This implements the `stroke_arrange` operator for grease pencil v3.
This behaves the same as `GPENCIL_OT_stroke_arrange` but renamed to `stroke_reorder`.
It should be more clear what the operator does.
Note: This also adds new key binds.
Co-authored-by: Falk David <filedescriptor@noreply.localhost>
Pull Request: https://projects.blender.org/blender/blender/pulls/116682
This pull request adds the ability for the `propagation_steps` value
for certain automasking settings to be applied globally instead of
using the per-brush attribute.
Previously, while the flag settings were stored at the brush and global
level, the `propagation_steps` value would always change the brush
attribute even when using the global menu.
Addresses #102377
Pull Request: https://projects.blender.org/blender/blender/pulls/117316
The recently landed PR #115798has made it so the
hotkey `K` would call `anim.keyframe_insert_menu` with the property
`always_prompt` set to `True`.
This property still defaulted to `False` when called
from the menu leading to inconsistent
behavior when a keying set is active.
Fix it by setting `always_prompt` to `True` for the menu entries.
Pull Request: https://projects.blender.org/blender/blender/pulls/117511
The previous commit introduced a new `RPT_()` macro to translate
strings which are not tooltips or regular interface elements, but
longer reports or statuses.
This commit uses the new macro to translate many strings all over the
UI.
Most of it is a simple replace from `TIP_()` or `IFACE_()` to
`RPT_()`, but there are some additional changes:
- A few translations inside `BKE_report()` are removed altogether
because they are already handled by the translation system.
- Messages inside `UI_but_disable()` are no longer translated
manually, but they are handled by a new regex in the translation
system.
Pull Request: https://projects.blender.org/blender/blender/pulls/116804
Pull Request: https://projects.blender.org/blender/blender/pulls/116804
Make it possible to nest bone collections. The data structure on the
armature is still a flat array. It is organised as follows:
- Sibling collections (i.e. ones with the same parent) are stored
sequentially in the array.
- Each bone collection keep track of the number of children, and the
index of the first child.
- Root collections (i.e. ones without parent) are stored as the first
elements in the array.
- The number of root collections is stored on the Armature.
This commit also contains the following:
- Replaced the flat UIList of bone collections with a tree view.
- Updated the M/Shift+M operators (move/assign to collection) to work
with hierarchical bone collections.
- Updated RNA interface to expose only root collections at
`armature.collections`. All collections are available on
`armature.collections.all`, and children at `bonecollection.children`.
- Library override support. Only new roots + their subtrees can be added
via overrides.
See https://projects.blender.org/blender/blender/issues/115934
Co-authored with @nathanvegdahl and @nrupsis.
Pull Request: https://projects.blender.org/blender/blender/pulls/115945
Extract:
- Compositor error messages.
- `bUnitDef`s were broken after cleanup commit 2b77cd726d. Since each
unit's "display name" is now preceded by a consistent "name_display"
comment, the regex which extracts the unit is greatly simplified.
It now relies on the presence of the comment instead of the struct
order.
- "Preset" menu and "Apply Preset" button from the curveprofile
template.
- Operator labels from the catalog context menu.
Disambiguate:
- "Bake Data": can mean "Which data to bake" (verb), or "The data that
were baked" (noun).
- "Cache" in the Simulation Nodes panel is a verb, not a noun.
- "Mix" in the snapping menu is a noun, not a verb.
- "Top" and "Bottom" can mean the upper part of an object or the
highest point or element of something like a menu or list.
Pull Request: https://projects.blender.org/blender/blender/pulls/115963
Previously, attribute values were only visualized as color overlay in the 3d viewport.
Now it's possible to optionally show the attribute values as text. This can be enabled
in the `Viewer Node` overlay settings in the 3d view.
This is just the first initial version. More work towards making it look better
will be done next.
Pull Request: https://projects.blender.org/blender/blender/pulls/115664
Split the `armature.collection_assign` operator in two. Before, the
operator could do two things: assign selected bones to the active/named
bone collection, or create a new bone collection with the given name.
This is now split up, where `armature.collection_assign` only assigns to
existing bone collections, and `armature.collection_create_and_assign`
always creates a new bone collection.
This makes the purpose of each operator clearer & more predictable.
- "Frame Step" -> "Number of frames to skip forward while baking each
frame": expand description which was just copying the prop name.
- "b-bone" -> "B-Bone": title case.
- "Volumes Lighting" -> "Volume Lighting": typo.
- "Volumes Shadows" -> "Volume Shadows": typo.
- "Insert Blank Keyframe (All Layer)" -> "(All Layers)": typo.
- "the an" -> "an", typo.
- "Inverse" -> "Invert": use verb instead of noun for an action.
- "Desination" -> "Destination": typo.
- "Hides all other F-Curves other than the ones being framed": remove
extra "other".
- "Remove Bone from Bone collections" -> "Collection", singular because
the operator is only applied to the active collection. Also title
case on "Collection".
- "Change Stroke material with selected material" -> "Assign the
active material slot to the selected strokes": rephrase by reusing
the message from the non-Grease Pencil materials.
- "VisAction", "VisArea" -> "Visibility Action", "Visibility Area":
expand abbreviation. This is not exposed in the UI right now but
will show up in the API docs.
