We started to run out of bits there, so now we separate flags
which came from __object_flags and which are either runtime or
coming from __shader_flags.
Rule now is: SD_OBJECT_* flags are to be tested against new
object_flags field of ShaderData, all the rest flags are to
be tested against flags field of ShaderData.
There should be no user-visible changes, and time difference
should be minimal. In fact, from tests here can only see hardly
measurable difference and sometimes the new code is somewhat
faster (all within a noise floor, so hard to tell for sure).
Reviewers: brecht, dingto, juicyfruit, lukasstockner97, maiself
Differential Revision: https://developer.blender.org/D2428
Was a bit confusing to have transparent and translucent depth
exposed but no diffuse or glossy.
Reviewers: brecht
Subscribers: eyecandy
Differential Revision: https://developer.blender.org/D2399
Basically, the problem here was that the transform that's used to bring texture coordinates
to world space is either fetched while setting up the shader (with Object Motion is enabled) or
fetched when needed (otherwise). That helps to save ShaderData memory on OpenCL when Object Motion isn't needed.
Now, if OM is enabled, the Lamp transform can just be stored inside the ShaderData as well. The original commit just assumed it is.
However, when it's not (on OpenCL by default, for example), there is no easy way to fetch it when needed, since the ShaderData doesn't
store the Lamp index.
So, for now the lamps just don't support local texture coordinates anymore when Object Motion is disabled.
To fix and support this properly, one of the following could be done:
- Just always pre-fetch the transform. Downside: Memory Usage increases when not using OM on OpenCL
- Add a variable to ShaderData that stores the Lamp ID to allow fetching it when needed
- Store the Lamp ID inside prim or object. Problem: Cycles currently checks these for whether an object was hit - these checks would need to be changed.
- Enable OM whenever a Texture Coordinate's Normal output is used. Downside: Might not actually be needed.
This option allows to create a smoother transition between Bricks and Mortar - 0 applies no smoothing, and 1 smooths across the whole mortar width.
Mainly useful for displacement textures.
The new default value for the smoothing option is 0.1 to give some smoothing that helps with antialiasing, but existing nodes are loaded with smoothing 0 to preserve compatibility.
Reviewers: sergey, dingto, juicyfruit, brecht
Reviewed By: brecht
Subscribers: Blendify, nutel
Differential Revision: https://developer.blender.org/D2230
When using the Normal output of the Texture Coordinate node on Point and Spot lamps, the coordinates now depend on the rotation of the lamp.
On Area lamps, the Parametric output of the Geometry node now returns UV coordinates on the area lamp.
Credit for the Area lamp part goes to Stefan Werner (from D1995).
Note that volume rendering is not supported yet, this is a step towards that.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2299
This is also an important mathematical operation that can be folded
if it is known that one argument is a certain constant. For colors
the operation is provided as a Gamma node.
The SVM Gamma node needs a small fix to make it follow the 0 ^ 0 == 1
rule, same as the Power node, or the Gamma node itself in OSL mode.
Reviewers: #cycles
Differential Revision: https://developer.blender.org/D2263
Using ones complement for detecting if transform has been applied was confusing
and led to several bugs. With this proper checks are made.
Also added a few transforms where they were missing, mostly affecting baking
and displacement when `P` is used in the shader (previously `P` was in the
wrong space for these shaders)
Also removed `TIME_INVALID` as this may have resulted in incorrect
transforms in some cases.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2192
Bump mapping was happening in world space while displacement happens in object
space, causing shading errors when displacement type was used with bump mapping.
To fix this the proper transforms are added to bump nodes. This is only done
for automatic bump mapping however, to avoid visual changes from other uses of
bump mapping. It would be nice to do this for all bump mapping to be consistent
but that will have to wait till we can break compatibility.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2191
The two SVM nodes added with e7ea1ae78c caused a slowdown on AMD cards when rendering with OpenCL, whether displacement was used or not.
In the Barcelona Pavillon scene on a RX480, this would cause a 12% slowdown.
Therefore, this commit adds a additional flag for feature-adaptive compilation so that the new SVM nodes are only enabled when they are needed (Node tree connected to the Displacement output and Displacement type set to Both).
Also, the nodes were also added to shaders when the Displacement Type was set to Bump (the default), which was unneccessary and is fixed now.
Thanks to linda2 on IRC for reporting and testing and to maiself for help with the displacement shader code.
This fix might be relevant for 2.78, but it should be tested further before including it.
Object coordinates can now be used in the displacement shader and will give
correct results, where as before bump mapping was calculated from the displace
positions and resulted in incorrect shading.
This works by evaluating the shader in two parts, first bump then surface, and
setting the shader state to match what it would be if the surface was
undisplaced for the bump shader evaluation. Currently only `P` is set as if
undisplaced, but other shader variables could be set as well, such as `I` or
`time`. Since these aren't set to anything meaningful for displacement I left
them out of this patch, we can decide what to do with them separately.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2156
There basically are two issues here: in smooth mode (and all non-tangent
normal map types) it doesn't invert the normal for backfacing polys;
on the other hand for flat shaded tangent type it is inverted too soon.
This fix does a brute force correction by checking the backfacing flag.
