Files
test2/source/blender/blenkernel/intern/node_tree_update.cc

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

1247 lines
38 KiB
C++
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0-or-later */
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
#include "BLI_map.hh"
#include "BLI_multi_value_map.hh"
#include "BLI_noise.hh"
#include "BLI_set.hh"
#include "BLI_stack.hh"
#include "BLI_timeit.hh"
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
#include "BLI_vector_set.hh"
#include "DNA_anim_types.h"
#include "DNA_modifier_types.h"
#include "DNA_node_types.h"
#include "BKE_anim_data.h"
#include "BKE_image.h"
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
#include "BKE_main.h"
#include "BKE_node.h"
#include "BKE_node_runtime.hh"
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
#include "BKE_node_tree_update.h"
#include "MOD_nodes.h"
#include "NOD_node_declaration.hh"
Nodes: Use dynamic declarations for group nodes Since a year and a half ago we've been switching to a new way to represent what sockets a node should have called "declarations" that's easier to use, clearer, and more flexible for upcoming features like dynamic socket counts or generic type sockets. All builtin nodes with a static set of sockets have switched, but one missing area has been group nodes and group input/output nodes. These nodes have **dynamic** declarations which change based on their properties or the group they're inside of. This patch addresses that, in preparation for using the same dynamic declaration feature for simulation nodes. Generally there shouldn't be user-visible differences, but one benefit is that user-created socket descriptions are now visible directly in the node editor for group nodes and group input/output nodes. The commit contains a few changes: - Add a node type callback for building dynamic declarations with different arguments - Add an `Extend` socket declaration for the "virtual" sockets used for connecting new links - A similar `Custom` socket declaration is used for addon-defined socket - Simplify the node update loop to use the declaration to build update sockets - Replace the "group update" functions with the declaration building - Move the node group input/output link creation to link drag operator - Make the field status part of group node declarations (not for group input/output nodes though) - Some fixes for declarations to make them update and build properly Differential Revision: https://developer.blender.org/D16850
2023-01-16 15:47:10 -06:00
#include "NOD_socket.h"
#include "NOD_texture.h"
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
#include "DEG_depsgraph_query.h"
using namespace blender::nodes;
/**
* These flags are used by the `changed_flag` field in #bNodeTree, #bNode and #bNodeSocket.
* This enum is not part of the public api. It should be used through the `BKE_ntree_update_tag_*`
* api.
*/
enum eNodeTreeChangedFlag {
NTREE_CHANGED_NOTHING = 0,
NTREE_CHANGED_ANY = (1 << 1),
NTREE_CHANGED_NODE_PROPERTY = (1 << 2),
NTREE_CHANGED_NODE_OUTPUT = (1 << 3),
NTREE_CHANGED_INTERFACE = (1 << 4),
NTREE_CHANGED_LINK = (1 << 5),
NTREE_CHANGED_REMOVED_NODE = (1 << 6),
NTREE_CHANGED_REMOVED_SOCKET = (1 << 7),
NTREE_CHANGED_SOCKET_PROPERTY = (1 << 8),
NTREE_CHANGED_INTERNAL_LINK = (1 << 9),
NTREE_CHANGED_PARENT = (1 << 10),
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
NTREE_CHANGED_ALL = -1,
};
static void add_tree_tag(bNodeTree *ntree, const eNodeTreeChangedFlag flag)
{
ntree->runtime->changed_flag |= flag;
ntree->runtime->topology_cache_mutex.tag_dirty();
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
}
static void add_node_tag(bNodeTree *ntree, bNode *node, const eNodeTreeChangedFlag flag)
{
add_tree_tag(ntree, flag);
node->runtime->changed_flag |= flag;
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
}
static void add_socket_tag(bNodeTree *ntree, bNodeSocket *socket, const eNodeTreeChangedFlag flag)
{
add_tree_tag(ntree, flag);
socket->runtime->changed_flag |= flag;
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
}
namespace blender::bke {
/**
* Common datatype priorities, works for compositor, shader and texture nodes alike
* defines priority of datatype connection based on output type (to):
* `< 0`: never connect these types.
* `>= 0`: priority of connection (higher values chosen first).
*/
static int get_internal_link_type_priority(const bNodeSocketType *from, const bNodeSocketType *to)
{
switch (to->type) {
case SOCK_RGBA:
switch (from->type) {
case SOCK_RGBA:
return 4;
case SOCK_FLOAT:
return 3;
case SOCK_INT:
return 2;
case SOCK_BOOLEAN:
return 1;
}
return -1;
case SOCK_VECTOR:
switch (from->type) {
case SOCK_VECTOR:
return 4;
case SOCK_FLOAT:
return 3;
case SOCK_INT:
return 2;
case SOCK_BOOLEAN:
return 1;
}
return -1;
case SOCK_FLOAT:
switch (from->type) {
case SOCK_FLOAT:
return 5;
case SOCK_INT:
return 4;
case SOCK_BOOLEAN:
return 3;
case SOCK_RGBA:
return 2;
case SOCK_VECTOR:
return 1;
}
return -1;
case SOCK_INT:
switch (from->type) {
case SOCK_INT:
return 5;
case SOCK_FLOAT:
return 4;
case SOCK_BOOLEAN:
return 3;
case SOCK_RGBA:
return 2;
case SOCK_VECTOR:
return 1;
}
return -1;
case SOCK_BOOLEAN:
switch (from->type) {
case SOCK_BOOLEAN:
return 5;
case SOCK_INT:
return 4;
case SOCK_FLOAT:
return 3;
case SOCK_RGBA:
return 2;
case SOCK_VECTOR:
return 1;
}
return -1;
}
/* The rest of the socket types only allow an internal link if both the input and output socket
* have the same type. If the sockets are custom, we check the idname instead. */
if (to->type == from->type && (to->type != SOCK_CUSTOM || STREQ(to->idname, from->idname))) {
return 1;
}
return -1;
}
using TreeNodePair = std::pair<bNodeTree *, bNode *>;
using ObjectModifierPair = std::pair<Object *, ModifierData *>;
using NodeSocketPair = std::pair<bNode *, bNodeSocket *>;
/**
* Cache common data about node trees from the #Main database that is expensive to retrieve on
* demand every time.
