd_positions = usd_curve.GetPointsAttr().Get()
|
|
blender_positions = blender_curve.attributes["position"].data
|
|
|
|
point_count = 0
|
|
if usd_curve_type == "linear":
|
|
point_count = len(usd_positions)
|
|
self.assertEqual(len(blender_positions), point_count)
|
|
elif usd_curve_type == "cubic":
|
|
control_point_count = 0
|
|
usd_vert_counts = usd_curve.GetCurveVertexCountsAttr().Get()
|
|
for i in range(0, usd_spline_count):
|
|
if usd_cyclic == "nonperiodic":
|
|
control_point_count += (int(usd_vert_counts[i] / 3) + 1)
|
|
else:
|
|
control_point_count += (int(usd_vert_counts[i] / 3))
|
|
|
|
point_count = control_point_count
|
|
self.assertEqual(len(blender_positions), point_count)
|
|
|
|
# Check radius data.
|
|
usd_width_interpolation = usd_curve.GetWidthsInterpolation()
|
|
usd_radius = [w / 2 for w in usd_curve.GetWidthsAttr().Get()]
|
|
blender_radius = [r.value for r in blender_curve.attributes["radius"].data]
|
|
if usd_curve_type == "linear":
|
|
if usd_width_interpolation == "constant":
|
|
usd_radius = usd_radius * point_count
|
|
|
|
for i in range(0, len(blender_radius)):
|
|
self.assertAlmostEqual(blender_radius[i], usd_radius[i], 2)
|
|
|
|
elif usd_curve_type == "cubic":
|
|
if usd_width_interpolation == "constant":
|
|
usd_radius = usd_radius * point_count
|
|
|
|
for i in range(0, len(blender_radius)):
|
|
self.assertAlmostEqual(blender_radius[i], usd_radius[i], 2)
|
|
elif usd_width_interpolation == "varying":
|
|
# Do a quick min/max sanity check instead of reimplementing width interpolation
|
|
usd_min = min(usd_radius)
|
|
usd_max = max(usd_radius)
|
|
blender_min = min(blender_radius)
|
|
blender_max = max(blender_radius)
|
|
|
|
self.assertAlmostEqual(blender_min, usd_min, 2)
|
|
self.assertAlmostEqual(blender_max, usd_max, 2)
|
|
elif usd_width_interpolation == "vertex":
|
|
# Do a quick check to ensure radius has been set at all
|
|
self.assertEqual(True, all([r > 0 and r < 1 for r in blender_radius]))
|
|
|
|
def test_import_curves_linear(self):
|
|
"""Test importing linear curve variations."""
|
|
|
|
infile = str(self.testdir / "usd_curve_linear_all.usda")
|
|
res = bpy.ops.wm.usd_import(filepath=infile)
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}")
|
|
|
|
curves = [o for o in bpy.data.objects if o.type == 'CURVES']
|
|
self.assertEqual(8, len(curves), f"Test scene {infile} should have 8 curves; found {len(curves)}")
|
|
|
|
stage = Usd.Stage.Open(infile)
|
|
|
|
blender_curve = bpy.data.objects["linear_nonperiodic_single_constant"].data
|
|
usd_prim = stage.GetPrimAtPath("/root/linear_nonperiodic/single/linear_nonperiodic_single_constant")
|
|
self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim))
|
|
|
|
blender_curve = bpy.data.objects["linear_nonperiodic_single_varying"].data
|
|
usd_prim = stage.GetPrimAtPath("/root/linear_nonperiodic/single/linear_nonperiodic_single_varying")
|
|
self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim))
|
|
|
|
blender_curve = bpy.data.objects["linear_nonperiodic_multiple_constant"].data
|
|
usd_prim = stage.GetPrimAtPath("/root/linear_nonperiodic/multiple/linear_nonperiodic_multiple_constant")
|
|
self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim))
|
|
|
|
blender_curve = bpy.data.objects["linear_nonperiodic_multiple_varying"].data
|
|
usd_prim = stage.GetPrimAtPath("/root/linear_nonperiodic/multiple/linear_nonperiodic_multiple_varying")
|
|
self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim))
|
|
|
|
blender_curve = bpy.data.objects["linear_periodic_single_constant"].data
|
|
usd_prim = stage.GetPrimAtPath("/root/linear_periodic/single/linear_periodic_single_constant")
|
|
self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim))
|
|
|
|
blender_curve = bpy.data.objects["linear_periodic_single_varying"].data
|
|
usd_prim = stage.GetPrimAtPath("/root/linear_periodic/single/linear_periodic_single_varying")
|
|
self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim))
|
|
|
|
blender_curve = bpy.data.objects["linear_periodic_multiple_constant"].data
|
|
usd_prim = stage.GetPrimAtPath("/root/linear_periodic/multiple/linear_periodic_multiple_constant")
|
|
self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim))
|
|
|
|
blender_curve = bpy.data.objects["linear_periodic_multiple_varying"].data
|
|
usd_prim = stage.GetPrimAtPath("/root/linear_periodic/multiple/linear_periodic_multiple_varying")
|
|
self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim))
|
|
|
|
def test_import_curves_bezier(self):
|
|
"""Test importing bezier curve variations."""
