Move all header file into namespace.
Unnecessary namespaces was removed from implementations file.
Part of forward declarations in header was moved in the top part
of file just to do not have a lot of separate namespaces.
Pull Request: https://projects.blender.org/blender/blender/pulls/121637
Now the Transform Geometry node either has individual components (location,
rotation and scale) or a matrix as input. In many cases that is just more
convenient when working with matrices. Often this is identical to splitting
the matrix into it's individual components. However, if the matrix contains
shearing, information is lost when splitting it into individual components.
Pull Request: https://projects.blender.org/blender/blender/pulls/121438
This adds a new `Transform` output socket of matrix type to the Object Info node.
This is clearly useful, but we did not do this before for a couple of reasons:
* It's redundant with the location, rotation and scale outputs.
* We might want separate `Object Transform` and `Object Geometry` nodes.
For now just adding the socket is probably useful enough to justify it. Even more
so because it's addition doesn't really block other designs in the future either.
Pull Request: https://projects.blender.org/blender/blender/pulls/121437
This allows setting a color tag for node groups which affects the header
color of group nodes. With this, node groups can look even more similar
to built-in nodes. The only remaining difference is the node group icon in
the node header.
Blender has quite a few different built-in color tags. Most of those are
exposed with very few exceptions. For example, the layout, interface
and pattern categories are not exposed because they are only for built-in
nodes or are not used anymore.
It's generally agreed upon that the set of different color tags is likely too
large. Some differences between color make more sense in some contexts
than in others. In the interest of consistency, it was decided to expose all
these categories anyway. If we ever decide to consolidate them, the worst
that can happen is that a group looses it's category, which wouldn't be too bad.
Pull Request: https://projects.blender.org/blender/blender/pulls/121385
As part of #121565.
To avoid using drawing indices outside of the internal grease pencil API,
this refactor adds the functions `GreasePencil::get_eval_drawing` to replace
the `get_eval_grease_pencil_layer_drawing*` functions.
Pull Request: https://projects.blender.org/blender/blender/pulls/121567
This allows node groups to have a description that is shown in the add menu
or when hovering over the node header.
This new description is stored in `bNodeTree.description`. Unfortunately, it
conflicts a bit with `ID.asset_data.description`. The difference is that the latter
only exists for assets. However, it makes sense for node groups to have
descriptions even if they are not assets (just like `static` functions in C++ should
also be able to have comments). In some cases, node groups are also generated
by addons for a specific purpose. Those should still have a description without
being reusable to make it easier to understand for users.
The solution here is to use the asset description if the node group is an asset,
and to use `bNodeTree.description` otherwise. The description is synced
automatically when marking or clearing assets.
A side benefit of this solution is that appended node group assets can keep their
description, which is currently always lost.
Pull Request: https://projects.blender.org/blender/blender/pulls/121334
This (experimental, for now) node retrieve's voxel values
at specific voxel indices for a grid input. It's similar to the
Sample Grid node (77cba3d551), but there is
no interpolation, and it uses indices instead of positions.
Pull Request: https://projects.blender.org/blender/blender/pulls/118690
This adds the same overlay that already exists for the bake node to the simulation output node.
Without this, it's quite hard to see if the simulation zone is baked or not currently.
Pull Request: https://projects.blender.org/blender/blender/pulls/121497
Previously, the Realize Instances node would always realize everything in the geometry.
Now it's possible to more selectively realize parts of the geometry:
* One can choose which top level instances should be realized.
* The realization depth can be controlled per top-level instance. For example, if there are
5 top level instances, each of which contains 10 other instances, it's now possible to
realize only one level so that one ends up with 50 instances.
Pull Request: https://projects.blender.org/blender/blender/pulls/116582
This changes the menu switch socket to use the socket-items system
(`NOD_socket_items.hh`) that is already used by the simulation zone, repeat
zone, bake node and index switch node. By using this system, the per-node
boilerplate can be removed significantly. This is especially important as we
plan to have dynamic socket amounts in more nodes in the future.
There are some user visible changes which make the node more consistent with
others:
* Move the menu items list into the properties panel as in 0c585a1b8a.
* Add an extend socket.
* Duplicating a menu item keeps the name of the old one.
