This adds support for attaching gizmos for input values. The goal is to make it
easier for users to set input values intuitively in the 3D viewport.
We went through multiple different possible designs until we settled on the one
implemented here. We picked it for it's flexibility and ease of use when using
geometry node assets. The core principle in the design is that **gizmos are
attached to existing input values instead of being the input value themselves**.
This actually fits the existing concept of gizmos in Blender well, but may be a
bit unintutitive in a node setup at first. The attachment is done using links in
the node editor.
The most basic usage of the node is to link a Value node to the new Linear Gizmo
node. This attaches the gizmo to the input value and allows you to change it
from the 3D view. The attachment is indicated by the gizmo icon in the sockets
which are controlled by a gizmo as well as the back-link (notice the double
link) when the gizmo is active.
The core principle makes it straight forward to control the same node setup from
the 3D view with gizmos, or by manually changing input values, or by driving the
input values procedurally.
If the input value is controlled indirectly by other inputs, it's often possible
to **automatically propagate** the gizmo to the actual input.
Backpropagation does not work for all nodes, although more nodes can be
supported over time.
This patch adds the first three gizmo nodes which cover common use cases:
* **Linear Gizmo**: Creates a gizmo that controls a float or integer value using
a linear movement of e.g. an arrow in the 3D viewport.
* **Dial Gizmo**: Creates a circular gizmo in the 3D viewport that can be
rotated to change the attached angle input.
* **Transform Gizmo**: Creates a simple gizmo for location, rotation and scale.
In the future, more built-in gizmos and potentially the ability for custom
gizmos could be added.
All gizmo nodes have a **Transform** geometry output. Using it is optional but
it is recommended when the gizmo is used to control inputs that affect a
geometry. When it is used, Blender will automatically transform the gizmos
together with the geometry that they control. To achieve this, the output should
be merged with the generated geometry using the *Join Geometry* node. The data
contained in *Transform* output is not visible geometry, but just internal
information that helps Blender to give a better user experience when using
gizmos.
The gizmo nodes have a multi-input socket. This allows **controlling multiple
values** with the same gizmo.
Only a small set of **gizmo shapes** is supported initially. It might be
extended in the future but one goal is to give the gizmos used by different node
group assets a familiar look and feel. A similar constraint exists for
**colors**. Currently, one can choose from a fixed set of colors which can be
modified in the theme settings.
The set of **visible gizmos** is determined by a multiple factors because it's
not really feasible to show all possible gizmos at all times. To see any of the
geometry nodes gizmos, the "Active Modifier" option has to be enabled in the
"Viewport Gizmos" popover. Then all gizmos are drawn for which at least one of
the following is true:
* The gizmo controls an input of the active modifier of the active object.
* The gizmo controls a value in a selected node in an open node editor.
* The gizmo controls a pinned value in an open node editor. Pinning works by
clicking the gizmo icon next to the value.
Pull Request: https://projects.blender.org/blender/blender/pulls/112677
Also see 06be295946.
These aren't all cases, but a few that I found by addding a static
assert in `MEM_new` so that it fails for trivially constructible types.
The current temperature unit adjusts to Celsius or Fahrenheit based on
unit system, but specifically for color temperatures the convention is
to display them in Kelvin, and it'd be strange to e.g. see 11240°F when
opening the white balance panel.
Therefore, this adds a dedicated Color Temperature unit, and uses it
for the two existing blackbody temperature inputs in shader nodes.
Pull Request: https://projects.blender.org/blender/blender/pulls/123337
By capturing multiple attributes with one node, the user can make sure that those
are evaluated together in the same context. This can be quite a bit more efficient
compared to capturing multiple fields separately (also because we don't optimize
grouping multiple capture nodes together yet).
The change is fully backward compatible. Forward compatibility has been added
for some cases. Especially, files created in older versions that are saved with this
newer version will still work in the older version.
Co-authored-by: Hans Goudey <hans@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/121665
Move all header file into namespace.
Unnecessary namespaces was removed from implementations file.
Part of forward declarations in header was moved in the top part
of file just to do not have a lot of separate namespaces.
Pull Request: https://projects.blender.org/blender/blender/pulls/121637
This allows node groups to have a description that is shown in the add menu
or when hovering over the node header.
This new description is stored in `bNodeTree.description`. Unfortunately, it
conflicts a bit with `ID.asset_data.description`. The difference is that the latter
only exists for assets. However, it makes sense for node groups to have
descriptions even if they are not assets (just like `static` functions in C++ should
also be able to have comments). In some cases, node groups are also generated
by addons for a specific purpose. Those should still have a description without
being reusable to make it easier to understand for users.