*/
struct NodeTreeRelations {
private:
Main *bmain_;
std::optional<Vector<bNodeTree *>> all_trees_;
std::optional<Map<bNodeTree *, ID *>> owner_ids_;
std::optional<MultiValueMap<bNodeTree *, TreeNodePair>> group_node_users_;
std::optional<MultiValueMap<bNodeTree *, ObjectModifierPair>> modifiers_users_;
public:
NodeTreeRelations(Main *bmain) : bmain_(bmain)
{
}
void ensure_all_trees()
{
if (all_trees_.has_value()) {
return;
}
all_trees_.emplace();
owner_ids_.emplace();
if (bmain_ == nullptr) {
return;
}
FOREACH_NODETREE_BEGIN (bmain_, ntree, id) {
all_trees_->append(ntree);
if (&ntree->id != id) {
owner_ids_->add_new(ntree, id);
}
}
FOREACH_NODETREE_END;
}
void ensure_owner_ids()
{
this->ensure_all_trees();
}
void ensure_group_node_users()
{
if (group_node_users_.has_value()) {
return;
}
group_node_users_.emplace();
if (bmain_ == nullptr) {
return;
}
this->ensure_all_trees();
for (bNodeTree *ntree : *all_trees_) {
for (bNode *node : ntree->all_nodes()) {
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
if (node->id == nullptr) {
continue;
}
ID *id = node->id;
if (GS(id->name) == ID_NT) {
bNodeTree *group = (bNodeTree *)id;
group_node_users_->add(group, {ntree, node});
}
}
}
}
void ensure_modifier_users()
{
if (modifiers_users_.has_value()) {
return;
}
modifiers_users_.emplace();
if (bmain_ == nullptr) {
return;
}
LISTBASE_FOREACH (Object *, object, &bmain_->objects) {
LISTBASE_FOREACH (ModifierData *, md, &object->modifiers) {
if (md->type == eModifierType_Nodes) {
NodesModifierData *nmd = (NodesModifierData *)md;
if (nmd->node_group != nullptr) {
modifiers_users_->add(nmd->node_group, {object, md});
}
}
}
}
}
Span<ObjectModifierPair> get_modifier_users(bNodeTree *ntree)
{
BLI_assert(modifiers_users_.has_value());
return modifiers_users_->lookup(ntree);
}
Span<TreeNodePair> get_group_node_users(bNodeTree *ntree)
{
BLI_assert(group_node_users_.has_value());
return group_node_users_->lookup(ntree);
}
ID *get_owner_id(bNodeTree *ntree)
{
BLI_assert(owner_ids_.has_value());
return owner_ids_->lookup_default(ntree, &ntree->id);
}
};
struct TreeUpdateResult {
bool interface_changed = false;
bool output_changed = false;
};
class NodeTreeMainUpdater {
private:
Main *bmain_;
NodeTreeUpdateExtraParams *params_;
Map<bNodeTree *, TreeUpdateResult> update_result_by_tree_;
NodeTreeRelations relations_;
public:
NodeTreeMainUpdater(Main *bmain, NodeTreeUpdateExtraParams *params)
: bmain_(bmain), params_(params), relations_(bmain)
{
}
void update()
{
Vector<bNodeTree *> changed_ntrees;
FOREACH_NODETREE_BEGIN (bmain_, ntree, id) {
if (ntree->runtime->changed_flag != NTREE_CHANGED_NOTHING) {
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
changed_ntrees.append(ntree);
}
}
FOREACH_NODETREE_END;
this->update_rooted(changed_ntrees);
}
void update_rooted(Span<bNodeTree *> root_ntrees)
{
if (root_ntrees.is_empty()) {
return;
}
bool is_single_tree_update = false;
if (root_ntrees.size() == 1) {
bNodeTree *ntree = root_ntrees[0];
if (ntree->runtime->changed_flag == NTREE_CHANGED_NOTHING) {
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
return;
}
const TreeUpdateResult result = this->update_tree(*ntree);
update_result_by_tree_.add_new(ntree, result);
if (!result.interface_changed && !result.output_changed) {
is_single_tree_update = true;
}
}
if (!is_single_tree_update) {
Vector<bNodeTree *> ntrees_in_order = this->get_tree_update_order(root_ntrees);
for (bNodeTree *ntree : ntrees_in_order) {
if (ntree->runtime->changed_flag == NTREE_CHANGED_NOTHING) {
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
continue;
}
if (!update_result_by_tree_.contains(ntree)) {
const TreeUpdateResult result = this->update_tree(*ntree);
update_result_by_tree_.add_new(ntree, result);
}
const TreeUpdateResult result = update_result_by_tree_.lookup(ntree);
Span<TreeNodePair> dependent_trees = relations_.get_group_node_users(ntree);
if (result.output_changed) {
for (const TreeNodePair &pair : dependent_trees) {
add_node_tag(pair.first, pair.second, NTREE_CHANGED_NODE_OUTPUT);
}
}
if (result.interface_changed) {
for (const TreeNodePair &pair : dependent_trees) {
add_node_tag(pair.first, pair.second, NTREE_CHANGED_NODE_PROPERTY);
}
}
}
}
for (const auto item : update_result_by_tree_.items()) {
bNodeTree *ntree = item.key;
const TreeUpdateResult &result = item.value;
this->reset_changed_flags(*ntree);
if (result.interface_changed) {
if (ntree->type == NTREE_GEOMETRY) {
relations_.ensure_modifier_users();
for (const ObjectModifierPair &pair : relations_.get_modifier_users(ntree)) {
Object *object = pair.first;
ModifierData *md = pair.second;
if (md->type == eModifierType_Nodes) {
MOD_nodes_update_interface(object, (NodesModifierData *)md);
}
}
}
}
if (params_) {
relations_.ensure_owner_ids();
ID *id = relations_.get_owner_id(ntree);
if (params_->tree_changed_fn) {
params_->tree_changed_fn(id, ntree, params_->user_data);
}
if (params_->tree_output_changed_fn && result.output_changed) {
params_->tree_output_changed_fn(id, ntree, params_->user_data);
}
}
}
}
private:
enum class ToposortMark {
None,
Temporary,
Permanent,
};
using ToposortMarkMap = Map<bNodeTree *, ToposortMark>;
/**
* Finds all trees that depend on the given trees (through node groups). Then those trees are
* ordered such that all trees used by one tree come before it.