|
|
|
|
infile = str(self.testdir / "usd_curve_bezier_all.usda")
|
|
res = bpy.ops.wm.usd_import(filepath=infile)
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}")
|
|
|
|
curves = [o for o in bpy.data.objects if o.type == 'CURVES']
|
|
self.assertEqual(12, len(curves), f"Test scene {infile} should have 12 curves; found {len(curves)}")
|
|
|
|
stage = Usd.Stage.Open(infile)
|
|
|
|
blender_curve = bpy.data.objects["bezier_nonperiodic_single_constant"].data
|
|
usd_prim = stage.GetPrimAtPath("/root/bezier_nonperiodic/single/bezier_nonperiodic_single_constant")
|
|
self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim))
|
|
|
|
blender_curve = bpy.data.objects["bezier_nonperiodic_single_varying"].data
|
|
usd_prim = stage.GetPrimAtPath("/root/bezier_nonperiodic/single/bezier_nonperiodic_single_varying")
|
|
self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim))
|
|
|
|
blender_curve = bpy.data.objects["bezier_nonperiodic_single_vertex"].data
|
|
usd_prim = stage.GetPrimAtPath("/root/bezier_nonperiodic/single/bezier_nonperiodic_single_vertex")
|
|
self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim))
|
|
|
|
blender_curve = bpy.data.objects["bezier_nonperiodic_multiple_constant"].data
|
|
usd_prim = stage.GetPrimAtPath("/root/bezier_nonperiodic/multiple/bezier_nonperiodic_multiple_constant")
|
|
self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim))
|
|
|
|
blender_curve = bpy.data.objects["bezier_nonperiodic_multiple_varying"].data
|
|
usd_prim = stage.GetPrimAtPath("/root/bezier_nonperiodic/multiple/bezier_nonperiodic_multiple_varying")
|
|
self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim))
|
|
|
|
blender_curve = bpy.data.objects["bezier_nonperiodic_multiple_vertex"].data
|
|
usd_prim = stage.GetPrimAtPath("/root/bezier_nonperiodic/multiple/bezier_nonperiodic_multiple_vertex")
|
|
self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim))
|
|
|
|
blender_curve = bpy.data.objects["bezier_periodic_single_constant"].data
|
|
usd_prim = stage.GetPrimAtPath("/root/bezier_periodic/single/bezier_periodic_single_constant")
|
|
self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim))
|
|
|
|
blender_curve = bpy.data.objects["bezier_periodic_single_varying"].data
|
|
usd_prim = stage.GetPrimAtPath("/root/bezier_periodic/single/bezier_periodic_single_varying")
|
|
self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim))
|
|
|
|
blender_curve = bpy.data.objects["bezier_periodic_single_vertex"].data
|
|
usd_prim = stage.GetPrimAtPath("/root/bezier_periodic/single/bezier_periodic_single_vertex")
|
|
self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim))
|
|
|
|
blender_curve = bpy.data.objects["bezier_periodic_multiple_constant"].data
|
|
usd_prim = stage.GetPrimAtPath("/root/bezier_periodic/multiple/bezier_periodic_multiple_constant")
|
|
self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim))
|
|
|
|
blender_curve = bpy.data.objects["bezier_periodic_multiple_varying"].data
|
|
usd_prim = stage.GetPrimAtPath("/root/bezier_periodic/multiple/bezier_periodic_multiple_varying")
|
|
self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim))
|
|
|
|
blender_curve = bpy.data.objects["bezier_periodic_multiple_vertex"].data
|
|
usd_prim = stage.GetPrimAtPath("/root/bezier_periodic/multiple/bezier_periodic_multiple_vertex")
|
|
self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim))
|
|
|
|
def test_import_point_instancer(self):
|
|
"""Test importing a typical point instancer setup."""
|
|
|
|
infile = str(self.testdir / "usd_nested_point_instancer.usda")
|
|
res = bpy.ops.wm.usd_import(filepath=infile)
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}")
|
|
|
|
pointclouds = [o for o in bpy.data.objects if o.type == 'POINTCLOUD']
|
|
self.assertEqual(
|
|
2,
|
|
len(pointclouds),
|
|
f"Test scene {infile} should have 2 pointclouds; found {len(pointclouds)}")
|
|
|
|
vertical_points = len(bpy.data.pointclouds['verticalpoints'].attributes["position"].data)
|
|
horizontal_points = len(bpy.data.pointclouds['horizontalpoints'].attributes["position"].data)
|
|
self.assertEqual(3, vertical_points)
|
|
self.assertEqual(2, horizontal_points)
|
|
|
|
def test_import_light_types(self):
|
|
"""Test importing light types and attributes."""
