The goal is to solve confusion of the "All rights reserved" for licensing
code under an open-source license.
The phrase "All rights reserved" comes from a historical convention that
required this phrase for the copyright protection to apply. This convention
is no longer relevant.
However, even though the phrase has no meaning in establishing the copyright
it has not lost meaning in terms of licensing.
This change makes it so code under the Blender Foundation copyright does
not use "all rights reserved". This is also how the GPL license itself
states how to apply it to the source code:
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software ...
This change does not change copyright notice in cases when the copyright
is dual (BF and an author), or just an author of the code. It also does
mot change copyright which is inherited from NaN Holding BV as it needs
some further investigation about what is the proper way to handle it.
Viewer node paths usually start with the modifier, but in pinned
node editors the tree may not be used by the object in context.
In that case the modifier part of the path should be ignored.
The viewer node is always disabled in that case.
Pull Request: https://projects.blender.org/blender/blender/pulls/105826
This adds support for cursor snapping for the new curves object.
It implements a function `transverts_from_curves_positions_create` (to separate the logic from the `Curves` object type). That function is then C wrapped by `ED_curves_transverts_create` and finally used in `ED_transverts_create_from_obedit`.
Pull Request #104967
`CTX_wm_operator_poll_msg_set()` is covered by the translation script
and always translates these strings. Checked with Bastien, he prefers
not having the redundancy here.
These warnings can reveal errors in logic, so quiet them by checking
if the features are enabled before using variables or by assigning
empty strings in some cases.
- Check CMAKE_THREAD_LIBS_INIT is set before use as CMake docs
note that this may be left unset if it's not needed.
- Remove BOOST/OPENVDB/VULKAN references when disable.
- Define INC_SYS even when empty.
- Remove PNG_INC from freetype (not defined anywhere).
The slider component can now be told to not use CTRL for toggling stepped
10% increments. This is useful when the operator that uses the slider needs
that modifier key for its own purposes.
Always hide the area header contents when the slider UI component is used.
This prevents the slider from being drawn semi-transparently on top of
other UI elements.
Add a field `is_bidirectional` to sliders (`tSlider`). By defafult this
is `false`; when set to `true` the slider allows negative values.
The allowed ranges are now:
- No overshoot, no bidirectional: `[0, 1]`
- No overshoot, bidirectional: `[-1, 1]`
- Overshoot, no bidirectional: `[0, infinity)`
- Overshoot, bidirectional: `(-infinity, infinity)`
This will be used for the pose library blending operator, where sliding
to the right (postitive) blends as normal, and sliding to the left
(negative) flips the pose before blending.
Required by Metal backend for efficient shader compilation. EEVEE material
resource binding permutations now controlled via CreateInfo and selected
based on material options. Other existing CreateInfo's also modified to
ensure explicitness for depth-writing mode. Other missing bindings also
addressed to ensure full compliance with the Metal backend.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D16243
This patch adds an integer identifier to nodes that doesn't change when
the node name changes. This identifier can be used by different systems
to reference a node. This may be important to store caches and simulation
states per node, because otherwise those would always be invalidated
when a node name changes.
Additionally, this kind of identifier could make some things more efficient,
because with it an integer is enough to identify a node and one does not
have to store the node name.
I observed a 10% improvement in evaluation time in a file with an extreme
number of simple math nodes, due to reduced logging overhead-- from
0.226s to 0.205s.
Differential Revision: https://developer.blender.org/D15775
Brush cursors were missing when opening a file saved in sculpt/vertex-/
weightpaint mode.
Since we dont do a full modeswitch on file load in `ED_editors_init` for
grease pencil since rBde994d6b7b1c, we were missing the brush cursor
toggling [`ED_gpencil_toggle_brush_cursor`] normally done in
`ED_gpencil_setup_modes`.
This is now explicitly added for any greasepencil paintmode (in case
object is active).
Maniphest Tasks: T102685
Differential Revision: https://developer.blender.org/D16603
These comments were from rBcc7460eaa491 / rBde994d6b7b1c /
rB7037ff920447 but ended up in a confusing state.
Moved into the right places and reworded appropriately.
Spotted while looking into T102685.
Maniphest Tasks: T102685
Differential Revision: https://developer.blender.org/D16601
Adds a new `source/blender/asset_system` directory and moves asset
related files from BKE to it. More asset related code can follow
(e.g. asset indexing, ED_assetlist stuff) but needs further work to
untangle it. I also kept `BKE_asset.h` and `asset.cc` as is, since they
deal with asset DNA data mostly, thus make sense in BKE.
Motivation:
- Makes the asset system design more present (term wasn't even used in
code before).