There is also a (backward compatible) change in the Python API: It's now
possible to directly access `node.enum_items` and `node.active_index` instead of
having to use `node.enum_definition.enum_items`. This is consistent with the
other nodes. For backward compatibility, `node.enum_definition` still exists,
but simply returns the node itself.
Many API functions from `NodeEnumDefinition` like
`NodeEnumDefinition::remove_item` have been removed. Those are not used anymore
and are unnecessary boilerplate. If ever necessary, they can be implemented back
in terms of the socket-items system.
The socket-items system had to be extended a little bit to support the case for
the menu switch node where each socket item has a name but no type. Previously,
there was the case without name and type in the index switch node, and the case
with both in the bake node and zones. The system was trivial to extend to this
case.
Pull Request: https://projects.blender.org/blender/blender/pulls/121234
This integrates the functionality for `parallel_for_weighted` from 9a3ceb79de
into `parallel_for`. This reduces the number of entry points to the threading
API and also makes it easier to build higher level threading primitives. For
example, `IndexMask.foreach_*` may use `parallel_for` if a `GrainSize` is
provided, but can't use `parallel_for_weighted` easily without duplicating a
fair amount of code.
The default behavior of `parallel_for` does not change. However, now one can
optionally pass in `TaskSizeHints` as the last parameter. This can be used to
specify the size of individual tasks relative to each other and relative to the
grain size. This helps scheduling more equally sized tasks which generally
improves performance because threads are used more effectively.
One generally does not construct `TaskSizeHints` manually, but calls either
`threading::individual_task_sizes` or `threading::accumulated_task_sizes`. Both
allow specifying individual task sizes, but the latter should be used when the
combined size of consecutive tasks can be computed in O(1) time. This allows
splitting up the work more efficiently. It can often be used in conjunction with
`OffsetIndices`.
Pull Request: https://projects.blender.org/blender/blender/pulls/121127
On this level it makes sense to have a single `add_item` function
because the operator does not take any parameters. It's also
mostly the same for different kinds of socket items except
for one line.
This has some benefits:
* Nodes with dynamic socket amounts can remain more self-contained
(2 fewer files to edit with this patch).
* It's easier to reuse existing C++ code, reducing redundancy.
One new thing I'm doing here is to define operators in node files. It seems
reasonable to register operators that belong to a node together with that
node. Without this, code spreads out further than necessary without any real benefit.
This patch affects the simulation zone, repeat zone, bake node and index switch node.
The UI is slightly affected too. Since we had the UI defined in Python before,
it wasn't possible to integrate it into the node properties panel. That is possible
now and looks better anyway. The previous UI was an artifact of technical limitations.
Pull Request: https://projects.blender.org/blender/blender/pulls/121178
Add a "Mouse Position" node that outputs the location of the mouse
cursor in region space and the overall size of the region, both in pixel
units. Both outputs are integers to help reflect their pixel units.
If there the mouse position is ever accessible in sub-pixels, they can
easily be changed to floats.
Also add a "Wait for Cursor" option similar to the one for some built-in
operators that delay's the operator's execution until there is a mouse
click in the viewport. That way the operator can be called from menus
even though it is interactive. This option is placed in the node editor
header. When there are more options, it will be part of an "Options"
popover panel similar to the existing "Modes" and "types" popovers.
Combined with the viewport transform node, and other nodes like Raycast,
these features can allow making tools that create geometry where you
click in the scene.
Pull Request: https://projects.blender.org/blender/blender/pulls/121043
Add a node that outputs the transform of the viewport relative to the
self object's transform. This node can be used to build effects like
billboarding or aligning geometry to the current view. In combination
with the mouse position node in the future it will allow tools like
generating geometry at the mouse click position.
There are two output matrices. The first is the projection matrix
that takes positions in camera space and applies the final perspective
projection. The other is the "view" matrix which contains the location
and rotation of the camera. These are separate because though their
combination is useful, it isn't used like a typical rotation/transform matrix.
Pull Request: https://projects.blender.org/blender/blender/pulls/118680
Currently for node tools we create and evaluate a temporary depsgraph
with all the selected object data-blocks and all data-blocks referenced
by the node tree.
Needless to say, this can be very slow when those data-blocks contain
arbitrary procedural operations. Re-evaluating all the selected objects
is particularly because it will give a slowdown even in very basic uses
of node tools.