Reviewers: #cycles, brecht
Reviewed By: #cycles, brecht
Differential Revision: https://developer.blender.org/D2181
Changes from microdisplacement work broke previous support for subdivision
meshes, sometimes leading to crashes; this makes things work again. Files
that contain "patch" nodes will need to be updated to use meshes instead, as
specifying patches was both inefficient and completely unsupported by the new
subdivision code.
This way OpenCL devices can also benefit from a smaller memory footprint, when using e.g. bumpmaps (greyscale, 1 channel).
Additional target for my GSoC 2016.
Now we have the 4 component ones first (float4, byte4, half4) followed by the 1 component ones (float, byte, half).
Makes code a bit more consistent and also reduces code a bit when enabling half support on GPU in next commit.
This also exposed a typo in half CPU images for 3D textures, which wasn't used yet, but good to have that one fixed anyway.
Adds a descriptor for attributes that can easily be passed around and extended
to contain more data. Will be used for attributes on subdivision meshes.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2110
All the changes are mainly giving explicit tips on inlining functions,
so they match how inlining worked with previous toolkit.
This make kernel compiled by CUDA 8 render in average with same speed
as previous kernels. Some scenes are somewhat faster, some of them are
somewhat slower. But slowdown is within 1% so far.
On a positive side it allows us to enable newer generation cards on
buildbots (so GTX 10x0 will be officially supported soon).
These are complex nodes, and it's conceivable they may end up constant
in some circumstances within node groups, so folding support is useful.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2084
This adds support for ngons and attributes on subdivision meshes. Ngons are
needed for proper attribute interpolation as well as correct Catmull-Clark
subdivision. Several changes are made to achieve this:
- new primitive `SubdFace` added to `Mesh`
- 3 more textures are used to store info on patches from subd meshes
- Blender export uses loop interface instead of tessface for subd meshes
- `Attribute` class is updated with a simplified way to pass primitive counts
around and to support ngons.
- extra points for ngons are generated for O(1) attribute interpolation
- curves are temporally disabled on subd meshes to avoid various bugs with
implementation
- old unneeded code is removed from `subd/`
- various fixes and improvements
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2108
- In fresnel_dielectric, the differentials calculation sometimes divided by zero.
- When the normal map was (0.5, 0.5, 0.5), the code would try to normalize a zero vector. Now, it just uses the regular normal as a fallback.
- The approximate error function used in Beckmann sampling sometimes overflowed to inf while calculating r^16. The final value is 1 - 1/r^16, however,
so now it just returns 1 if the computation would overflow otherwise.
This commit adds a new distribution to the Glossy, Anisotropic and Glass BSDFs that implements the
multiple-scattering microfacet model described in the paper "Multiple-Scattering Microfacet BSDFs with the Smith Model".
Essentially, the improvement is that unlike classical GGX, which only models single scattering and assumes
the contribution of multiple bounces to be zero, this new model performs a random walk on the microsurface until
the ray leaves it again, which ensures perfect energy conservation.
In practise, this means that the "darkening problem" - GGX materials becoming darker with increasing
roughness - is solved in a physically correct and efficient way.
The downside of this model is that it has no (known) analytic expression for evalation. However, it can be
evaluated stochastically, and although the correct PDF isn't known either, the properties of MIS and the
balance heuristic guarantee an unbiased result at the cost of slightly higher noise.
Reviewers: dingto, #cycles, brecht
Reviewed By: dingto, #cycles, brecht
Subscribers: bliblubli, ace_dragon, gregzaal, brecht, harvester, dingto, marcog, swerner, jtheninja, Blendify, nutel
Differential Revision: https://developer.blender.org/D2002
Some closures were missing from calculation, leading to an array
under-allocation, presumable causing memory corruption issues with
emission shaders on OpenCL and was causing issues with Volume 3D
textures with CUDA.
The issue was identified by Thomas Dinges, the patch is different
from the original D2006. See the brief discussion there. Current
approach is similar (or the same) as Brecht suggested.
This adds support for CUDA Texture objects (also known as Bindless textures) for Kepler GPUs (Geforce 6xx and above).
This is used for all 2D/3D textures, data still uses arrays as before.
User benefits:
* No more limits of image textures on Kepler.
We had 5 float4 and 145 byte4 slots there before, now we have 1024 float4 and 1024 byte4.
This can be extended further if we need to (just change the define).
* Single channel textures slots (byte and float) are now supported on Kepler as well (1024 slots for each type).
ToDo / Issues:
* 3D textures don't work yet, at least don't show up during render. I have no idea whats wrong yet.
* Dynamically allocate bindless_mapping array?
I hope Fermi still works fine, but that should be tested on a Fermi card before pushing to master.
Part of my GSoC 2016.
Reviewers: sergey, #cycles, brecht
Subscribers: swerner, jtheninja, brecht, sergey
Differential Revision: https://developer.blender.org/D1999
Title says it all, this adds OpenCL float4 texture support.
There is a bug in the code still, I get a "Out of ressources error" on nvidia hardware here, not sure whats wrong yet.
Will investigate further, but maybe someone else has an idea. :)
Reviewers: #cycles, brecht
Subscribers: brecht, candreacchio
Differential Revision: https://developer.blender.org/D1983