The solution here is to use the asset description if the node group is an asset,
and to use `bNodeTree.description` otherwise. The description is synced
automatically when marking or clearing assets.
A side benefit of this solution is that appended node group assets can keep their
description, which is currently always lost.
Pull Request: https://projects.blender.org/blender/blender/pulls/121334
Advanced ID copying code can now take a `new_owner_id` ID pointer parameter,
and use it to set the relevant 'loopback' pointer to its owner ID by the
copy code itself.
Besides avoiding the need for all code copying embedded IDs to set the
loopback pointer themselves, this also means that `lib_id` copying code
itself does not need to use `IDWALK_IGNORE_MISSING_OWNER_ID` anymore.
This change is not expected to have any effect in current codebase.
While currently, all cases where `BKE_id_owner_get` is called are
'safe', there are some points in code where the pointers ensureing the
relationship between an embedded ID and its owner are not (fully) valid.
This new option (`false` by default) allows to skip the debug asserts
ensuring the sanity of these 'owner <-> embedded' ID pointers in the
relevant `owner_pointer_get` callbacks.
This change is not expected to have any effect in current codebase.
This changes the menu switch socket to use the socket-items system
(`NOD_socket_items.hh`) that is already used by the simulation zone, repeat
zone, bake node and index switch node. By using this system, the per-node
boilerplate can be removed significantly. This is especially important as we
plan to have dynamic socket amounts in more nodes in the future.
There are some user visible changes which make the node more consistent with
others:
* Move the menu items list into the properties panel as in 0c585a1b8a.
* Add an extend socket.
* Duplicating a menu item keeps the name of the old one.
There is also a (backward compatible) change in the Python API: It's now
possible to directly access `node.enum_items` and `node.active_index` instead of
having to use `node.enum_definition.enum_items`. This is consistent with the
other nodes. For backward compatibility, `node.enum_definition` still exists,
but simply returns the node itself.
Many API functions from `NodeEnumDefinition` like
`NodeEnumDefinition::remove_item` have been removed. Those are not used anymore
and are unnecessary boilerplate. If ever necessary, they can be implemented back
in terms of the socket-items system.
The socket-items system had to be extended a little bit to support the case for
the menu switch node where each socket item has a name but no type. Previously,
there was the case without name and type in the index switch node, and the case
with both in the bake node and zones. The system was trivial to extend to this
case.
Pull Request: https://projects.blender.org/blender/blender/pulls/121234
The idea is to allow iterating over e.g. all ID usages of a node from a
whole nodetree, using the same generic handling as existing 'whole ID'
`foreach_id` code.
This is necessary in some cases wher a sub-data needs to processed
independently from any 'owner ID', e.g. in some copy/paste handling.
This is a pre-requirement for proper fix of nodes copy/paste (see
e.g. #120103).
Pull Request: https://projects.blender.org/blender/blender/pulls/121018
This makes the read and write API functions match more closely, and adds
asserts to check that the data size is as expected.
There are still a few places remaining that use BLO_read_data_address
and similar generic functions, these should eventually be replaced as well.
Pull Request: https://projects.blender.org/blender/blender/pulls/120994
`NOD_zone_socket_items.hh` contained code for different nodes. It's better to
split this into headers per node, because that scales better. Also it helps to
keep the code for each individual node more closely together.
Pull Request: https://projects.blender.org/blender/blender/pulls/120945
To know if link is connected to dangling reroute and can be skipped
as value-less, we need to know if reroute is dangling. This requires
graph traversal. Currently this is done by non-recursive iteration.
But this can lead quadratic complexity for some of the cases.
Other way is to make this linear while cache building.
Pull Request: https://projects.blender.org/blender/blender/pulls/120375
#114401 added forward compatibility code to remove unsupported socket
types and avoid crashing with unknown default_value data. However, this
did not update link pointers (which haven't been read at that point),
so the tree can end up with dangling pointers.
To fix this, removal of unsupported sockets is moved further back to a
point where links have been read and can be fixed accordingly.
Ported to main from #119630
Pull Request: https://projects.blender.org/blender/blender/pulls/119650
We already expose two other types that don't have a directly
corresponding socket type-- float2 and byte colors. This also solves
the inability to write to the nurbs_order attribute in geometry nodes.
Fixes#119843
Pull Request: https://projects.blender.org/blender/blender/pulls/119879
For historical reasons, the `multi_input_socket_index` was actually reversed
(large index comes first). This patch renames it to `multi_input_sort_id` and
adds a comment. This new name makes it less confusing that the id is reversed.
Pull Request: https://projects.blender.org/blender/blender/pulls/119652
"Own" (the adjective) cannot be used on its own. It should be combined
with something like "its own", "our own", "her own", or "the object's own".
It also isn't used separately to mean something like "separate".
