I cleaned up the cube brush tip code quite a bit; more remains
to be done. There is a new function to initialize cube
tip matrices, SCULPT_cube_tip_init. It's currently only
used by the paint brush, I'll need to do a bit of testing
before using it for clay strips and multiplane scrape.
Note: SCULPT_cube_tip_init uses the brush local matrix code
to avoid code duplication (and to take advantage of the debouncing
that is done there).
Nodes with names separated by a slash / can
not be searched by their initials.
This commit adds the slash character to
the list of separators for this type of
fuzzy search.
Pull Request: https://projects.blender.org/blender/blender/pulls/106838
This data should be initialized when building the mesh. If the arrays
aren't already initialized, there is already a bug. Theoretically this
could improve performance, since we can use `malloc` instead of
`calloc`. In practice I observed less than a 1% difference though.
These aren't used much in current code, but currently they created
offsets on the result curves, then just freed them again when copying
from the source data. In the future it might be better to completely
avoid using the base constructor in the first place.
Swap is commonly used to implement move assignment since it's short
and the logic is relatively simple. Use is here to avoid the need to
spell out the copying and freeing manually. The `BKE_id_free` call
at the end of the function will free whatever data was swapped.
The curve types and the runtime always have to be created when reading
the file from disk, so we might as well do that in `blend_read`, which
will help in the future when the offsets use implicit sharing.
Return null instead of an empty curves data-block, which amounts to
the same thing in geometry nodes, with less potential for error in
the rest of the function.
The existing utility cleared vertex group names and active attribute
names, which doesn't always make sense when the geometry is
replaced but the custom data layout remains mainly unchanged.
This code (looking for matching new IDs to restore by name) is called
from `set_app_data` after a .blend file has been read (also in memfile
undo case).
The part handling VSE clipboard to restore ID pointers is not really
needed, since pasting VSE strips already ensures stored ID pointers are
still valid, and tries to find a new matching one otherwise.
- "Lens" can be a transparent object used in cameras, or specifically
its property of focal length
- "Empty" can be an adjective meaning void, or an object type. The
latter is already disambiguated using `ID_ID`
- "New" and "Old" are adjectives that can have agreements in some
languages
- "Modified" is an adjective that can have agreement in some languages
- "Clipping" can be a property of a camera, or a behavior of the
mirror modifier
- "Value" in HSV nodes, see #105113
- "Area" in the Face Area geometry node, can mean a measurement or a
window type
- "New" is an adjective that can have agreement
- "Tab" can be a UI element or a whitespace character
- "Volume" can mean a measurement or an object type. The latter is
already disambiguated using `ID_ID`
These changes introduce the new `BLT_I18NCONTEXT_TIME` translation
context.
They also remove `BLT_I18NCONTEXT_VIRTUAL_REALITY`, which I added at
one point but then couldn't find which messages I wanted to fix with
it.
Ref #43295
Pull Request: #106718
Existing code was intrisically wrong, and also potentially very
innefficient.
Now tagging objects for deletion and removal is separated from actual
collection removal and object deletion. This makes the code safer,
simpler and more efficient.
NOTE: There is still an unsolved (already existing in original code)
issue with checks on objects that should not be deleted, noted in code.
Pull Request: https://projects.blender.org/blender/blender/pulls/106821
When trying to search for the Vector Math node with a translated
interface, the node did not come up because it did not use the proper
translation context.
The Vector Math node's RNA had a translation context added in
db87e2a638, in order for the Floor operation to be disambiguated. I
made a mistake and added the context to the entire node struct instead
of just the Operation prop. This had the result that the Vector Math
was searched with an empty context in the search menu, but could not
be found.
Replacing the translation context from the struct to the property
fixes the issue, and actually allows disambiguating operations such as
Floor, which wasn't achieved previously.
Pull Request: https://projects.blender.org/blender/blender/pulls/106579
The call to `channel_sum` requires that the `weights` array is at least
as large as the number of channels in the originating buffer.
Switch to use the span overload as well since the method that takes a
raw weights array is deprecated.
Thanks to @aras_p for debugging the issue.
Pull Request: https://projects.blender.org/blender/blender/pulls/106847
f36543c5f5 took care of syncing multiple viewport`s cameras, but wasnt
fully meeting intentions [which was to only do this if both viewports
are locked to the scene camera].