*/
Vector<bNodeTree *> get_tree_update_order(Span<bNodeTree *> root_ntrees)
{
relations_.ensure_group_node_users();
Set<bNodeTree *> trees_to_update = get_trees_to_update(root_ntrees);
Vector<bNodeTree *> sorted_ntrees;
ToposortMarkMap marks;
for (bNodeTree *ntree : trees_to_update) {
marks.add_new(ntree, ToposortMark::None);
}
for (bNodeTree *ntree : trees_to_update) {
if (marks.lookup(ntree) == ToposortMark::None) {
const bool cycle_detected = !this->get_tree_update_order__visit_recursive(
ntree, marks, sorted_ntrees);
/* This should be prevented by higher level operators. */
BLI_assert(!cycle_detected);
UNUSED_VARS_NDEBUG(cycle_detected);
}
}
std::reverse(sorted_ntrees.begin(), sorted_ntrees.end());
return sorted_ntrees;
}
bool get_tree_update_order__visit_recursive(bNodeTree *ntree,
ToposortMarkMap &marks,
Vector<bNodeTree *> &sorted_ntrees)
{
ToposortMark &mark = marks.lookup(ntree);
if (mark == ToposortMark::Permanent) {
return true;
}
if (mark == ToposortMark::Temporary) {
/* There is a dependency cycle. */
return false;
}
mark = ToposortMark::Temporary;
for (const TreeNodePair &pair : relations_.get_group_node_users(ntree)) {
this->get_tree_update_order__visit_recursive(pair.first, marks, sorted_ntrees);
}
sorted_ntrees.append(ntree);
mark = ToposortMark::Permanent;
return true;
}
Set<bNodeTree *> get_trees_to_update(Span<bNodeTree *> root_ntrees)
{
relations_.ensure_group_node_users();
Set<bNodeTree *> reachable_trees;
VectorSet<bNodeTree *> trees_to_check = root_ntrees;
while (!trees_to_check.is_empty()) {
bNodeTree *ntree = trees_to_check.pop();
if (reachable_trees.add(ntree)) {
for (const TreeNodePair &pair : relations_.get_group_node_users(ntree)) {
trees_to_check.add(pair.first);
}
}
}
return reachable_trees;
}
TreeUpdateResult update_tree(bNodeTree &ntree)
{
TreeUpdateResult result;
this->update_socket_link_and_use(ntree);
this->update_individual_nodes(ntree);
this->update_internal_links(ntree);
this->update_generic_callback(ntree);
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
this->remove_unused_previews_when_necessary(ntree);
this->propagate_runtime_flags(ntree);
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
if (ntree.type == NTREE_GEOMETRY) {
if (node_field_inferencing::update_field_inferencing(ntree)) {
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
result.interface_changed = true;
}
if (anonymous_attribute_inferencing::update_anonymous_attribute_relations(ntree)) {
result.interface_changed = true;
}
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
}
result.output_changed = this->check_if_output_changed(ntree);
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
this->update_socket_link_and_use(ntree);
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
this->update_link_validation(ntree);
if (ntree.type == NTREE_TEXTURE) {
ntreeTexCheckCyclics(&ntree);
}
if (ntree.runtime->changed_flag & NTREE_CHANGED_INTERFACE ||
ntree.runtime->changed_flag & NTREE_CHANGED_ANY) {
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
result.interface_changed = true;
}
#ifdef DEBUG
/* Check the uniqueness of node identifiers. */
Set<int32_t> node_identifiers;
const Span<const bNode *> nodes = ntree.all_nodes();
for (const int i : nodes.index_range()) {
const bNode &node = *nodes[i];
BLI_assert(node.identifier > 0);
node_identifiers.add_new(node.identifier);
BLI_assert(node.runtime->index_in_tree == i);
}
#endif
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
return result;
}
void update_socket_link_and_use(bNodeTree &tree)
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
{
tree.ensure_topology_cache();
for (bNodeSocket *socket : tree.all_input_sockets()) {
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
if (socket->directly_linked_links().is_empty()) {
socket->link = nullptr;
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
}
else {
socket->link = socket->directly_linked_links()[0];
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
}
}
this->update_socket_used_tags(tree);
}
void update_socket_used_tags(bNodeTree &tree)
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
{
tree.ensure_topology_cache();
for (bNodeSocket *socket : tree.all_sockets()) {
socket->flag &= ~SOCK_IS_LINKED;
for (const bNodeLink *link : socket->directly_linked_links()) {
if (!link->is_muted()) {
socket->flag |= SOCK_IS_LINKED;
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
break;
}
}
}
}
void update_individual_nodes(bNodeTree &ntree)
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
{
for (bNode *node : ntree.all_nodes()) {
nodeDeclarationEnsure(&ntree, node);
if (this->should_update_individual_node(ntree, *node)) {
bNodeType &ntype = *node->typeinfo;
if (ntype.group_update_func) {
ntype.group_update_func(&ntree, node);
}
if (ntype.updatefunc) {
ntype.updatefunc(&ntree, node);
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
}
Nodes: Use dynamic declarations for group nodes Since a year and a half ago we've been switching to a new way to represent what sockets a node should have called "declarations" that's easier to use, clearer, and more flexible for upcoming features like dynamic socket counts or generic type sockets. All builtin nodes with a static set of sockets have switched, but one missing area has been group nodes and group input/output nodes. These nodes have **dynamic** declarations which change based on their properties or the group they're inside of. This patch addresses that, in preparation for using the same dynamic declaration feature for simulation nodes. Generally there shouldn't be user-visible differences, but one benefit is that user-created socket descriptions are now visible directly in the node editor for group nodes and group input/output nodes. The commit contains a few changes: - Add a node type callback for building dynamic declarations with different arguments - Add an `Extend` socket declaration for the "virtual" sockets used for connecting new links - A similar `Custom` socket declaration is used for addon-defined socket - Simplify the node update loop to use the declaration to build update sockets - Replace the "group update" functions with the declaration building - Move the node group input/output link creation to link drag operator - Make the field status part of group node declarations (not for group input/output nodes though) - Some fixes for declarations to make them update and build properly Differential Revision: https://developer.blender.org/D16850