Also, "its own" is correct instead of "it's own" which is a misues of the verb.
Seems to work OK in basic cases, but needs more work when copying
outside of Main at least.
Note: There is no behavioral changes expected from this commit.
Note that there are at least two known usecases for this change:
* Liboverrides, as with recursive resync and proxies conversion it
often ends up creating 'virtual' linked data that does not actually
exists in the library blend files.
* Complex versionning code (`do_versions_after_setup`) when it needs
to create new IDs (currently handling linked data that way is just not
supported!).
Implements #107847.
This data was 'hidden' away in a util in
`lib_query.cc`, which made it hard to discover and keep up-to-date.
However, as shown by e.g. #108407, critical low-level features in ID
management code, such as remapping, now rely on this information being
valid.
Also simplify `BKE_library_id_can_use_filter_id` and
`BKE_library_id_can_use_idtype` to make them more generic, relying on
IDTypeInfo to retrieve IDtype-specific info.
No behavioral changes expected here.
Implements the design from #116067.
The socket type is called "Matrix" but it is often referred to as "Transform"
when that's what it is semantically. The attribute type is "4x4 Matrix" since
that's a lower level choice. Currently matrix sockets are always passed
around internally as `float4x4`, but that can be optimized in the future
when smaller types would give the same behavior.
A new "Matrix" utilities category has the following set of initial nodes"
- **Combine Transform**
- **Separate Transform**
- **Multiply Matrices**
- **Transform Direction**
- **Transform Vector**
- **Invert Matrix**
- **Transpose Matrix**
The nodes and socket type are behind an experimental flag for now,
which will give us time to make sure it's the right set of initial nodes.
The viewer node overlay doesn't support matrices-- they aren't supported
for rendering in general. They also aren't supported in the modifier interface
currently. But they are supported in the spreadsheet, where the value is
displayed in a tooltip.
Pull Request: https://projects.blender.org/blender/blender/pulls/116166
This patch adds support for _Menu Switch_ nodes and enum definitions in
node trees more generally. The design is based on the outcome of the
[2022 Nodes Workshop](https://code.blender.org/2022/11/geometry-nodes-workshop-2022/#menu-switch).
The _Menu Switch_ node is an advanced version of the _Switch_ node which
has a customizable **menu input socket** instead of a simple boolean.
The _items_ of this menu are owned by the node itself. Each item has a
name and description and unique identifier that is used internally. A
menu _socket_ represents a concrete value out of the list of items.
To enable selection of an enum value for unconnected sockets the menu is
presented as a dropdown list like built-in enums. When the socket is
connected a shared pointer to the enum definition is propagated along
links and stored in socket default values. This allows node groups to
expose a menu from an internal menu switch as a parameter. The enum
definition is a runtime copy of the enum items in DNA that allows
sharing.
A menu socket can have multiple connections, which can lead to
ambiguity. If two or more different menu source nodes are connected to a
socket it gets marked as _undefined_. Any connection to an undefined
menu socket is invalid as a hint to users that there is a problem. A
warning/error is also shown on nodes with undefined menu sockets.
At runtime the value of a menu socket is the simple integer identifier.
This can also be a field in geometry nodes. The identifier is unique
within each enum definition, and it is persistent even when items are
added, removed, or changed. Changing the name of an item does not affect
the internal identifier, so users can rename enum items without breaking
existing input values. This also persists if, for example, a linked node
group is temporarily unavailable.
Pull Request: https://projects.blender.org/blender/blender/pulls/113445
There are still node versioning bits running after linking, for example
`version_geometry_nodes_replace_transfer_attribute_node`. This code
relies on node types being untouched at that point.
Move the unknown node type replacement from `ntreeSetTypes` into the
`ntreeUpdateAllNew` function. This is called _after_ late versioning.
Pull Request: https://projects.blender.org/blender/blender/pulls/117441
`UUID` generally stands for "universally unique identifier". The session identifier that
we use is neither universally unique, nor does it follow the standard. Therefor, the term
"session uuid" is confusing and should be replaced.
In #116888 we briefly talked about a better name and ended up with "session uid".
The reason for "uid" instead of "id" is that the latter is a very overloaded term in Blender
already.
This patch changes all uses of "uuid" to "uid" where it's used in the context of a
"session uid". It's not always trivial to see whether a specific mention of "uuid" refers
to an actual uuid or something else. Therefore, I might have missed some renames.
I can't think of an automated way to differentiate the case.
BMesh also uses the term "uuid" sometimes in a the wrong context (e.g. `UUIDFaceStepItem`)
but there it also does not mean "session uid", so it's *not* changed by this patch.
Pull Request: https://projects.blender.org/blender/blender/pulls/117350