Originally I hoped that geometry nodes could be made to work with
original as well as evaluated data-blocks. But that would require far
too many tricky changes and arguably isn't right design-wise anyway.
Instead of that, this commit makes node tools dependency graph
evaluation more fine-grained in a few ways.
1. Remove the evaluation of selected objects. These are always visible
in the viewport and part of the active depsgraph anyway. To protect
against cyclic dependencies, we now compare `orig_id` instead of the
object pointer itself.
2. Evaluate the node group and its dependencies in a separate depsgraph
used only when necessary. This allows using the original node tree
without any copies when it doesn't reference any data-blocks.
3. Evaluate IDs from node group inputs (from the redo panel) in the extra
depsgraph as well, only when necessary.
Pull Request: https://projects.blender.org/blender/blender/pulls/120723
This makes the read and write API functions match more closely, and adds
asserts to check that the data size is as expected.
There are still a few places remaining that use BLO_read_data_address
and similar generic functions, these should eventually be replaced as well.
Pull Request: https://projects.blender.org/blender/blender/pulls/120994
Support for building blender with clang on windows on x64 was added
years ago but given there are no active users support has crumbled a
bit.
This PR brings the build system back into working order but upstream
patches in openVDB are still required for a successful build see PR
#120317 for details.
Blender when build with clang the classroom scenes rendered on the cpu
with cycles is seeing a 5% reduction in render time on both an
AMD 7700x and an Intel 14900k.
Add a simple node to compute the intersection, difference, or union
between SDF grids. This should be the first new use case for the
new volume grid nodes that wasn't possible before.
For naming and multi-inputs, the node uses the same design as the
mesh boolean node. We considered splitting each operation into a
separate node, but though most users considered these different
"modes" of the same operation.
One thing to keep in mind is that it's important for the grids to
have exactly the same transform. If they have different transforms,
the second grid must be resampled to match the first, because the
OpenVDB CSG tools have that requirement. Resampling is expensive
(for SDF grids it means a grid -> mesh -> grid round trip) and should
be avoided.
Pull Request: https://projects.blender.org/blender/blender/pulls/118879
`NOD_zone_socket_items.hh` contained code for different nodes. It's better to
split this into headers per node, because that scales better. Also it helps to
keep the code for each individual node more closely together.
Pull Request: https://projects.blender.org/blender/blender/pulls/120945
Move most code to `blender::bke::subdiv`. That helps organization
and makes using C++ in subdiv code easier, which will be useful for
removing the unnecessary opensubdiv C-API wrapper.
The main motivation for this is that it's part of a fix for #113377,
where I want to propagate the edit mesh pointers through copied
meshes in modifiers and geometry nodes, instead of just setting the
edit mesh pointer at the end of the modifier stack. That would have
two main benefits:
1. We avoid the need to write to the evaluated mesh, after evaluation
which means it can be shared directly among evaluated objects.
2. When an object's mesh is completely replaced by the mesh from another
object during evaluation (with the object info node), the final edit
mesh pointer will not be "wrong", allowing us to skip index-mapped
GPU data extraction.
Beyond that, using a shared pointer just makes things more automatic.
Handling of edit mesh data is already complicated enough, this way some
of the worry and complexity can be handled by RAII.
One thing to keep in mind is that the edit mesh's BMesh is still freed
manually with `EDBM_mesh_free_data` when leaving edit mode. I figured
that was a more conservative approach for now. Maybe eventually that
could be handled automatically with RAII too.
Pull Request: https://projects.blender.org/blender/blender/pulls/120276
Add utility function to handle supported types explicitly.
Right now Blur Attribute node generates all the attribute types except for bool.
So, there is redundant instances of functions for types:
float2, int2, int8_t, ColorGeometry4b, math::Quaternion, float4x4.
These types are not supported and should not be used for instantiation.
This makes the blender binary 42 KB smaller.
Pull Request: https://projects.blender.org/blender/blender/pulls/120639
Rewrite of Scale Elements. Main changes related with removing unnecessary
abstractions (like structures of fields). Next, by using grouping approach,
all data is represented as spans. This provide ability to unify code for
different domains. Using of general utils like IndexMask, Group processing
and array utils provides much more parallelism and better memory usage.
In result, this refactoring result in 4-10 average speed improvement in
attached benchmark file with different probability and scale of elements.
See the PR for more before/after timing information and a benchmark file.
