This should ideally be used more in Geometry Nodes to avoid realizing subdiv
on the cpu if it's not really necessary. However, fully supporting it require more changes
in places that actually need the final subdivided mesh.
This also extends the "to string" conversion for `GeometrySet` to include information
about the subdivision level.
Add support for using the Stash (to NLA) and Push Down operators on
empty Actions. In the past years, the NLA has seen stability updates
that ensure strips are at least a single frame long, and with that even
pushing down an empty Action will create a visible (albeit tiny) NLA
strip. There doesn't seem to be a practical reason to disallow this any
more.
Pull Request: https://projects.blender.org/blender/blender/pulls/136604
It is possible to un-assign the action slot from an NLA strip. If then
you enter tweak mode on it and insert keys, a new slot is created on the
Action (so far so good). However, exiting tweak mode did not assign that
slot to the NLA strip, deactivating the animation. This is now solved.
The slot assignment is done when exiting tweak mode because that's
when the whole "sync from assigned Action back to the NLA strip"
happens. Also things like syncing the strip length is done at
tweak-exit, so that seemed like the right place to me to do this too.
Pull Request: https://projects.blender.org/blender/blender/pulls/136601
Update all F-Curves so they have the correct flags (`FCURVE_INT_VALUES`,
`FCURVE_DISCRETE_VALUES`) for the RNA property type that they animate.
The bug that caused these flags to be incorrect (#136347) is already
fixed. This commit ensures that F-Curves that were created while the bug
was in a Blender release are updated to ensure they have the correct
flags.
This is quite important to fix, as otherwise enum properties will
actually be interpolated. Imagine the "fun" when a rig is going
through all the intermediate rotation modes when it was intended to
switch from "Quaternion" to "ZYX".
Even before this commit, these flags were already recomputed on key
insertion (at least the ones through the UI). The versioning code simply
runs this update on all existing F-Curves.
Since this may have some performance impact (doing an RNA path resolve
on all F-Curves on all Actions), the versioning code is only run when
the blend file is from 4.4 or newer, as the bug was introduced in that
release.
Pull Request: https://projects.blender.org/blender/blender/pulls/136512
The Glare node currently has a Maximum Highlights input, which has a
special value of 0.0, where the maximum is implicitly set to infinity,
that is, no suppression of highlights happen at that special value. Such
special values are hard to discover and make sliders non-continuous.
To fix this, we introduce a new panel toggle input called Suppress
Highlights, which the user can enable then control the maximum value.
This also have the advantage that the Maximum value is more clear, since
it is now under a panel more clearly named.
This is now possible since the introduction of boolean sockets and node
panel toggle inputs.
Pull Request: https://projects.blender.org/blender/blender/pulls/136309
Set the flags on the image buffer when loading an EXR file, so they can be
used when saving.
This also removes IB_halffloat and replaces it by the file options flag.
Pull Request: https://projects.blender.org/blender/blender/pulls/135656
I'm moving this for two (related) reasons:
* It depends a lot on the specifics of `Camera` and `Object` data-blocks.
* It links `Object::object_to_world()` which is not an inline function and thus
easily leads to linker errors. It mostly seems like luck that this is not
breaking our build due to early dead code elimination when linking binaries
which use the blenlib static library such as `msgfmt`.
I found this while working on a compilation tool which would not be as lucky and
has a linker error because of the dependence on `Object::object_to_world`.
Pull Request: https://projects.blender.org/blender/blender/pulls/136547
Add support for a 5th modifier key called "hyper",
this is a modifier supported on Wayland & X11 although
other platforms could support an additional modifier too.
Both GNOME and KDE can map CapsLock to Hyper.
Other compositors can use the XKB_DEFAULT_OPTIONS environment variable.
This allows users to have an additional modifier for their own use
that doesn't conflict with other keys.
Ref !136340
Rename to be more consistent with other Blender keymaps, as well as the
naming convention used in "View Type."
- "SequencerCommon" -> "Video Sequence Editor"
- "SequencerPreview" -> "Preview"
- "Sequencer Timeline Tool" -> "Sequencer Tool"
- "Sequencer Preview Tool" -> "Preview Tool"
There is versioning in place to make sure custom keyconfigs keep working.
Once #131102 goes through, if we would like to rename the "Sequencer"
view type to "Timeline" or "Sequencer Timeline," then we can make the
necessary changes here too.
