The file bmesh_opdefines.c was recently converted to bmesh_opdefines.cc,
but the manual builder was not updated accordingly.
Also, update some comments in the code which were still mentioning the C
version of this file.
Pull Request: https://projects.blender.org/blender/blender/pulls/110532
Implements the rest of #101689, after 5e9ea9243b.
- `vdata` -> `vert_data`
- `edata` -> `edge_data`
- `pdata` -> `face_data`
- `ldata` -> `loop_data`
A deeper rename of `loop` to `corner` will be proposed as a next
step, and renaming `totvert` and `totedge` can be done separately.
Pull Request: https://projects.blender.org/blender/blender/pulls/110432
The cleanup of blenkernel last weeks , caused the house of cards to
collapse on top of bf_gpu's shader_builder, which is off by default
but used on a daily basis by the rendering team.
Given the fixes forward in #110394 ran into a ODR violation in OSL that
was hiding there for years, I don't see another way forward without
impeding the rendering teams productivity for "quite a while" as there
is no guarantee the OSL issue would be the end of it.
the only way forward appears to be back.
this reverts :
19422044eda670b53abe0f541db97cbe516e8c813e88a2f44c4e64b772f59547e7a31707fe6c5a57
The problematic commit was 07fe6c5a57
as blenkernel links most of blender, it's a bit of a link order issue
magnet. Given all these commits stack, it's near impossible to revert
just that one without spending a significant amount of time resolving
merge conflicts. 99% of that work was automated, so easier to just
revert all of them, and re-do the work, than it is to deal with the
merge conflicts.
Pull Request: https://projects.blender.org/blender/blender/pulls/110438
Implements part of #101689.
The "poly" name was chosen to distinguish the `MLoop` + `MPoly`
combination from the `MFace` struct it replaced. Those two structures
persisted together for a long time, but nowadays `MPoly` is gone, and
`MFace` is only used in some legacy code like the particle system.
To avoid unnecessarily using a different term, increase consistency
with the UI and with BMesh, and generally make code a bit easier to
read, this commit replaces the `poly` term with `poly`. Most variables
that use the term are renamed too. `Mesh.totface` and `Mesh.fdata` now
have a `_legacy` suffix to reduce confusion. In a next step, `pdata`
can be renamed to `face_data` as well.
Pull Request: https://projects.blender.org/blender/blender/pulls/109819
It is possible to organize shape keys into a tree through the
reference key setting. Mesh editing and sculpting a reference
key is supposed to update all its children, but this was only
done for one level of dependencies.
This changes the code to retrieve the complete set of dependent
keys and update them all.
Also see #103343.
Couldn't move two files yet:
* `softbody.c`: The corresponding regression test fails. It seems like the
conversion to C++ changes floating point accuracy, but it's not clear where that happens exactly.
* `writeffmpeg.c`: Is a bit more complex to convert because of the static array in `av_err2str`.
Pull Request: https://projects.blender.org/blender/blender/pulls/110182
There's quite a few libraries that depend on dna_type_offsets.h
but had gotten to it by just adding the folder that contains it to
their includes INC section without declaring a dependency to
bf_dna in the LIB section.
which occasionally lead to the lib building before bf_dna and the
header being missing, while this generally gets fixed in CMake by
adding bf_dna to the LIB section of the lib, however until last
week all libraries in the LIB section were linked as INTERFACE so
adding it in there did not resolve the build issue.
To make things still build, we sprinkled add_dependencies wherever
we needed it to force a build order.
This diff :
Declares public include folders for the bf_dna target so there's
no more fudging the INC section required to get to them.
Removes all dna related paths from the INC section for all
libraries.
Adds an alias target bf:dna to signify it has been updated to
modern cmake
Declares a dependency on bf::dna for all libraries that require it
Removes (almost) all calls to add_dependencies for bf_dna
Future work:
Because of the manual dependency management that was done, there is
now some "clutter" with libs depending on bf_dna that realistically
don't. Example bf_intern_opencolorio itself has no dependency on
bf_dna at all, doesn't need it, doesn't use it. However the
dna include folder had been added to it in the past since bf_blenlib
uses dna headers in some of its public headers and
bf_intern_opencolorio does use those blenlib headers.