Pull Request: https://projects.blender.org/blender/blender/pulls/115142
- "Log Encoding with Chroma inset and rotation": add "of primaries" in
the description of the AgX Log color space to better explain the
operation, based on wording in !106355.
- Remove a few double spaces.
- Make Line Art title case everywhere, to convey it's the system /
brand / product name and not the generic concept.
- "Copy Absolute coordinates or Normal vector" -> "of Normal Vector":
typo.
- "Makes a link between selected output in input sockets" ->
"Make...", "output and input": typo.
- "Purge Unused Data From This File" -> "from this": title case as per
HIGs.
- GPencil -> Grease Pencil: no reason to use an abbreviation here.
- "Around Current Frame" -> "Around Frame": actual name of the
onion-skinning method.
- "... (layer height for layer tool, i.e.)" -> "(i.e. the layer height
for the layer tool)": put "i.e." at the start of the sentence.
- Expand description of toe-in stereo camera option.
- "Children collections their parent-collection-specific settings" ->
"Children collections with their...": typo.
- "Generate vertex weights base on..." -> "based on" : typo, lower
case.
- Expand description of GP modifier properties, based on their mesh
counterparts.
- "AEnvelope" -> "Envelope": typo.
- "Falloff type the feather" -> "of the feather": typo.
- "usually make transition as long as effect strip": rephrase.
- "When disabled a users extensions directory is created" -> "a
user's": typo.
- "successfull" -> "successful": typo.
- "Remove all attributes... a single wildcard (*).": remove trailing
".".
- "..., use "Save Preferences."": remove trailing ".".
Some issues reported by Marina Veselkova and Tamar Mebonia.
Pull Request: https://projects.blender.org/blender/blender/pulls/120649
Extract
- Statuses for the external text editor
- Newly created enum node item
- Newly created plane track data
- Newly created custom orientation data
- Operator names in drag and drop menu (need to use operator's
translation context)
- GN attribute statistic node inputs
Disambiguate
- Single-letter colors: A and B can mean Alpha and Blue, or simply A
and B as in two operands in an operation
- Dissolve: issue reported by Tamar Mebonia in #43295
- Translate in the User Preferences. This introduces a new
BLT_I18NCONTEXT_EDITOR_PREFERENCES ("Preferences") translation
context
- Planar (reported by deathblood)
This one is incomplete, because there is currently no way to
disambiguate presets or GN fields. I don't see how either could be
achieved cleanly.
The former would need to define the context inside the preset and
evaluate the file prior to showing it in the presets menu, which
sound bad.
The latter would need to introduce an additional string inside
`FieldInput`s, which would be controversial given how little it
would be used.
Remove
- Unused translation `iface_("%s")` in toolbar
- Remove obsolete N_() tags in a few node descriptions.
Pull Request: https://projects.blender.org/blender/blender/pulls/119065
Regular topology mapping does not care about deduplication of relations. And
this is correct for a lot of the case where we expect creating difference of this
relations in next operations. But this is not the case for users, since this should
be actually trivial info. Due to this reason, construct full topology map and count
number of unique connections. Performance side: difference linear check and
hash set for different sizes of connections set.
Pull Request: https://projects.blender.org/blender/blender/pulls/118848
`interpolate_curve_attributes()` did not transfer `cyclic` attribute to
target curves. This fixes the the problem and allows Interpolate
Curves node to interpolate cyclic curves and also work between a cyclic
curve and a non-cyclic curve.
Pull Request: https://projects.blender.org/blender/blender/pulls/120460
Avoid copying the positions array into the evaluated edit hints array
that's used to support editing with deformed positions when there is
a topology-changing procedural operation. In a simple test in sculpt
mode with 706k curve points, memory usage went from 78 to 70 MB.
This adds more duplication would be ideal, mainly because retrieving
the data with write access and making implicit sharing info for arbitrary
arrays aren't abstracted by implicit sharing utilities. It may be possible
to improve both of those aspects, either now or in the future.
Pull Request: https://projects.blender.org/blender/blender/pulls/120146
We already expose two other types that don't have a directly
corresponding socket type-- float2 and byte colors. This also solves
the inability to write to the nurbs_order attribute in geometry nodes.
Fixes#119843
Pull Request: https://projects.blender.org/blender/blender/pulls/119879
