Use a regular context menu as a fallback for the outliner.
If there are no specific actions for the item under the cursor,
fall through to opening a regular menu.
This lets menu search find the context menu items which were previously
unavailable as menu search wont run operators.
The Layer brush was in Blender before 2.81, when the sculpt API was
introduced. It had a huge amount of bugs and glitches which made it
almost unusable for anything but the most trivial cases. Also, it needed
some hacks in the code just to support the persistent base.
The brush was completely rewritten using the Sculpt API. It fulfills the
same use case as the old one, but it has:
- All previous artifacts fixed
- Simpler code
- Persistent base now works with multires thanks to the sculpt API
- Small cursor widget to preview the layer height
- More controllable and smoother strength and deformation
- More correct masking support
- More predictable invert support. When using persistent base, the brush invert mode resets to layer height 0, instead of jumping from +1 to -1. The brush can still be inverted in the brush direction property.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7147
This mesh filter sharpens and smooths the mesh based on its curvature,
resulting in pinching hard edges and polishing flat surfaces. It fixes
most of the artifacts of the voxel remesher and those produced when
sculpting hard surfaces and stylized models with creasing and flattening
brushes.
It needs and accumulate_displacement step before each filter iteration which
can't be multithreaded in an easy way (it would need something to sync the
threads when modifying the data of neighbors in a different node), but this
does not affect performance in a significant way.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7335
When using the shift-smooth mode, sculpt_update_cache_invariants is
changing the brush datablock of the paint session if it finds a brush
named "Smooth" (which is a huge hack the brush management project should
try to solve). This is done after the PaintStroke data in the modal
operator is created, which holds a reference to the active brush in the
paint session that was active when the operator started. Because of
this, the StrokeCache was getting the correct smooth brush values but
the paint modal operator was applying the wrong ones from the previous
brush. This was causing the smooth brush behaves unpredictably depending
on the current active brush.
This patch updates the brush in PaintStroke on each modal callback, so
it always gets the values from the current active brush in the Paint
Session.
The way brush switching works and a way to make it more flexible needs
to be discussed in the future as part of the brush management project.
The default smooth brush parameters and curves will probably need to
be updated after this change, as previously they were set using an
incorrect behavior.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7354
All tools should now use the API function to get the active face set
directly from the face under the cursor.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7362
The operator was disabled when it was added because Face Sets were not
supported in Multires.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7312
This solution involves adding a uniform to each fragment shader that is
used by gizmo drawing and use the framebuffer state to set this uniform
accordingly.
This solution can also be carried to external shaders (addons).
A single line of code would then be enough to fix the issue.
The only trickery here is the dummy define:
`#define srgb_to_framebuffer_space(a)`
This is in order to avoid breaking other DRW shaders that use the same
fragment shader code but do not need the tranformation.
Related to T74139
Reviewed By: brecht, campbellbarton
Differential Revision: https://developer.blender.org/D7261
Geometry that was just added to sculpt mode has the SCULPT_FACE_SET_NONE
assigned, so it was hidden by default. By doing this when entering
sculpt mode a new visible face set is created for it, making it easier
to isolate it again if you want to do further tweaking with the sculpt
tools.
Also, this also fixes the issue that may happen when changing the mesh
visibility in edit mode. Now visibility changes done outside sculpt mode
are stored in the face sets when entering sculpt mode, so mesh
visibility should stay the same.
Reviewed By: jbakker
Maniphest Tasks: T75104
Differential Revision: https://developer.blender.org/D7249
mouse over
Caused by rB5929dd7129f6.
Above commit would reset the gizmo highlight on node mouseover.
This would also assert in gizmo_rect_pivot_from_scale_part() and stop
the drag.
So now, only reset the gizmo when we are not in EVT_GIZMO_UPDATE,
allowing for starting the tweak outside a node and then travelling
'inside' while still preventing to use it over a node when starting a
tweak there.
Maniphest Tasks: T75535
Differential Revision: https://developer.blender.org/D7383
Issue was with setting of frame to load from an image sequence,
synchronization was not done properly at some point, leading to
generation of an invalid final filepath to be read.
Use a single color by object in grease pencil is not practical because is necessary to see all layers.
To tint by layer, the layer tint parameter is used and not the material color as is done in other modes.
This function has been backported from 2.82 because was removed in the 2.83 refactor.
Add an option to solidify complex which will make faces which have thickness
controlled by vertex weights flat/even, and parallel to their original face.
For each face it uses the minimal weight assigned to its vertices to control
the thickness.
This will help users for example in architecture or basic CAD design by finally
making solidify work there at all if altering thickness is needed.
Differential Revision: https://developer.blender.org/D7340
Reviewed and minor cleanups by Batien Montagne (@mont29).
Adds a slider to solidify which allows the user to add bevel weight on the outside
or remove bevel weight from the inside.
Also includes a very small improvment for working with subsurface modifier where
the rim edge in complex solidify will now also have a chance to get a crease if
there is only two adjacent edges.
Differential Revision: https://developer.blender.org/D7334
Reviewing and minor cleanups: Bastien Montagne (@mont29).
The problem was that in direct_link_id_restore_recalc, recalc_undo_accumulated
should contain the changes from the target state to the current state. However
it had already been cleared at that point, to start accumulating changes up to
the next undo push.
Delaying the clear of this flag seems like the obvious solution, but it's hard
to find the right place for that (if there is one). Instead this splits up the
flag into two separate variables.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D7402
- Show dimmed text for the menu entries leading up to the menu item.
- Show icons between the menu text and menu item.
- Use unicode right pointing triangle instead of arrow.
The idea is to push both base mesh geometry and PBVH coordinates
so it is possible to undo everything without loosing data which was
not flushed from sculpt session to base mesh.
It is possible do memory optimization to avoid push custom data
layers which are not touched by operator, but before doing that
better to ensure this is a correct and working approach.
Differential Revision: https://developer.blender.org/D7381
* Implemented the algortihm that would merge vertices to the weighted
center between them.
* Exposed the merge threshold to the user.
The new default tolerance is 0.0001 (versionning code ensures that
previous default value remains in use to avoid any change in existing
files).
Review and minor changes/cleanups from Bastien Montagne (@mont29).
- The word 'Flip' is incorrect. 'Swap' or 'Switch' is correct.
- In Blender, we use 'primary' & 'secondary' color swatches, not 'foreground' and 'background'
Move sample operator functions to `ed_util_imbuf.c` and change common functions,
so they can be used in image editor and sequencer.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D7315
Add method to invalidate strip cache in range of non-overlapping strip.
Invalidate original strip in range of new strip created by cutting.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7313
Cache must be invalidated before and after transformation,
so all frames are properly invalidated.
This also fixes wrong invalidated type, composite is enough here.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7341
`seq_free_animdata()` removes fcurve pointers belonging to strips from
`Scene` CoW datablock's `AnimData` during `BKE_scene_graph_update_for_newframe`.
This causes problems with updating animation.
This worked before rBbe2e41c397ba, because `AnimData` was freed by `BKE_animdata_free()`
before `seq_free_animdata()` was executed, so it had no data to operate on and returned
on precondition `if (scene->adt == NULL || scene->adt->action == NULL)`
Reviewed By: mont29, brecht
Maniphest Tasks: T74897
Differential Revision: https://developer.blender.org/D7264
Ensure we use the first frame as filepath so we can compute the number of
leading zeros. For file validation, always test the first frame rather than
the current scene frame.