2023-01-16 15:47:10 -06:00
if (ntype.declare_dynamic) {
nodes::update_node_declaration_and_sockets(ntree, *node);
}
}
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
}
}
bool should_update_individual_node(const bNodeTree &ntree, const bNode &node)
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
{
if (ntree.runtime->changed_flag & NTREE_CHANGED_ANY) {
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
return true;
}
if (node.runtime->changed_flag & NTREE_CHANGED_NODE_PROPERTY) {
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
return true;
}
if (ntree.runtime->changed_flag & NTREE_CHANGED_LINK) {
Nodes: Use dynamic declarations for group nodes Since a year and a half ago we've been switching to a new way to represent what sockets a node should have called "declarations" that's easier to use, clearer, and more flexible for upcoming features like dynamic socket counts or generic type sockets. All builtin nodes with a static set of sockets have switched, but one missing area has been group nodes and group input/output nodes. These nodes have **dynamic** declarations which change based on their properties or the group they're inside of. This patch addresses that, in preparation for using the same dynamic declaration feature for simulation nodes. Generally there shouldn't be user-visible differences, but one benefit is that user-created socket descriptions are now visible directly in the node editor for group nodes and group input/output nodes. The commit contains a few changes: - Add a node type callback for building dynamic declarations with different arguments - Add an `Extend` socket declaration for the "virtual" sockets used for connecting new links - A similar `Custom` socket declaration is used for addon-defined socket - Simplify the node update loop to use the declaration to build update sockets - Replace the "group update" functions with the declaration building - Move the node group input/output link creation to link drag operator - Make the field status part of group node declarations (not for group input/output nodes though) - Some fixes for declarations to make them update and build properly Differential Revision: https://developer.blender.org/D16850
2023-01-16 15:47:10 -06:00
/* Currently we have no way to tell if a node needs to be updated when a link changed. */
return true;
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
}
if (ntree.runtime->changed_flag & NTREE_CHANGED_INTERFACE) {
if (ELEM(node.type, NODE_GROUP_INPUT, NODE_GROUP_OUTPUT)) {
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
return true;
}
}
return false;
}
void update_internal_links(bNodeTree &ntree)
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
{
bke::node_tree_runtime::AllowUsingOutdatedInfo allow_outdated_info{ntree};
ntree.ensure_topology_cache();
for (bNode *node : ntree.all_nodes()) {
if (!this->should_update_individual_node(ntree, *node)) {
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
continue;
}
/* Find all expected internal links. */
Vector<std::pair<bNodeSocket *, bNodeSocket *>> expected_internal_links;
for (const bNodeSocket *output_socket : node->output_sockets()) {
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
if (!output_socket->is_available()) {
continue;
}
if (!output_socket->is_directly_linked()) {
continue;
}
if (output_socket->flag & SOCK_NO_INTERNAL_LINK) {
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
continue;
}
const bNodeSocket *input_socket = this->find_internally_linked_input(output_socket);
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
if (input_socket != nullptr) {
expected_internal_links.append(
{const_cast<bNodeSocket *>(input_socket), const_cast<bNodeSocket *>(output_socket)});
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
}
}
/* Rebuilt internal links if they have changed. */
if (node->runtime->internal_links.size() != expected_internal_links.size()) {
this->update_internal_links_in_node(ntree, *node, expected_internal_links);
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
}
else {
for (auto &item : expected_internal_links) {
const bNodeSocket *from_socket = item.first;
const bNodeSocket *to_socket = item.second;
bool found = false;
for (const bNodeLink &internal_link : node->runtime->internal_links) {
if (from_socket == internal_link.fromsock && to_socket == internal_link.tosock) {
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
found = true;
}
}
if (!found) {
this->update_internal_links_in_node(ntree, *node, expected_internal_links);
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
break;
}
}
}
}
}
const bNodeSocket *find_internally_linked_input(const bNodeSocket *output_socket)
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
{
const bNodeSocket *selected_socket = nullptr;
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
int selected_priority = -1;
bool selected_is_linked = false;
for (const bNodeSocket *input_socket : output_socket->owner_node().input_sockets()) {
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
if (!input_socket->is_available()) {