|
|
|
|
def rename_active(new_name):
|
|
active_ob = bpy.context.view_layer.objects.active
|
|
active_ob.name = new_name
|
|
active_ob.data.name = new_name
|
|
|
|
# Use the current scene to first create and export the lights
|
|
bpy.ops.object.light_add(type='POINT', align='WORLD', location=(0, 0, 0), scale=(1, 1, 1))
|
|
bpy.context.active_object.data.energy = 2
|
|
bpy.context.active_object.data.shadow_soft_size = 2.2
|
|
|
|
bpy.ops.object.light_add(type='SPOT', align='WORLD', location=(0, 0, 0), scale=(1, 1, 1))
|
|
rename_active("Spot")
|
|
bpy.context.active_object.data.energy = 3
|
|
bpy.context.active_object.data.shadow_soft_size = 3.3
|
|
bpy.context.active_object.data.spot_blend = 0.25
|
|
bpy.context.active_object.data.spot_size = math.radians(60)
|
|
|
|
bpy.ops.object.light_add(type='SPOT', align='WORLD', location=(0, 0, 0), scale=(1, 1, 1))
|
|
rename_active("Spot_point")
|
|
bpy.context.active_object.data.energy = 3.5
|
|
bpy.context.active_object.data.shadow_soft_size = 0
|
|
bpy.context.active_object.data.spot_blend = 0.25
|
|
bpy.context.active_object.data.spot_size = math.radians(60)
|
|
|
|
bpy.ops.object.light_add(type='SUN', align='WORLD', location=(0, 0, 0), scale=(1, 1, 1))
|
|
bpy.context.active_object.data.energy = 4
|
|
bpy.context.active_object.data.angle = math.radians(1)
|
|
|
|
bpy.ops.object.light_add(type='AREA', align='WORLD', location=(0, 0, 0), scale=(1, 1, 1))
|
|
rename_active("Area_rect")
|
|
bpy.context.active_object.data.energy = 5
|
|
bpy.context.active_object.data.shape = 'RECTANGLE'
|
|
bpy.context.active_object.data.size = 0.5
|
|
bpy.context.active_object.data.size_y = 1.5
|
|
|
|
bpy.ops.object.light_add(type='AREA', align='WORLD', location=(0, 0, 0), scale=(1, 1, 1))
|
|
rename_active("Area_square")
|
|
bpy.context.active_object.data.energy = 5.5
|
|
bpy.context.active_object.data.shape = 'SQUARE'
|
|
bpy.context.active_object.data.size = 0.7
|
|
|
|
bpy.ops.object.light_add(type='AREA', align='WORLD', location=(0, 0, 0), scale=(1, 1, 1))
|
|
rename_active("Area_disk")
|
|
bpy.context.active_object.data.energy = 6
|
|
bpy.context.active_object.data.shape = 'DISK'
|
|
bpy.context.active_object.data.size = 2
|
|
|
|
bpy.ops.object.light_add(type='AREA', align='WORLD', location=(0, 0, 0), scale=(1, 1, 1))
|
|
rename_active("Area_ellipse")
|
|
bpy.context.active_object.data.energy = 6.5
|
|
bpy.context.active_object.data.shape = 'ELLIPSE'
|
|
bpy.context.active_object.data.size = 3
|
|
bpy.context.active_object.data.size_y = 5
|
|
|
|
test_path = self.tempdir / "temp_lights.usda"
|
|
res = bpy.ops.wm.usd_export(filepath=str(test_path), evaluation_mode="RENDER")
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to export to {test_path}")
|
|
|
|
# Reload the empty file and import back in
|
|
bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend"))
|
|
infile = str(test_path)
|
|
res = bpy.ops.wm.usd_import(filepath=infile)
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}")
|
|
|
|
lights = [o for o in bpy.data.objects if o.type == 'LIGHT']
|
|
self.assertEqual(8, len(lights), f"Test scene {infile} should have 8 lights; found {len(lights)}")
|
|
|
|
blender_light = bpy.data.lights["Point"]
|
|
self.assertAlmostEqual(blender_light.energy, 2, 3)
|
|
self.assertAlmostEqual(blender_light.shadow_soft_size, 2.2, 3)
|
|
|
|
blender_light = bpy.data.lights["Spot"]
|
|
self.assertAlmostEqual(blender_light.energy, 3, 3)
|
|
self.assertAlmostEqual(blender_light.shadow_soft_size, 3.3, 3)
|
|
self.assertAlmostEqual(blender_light.spot_blend, 0.25, 3)
|
|
self.assertAlmostEqual(blender_light.spot_size, math.radians(60), 3)
|
|
|
|
blender_light = bpy.data.lights["Spot_point"]
|
|
self.assertAlmostEqual(blender_light.energy, 3.5, 3)
|
|
self.assertAlmostEqual(blender_light.shadow_soft_size, 0, 3)
|
|
self.assertAlmostEqual(blender_light.spot_blend, 0.25, 3)
|
|
self.assertAlmostEqual(blender_light.spot_size, math.radians(60), 3)
|
|
|
|
blender_light = bpy.data.lights["Sun"]
|
|
self.assertAlmostEqual(blender_light.energy, 4, 3)
|
|
self.assertAlmostEqual(blender_light.angle, math.radians(1), 3)
|
|
|
|
blender_light = bpy.data.lights["Area_rect"]
|
|
self.assertAlmostEqual(blender_light.energy, 5, 3)
|
|
self.assertEqual(blender_light.shape, 'RECTANGLE')
|
|
self.assertAlmostEqual(blender_light.size, 0.5, 3)
|
|
self.assertAlmostEqual(blender_light.size_y, 1.5, 3)
|
|
|
|
blender_light = bpy.data.lights["Area_square"]
|
|
self.assertAlmostEqual(blender_light.energy, 5.5, 3)
|
|
self.assertEqual(blender_light.shape, 'RECTANGLE') # We read as rectangle to mirror what USD supports
|
|
self.assertAlmostEqual(blender_light.size, 0.7, 3)
|
|
|
|
blender_light = bpy.data.lights["Area_disk"]
|
|
self.assertAlmostEqual(blender_light.energy, 6, 3)
|
|
self.assertEqual(blender_light.shape, 'DISK')
|
|
self.assertAlmostEqual(blender_light.size, 2, 3)
|
|
|
|
blender_light = bpy.data.lights["Area_ellipse"]
|
|
self.assertAlmostEqual(blender_light.energy, 6.5, 3)
|
|
self.assertEqual(blender_light.shape, 'DISK') # We read as disk to mirror what USD supports
|
|
self.assertAlmostEqual(blender_light.size, 4, 3)
|
|
|
|
def check_attribute(self, blender_data, attribute_name, domain, data_type, elements_len):
|
|
attr = blender_data.attributes[attribute_name]
|
|
self.assertEqual(attr.domain, domain)
|
|
self.assertEqual(attr.data_type, data_type)
|
|
self.assertEqual(len(attr.data), elements_len)
|
|
|
|
def check_attribute_missing(self, blender_data, attribute_name):
|
|
self.assertFalse(attribute_name in blender_data.attributes)
|
|
|
|
def test_import_attributes(self):
|
|
"""Test importing objects with all attribute data types."""