Pull Request: https://projects.blender.org/blender/blender/pulls/136217
Usually we prefer to propogate attributes based on name, even for
conversion between geometry types. Builtin attributes are a common
exception though. The Curve to Points node and the Curve to Mesh node
didn't correctly handle the "custom_normal" attribute, which shouldn't
be propagated. This has only been a problem since custom normals were
converted to a generic attribute on meshes in f9b627d29c.
Pull Request: https://projects.blender.org/blender/blender/pulls/136452
Undefined nodes are currently drawn using a red alert theme color to
make it easier to spot them and replace them. On the other hand, nodes
that are unsupported, that is, nodes whose poll method fail, are not
reported to the user in any way. So this patch also uses the same red
alert color for unsupported nodes.
The node_type_is_undefined function is moved to the draw file since it
seems to be specific to it and not used anywhere else.
Pull Request: https://projects.blender.org/blender/blender/pulls/136451
The group output node is updated as part of the topology cache.
When there are multiple group output nodes the first one with an "active"
flag is picked. However, if no group output is flagged this will leave
the group output unchanged in the cache, even if that node has been deleted.
Always initialize the group output runtime cache to null to avoid invalid
pointers.
Pull Request: https://projects.blender.org/blender/blender/pulls/136436
Newer nodes may not have a fixed `legacy_type`. This was not accounted for
correctly when reading nodes. Such newer nodes are exclusively identified by their idname.
Fortunately, Blender 4.4 was released without any new nodes that don't have
a fixed `legacy_type`. So this does not have to be backported.
Pull Request: https://projects.blender.org/blender/blender/pulls/136431
When using vertex parenting, an option for using the parent object
final evaluated indices is exposed in the Object Properties: Relations
panel. This allows the calculation of the parent vertex position to
ignore the the CD_ORIGINDEX layer and instead use the final indices
that may have been altered by the node tree evaluation.
The indices that will be used for the vertex parenting are also exposed
to the UI in the same panel, allowing them to be altered after the
vertex parent has been created.
Part of #134755 / #134766.
Adds options to the new Import Settings popover (added in 7a6beb65f4)
to toggle collection instancing for dragging in collections. It can be
toggled separately for linking and appending, since it's typical to use
instancing for linking, but not appending (current default, also with
this change).
Previously, toggling collection instancing was only possible via the
Adjust Last Operation panel but this wasn't obvious, many people were
not aware. Adding this option based on feedback by the Blender Studio.
Pull Request: https://projects.blender.org/blender/blender/pulls/135996
The main issue of 'type-less' standard C allocations is that there is no check on
allocated type possible.
This is a serious source of annoyance (and crashes) when making some
low-level structs non-trivial, as tracking down all usages of these
structs in higher-level other structs and their allocation is... really
painful.
MEM_[cm]allocN<T> templates on the other hand do check that the
given type is trivial, at build time (static assert), which makes such issue...
trivial to catch.
NOTE: New code should strive to use MEM_new (i.e. allocation and
construction) as much as possible, even for trivial PoD types.
Pull Request: https://projects.blender.org/blender/blender/pulls/136134
Use the mesh wrapper mechanism from GPU subdivision to get the base mesh.
This can significantly reduce memory usage and render setup time if the
level was not manually set to zero.
Pull Request: https://projects.blender.org/blender/blender/pulls/135895
This makes it possible for Cycles adaptive subdivision to always get the
base mesh, and will enable the same for other external renderers as well.
Metal and Vulkan now support GPU subdivision, so by default the wrapper
will be used most of the time. However this can be disabled in the
preferencesas well. For those cases, the subdiv wrapper is still created
but cached immediately as part of modifier evaluation. This way it can
take advantage of multithreaded depsgraph evaluation, which is not
guaranteed for other cases.
The draw code access the object data through a wrapper that will return
either the base mesh or subdivided mesh depending if GPU subdivision is
enabled or not. Previously Object.data would have the appropriate mesh
already, but now that Cycles may do adaptive subdivision while GPU
subdivision is disabled this is no longer possible.
Pull Request: https://projects.blender.org/blender/blender/pulls/135895
* Fix mesh_copy_data setting the subd wrapper type without copying the
associated tessellated mesh. It's unclear if this currently causes any
issues, but with future changes it would crash.
* Use double checked lock to avoid mutex locks on every call to
BKE_mesh_wrapper_ensure_mdata and BKE_mesh_wrapper_ensure_subdivision.
* Set wrapper type to subd also if subdivision was skipped due to bad
topology or level set to zero. Previous it would do mutex locking and
TBB task isolation on every function call.
* Add assert when BKE_mesh_wrapper_ensure_mdata changes the wrapper type
from subd to mdata. This doesn't really make any sense, it just loses
the subdivision detail. If any code relies on this we need to understand
why and maybe change it.
