The design for how we approach the "Everything Nodes" project
has changed. We will focus on a different part of the project initially.
While future me will likely refer back to some of the code I remove here,
there is no point in keeping this code around in master currently.
It would just confuse other developers working on the project.
This does not remove the simulation modifier and data block. Those are
just cleaned up, so that the boilerplate code can be reused in the future.
This changes how the simplify volumes setting works. Before, it only
affeted viewport rendering. This was an issue, because all internal
computations would still have to happen on the high resolution volumes.
With this patch, the simplify setting already affects file loading and
procedural generation of volumes.
Rendering does not have to care about the simplify option anymore,
it just gets the correct simplified version from the depsgraph.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D9176
When creating the boundary edit data, the loop can stop because a new
vertex was found further from the boundary than the brush radius or
because all vertices of the mesh were already processed. In this second
case, the max_propagation_step was not set, so the code that laters
calculates the falloff was not working, preventing the mesh from
deforming.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9215
This adds a smooth deformation type to the boundary brush, which smooths
the boundary and has a regular falloff towards the inside of the mesh.
For smoothing, only vertices parallel to the boundary are taken into
account, creating this effect.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9204
Now that sculpt mask and face sets can also be drawn without using the
PBVH, these operators need these extra updates when the data changes.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8956
Previously the base displacement for solving the constraints was always
using 0.5, which may introduce artifacts when multiple constraints of
different types are computed for the same vertex. This introduces a
factor that reduces the base displacement of the solver, reducing the
artifacts.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9202
Menus with categories gain a dividing line and omit the title.
Differential Revision: https://developer.blender.org/D5135
Reviewed by Brecht Van Lommel
Corrects incorrect usages of the fragment 'apart of' when 'a part of' was required.
Differential Revision: https://developer.blender.org/D9245
Reviewed by Campbell Barton
Corrects incorrect usages of the word 'loose' when 'lose' was required.
Differential Revision: https://developer.blender.org/D9243
Reviewed by Campbell Barton
Corrects incorrect usage of contraction for 'it is', when possessive 'its' was required.
Differential Revision: https://developer.blender.org/D9250
Reviewed by Campbell Barton
Although the `ELEM` macro wraps logic into parentheses, it's not intended to be
used that way. Unexpanded macros should still follow regular coding style for
readability and for tools parsing the code (it confused clang-format for
example).
Issue introduced in rB4f616c93f7cb.
Issue here is that the the `StrokeCache` `mirror_symmetry_pass` is still
in its previous state when entering
`wpaint_do_symmetrical_brush_actions`.
For the initial stroke this means that the (wrong) cache
`mirror_symmetry_pass` ends up in SculptBrushTest `mirror_symmetry_pass`
as well and thus the clipping test in `sculpt_brush_test_clipping` will
fail.
[ This one flips the coords to test against clipping according to (now
wrong) `mirror_symmetry_pass` ]
Solution seems simple: just ensure we start of with a
`mirror_symmetry_pass` of zero in `wpaint_do_symmetrical_brush_actions`
for the initial stroke.
Same thing is done for vertex paint as well.
Maniphest Tasks: T81484
Differential Revision: https://developer.blender.org/D9268
This modifier is the opposite of the recently added Mesh to Volume modifier.
It converts the "surface" of a volume into a mesh. The "surface" is defined
by a threshold value. All voxels with a density higher than the threshold
are considered to be inside the volume, while all others will be outside.
By default, the resolution of the generated mesh depends on the voxel
size of the volume grid. The resolution can be customized. It should be
noted that a lower resolution might not make this modifier faster. This
is because we have to downsample the openvdb grid, which isn't a cheap
operation.
Converting a mesh to a volume and then back to a mesh is possible,
but it does require two separate mesh objects for now.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D9141
Related to T81199. When saving a rendered image with transparency (RGBA)
to a 3 channel PNG image the emissive colors were not exported. This
change adds the emissive colors to the written file.