|
|
|
|
# Use the existing attributes test file to create the USD file
|
|
# for import. It is validated as part of the bl_usd_export test.
|
|
bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "usd_attribute_test.blend"))
|
|
|
|
testfile = str(self.tempdir / "usd_attribute_test.usda")
|
|
res = bpy.ops.wm.usd_export(filepath=testfile, evaluation_mode="RENDER")
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to export to {testfile}")
|
|
|
|
# Reload the empty file and import back in
|
|
bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend"))
|
|
res = bpy.ops.wm.usd_import(filepath=testfile)
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {testfile}")
|
|
|
|
# Verify all attributes on the Mesh
|
|
# Note: USD does not support signed 8-bit types so there is
|
|
# currently no equivalent to Blender's INT8 data type
|
|
# TODO: Blender is missing support for reading USD quat/matrix data types
|
|
mesh = bpy.data.objects["Mesh"].data
|
|
|
|
self.check_attribute(mesh, "p_bool", 'POINT', 'BOOLEAN', 4)
|
|
self.check_attribute(mesh, "p_int8", 'POINT', 'INT8', 4)
|
|
self.check_attribute(mesh, "p_int32", 'POINT', 'INT', 4)
|
|
self.check_attribute(mesh, "p_float", 'POINT', 'FLOAT', 4)
|
|
self.check_attribute(mesh, "p_byte_color", 'POINT', 'FLOAT_COLOR', 4)
|
|
self.check_attribute(mesh, "p_color", 'POINT', 'FLOAT_COLOR', 4)
|
|
self.check_attribute(mesh, "p_vec2", 'CORNER', 'FLOAT2', 4) # TODO: Bug - wrong domain
|
|
self.check_attribute(mesh, "p_vec3", 'POINT', 'FLOAT_VECTOR', 4)
|
|
self.check_attribute_missing(mesh, "p_quat")
|
|
self.check_attribute_missing(mesh, "p_mat4x4")
|
|
|
|
self.check_attribute(mesh, "f_bool", 'FACE', 'BOOLEAN', 1)
|
|
self.check_attribute(mesh, "f_int8", 'FACE', 'INT8', 1)
|
|
self.check_attribute(mesh, "f_int32", 'FACE', 'INT', 1)
|
|
self.check_attribute(mesh, "f_float", 'FACE', 'FLOAT', 1)
|
|
self.check_attribute(mesh, "f_byte_color", 'FACE', 'FLOAT_COLOR', 1)
|
|
self.check_attribute(mesh, "f_color", 'FACE', 'FLOAT_COLOR', 1)
|
|
self.check_attribute(mesh, "f_vec2", 'FACE', 'FLOAT2', 1)
|
|
self.check_attribute(mesh, "f_vec3", 'FACE', 'FLOAT_VECTOR', 1)
|
|
self.check_attribute_missing(mesh, "f_quat")
|
|
self.check_attribute_missing(mesh, "f_mat4x4")
|
|
|
|
self.check_attribute(mesh, "fc_bool", 'CORNER', 'BOOLEAN', 4)
|
|
self.check_attribute(mesh, "fc_int8", 'CORNER', 'INT8', 4)
|
|
self.check_attribute(mesh, "fc_int32", 'CORNER', 'INT', 4)
|
|
self.check_attribute(mesh, "fc_float", 'CORNER', 'FLOAT', 4)
|
|
self.check_attribute(mesh, "fc_byte_color", 'CORNER', 'FLOAT_COLOR', 4)
|
|
self.check_attribute(mesh, "fc_color", 'CORNER', 'FLOAT_COLOR', 4)
|
|
self.check_attribute(mesh, "displayColor", 'CORNER', 'FLOAT_COLOR', 4)
|
|
self.check_attribute(mesh, "fc_vec2", 'CORNER', 'FLOAT2', 4)
|
|
self.check_attribute(mesh, "fc_vec3", 'CORNER', 'FLOAT_VECTOR', 4)
|
|
self.check_attribute_missing(mesh, "fc_quat")
|
|
self.check_attribute_missing(mesh, "fc_mat4x4")
|
|
|
|
# Find the non "bezier" Curves object -- Has 2 curves (12 vertices each)
|
|
all_curves = [o for o in bpy.data.objects if o.type == 'CURVES']
|
|
curves = [o for o in all_curves if not o.parent.name.startswith("Curve_bezier")]
|
|
curves = curves[0].data
|
|
|
|
self.check_attribute(curves, "p_bool", 'POINT', 'BOOLEAN', 24)
|
|
self.check_attribute(curves, "p_int8", 'POINT', 'INT8', 24)
|
|
self.check_attribute(curves, "p_int32", 'POINT', 'INT', 24)
|
|
self.check_attribute(curves, "p_float", 'POINT', 'FLOAT', 24)
|
|
self.check_attribute(curves, "p_byte_color", 'POINT', 'FLOAT_COLOR', 24)
|
|
self.check_attribute(curves, "p_color", 'POINT', 'FLOAT_COLOR', 24)
|
|
self.check_attribute(curves, "p_vec2", 'POINT', 'FLOAT2', 24)
|
|
self.check_attribute(curves, "p_vec3", 'POINT', 'FLOAT_VECTOR', 24)
|
|
self.check_attribute(curves, "p_quat", 'POINT', 'QUATERNION', 24)
|
|
self.check_attribute_missing(curves, "p_mat4x4")
|
|
|
|
self.check_attribute(curves, "sp_bool", 'CURVE', 'BOOLEAN', 2)
|
|
self.check_attribute(curves, "sp_int8", 'CURVE', 'INT8', 2)
|
|
self.check_attribute(curves, "sp_int32", 'CURVE', 'INT', 2)
|
|
self.check_attribute(curves, "sp_float", 'CURVE', 'FLOAT', 2)
|
|
self.check_attribute(curves, "sp_byte_color", 'CURVE', 'FLOAT_COLOR', 2)
|
|
self.check_attribute(curves, "sp_color", 'CURVE', 'FLOAT_COLOR', 2)
|
|
self.check_attribute(curves, "sp_vec2", 'CURVE', 'FLOAT2', 2)
|
|