continue;
}
if (input_socket->flag & SOCK_NO_INTERNAL_LINK) {
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
continue;
}
const int priority = get_internal_link_type_priority(input_socket->typeinfo,
output_socket->typeinfo);
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
if (priority < 0) {
continue;
}
const bool is_linked = input_socket->is_directly_linked();
const bool is_preferred = priority > selected_priority || (is_linked && !selected_is_linked);
if (!is_preferred) {
continue;
}
selected_socket = input_socket;
selected_priority = priority;
selected_is_linked = is_linked;
}
return selected_socket;
}
void update_internal_links_in_node(bNodeTree &ntree,
bNode &node,
Span<std::pair<bNodeSocket *, bNodeSocket *>> links)
{
node.runtime->internal_links.clear();
node.runtime->internal_links.reserve(links.size());
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
for (const auto &item : links) {
bNodeSocket *from_socket = item.first;
bNodeSocket *to_socket = item.second;
bNodeLink link{};
link.fromnode = &node;
link.fromsock = from_socket;
link.tonode = &node;
link.tosock = to_socket;
link.flag |= NODE_LINK_VALID;
node.runtime->internal_links.append(link);
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
}
BKE_ntree_update_tag_node_internal_link(&ntree, &node);
}
void update_generic_callback(bNodeTree &ntree)
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
{
if (ntree.typeinfo->update == nullptr) {
return;
}
ntree.typeinfo->update(&ntree);
}
void remove_unused_previews_when_necessary(bNodeTree &ntree)
{
/* Don't trigger preview removal when only those flags are set. */
const uint32_t allowed_flags = NTREE_CHANGED_LINK | NTREE_CHANGED_SOCKET_PROPERTY |
NTREE_CHANGED_NODE_PROPERTY | NTREE_CHANGED_NODE_OUTPUT |
NTREE_CHANGED_INTERFACE;
if ((ntree.runtime->changed_flag & allowed_flags) == ntree.runtime->changed_flag) {
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
return;
}
BKE_node_preview_remove_unused(&ntree);
}
void propagate_runtime_flags(const bNodeTree &ntree)
{
ntree.ensure_topology_cache();
ntree.runtime->runtime_flag = 0;
if (ntree.type != NTREE_SHADER) {
return;
}
/* Check if a used node group has an animated image. */
for (const bNode *group_node : ntree.nodes_by_type("ShaderNodeGroup")) {
const bNodeTree *group = reinterpret_cast<bNodeTree *>(group_node->id);
if (group != nullptr) {
ntree.runtime->runtime_flag |= group->runtime->runtime_flag;
}
}
/* Check if the tree itself has an animated image. */
for (const StringRefNull idname : {"ShaderNodeTexImage", "ShaderNodeTexEnvironment"}) {
for (const bNode *node : ntree.nodes_by_type(idname)) {
Image *image = reinterpret_cast<Image *>(node->id);
if (image != nullptr && BKE_image_is_animated(image)) {
ntree.runtime->runtime_flag |= NTREE_RUNTIME_FLAG_HAS_IMAGE_ANIMATION;
break;
}
}
}
/* Check if the tree has a material output. */
for (const StringRefNull idname : {"ShaderNodeOutputMaterial",
"ShaderNodeOutputLight",
"ShaderNodeOutputWorld",
"ShaderNodeOutputAOV"}) {
const Span<const bNode *> nodes = ntree.nodes_by_type(idname);
if (!nodes.is_empty()) {
ntree.runtime->runtime_flag |= NTREE_RUNTIME_FLAG_HAS_MATERIAL_OUTPUT;
break;
}
}
}
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
void update_link_validation(bNodeTree &ntree)
{
const Span<const bNode *> toposort = ntree.toposort_left_to_right();
/* Build an array of toposort indices to allow retrieving the "depth" for each node. */
Array<int> toposort_indices(toposort.size());
for (const int i : toposort.index_range()) {
const bNode &node = *toposort[i];
toposort_indices[node.index()] = i;
}
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
LISTBASE_FOREACH (bNodeLink *, link, &ntree.links) {
link->flag |= NODE_LINK_VALID;
const bNode &from_node = *link->fromnode;
const bNode &to_node = *link->tonode;
if (toposort_indices[from_node.index()] > toposort_indices[to_node.index()]) {
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
link->flag &= ~NODE_LINK_VALID;
continue;
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
}
if (ntree.typeinfo->validate_link) {
const eNodeSocketDatatype from_type = eNodeSocketDatatype(link->fromsock->type);
const eNodeSocketDatatype to_type = eNodeSocketDatatype(link->tosock->type);
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
if (!ntree.typeinfo->validate_link(from_type, to_type)) {
link->flag &= ~NODE_LINK_VALID;
continue;
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
}
}
}
}
bool check_if_output_changed(const bNodeTree &tree)
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
{
tree.ensure_topology_cache();
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
/* Compute a hash that represents the node topology connected to the output. This always has to
* be updated even if it is not used to detect changes right now. Otherwise
* #btree.runtime.output_topology_hash will go out of date. */
const Vector<const bNodeSocket *> tree_output_sockets = this->find_output_sockets(tree);
const uint32_t old_topology_hash = tree.runtime->output_topology_hash;
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
const uint32_t new_topology_hash = this->get_combined_socket_topology_hash(
tree, tree_output_sockets);
tree.runtime->output_topology_hash = new_topology_hash;
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
if (const AnimData *adt = BKE_animdata_from_id(&tree.id)) {
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
/* Drivers may copy values in the node tree around arbitrarily and may cause the output to
* change even if it wouldn't without drivers. Only some special drivers like `frame/5` can
* be used without causing updates all the time currently. In the future we could try to
* handle other drivers better as well.