- "Stop Mode Right / Global Down" -> "Stop Move" (typo).
- "... for node input %s": remove extra space.
- "Move along their normal" -> "Move shadows along their normal":
rephrase unclear sentence.
- "Stat Vis" -> "Mesh Analysis": stands for "Statistical
visualization"? Unclear and not shown anywhere. Reuse the label
specified in the UI code instead.
- " Output data...": remove leading space.
- "Attribute domain for the selection and group id inputs": title case
on "Selection" and "Group ID" as that is how they appear in the UI.
- "Ior" -> "IOR": uppercase acronym, for consistency.
Pull Request: https://projects.blender.org/blender/blender/pulls/115964
Remove "Invert Visible" from the face sets menu, since those concepts
are no longer tied together, except for some convenience features to
toggle visibility of some face sets.
On the code side, the `SCULPT_OT_face_set_invert_visibility` operator
is replaced by `PAINT_OT_visibility_invert`. It inverts vertex visibility
instead of face visibility, which mostly has the same results, except
for multires sculpting where it no longer "downgrades" visibility to
base mesh faces.
This PR adds the drawing placement modes from GPv2.
The drawing placement defines the depth (origin, view, surface, etc.) and a plane (view, cursor, xz, etc.).
This introduces a new helper class `DrawingPlacement` that does all of the internals to find the correct projection and just exposes a simple function to project from screen space to the drawing plane/surface.
Note: Drawing on other strokes currently doesn't work, because GPv3 can't be rendered to image yet. We use the depth buffer of the grease pencil render result to find the right depth.
Pull Request: https://projects.blender.org/blender/blender/pulls/115602
This operator (`SCULPT_OT_reveal_all`) is redundant with
the "Hide Show" operator (`PAINT_OT_hide_show`). Since
the latter was recently changed to be much faster, remove the
former and update keymaps and menus. The industry compatible
keymap actually already contains the hide/show operator.
Pull Request: https://projects.blender.org/blender/blender/pulls/115629
This PR includes the popup menu used to select a material pressing `U` key.
The menu is used in Draw, Sculpt and Vertex paint mode in GPv2 but this patch only includes Draw mode because other modes are not avaliable in GPv3 yet.
Related to #114203
Pull Request: https://projects.blender.org/blender/blender/pulls/114694
- New Operator: GREASE_PENCIL_OT_layer_hide
- New Operator: GREASE_PENCIL_OT_layer_reveal
- Added menus to Edit and Draw Modes
- Added Keymap via _template_items_hide_reveal_actions()
Note: Operator names were changed for consistency with other layers operators that use _layer_ on their names
Pull Request: https://projects.blender.org/blender/blender/pulls/114348
When animators want to key something in the viewport,
the code needs to know *which properties* should be keyed of that selected thing.
So far that was done with keying sets, and a pop-up that let's
you choose the keying set to use. You can get rid of the popup by
choosing a keying set ahead of time. But that is also not always desirable.
That pop-up is quite confusing and gives way too many options.
To simplify this process this PR adds a User Preference option to choose one or more of:
* Location
* Rotation
* Scale
* Rotation Mode
* Custom Properties
Now whenever the `I` key is pressed in the viewport,
and no keying set is enabled, it reads the preferences for which channels to insert.
# User Facing changes
* The popup will not be shown when pressing the hotkey,
but you can still explicitly use keying sets by going to the menu
* Which channels are keyed is defined by a User Preference setting under animation
* when a keying set is used explicitly, the User Preference settings are ignored
Part of #113278
Pull Request: https://projects.blender.org/blender/blender/pulls/113504
Extend node tools to display tool assets in object mode as well
as edit and sculpt modes. For consistency with existing Blender
design, selection cannot be set and is just "true" in object mode
because it can't be visualized. The visibility of tools can be
customized per object type in object mode as well.
See #101778
Pull Request: https://projects.blender.org/blender/blender/pulls/114819
Discussed in #114646.
This commit transforms the "alt_navigation" option of the transform
operators into a new modal key item. "PASSTHROUGH_NAVIGATE"
In addition to cleaning up a lot of the code, it allows you to
customize the key chosen to navigate while transforming.
Adds a new scene tool setting `use_grease_pencil_multi_frame_editing`.
The `foreach_*_drawing` functions are moved to the `ed::greasepencil` namespace in the editor, since they are now context sensitive and depend on the toolsetting. They are now named `retrieve_editable_drawings` and `retrieve_visible_drawings` and return
an array of drawings instead of calling a callback function.
Pull Request: https://projects.blender.org/blender/blender/pulls/114283
Changes to edit mode mesh overlays, use hue shift instead of color
fading/darkening for selection mode visual differentiation, and some
theme changes to improve the display of mesh edges and faces with good
selection visibility.
- Removed "edge" toggle from edit mode overlays panel.
- No longer halves the edge and face alpha depending on selection mode.
Half the face alpha in wire-frame mode. For better visibility on most
themes.
Ref !111431
Adds context menus and updates existing menus with newly added operators
- Updates menu texts and separators
- Add Point Menu
- Add Stroke and Point Context Menu
Pull Request: https://projects.blender.org/blender/blender/pulls/114172