self.check_attribute(curves, "sp_vec3", 'CURVE', 'FLOAT_VECTOR', 2)
|
|
self.check_attribute(curves, "sp_quat", 'CURVE', 'QUATERNION', 2)
|
|
self.check_attribute_missing(curves, "sp_mat4x4")
|
|
|
|
# Find the "bezier" Curves object -- Has 3 curves (2, 3, and 5 control points)
|
|
curves = [o for o in all_curves if o.parent.name.startswith("Curve_bezier")]
|
|
curves = curves[0].data
|
|
|
|
self.check_attribute(curves, "p_bool", 'POINT', 'BOOLEAN', 10)
|
|
self.check_attribute(curves, "p_int8", 'POINT', 'INT8', 10)
|
|
self.check_attribute(curves, "p_int32", 'POINT', 'INT', 10)
|
|
self.check_attribute(curves, "p_float", 'POINT', 'FLOAT', 10)
|
|
self.check_attribute(curves, "p_byte_color", 'POINT', 'FLOAT_COLOR', 10)
|
|
self.check_attribute(curves, "p_color", 'POINT', 'FLOAT_COLOR', 10)
|
|
self.check_attribute(curves, "p_vec2", 'POINT', 'FLOAT2', 10)
|
|
self.check_attribute(curves, "p_vec3", 'POINT', 'FLOAT_VECTOR', 10)
|
|
self.check_attribute(curves, "p_quat", 'POINT', 'QUATERNION', 10)
|
|
self.check_attribute_missing(curves, "p_mat4x4")
|
|
|
|
self.check_attribute(curves, "sp_bool", 'CURVE', 'BOOLEAN', 3)
|
|
self.check_attribute(curves, "sp_int8", 'CURVE', 'INT8', 3)
|
|
self.check_attribute(curves, "sp_int32", 'CURVE', 'INT', 3)
|
|
self.check_attribute(curves, "sp_float", 'CURVE', 'FLOAT', 3)
|
|
self.check_attribute(curves, "sp_byte_color", 'CURVE', 'FLOAT_COLOR', 3)
|
|
self.check_attribute(curves, "sp_color", 'CURVE', 'FLOAT_COLOR', 3)
|
|
self.check_attribute(curves, "sp_vec2", 'CURVE', 'FLOAT2', 3)
|
|
self.check_attribute(curves, "sp_vec3", 'CURVE', 'FLOAT_VECTOR', 3)
|
|
self.check_attribute(curves, "sp_quat", 'CURVE', 'QUATERNION', 3)
|
|
self.check_attribute_missing(curves, "sp_mat4x4")
|
|
|
|
def test_import_attributes_varying(self):
|
|
"""Test importing objects with time-varying positions, velocities, and attributes."""
|
|
|
|
# Use the existing attributes test file to create the USD file
|
|
# for import. It is validated as part of the bl_usd_export test.
|
|
bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "usd_attribute_varying_test.blend"))
|
|
for frame in range(1, 16):
|
|
bpy.context.scene.frame_set(frame)
|
|
bpy.context.scene.frame_set(1)
|
|
|
|
testfile = str(self.tempdir / "usd_attribute_varying_test.usda")
|
|
res = bpy.ops.wm.usd_export(filepath=testfile, export_animation=True, evaluation_mode="RENDER")
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to export to {testfile}")
|
|
|
|
# Reload the empty file and import back in
|
|
bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend"))
|
|
res = bpy.ops.wm.usd_import(filepath=testfile)
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {testfile}")
|
|
|
|
stage = Usd.Stage.Open(testfile)
|
|
|
|
#
|
|
# Validate Mesh data
|
|
#
|
|
blender_mesh = [bpy.data.objects["mesh1"], bpy.data.objects["mesh2"], bpy.data.objects["mesh3"]]
|
|
usd_mesh = [UsdGeom.Mesh(stage.GetPrimAtPath("/root/mesh1/mesh1")),
|
|
UsdGeom.Mesh(stage.GetPrimAtPath("/root/mesh2/mesh2")),
|
|
UsdGeom.Mesh(stage.GetPrimAtPath("/root/mesh3/mesh3"))]
|
|
mesh_num = len(blender_mesh)
|
|
|
|
# A MeshSequenceCache modifier should be present on every imported object
|
|
for i in range(0, mesh_num):
|
|
self.assertTrue(len(blender_mesh[i].modifiers) == 1 and blender_mesh[i].modifiers[0].type ==
|
|
'MESH_SEQUENCE_CACHE', f"{blender_mesh[i].name} has incorrect modifiers")
|
|
|
|
# Compare Blender and USD data against each other for every frame
|
|
for frame in range(1, 16):
|
|
bpy.context.scene.frame_set(frame)
|
|
depsgraph = bpy.context.evaluated_depsgraph_get()
|
|
for i in range(0, mesh_num):
|
|
blender_mesh[i] = bpy.data.objects["mesh" + str(i + 1)].evaluated_get(depsgraph)
|
|
|
|
# Check positions, velocity, and test data
|
|
for i in range(0, mesh_num):
|
|
blender_pos_data = [self.round_vector(d.vector)
|
|
for d in blender_mesh[i].data.attributes["position"].data]
|
|
blender_vel_data = [self.round_vector(d.vector)
|
|
for d in blender_mesh[i].data.attributes["velocity"].data]
|
|
blender_test_data = [round(d.value, 5) for d in blender_mesh[i].data.attributes["test"].data]
|
|
usd_pos_data = [self.round_vector(d) for d in usd_mesh[i].GetPointsAttr().Get(frame)]
|
|
usd_vel_data = [self.round_vector(d) for d in usd_mesh[i].GetVelocitiesAttr().Get(frame)]
|
|
usd_test_data = [round(d, 5) for d in UsdGeom.PrimvarsAPI(usd_mesh[i]).GetPrimvar("test").Get(frame)]