* Note that this optimization only works in practice when the depsgraph didn't also get a
* copy-on-write tag for the node tree (which happens when changing node properties). It does
* work in a few situations like adding reroutes and duplicating nodes though. */
LISTBASE_FOREACH (const FCurve *, fcurve, &adt->drivers) {
const ChannelDriver *driver = fcurve->driver;
const StringRef expression = driver->expression;
if (expression.startswith("frame")) {
const StringRef remaining_expression = expression.drop_known_prefix("frame");
if (remaining_expression.find_first_not_of(" */+-0123456789.") == StringRef::not_found) {
continue;
}
}
/* Unrecognized driver, assume that the output always changes. */
return true;
}
}
if (tree.runtime->changed_flag & NTREE_CHANGED_ANY) {
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
return true;
}
if (old_topology_hash != new_topology_hash) {
return true;
}
/* The topology hash can only be used when only topology-changing operations have been done. */
if (tree.runtime->changed_flag ==
(tree.runtime->changed_flag & (NTREE_CHANGED_LINK | NTREE_CHANGED_REMOVED_NODE))) {
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
if (old_topology_hash == new_topology_hash) {
return false;
}
}
if (!this->check_if_socket_outputs_changed_based_on_flags(tree, tree_output_sockets)) {
return false;
}
return true;
}
Vector<const bNodeSocket *> find_output_sockets(const bNodeTree &tree)
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
{
Vector<const bNodeSocket *> sockets;
for (const bNode *node : tree.all_nodes()) {
if (!this->is_output_node(*node)) {
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
continue;
}
for (const bNodeSocket *socket : node->input_sockets()) {
if (!STREQ(socket->idname, "NodeSocketVirtual")) {
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
sockets.append(socket);
}
}
}
return sockets;
}
bool is_output_node(const bNode &node) const
{
if (node.typeinfo->nclass == NODE_CLASS_OUTPUT) {
return true;
}
if (node.type == NODE_GROUP_OUTPUT) {
return true;
}
/* Assume node groups without output sockets are outputs. */
if (node.type == NODE_GROUP) {
const bNodeTree *node_group = reinterpret_cast<const bNodeTree *>(node.id);
if (node_group != nullptr &&
node_group->runtime->runtime_flag & NTREE_RUNTIME_FLAG_HAS_MATERIAL_OUTPUT) {
return true;
}
}
return false;
}
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
/**
* Computes a hash that changes when the node tree topology connected to an output node changes.
* Adding reroutes does not have an effect on the hash.
*/
uint32_t get_combined_socket_topology_hash(const bNodeTree &tree,
Span<const bNodeSocket *> sockets)
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
{
if (tree.has_available_link_cycle()) {
/* Return dummy value when the link has any cycles. The algorithm below could be improved to
* handle cycles more gracefully. */
return 0;
}
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
Array<uint32_t> hashes = this->get_socket_topology_hashes(tree, sockets);
uint32_t combined_hash = 0;
for (uint32_t hash : hashes) {
combined_hash = noise::hash(combined_hash, hash);
}
return combined_hash;
}
Array<uint32_t> get_socket_topology_hashes(const bNodeTree &tree,
const Span<const bNodeSocket *> sockets)
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
{
BLI_assert(!tree.has_available_link_cycle());
Array<std::optional<uint32_t>> hash_by_socket_id(tree.all_sockets().size());
Stack<const bNodeSocket *> sockets_to_check = sockets;
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
auto get_socket_ptr_hash = [&](const bNodeSocket &socket) {
const uint64_t socket_ptr = uintptr_t(&socket);
return noise::hash(socket_ptr, socket_ptr >> 32);
};
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
while (!sockets_to_check.is_empty()) {
const bNodeSocket &socket = *sockets_to_check.peek();
const bNode &node = socket.owner_node();
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
if (hash_by_socket_id[socket.index_in_tree()].has_value()) {
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
sockets_to_check.pop();
/* Socket is handled already. */
continue;
}
uint32_t socket_hash = 0;
if (socket.is_input()) {
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
/* For input sockets, first compute the hashes of all linked sockets. */
bool all_origins_computed = true;
bool get_value_from_origin = false;
for (const bNodeLink *link : socket.directly_linked_links()) {
if (link->is_muted()) {
continue;
}
if (!link->is_available()) {
continue;
}
const bNodeSocket &origin_socket = *link->fromsock;
const std::optional<uint32_t> origin_hash =
hash_by_socket_id[origin_socket.index_in_tree()];
if (origin_hash.has_value()) {
if (get_value_from_origin || socket.type != origin_socket.type) {
socket_hash = noise::hash(socket_hash, *origin_hash);
}
else {
/* Copy the socket hash because the link did not change it. */
socket_hash = *origin_hash;
}
get_value_from_origin = true;
}
else {
sockets_to_check.push(&origin_socket);
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
all_origins_computed = false;
}
}
if (!all_origins_computed) {
continue;
}
if (!get_value_from_origin) {
socket_hash = get_socket_ptr_hash(socket);
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
}
}
else {
bool all_available_inputs_computed = true;
for (const bNodeSocket *input_socket : node.input_sockets()) {
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
if (input_socket->is_available()) {
if (!hash_by_socket_id[input_socket->index_in_tree()].has_value()) {
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
sockets_to_check.push(input_socket);
all_available_inputs_computed = false;
}
}
}
if (!all_available_inputs_computed) {
continue;
}
if (node.type == NODE_REROUTE) {
socket_hash = *hash_by_socket_id[node.input_socket(0).index_in_tree()];
}
else if (node.is_muted()) {
const bNodeSocket *internal_input = socket.internal_link_input();
if (internal_input == nullptr) {
socket_hash = get_socket_ptr_hash(socket);
}
else {
if (internal_input->type == socket.type) {
socket_hash = *hash_by_socket_id[internal_input->index_in_tree()];
}
else {
socket_hash = get_socket_ptr_hash(socket);
}
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
}
}
else {
socket_hash = get_socket_ptr_hash(socket);
for (const bNodeSocket *input_socket : node.input_sockets()) {
if (input_socket->is_available()) {
const uint32_t input_socket_hash = *hash_by_socket_id[input_socket->index_in_tree()];
socket_hash = noise::hash(socket_hash, input_socket_hash);
}
}
/* The Image Texture node has a special case. The behavior of the color output changes
* depending on whether the Alpha output is linked. */
if (node.type == SH_NODE_TEX_IMAGE && socket.index() == 0) {
BLI_assert(STREQ(socket.name, "Color"));
const bNodeSocket &alpha_socket = node.output_socket(1);
BLI_assert(STREQ(alpha_socket.name, "Alpha"));
if (alpha_socket.is_directly_linked()) {
socket_hash = noise::hash(socket_hash);
}
}
}
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
}
hash_by_socket_id[socket.index_in_tree()] = socket_hash;
/* Check that nothing has been pushed in the meantime. */
BLI_assert(sockets_to_check.peek() == &socket);
sockets_to_check.pop();
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
}
/* Create output array. */
Array<uint32_t> hashes(sockets.size());
for (const int i : sockets.index_range()) {
hashes[i] = *hash_by_socket_id[sockets[i]->index_in_tree()];
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
}
return hashes;
}
/**
* Returns true when any of the provided sockets changed its values. A change is detected by
* checking the #changed_flag on connected sockets and nodes.