Pull Request: https://projects.blender.org/blender/blender/pulls/135895
This patch adds a new Image Info node which returns information about
compositor images. The node has three sources:
The node returns the following information:
- Pixel Coordinates: The coordinates of the centers of the pixels in the
image. Those are essentially the integer coordinates with half pixels
offsets added.
- Texture Coordinates: Zero centered pixel coordinates normalized along
the greater dimension. Somewhat analogous to Object coordinates in
shader nodes.
- Resolution: The resolution of the image.
- Location: The location of the image in the virtual compositing space.
- Rotation: The rotation of the image in the virtual compositing space.
- Scale: The scale of the image in the virtual compositing space.
This node is very useful to allow greater flexibility and procedural
creations. For instance, coordinates can be used to create procedural
effects like vignette using very simple math nodes. And size can be used
to compute size-relative parameters for pixel-parameter nodes.
Pull Request: https://projects.blender.org/blender/blender/pulls/135104
This patch adds common nodes that are used in Geometry Nodes and Shader
Nodes to the compositor. The following new nodes were added:
- Vector Math.
- Vector Rotate.
- Vector Mix.
- Value Mix.
- Clamp.
- Float Curve.
- Blackbody.
The follow nodes were replaced by common counterparts:
- Value.
- Color Ramp.
- Mix Color.
- Map Range.
- Math.
- Combine XYZ.
- Separate XYZ.
- Vector Curves.
Some new features were gained in the process:
- Mix Color can now clamp both factor and result.
- Map Range can map different types and interpolations.
- Vector Curves gained a new Factor input.
Some behaviors were changed:
- Map Range previously forcibly clamped values whose magnitude is larger
than the arbitrary value of 10000. This is no longer the case.
Some nodes were removed:
- Map Value. This was Map Range without the maximum 10000 limitation
followed by a Clamp node. Both are now available as nodes.
Some common nodes remain separate:
- Separate/Combine Color. Shader counterpart does not yet support all
color modes, and does not support alpha.
- RGB Curves. Shader variant does not support Film-Like curves or
Black/White balancing.
Texture nodes will also be added soon in a separate patch. Nodes that
were replaced are now deprecated but still exist and will later be
removed in v5.0. Backward compatibility code was introduced to convert
from the deprecated nodes to the new nodes.
Pull Request: https://projects.blender.org/blender/blender/pulls/135300
This used custom data types before, which was misleading and didn't
scale well because the set of attribute types is different than the set
of grid types we can store. Now just use the grid data type, like how
the store named attribute node uses the attribute type.
This covers backward compatibility, but not forward compatibility.
Pull Request: https://projects.blender.org/blender/blender/pulls/135814
The main reason that didn't work before because undefined custom node groups
have the undefined `bNodeType` (and thus are ignored in various places) but are
actually still groups that can be evaluated. The fix is just to handle custom
node groups a bit more explicitly.
In the future, we may want to have a separate "undefined custom group"
`bNodetype`, but that might a be a bit bigger project.
Pull Request: https://projects.blender.org/blender/blender/pulls/135974
Followup to 4499fad40e.
Although no really necessary (the added versioning would be fine to
always run), still bump the subversion to avoid confusion about the
unversioned block.
Implement shortcuts for viewer nodes. Viewer nodes are now activated using the operator `bpy.ops.node.activate_viewer()` instead of activating the viewer by setting the node to active.
This also unifies the behavior with viewer shortcuts in the compositor (see attachment in the original PR).
Pull Request: https://projects.blender.org/blender/blender/pulls/134555
This replaces the deprecated DrawData mechanism by the
usage of the update timestamp `last_update`.
The compositor keeps the `last_update` value of the cached ID
and compares it with the value on the ID at the time of evaluation.
Rel #134690
Pull Request: https://projects.blender.org/blender/blender/pulls/134878
If we tag positions to be changed we get a proper update (was probably
working for poly curves because the evaluated positions just reference
the original positions array when all curves are poly curves).
Pull Request: https://projects.blender.org/blender/blender/pulls/135874
Fix an issue when the NLA is used in conjunction with a directly-
assigned Action.
When the directly-assigned Action is also used in an NLA strip, that
strip would not be evaluated any more. This was even the case when
different slots were used, which entirely muted the strip when there
was no slot directly assigned. Now the "this has been handled already"
logic considers the action and the slot.
Pull Request: https://projects.blender.org/blender/blender/pulls/135911