|
|
|
|
self.assertEqual(
|
|
blender_pos_data,
|
|
usd_pos_data,
|
|
f"Frame {frame}: {blender_mesh[i].name} positions do not match")
|
|
self.assertEqual(
|
|
blender_vel_data,
|
|
usd_vel_data,
|
|
f"Frame {frame}: {blender_mesh[i].name} velocities do not match")
|
|
self.assertEqual(
|
|
blender_test_data,
|
|
usd_test_data,
|
|
f"Frame {frame}: {blender_mesh[i].name} test attributes do not match")
|
|
|
|
#
|
|
# Validate Point Cloud data
|
|
#
|
|
blender_pointclouds = [
|
|
bpy.data.objects["PointCloud"],
|
|
bpy.data.objects["PointCloud.001"],
|
|
bpy.data.objects["PointCloud.002"],
|
|
bpy.data.objects["PointCloud.003"]]
|
|
usd_points = [UsdGeom.Points(stage.GetPrimAtPath("/root/pointcloud1/PointCloud")),
|
|
UsdGeom.Points(stage.GetPrimAtPath("/root/pointcloud2/PointCloud")),
|
|
UsdGeom.Points(stage.GetPrimAtPath("/root/pointcloud3/PointCloud")),
|
|
UsdGeom.Points(stage.GetPrimAtPath("/root/pointcloud4/PointCloud"))]
|
|
pointclouds_num = len(blender_pointclouds)
|
|
|
|
# Workaround: GeometrySet processing loses the data-block name on export. This is why the
|
|
# .001 etc. names are being used above. Since we need the order of Blender objects to match
|
|
# the order of USD prims, sort by the Y location to make them match in our test setup.
|
|
blender_pointclouds.sort(key=lambda ob: ob.location.y)
|
|
|
|
# A MeshSequenceCache modifier should be present on every imported object
|
|
for i in range(0, pointclouds_num):
|
|
self.assertTrue(len(blender_pointclouds[i].modifiers) == 1 and blender_pointclouds[i].modifiers[0].type ==
|
|
'MESH_SEQUENCE_CACHE', f"{blender_pointclouds[i].name} has incorrect modifiers")
|
|
|
|
# Compare Blender and USD data against each other for every frame
|
|
for frame in range(1, 16):
|
|
bpy.context.scene.frame_set(frame)
|
|
depsgraph = bpy.context.evaluated_depsgraph_get()
|
|
for i in range(0, mesh_num):
|
|
blender_pointclouds[i] = blender_pointclouds[i].evaluated_get(depsgraph)
|
|
|
|
# Check positions, velocity, radius, and test data
|
|
for i in range(0, mesh_num):
|
|
blender_pos_data = [self.round_vector(d.vector)
|
|
for d in blender_pointclouds[i].data.attributes["position"].data]
|
|
blender_vel_data = [self.round_vector(d.vector)
|
|
for d in blender_pointclouds[i].data.attributes["velocity"].data]
|
|
blender_radius_data = [round(d.value, 5) for d in blender_pointclouds[i].data.attributes["radius"].data]
|
|
blender_test_data = [round(d.value, 5) for d in blender_pointclouds[i].data.attributes["test"].data]
|
|
usd_pos_data = [self.round_vector(d) for d in usd_points[i].GetPointsAttr().Get(frame)]
|
|
usd_vel_data = [self.round_vector(d) for d in usd_points[i].GetVelocitiesAttr().Get(frame)]
|
|
usd_radius_data = [round(d / 2, 5) for d in usd_points[i].GetWidthsAttr().Get(frame)]
|
|
usd_test_data = [round(d, 5) for d in UsdGeom.PrimvarsAPI(usd_points[i]).GetPrimvar("test").Get(frame)]
|
|
|
|
name = usd_points[i].GetPath().GetParentPath().name
|
|
self.assertEqual(
|
|
blender_pos_data,
|
|
usd_pos_data,
|
|
f"Frame {frame}: {name} positions do not match")
|
|
self.assertEqual(
|
|
blender_vel_data,
|
|
usd_vel_data,
|
|
f"Frame {frame}: {name} velocities do not match")
|
|
self.assertEqual(
|
|
blender_radius_data,
|
|
usd_radius_data,
|
|
f"Frame {frame}: {name} radii do not match")
|
|
self.assertEqual(
|
|
blender_test_data,
|
|
usd_test_data,
|
|
f"Frame {frame}: {name} test attributes do not match")
|
|
|
|
def test_import_shapes(self):
|
|
"""Test importing USD Shape prims with time-varying attributes."""
|
|
|
|
infile = str(self.testdir / "usd_shapes_test.usda")
|
|
res = bpy.ops.wm.usd_import(filepath=infile)
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}")
|
|
|
|
# Ensure we find the expected number of mesh objects
|
|
blender_objects = [ob for ob in bpy.data.objects if ob.type == 'MESH']
|
|
self.assertEqual(
|
|
6,
|
|
len(blender_objects),
|
|
f"Test scene {infile} should have 6 mesh objects; found {len(blender_objects)}")
|
|
|
|
# A MeshSequenceCache modifier should be present on every imported object
|
|
for ob in blender_objects:
|
|
self.assertTrue(len(ob.modifiers) == 1 and ob.modifiers[0].type ==
|
|
'MESH_SEQUENCE_CACHE', f"{ob.name} has incorrect modifiers")
|
|
|
|
def test_import_collection_creation(self):
|
|
"""Test that the 'create_collection' option functions correctly."""