NOTE: this does not fix the limitation of writing emissive colors to a 4
channel PNG file as the file format does not support this.
Issue caused by {9582797d4b50} in b2.90. The surface per material used
an index buffer owned by the batch. These index buffers are created at
the same time the surface tris index buffer was created. When a material
per batch buffer was invalidated it used the surface tris index buffer
rendering all materials on all surfaces making the last draw command
render succeed.
This patch stores the surface tris per material in the cache so they can
be reused. There is also no need to use the `saved_elem_ranges` anymore as they are
now part of the cache.
The ugly bit of the implementation is that in `extract_tris_finish` the
MeshBufferCache is retrieved. But as this part was already documented as
a hack and it is something that is only used for final meshes. Other
solutions would impact performance or made the fix not condensed
(passing parameters that shouldn't be used).
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D9136
Field time_base of video stream must be set for some containers,
otherwise avformat_write_header() will set it to default values.
Rendered file in such case won't be played at desired frame rate.
See init_muxer() in mux.c in ffpmeg sources.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9213
rB78a5895c96 introduced a "use after scope" warning, where a buffer
from a lower scope was used later. The solution is to only use one
variable and store whether to use it more explicitely with a bool.
The code for Bevel's percent (and absolute) modes were pretty bogus.
It assumed, like the rest of the modes, that the offset lines are
parallel to the beveled edge. Which is not true for these modes,
though it accidentally works sometimes if the legs are equilength.
Also the clamping code for those modes was completey wrong.
It is too hard to really fix the clamping code for absolute mode,
but it is a little better now. Percent mode clamping is fixed.
A general refactor / fix commit that should clear out the issues that have been reported on external forces and moving effectors (e.g. T79537, T81660, T80088).
Setting this type is required to prevent fluid particles from being treated like physics particles. The actual fix for this was made in rB11a8a6d0e6b5.
Scale widths of popovers and dialogs with Text Style font point changes.
Differential Revision: https://developer.blender.org/D9132
Reviewed by Hans Goudey
The "active_pose_bone" context variable isn't accessed from
`buttons_context`, it uses `screen_context` instead. This means
it can't account for pinning in the property editor.
Using "pose_bone" context variable first means the property
editor context will be used and the pinning will work.
Differential Revision: https://developer.blender.org/D9242
Code could call CustomData_get_layer_index_n with a negative index (if
no active and/or render UV layers are found). This would assert since
rBe86785c51445.
Spotted while looking into T81398.
Differential Revision: https://developer.blender.org/D9212
This was caused by canceling operator if strip has more than 0 inputs.
Logic should be reversed - cancel only if strip has 0 inputs.
BKE_sequencer_render_loop_check() arguments had to be sanitized because
seq_effect_find_selected() can set seq1,2,3 to NULL
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9197
- Expand the "Type" toggle at the top. This is consistent with other
modifiers where there is a "Type" option at the top. It conveys the
property's importance and makes it faster to switch it.
- Expand the "Delimit" option vertically so the text isn't squashed.
There isn't enough space on one line for this, and is has to be
expanded because more than one option can be selected. This is also
consistent with how "multi-select" enums are often displayed, like
the 3D view snapping settings.
| Before | After |
| {F9000996} | {F9000985} |
This patch implements panel expansion saving and resetting for property
search. While search is active, the panel expansion is based on whether
or not it has a search result. When the search finishes, the panel
expansion returns to its state before the search started. However, any
panels interacted with during the search won't reset their expansion.
This requires adding a new runtime flag for panels to store whether to
use search result status as expansion. It also requires better handling
for animation when panel expansion changes with another new runtime flag.
`UI_panel_is_closed` gets the search-dependent expansion, but it is
intentionally not used to access expansion in every case-- sometimes it's
necessary to use `PNL_CLOSED` directly.
Differential Revision: https://developer.blender.org/D8984