Check was only done for the viewport this was executed in (if this was
locked to the scene camera, it would change all other viewports as
well), now also check if the target viewport prefers to use its own
local camera instead and skip it in that case.
Pull Request: https://projects.blender.org/blender/blender/pulls/106799
This checkin will use OIIO to replace the image save/load code for BMP,
DDS, DPX, HDR, PNG, TGA, and TIFF.
This simplifies our build environment, reduces binary duplication,
removes large amounts of hard to maintain code, and fixes some bugs
along the way.
It should also help reduce rare differences between Blender and Cycles
which already uses OIIO for most situations. Or potentially makes them
easier to solve once discovered.
This is a continuation of the work for #101413
Pull Request: https://projects.blender.org/blender/blender/pulls/105785
It was that names of related "combo" operations
like Hue/Saturation/Value, *Dilate/Erode*
and Brightness/Contrast should be separated
by slashes in their names.
This patch changes this for the multiple nodes
and operators concerning Hue/Saturation/Value
across Blender.
Note1: This patch should only touch UI names
which do not need versioning and should not
break scripts.
Note2: This breaks first letter fuzzy search
for "hsv". It was noted by @HooglyBoogly that
the "/" character needs to be added to the
fuzzy search split list. Note however that such
search is already broken in Main for nodes like
Brightness/Contrast and Dilate/Erode which
already use slash separators
Pull Request: https://projects.blender.org/blender/blender/pulls/106721
Rename *Bright/Contrast* to *Brightness/Contrast* in order to avoid the use of shortened names and improve consistency within Blender and with industry conventions.
Reasoning:
The modified color characteristic is called *brightness*, not *bright*. You don't modify the *bright* of an image.
This also interferes with search in case someone searches for brightness, producing no results.
*Note: This patch should only touch UI names which do not need versioning. It leaves the actual property name in nodes for a future breaking release.*
Pull Request: https://projects.blender.org/blender/blender/pulls/104998
Before 6c774feba2, the maximum number of UV maps was
enforced throughout Blender. Now it has to be enforced in the few places
that actually have the limit. In the future the limit of the subsurf
could be lifted, but that isn't done now to keep the crash fix simple.
Since the positions of the final mesh are modified rather than a
separate array after d20f992322, the final mesh has
to become the deformed mesh after the deform modifiers, rather
than the input mesh. The arrays can't be shared anymore, but that
performance loss will be solved by implicit sharing shortly.
The new poly offsets were needed to interpolate attribute to a different
domain, but they were cleared when the legacy MPoly array was built.
Instead just clear the offsets a bit later after the other conversions.
Blender 3.5 has a performance regression in the image engine
that made the image engine 3-4x slower then 3.4. The cause of
this was the new way how panning was implemented.
This PR disables the new panning for now as a short term fix.
In the future the panning and improvements we did ensured
better performance when dealing with higher resolution images.
But the regression for regular images weren't acceptable.
This fix might introduce other performance regressions on
lower end systems.
In the future we still want to improve the performance to
get back to Blender 3.0 performance, but that requires more
work and has a different priority.
Pull Request: https://projects.blender.org/blender/blender/pulls/106803
This is mistake in the refactor of the DNA storage which unified
the camera and object storage. The bit which was missed from the
initial logic is that the autosave does not use regular file
write.
Detect this in the do-versioning code and rely on the new data
format when it exists.
A candidate for 3.5.1 release.
Pull Request: https://projects.blender.org/blender/blender/pulls/106811
Makes it possible to select multiple custom script directories in Preferences >
File Paths, replacing the single Scripts path option. Each of these directories
supports the regular script directory layout with a startup file (or files?),
add-ons, modules and presets.
When installing an add-on, the script directory can be chosen.
NOTE: Deprecates the `bpy.types.PreferencesFilePaths.script_directory`
property, and replaces `bpy.utils.script_path_pref` with
`bpy.utils.script_paths_pref`.
Pull Request: https://projects.blender.org/blender/blender/pulls/104876
Legacy drivers don't support auto type casting in comparisons.
This PR fixes some comparisons cast.
Thanks to Johannes J. for working/thinking along with the PR.
Pull Request: https://projects.blender.org/blender/blender/pulls/106789