|
|
|
|
# Any USD file will do
|
|
infile = str(self.testdir / "usd_shapes_test.usda")
|
|
|
|
# Import the file more than once to ensure the auto generated Collection name is unique
|
|
# and no naming conflicts occur
|
|
res = bpy.ops.wm.usd_import(filepath=infile, create_collection=True)
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}")
|
|
res = bpy.ops.wm.usd_import(filepath=infile, create_collection=True)
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}")
|
|
|
|
# Validate the correct user count for each Collection and ensure the objects were
|
|
# placed inside each one.
|
|
self.assertEqual(len(bpy.data.collections), 2)
|
|
self.assertEqual(bpy.data.collections["Usd Shapes Test"].users, 1)
|
|
self.assertEqual(bpy.data.collections["Usd Shapes Test.001"].users, 1)
|
|
self.assertEqual(len(bpy.data.collections["Usd Shapes Test"].all_objects), 7)
|
|
self.assertEqual(len(bpy.data.collections["Usd Shapes Test.001"].all_objects), 7)
|
|
|
|
def test_import_id_props(self):
|
|
"""Test importing object and data IDProperties."""
|
|
|
|
# Create our set of ID's with all relevant IDProperty types/values that we support
|
|
bpy.ops.object.empty_add()
|
|
bpy.ops.object.light_add()
|
|
bpy.ops.object.camera_add()
|
|
bpy.ops.mesh.primitive_plane_add()
|
|
|
|
ids = [ob if ob.type == 'EMPTY' else ob.data for ob in bpy.data.objects]
|
|
properties = [
|
|
True, "string", 1, 2.0, [1, 2], [1, 2, 3], [1, 2, 3, 4], [1.0, 2.0], [1.0, 2.0, 3.0], [1.0, 2.0, 3.0, 4.0]
|
|
]
|
|
for id in ids:
|
|
for i, p in enumerate(properties):
|
|
prop_name = "prop" + str(i)
|
|
id[prop_name] = p
|
|
|
|
# Export out this scene twice so we can test both the default "userProperties" namespace as
|
|
# well as a custom namespace
|
|
test_path1 = self.tempdir / "temp_idprops_userProperties_test.usda"
|
|
res = bpy.ops.wm.usd_export(filepath=str(test_path1), evaluation_mode="RENDER")
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to export to {test_path1}")
|
|
|
|
custom_namespace = "customns"
|
|
test_path2 = self.tempdir / "temp_idprops_customns_test.usda"
|
|
res = bpy.ops.wm.usd_export(
|
|
filepath=str(test_path2),
|
|
custom_properties_namespace=custom_namespace,
|
|
evaluation_mode="RENDER")
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to export to {test_path2}")
|
|
|
|
# Also write out another file using attribute types not natively writable by Blender
|
|
test_path3 = self.tempdir / "temp_idprops_extended_test.usda"
|
|
stage = Usd.Stage.CreateNew(str(test_path3))
|
|
xform = UsdGeom.Xform.Define(stage, '/empty')
|
|
xform.GetPrim().CreateAttribute("prop0", Sdf.ValueTypeNames.Half).Set(0.5)
|
|
xform.GetPrim().CreateAttribute("prop1", Sdf.ValueTypeNames.Float).Set(1.5)
|
|
xform.GetPrim().CreateAttribute("prop2", Sdf.ValueTypeNames.Token).Set("tokenstring")
|
|
xform.GetPrim().CreateAttribute("prop3", Sdf.ValueTypeNames.Asset).Set("assetstring")
|
|
xform.GetPrim().CreateAttribute("prop4", Sdf.ValueTypeNames.Half2).Set(Gf.Vec2h(0, 1))
|
|
xform.GetPrim().CreateAttribute("prop5", Sdf.ValueTypeNames.Half3).Set(Gf.Vec3h(0, 1, 2))
|
|
xform.GetPrim().CreateAttribute("prop6", Sdf.ValueTypeNames.Half4).Set(Gf.Vec4h(0, 1, 2, 3))
|
|
xform.GetPrim().CreateAttribute("prop7", Sdf.ValueTypeNames.Float2).Set(Gf.Vec2f(0, 1))
|
|
xform.GetPrim().CreateAttribute("prop8", Sdf.ValueTypeNames.Float3).Set(Gf.Vec3f(0, 1, 2))
|
|
xform.GetPrim().CreateAttribute("prop9", Sdf.ValueTypeNames.Float4).Set(Gf.Vec4f(0, 1, 2, 3))
|
|
stage.GetRootLayer().Save()
|
|
|
|
# Helper functions to check IDProperty validity
|
|
import idprop
|
|
|
|
def assert_all_props_present(properties, ns):
|
|
ids = [ob if ob.type == 'EMPTY' else ob.data for ob in bpy.data.objects]
|
|
for id in ids:
|
|
for i, p in enumerate(properties):
|
|
prop_name = (ns + ":" if ns != "" else "") + "prop" + str(i)
|
|
prop = id[prop_name]
|
|
value = prop.to_list() if type(prop) is idprop.types.IDPropertyArray else prop
|
|
self.assertEqual(p, value, f"Property {prop_name} is incorrect")
|
|
|
|
def assert_no_props_present(properties, ns):
|
|
ids = [ob if ob.type == 'EMPTY' else ob.data for ob in bpy.data.objects]
|
|
for id in ids:
|
|
for i, p in enumerate(properties):
|
|
prop_name = (ns + ":" if ns != "" else "") + "prop" + str(i)
|
|
self.assertTrue(id.get(prop_name) is None, f"Property {prop_name} should not be present")
|
|
|
|
# Reload the empty file and test the relevant combinations of namespaces and import modes
|
|
|
|
infile = str(test_path1)
|
|
bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend"))
|
|
res = bpy.ops.wm.usd_import(filepath=infile, attr_import_mode='USER')
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}")
|
|
self.assertEqual(len(bpy.data.objects), 4)
|
|
assert_all_props_present(properties, "")
|
|
|
|
infile = str(test_path1)
|
|
bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend"))