- An `asset_system` directory is quite descriptive (trivial to identify
core asset system features) and makes it easy to find asset code.
- Asset system is mostly runtime data, with little relation to other
`Main`/BKE/DNA types.
- There's a lot of stuff in BKE already. It shouldn't be just a dump for
all stuff that seems core enough.
- Being its own directly helps us be more mindful about encapsulating
the module well, and avoiding dependencies on other modules.
- We can be more free with splitting files here than in BKE.
- In future there might be an asset system BPY module, which would then
map quite nicely to the `asset_system` directory.
Checked with some other core devs, consensus seems that this makes
sense.
Using varargs had the disadvantages, replace with a macro which has
some advantages.
- Arguments are type checked.
- Less verbose.
- Unintended NULL arguments would silently terminate joining paths.
- Passing in a NULL argument warns with GCC.
This is the conventional way of dealing with unused arguments in C++,
since it works on all compilers.
Regex find and replace: `UNUSED\((\w+)\)` -> `/*$1*/`
This adds support for showing geometry passed to the Viewer in the 3d
viewport (instead of just in the spreadsheet). The "viewer geometry"
bypasses the group output. So it is not necessary to change the final
output of the node group to be able to see the intermediate geometry.
**Activation and deactivation of a viewer node**
* A viewer node is activated by clicking on it.
* Ctrl+shift+click on any node/socket connects it to the viewer and
makes it active.
* Ctrl+shift+click in empty space deactivates the active viewer.
* When the active viewer is not visible anymore (e.g. another object
is selected, or the current node group is exit), it is deactivated.
* Clicking on the icon in the header of the Viewer node toggles whether
its active or not.
**Pinning**
* The spreadsheet still allows pinning the active viewer as before.
When pinned, the spreadsheet still references the viewer node even
when it becomes inactive.
* The viewport does not support pinning at the moment. It always shows
the active viewer.
**Attribute**
* When a field is linked to the second input of the viewer node it is
displayed as an overlay in the viewport.
* When possible the correct domain for the attribute is determined
automatically. This does not work in all cases. It falls back to the
face corner domain on meshes and the point domain on curves. When
necessary, the domain can be picked manually.
* The spreadsheet now only shows the "Viewer" column for the domain
that is selected in the Viewer node.
* Instance attributes are visualized as a constant color per instance.
**Viewport Options**
* The attribute overlay opacity can be controlled with the "Viewer Node"
setting in the overlays popover.
* A viewport can be configured not to show intermediate viewer-geometry
by disabling the "Viewer Node" option in the "View" menu.
**Implementation Details**
* The "spreadsheet context path" was generalized to a "viewer path" that
is used in more places now.
* The viewer node itself determines the attribute domain, evaluates the
field and stores the result in a `.viewer` attribute.
* A new "viewer attribute' overlay displays the data from the `.viewer`
attribute.
* The ground truth for the active viewer node is stored in the workspace
now. Node editors, spreadsheets and viewports retrieve the active
viewer from there unless they are pinned.
* The depsgraph object iterator has a new "viewer path" setting. When set,
the viewed geometry of the corresponding object is part of the iterator
instead of the final evaluated geometry.
* To support the instance attribute overlay `DupliObject` was extended
to contain the information necessary for drawing the overlay.
* The ctrl+shift+click operator has been refactored so that it can make
existing links to viewers active again.
* The auto-domain-detection in the Viewer node works by checking the
"preferred domain" for every field input. If there is not exactly one
preferred domain, the fallback is used.
Known limitations:
* Loose edges of meshes don't have the attribute overlay. This could be
added separately if necessary.
* Some attributes are hard to visualize as a color directly. For example,
the values might have to be normalized or some should be drawn as arrays.
For now, we encourage users to build node groups that generate appropriate
viewer-geometry. We might include some of that functionality in future versions.
Support for displaying attribute values as text in the viewport is planned as well.
* There seems to be an issue with the attribute overlay for pointclouds on
nvidia gpus, to be investigated.
Differential Revision: https://developer.blender.org/D15954
Add the Slider UI to pose blending. This adds a slider with percentages,
and controls for precision control and incremental control.
Reviewed By: sybren
Maniphest Tasks: T90182
Differential Revision: https://developer.blender.org/D14984
Correction of U.dpi to hold actual monitor DPI. Simplify font sizing by
omitting DPI as API argument, always using 72 internally.
See D15961 for more details.
Differential Revision: https://developer.blender.org/D15961
Reviewed by Campbell Barton
When a change happens which invalidates view layers the syncing will be postponed until the first usage.
This will improve importing or adding many objects in a single operation/script.