*/
bool check_if_socket_outputs_changed_based_on_flags(const bNodeTree &tree,
Span<const bNodeSocket *> sockets)
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
{
/* Avoid visiting the same socket twice when multiple links point to the same socket. */
Array<bool> pushed_by_socket_id(tree.all_sockets().size(), false);
Stack<const bNodeSocket *> sockets_to_check = sockets;
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
for (const bNodeSocket *socket : sockets) {
pushed_by_socket_id[socket->index_in_tree()] = true;
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
}
while (!sockets_to_check.is_empty()) {
const bNodeSocket &socket = *sockets_to_check.pop();
const bNode &node = socket.owner_node();
if (socket.runtime->changed_flag != NTREE_CHANGED_NOTHING) {
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
return true;
}
if (node.runtime->changed_flag != NTREE_CHANGED_NOTHING) {
const bool only_unused_internal_link_changed = !node.is_muted() &&
node.runtime->changed_flag ==
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
NTREE_CHANGED_INTERNAL_LINK;
if (!only_unused_internal_link_changed) {
return true;
}
}
if (socket.is_input()) {
for (const bNodeSocket *origin_socket : socket.directly_linked_sockets()) {
bool &pushed = pushed_by_socket_id[origin_socket->index_in_tree()];
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
if (!pushed) {
sockets_to_check.push(origin_socket);
pushed = true;
}
}
}
else {
for (const bNodeSocket *input_socket : node.input_sockets()) {
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
if (input_socket->is_available()) {
bool &pushed = pushed_by_socket_id[input_socket->index_in_tree()];
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
if (!pushed) {
sockets_to_check.push(input_socket);
pushed = true;
}
}
}
/* The Normal node has a special case, because the value stored in the first output socket
* is used as input in the node. */
if (node.type == SH_NODE_NORMAL && socket.index() == 1) {
BLI_assert(STREQ(socket.name, "Dot"));
const bNodeSocket &normal_output = node.output_socket(0);
BLI_assert(STREQ(normal_output.name, "Normal"));
bool &pushed = pushed_by_socket_id[normal_output.index_in_tree()];
if (!pushed) {
sockets_to_check.push(&normal_output);
pushed = true;
}
}
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
}
}
return false;
}
void reset_changed_flags(bNodeTree &ntree)
{
ntree.runtime->changed_flag = NTREE_CHANGED_NOTHING;
for (bNode *node : ntree.all_nodes()) {
node->runtime->changed_flag = NTREE_CHANGED_NOTHING;
node->runtime->update = 0;
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
LISTBASE_FOREACH (bNodeSocket *, socket, &node->inputs) {
socket->runtime->changed_flag = NTREE_CHANGED_NOTHING;
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
}
LISTBASE_FOREACH (bNodeSocket *, socket, &node->outputs) {
socket->runtime->changed_flag = NTREE_CHANGED_NOTHING;
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
}
}
}
};
} // namespace blender::bke
void BKE_ntree_update_tag_all(bNodeTree *ntree)
{
add_tree_tag(ntree, NTREE_CHANGED_ANY);
}
void BKE_ntree_update_tag_node_property(bNodeTree *ntree, bNode *node)
{
add_node_tag(ntree, node, NTREE_CHANGED_NODE_PROPERTY);
}
void BKE_ntree_update_tag_node_new(bNodeTree *ntree, bNode *node)
{
add_node_tag(ntree, node, NTREE_CHANGED_NODE_PROPERTY);
}
void BKE_ntree_update_tag_socket_property(bNodeTree *ntree, bNodeSocket *socket)
{
add_socket_tag(ntree, socket, NTREE_CHANGED_SOCKET_PROPERTY);
}
void BKE_ntree_update_tag_socket_new(bNodeTree *ntree, bNodeSocket *socket)
{
add_socket_tag(ntree, socket, NTREE_CHANGED_SOCKET_PROPERTY);
}
void BKE_ntree_update_tag_socket_removed(bNodeTree *ntree)
{
add_tree_tag(ntree, NTREE_CHANGED_REMOVED_SOCKET);
}
void BKE_ntree_update_tag_socket_type(bNodeTree *ntree, bNodeSocket *socket)
{
add_socket_tag(ntree, socket, NTREE_CHANGED_SOCKET_PROPERTY);
}
void BKE_ntree_update_tag_socket_availability(bNodeTree *ntree, bNodeSocket *socket)
{
add_socket_tag(ntree, socket, NTREE_CHANGED_SOCKET_PROPERTY);
}
void BKE_ntree_update_tag_node_removed(bNodeTree *ntree)
{
add_tree_tag(ntree, NTREE_CHANGED_REMOVED_NODE);
}
void BKE_ntree_update_tag_node_reordered(bNodeTree *ntree)
{
/* Don't add a tree update tag to avoid reevaluations for trivial operations like selection or
* parenting that typically influence the node order. This means the node order can be different
* for original and evaluated trees. A different solution might avoid sorting nodes based on UI
* states like selection, which would require not tying the node order to the drawing order. */
ntree->runtime->topology_cache_mutex.tag_dirty();
}
void BKE_ntree_update_tag_node_mute(bNodeTree *ntree, bNode *node)
{
add_node_tag(ntree, node, NTREE_CHANGED_NODE_PROPERTY);
}
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
void BKE_ntree_update_tag_node_internal_link(bNodeTree *ntree, bNode *node)
{
add_node_tag(ntree, node, NTREE_CHANGED_INTERNAL_LINK);
}