|
|
res = bpy.ops.wm.usd_import(filepath=infile, attr_import_mode='NONE')
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}")
|
|
self.assertEqual(len(bpy.data.objects), 4)
|
|
assert_no_props_present(properties, "")
|
|
|
|
infile = str(test_path2)
|
|
bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend"))
|
|
res = bpy.ops.wm.usd_import(filepath=infile, attr_import_mode='ALL')
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}")
|
|
self.assertEqual(len(bpy.data.objects), 4)
|
|
assert_all_props_present(properties, custom_namespace)
|
|
|
|
infile = str(test_path2)
|
|
bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend"))
|
|
res = bpy.ops.wm.usd_import(filepath=infile, attr_import_mode='USER')
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}")
|
|
self.assertEqual(len(bpy.data.objects), 4)
|
|
assert_no_props_present(properties, custom_namespace)
|
|
|
|
infile = str(test_path3)
|
|
bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend"))
|
|
res = bpy.ops.wm.usd_import(filepath=infile, attr_import_mode='ALL')
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}")
|
|
self.assertEqual(len(bpy.data.objects), 1)
|
|
properties = [
|
|
0.5, 1.5, "tokenstring", "assetstring", [0, 1], [0, 1, 2], [0, 1, 2, 3], [0, 1], [0, 1, 2], [0, 1, 2, 3]
|
|
]
|
|
assert_all_props_present(properties, "")
|
|
|
|
def test_import_usdz_image_processing(self):
|
|
"""Test importing of images from USDZ files in various ways."""
|
|
|
|
# USDZ processing needs the destination directory to exist
|
|
self.tempdir.mkdir(parents=True, exist_ok=True)
|
|
|
|
# Use the existing materials test file to create the USD file
|
|
# for import. It is validated as part of the bl_usd_export test.
|
|
bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "usd_materials_export.blend"))
|
|
usdz1 = str(self.tempdir / "usd_materials_export.usdz")
|
|
res = bpy.ops.wm.usd_export(filepath=usdz1, export_materials=True)
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to export to {usdz1}")
|
|
|
|
usdz2 = str(self.tempdir / "usd_materials_export_downscaled.usdz")
|
|
res = bpy.ops.wm.usd_export(
|
|
filepath=usdz2,
|
|
export_materials=True,
|
|
usdz_downscale_size='CUSTOM',
|
|
usdz_downscale_custom_size=128)
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to export to {usdz2}")
|
|
|
|
def check_image(name, tiles_num, size, is_packed):
|
|
self.assertTrue(name in bpy.data.images)
|
|
|
|
image = bpy.data.images[name]
|
|
self.assertEqual(len(image.tiles), tiles_num)
|
|
self.assertEqual(image.packed_file is not None, is_packed)
|
|
for tile in range(0, tiles_num):
|
|
self.assertEqual(image.tiles[tile].size[0], size)
|
|
self.assertEqual(image.tiles[tile].size[1], size)
|
|
|
|
def check_materials():
|
|
self.assertEqual(len(bpy.data.materials), 7) # +1 because of the "Dots Stroke" material
|
|
self.assertTrue("Clip_With_LessThanInvert" in bpy.data.materials)
|
|
self.assertTrue("Clip_With_Round" in bpy.data.materials)
|
|
self.assertTrue("Material" in bpy.data.materials)
|
|
self.assertTrue("NormalMap" in bpy.data.materials)
|
|
self.assertTrue("NormalMap_Scale_Bias" in bpy.data.materials)
|
|
self.assertTrue("Transforms" in bpy.data.materials)
|
|
|
|
# Reload the empty file and import back in using IMPORT_PACK
|
|
bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend"))
|
|
res = bpy.ops.wm.usd_import(filepath=usdz1, import_textures_mode='IMPORT_PACK')
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {usdz1}")
|
|
|
|
self.assertEqual(len(bpy.data.images), 4)
|
|
check_image("test_grid_<UDIM>.png", 2, 1024, True)
|
|
check_image("test_normal.exr", 1, 128, True)
|
|
check_image("test_normal_invertY.exr", 1, 128, True)
|
|
check_image("color_121212.hdr", 1, 4, True)
|
|
check_materials()
|
|
|
|
# Reload the empty file and import back in using IMPORT_COPY
|
|
bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend"))
|
|
res = bpy.ops.wm.usd_import(
|
|
filepath=usdz2,
|
|
import_textures_mode='IMPORT_COPY',
|
|
import_textures_dir=str(
|
|
self.tempdir))
|
|
self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {usdz2}")
|
|
|
|
self.assertEqual(len(bpy.data.images), 4)
|
|
check_image("test_grid_<UDIM>.png", 2, 128, False)
|
|
check_image("test_normal.exr", 1, 128, False)
|
|
check_image("test_normal_invertY.exr", 1, 128, False)
|
|
check_image("color_121212.hdr", 1, 4, False)
|
|
check_materials()
|
|
|
|
|
|
def main():
|
|
global args
|
|
import argparse
|
|
|
|
if '--' in sys.argv:
|
|
argv = [sys.argv[0]] + sys.argv[sys.argv.index('--') + 1:]
|
|
else:
|
|
argv = sys.argv
|
|
|
|
parser = argparse.ArgumentParser()
|
|
parser.add_argument('--testdir', required=True, type=pathlib.Path)
|
|
args, remaining = parser.parse_known_args(argv)
|
|
|
|
unittest.main(argv=remaining)
|
|
|
|
|
|
if __name__ == "__main__":
|
|
main()
|