`BKE_view_layer_need_resync_tag` is used to tag the view layer to be out of sync. Before accessing
`BKE_view_layer_active_base_get`, `BKE_view_layer_active_object_get`, `BKE_view_layer_active_collection`
or `BKE_view_layer_object_bases` the caller should call `BKE_view_layer_synced_ensure`.
Having two functions ensures that partial syncing could be added as smaller patches in the future. Tagging a
view layer out of sync could be replaced with a partial sync. Eventually the number of full resyncs could be
reduced. After all tagging has been replaced with partial syncs the ensure_sync could be phased out.
This patch has been added to discuss the details and consequences of the current approach. For clarity
the call to BKE_view_layer_ensure_sync is placed close to the getters.
In the future this could be placed in more strategical places to reduce the number of calls or improve
performance. Finding those strategical places isn't that clear. When multiple operations are grouped
in a single script you might want to always check for resync.
Some areas found that can be improved. This list isn't complete.
These areas aren't addressed by this patch as these changes would be hard to detect to the reviewer.
The idea is to add changes to these areas as a separate patch. It might be that the initial commit would reduce
performance compared to master, but will be fixed by the additional patches.
**Object duplication**
During object duplication the syncing is temporarily disabled. With this patch this isn't useful as when disabled
the view_layer is accessed to locate bases. This can be improved by first locating the source bases, then duplicate
and sync and locate the new bases. Will be solved in a separate patch for clarity reasons ({D15886}).
**Object add**
`BKE_object_add` not only adds a new object, but also selects and activates the new base. This requires the
view_layer to be resynced. Some callers reverse the selection and activation (See `get_new_constraint_target`).
We should make the selection and activation optional. This would make it possible to add multiple objects
without having to resync per object.
**Postpone Activate Base**
Setting the basact is done in many locations. They follow a rule as after an action find the base and set
the basact. Finding the base could require a resync. The idea is to store in the view_layer the object which
base will be set in the basact during the next sync, reducing the times resyncing needs to happen.
Reviewed By: mont29
Maniphest Tasks: T73411
Differential Revision: https://developer.blender.org/D15885
- ACTIVE flag is no longer in use.
- DESELECT was used in some places as an alias for false,
even though this could arguably help readability, in practice this
was often passed with a selection flag leading to confusing calls
such as `select_beztriple(bezt, DESELECT, SELECT, HIDDEN)`.
Replace SELECT/DESELECT with true/false in these cases.
- Remove ED_types.h. Add a 'SELECT' definition to DNA_anim_types.h,
for fcurve_test, we could use a shared DNA header, or remove use of
the define entirely in favor of typed enums.
The only difference between `GPU_SHADER_2D_LINE_DASHED_UNIFORM_COLOR`
and `GPU_SHADER_3D_LINE_DASHED_UNIFORM_COLOR` is that in the vertex
shader the 2D version uses `vec4(pos, 0.0, 1.0)` and the 3D version
uses `vec4(pos, 1.0)`.
But VBOs with 2D attributes work perfectly in shaders that use 3D
attributes. Components not specified are filled with components from
`vec4(0.0, 0.0, 0.0, 1.0)`.
So there is no real benefit to having two different shader versions.
The only real difference between `GPU_SHADER_2D_UNIFORM_COLOR` and
`GPU_SHADER_3D_UNIFORM_COLOR` is that in the vertex shader the 2D
version uses `vec4(pos, 0.0, 1.0)` and the 3D version uses
`vec4(pos, 1.0)`.
But VBOs with 2D attributes work perfectly in shaders that use 3D
attributes. Components not specified are filled with components from
`vec4(0.0, 0.0, 0.0, 1.0)`.
So there is no real benefit to having two different shader versions.
This will simplify porting shaders to python as it will not be
necessary to use a 3D and a 2D version of the shaders.
In python the new name for '2D_UNIFORM_COLOR'' and '3D_UNIFORM_COLOR'
is 'UNIFORM_COLOR', but the old names still work for backward
compatibility.
Differential Revision: https://developer.blender.org/D15836
- Use the proper context (Operator, since that is what the cursor
keymap status uses)
- Add a few missing message extraction tags
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15867
With libepoxy we can choose between EGL and GLX at runtime, as well as
dynamically open EGL and GLX libraries without linking to them.
This will make it possible to build with Wayland, EGL, GLVND support while
still running on systems that only have X11, GLX and libGL. It also paves
the way for headless rendering through EGL.
libepoxy is a new library dependency, and is included in the precompiled
libraries. GLEW is no longer a dependency, and WITH_SYSTEM_GLEW was removed.
Includes contributions by Brecht Van Lommel, Ray Molenkamp, Campbell Barton
and Sergey Sharybin.
Ref T76428
Differential Revision: https://developer.blender.org/D15291