void BKE_ntree_update_tag_link_changed(bNodeTree *ntree)
{
add_tree_tag(ntree, NTREE_CHANGED_LINK);
}
void BKE_ntree_update_tag_link_removed(bNodeTree *ntree)
{
add_tree_tag(ntree, NTREE_CHANGED_LINK);
}
void BKE_ntree_update_tag_link_added(bNodeTree *ntree, bNodeLink * /*link*/)
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
{
add_tree_tag(ntree, NTREE_CHANGED_LINK);
}
void BKE_ntree_update_tag_link_mute(bNodeTree *ntree, bNodeLink * /*link*/)
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
{
add_tree_tag(ntree, NTREE_CHANGED_LINK);
}
void BKE_ntree_update_tag_active_output_changed(bNodeTree *ntree)
{
add_tree_tag(ntree, NTREE_CHANGED_ANY);
}
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
void BKE_ntree_update_tag_missing_runtime_data(bNodeTree *ntree)
{
add_tree_tag(ntree, NTREE_CHANGED_ALL);
}
void BKE_ntree_update_tag_interface(bNodeTree *ntree)
{
add_tree_tag(ntree, NTREE_CHANGED_INTERFACE);
}
void BKE_ntree_update_tag_parent_change(bNodeTree *ntree, bNode *node)
{
add_node_tag(ntree, node, NTREE_CHANGED_PARENT);
}
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
void BKE_ntree_update_tag_id_changed(Main *bmain, ID *id)
{
FOREACH_NODETREE_BEGIN (bmain, ntree, ntree_id) {
for (bNode *node : ntree->all_nodes()) {
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
if (node->id == id) {
node->runtime->update |= NODE_UPDATE_ID;
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
add_node_tag(ntree, node, NTREE_CHANGED_NODE_PROPERTY);
}
}
}
FOREACH_NODETREE_END;
}
void BKE_ntree_update_tag_image_user_changed(bNodeTree *ntree, ImageUser * /*iuser*/)
{
/* Would have to search for the node that uses the image user for a more detailed tag. */
add_tree_tag(ntree, NTREE_CHANGED_ANY);
}
Nodes: refactor node tree update handling Goals of this refactor: * More unified approach to updating everything that needs to be updated after a change in a node tree. * The updates should happen in the correct order and quadratic or worse algorithms should be avoided. * Improve detection of changes to the output to avoid tagging the depsgraph when it's not necessary. * Move towards a more declarative style of defining nodes by having a more centralized update procedure. The refactor consists of two main parts: * Node tree tagging and update refactor. * Generally, when changes are done to a node tree, it is tagged dirty until a global update function is called that updates everything in the correct order. * The tagging is more fine-grained compared to before, to allow for more precise depsgraph update tagging. * Depsgraph changes. * The shading specific depsgraph node for node trees as been removed. * Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only tagged when the output of the node tree changed (e.g. the Group Output or Material Output node). * The copy-on-write relation from node trees to the data block they are embedded in is now non-flushing. This avoids e.g. triggering a material update after the shader node tree changed in unrelated ways. Instead the material has a flushing relation to the new `NTREE_OUTPUT` node now. * The depsgraph no longer reports data block changes through to cycles through `Depsgraph.updates` when only the node tree changed in ways that do not affect the output. Avoiding unnecessary updates seems to work well for geometry nodes and cycles. The situation is a bit worse when there are drivers on the node tree, but that could potentially be improved separately in the future. Avoiding updates in eevee and the compositor is more tricky, but also less urgent. * Eevee updates are triggered by calling `DRW_notify_view_update` in `ED_render_view3d_update` indirectly from `DEG_editors_update`. * Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`. This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`. Removing updates always has the risk of breaking some dependency that no one was aware of. It's not unlikely that this will happen here as well. Adding back missing updates should be quite a bit easier than getting rid of unnecessary updates though. Differential Revision: https://developer.blender.org/D13246
2021-12-21 15:18:56 +01:00
/**
* Protect from recursive calls into the updating function. Some node update functions might
* trigger this from Python or in other cases.
*
* This could be added to #Main, but given that there is generally only one #Main, that's not
* really worth it now.
*/
static bool is_updating = false;
void BKE_ntree_update_main(Main *bmain, NodeTreeUpdateExtraParams *params)
{
if (is_updating) {
return;
}
is_updating = true;
blender::bke::NodeTreeMainUpdater updater{bmain, params};
updater.update();
is_updating = false;
}
void BKE_ntree_update_main_tree(Main *bmain, bNodeTree *ntree, NodeTreeUpdateExtraParams *params)
{
if (ntree == nullptr) {
BKE_ntree_update_main(bmain, params);
return;
}
if (is_updating) {
return;
}
is_updating = true;
blender::bke::NodeTreeMainUpdater updater{bmain, params};
updater.update_rooted({ntree});
is_updating = false;
}