Given bf_blenlib now correctly declares the dependency on bf_dna
as public bf_intern_opencolorio will get the dna header directory
automatically from CMake, hence some cleanup could be done for
bf_intern_opencolorio
Because 99% of the changes in this diff have been automated, this diff
does not seek to address these issues as there is no easy way to
determine why a certain dependency is in place. A developer will have
to make a pass a this at some later point in time. As I'd rather not
mix automated and manual labour.
There are a few libraries that could not be automatically processed
(ie bf_blendthumb) that also will need this manual look-over.
Pull Request: https://projects.blender.org/blender/blender/pulls/109835
This introduces an alias target `bf::intern::atomic` for
`bf_intern_atomic`. This has the following benefits:
- Any target name with `::` in it will be recognized as an actual
target by cmake, rather than a library name it may not know about.
and will be validated by cmake to exist. Which means if you make
a typo in the LIB section, CMake will error out telling you it
doesn't know about this specific target rather than passing it on
to the build system, where you'll either get build or linker errors
because of said typo.
- Given there is quite a cleanup still to do in the build system,
it won't always be obvious which targets have been updated to
modern targets and which still need to be done. Having a namespaced
target name is a good indicator there.
Pull Request: https://projects.blender.org/blender/blender/pulls/109784
ebe8f8ce71 and 5669c5a61b added multithreading but
a typo meant it wasn't used for half of the process. Fixing that gives a
30% improvement in my tests, from about 80 to 60 ms converting a grid.
This moves the following `editors/*` directories to C++:
- animation, armature, lattice, mesh, metaball, object, scene.
Much of the changes in this commit (inserting casts in particular)
was automated. Further changes like switching to functional style
casts can be done separately by existing automated scripts.
See #103343
Pull Request: https://projects.blender.org/blender/blender/pulls/109715
First we copied the entire BMesh custom data layout to the Mesh, then we
decided not to copy some boolean layers like UV pinning if every value
was false. But that left the layers uninitialized. Instead, copy the
custom data layout _after_ finding which layers to skip.
Replace `typedef struct X {} X;` with `struct X {};`
In some cases the first and last name didn't match although this
is rarely useful, even a typo in some cases, e.g. TrachPathPoint.
Store subdivision surface creases in two new named float attributes:
- `crease_vert`
- `crease_edge`
This is similar to 2a56403cb0.
The attributes are naming conventions, so their data type and domain
aren't enforced, and may be interpolated when necessary. Editing tools
and the subdivision surface modifier use the hard-coded name. It might
be best if these were edited as generic attributes in the future, but
in the meantime using generic attributes helps.
The attributes are visible in the list, which is how they're now meant
to be removed. They are now interchangeable with any tool that works
with the generic attribute system-- even tools like vertex paint can
affect creases now.
This is a breaking change. Forward compatibility isn't preserved for
versions before 3.6, and the `crease` property in RNA is removed in
favor of making a smaller API surface area with just the attribute API.
`Mesh.vertex_creases` and `Mesh.edge_creases` now just return the
matching attribute if possible, and are now implemented in Python.
New functions `*ensure` and `*remove` also replace the operators to
add and remove the layers for Python.
A few extrude node test files have to be updated because of different
(now generic) attribute interpolation behavior.
Pull Request: https://projects.blender.org/blender/blender/pulls/108089
Face maps were added as a prototype of a new rigging solution during
2.8 development. Their storage is redundant with the newer generic
attribute system (specifically with integer face attributes), and
they were never used much. This commit removes the face map list
and converts the storage to an attribute with the name `face_maps`.
There is nowhere to store the face map names anymore, so those
are not kept.
It probably still makes sense to have a feature like mesh face gizmo
selection for rigging. But the design and implementation woulds likely
have to change significantly, including possibly changing the storage
type, and making use of the generic attribute system instead of a
special type.
See #105317 for more discussion.
A lot of files were missing copyright field in the header and
the Blender Foundation contributed to them in a sense of bug
fixing and general maintenance.
This change makes it explicit that those files are at least
partially copyrighted by the Blender Foundation.
Note that this does not make it so the Blender Foundation is
the only holder of the copyright in those files, and developers
who do not have a signed contract with the foundation still
hold the copyright as well.
Another aspect of this change is using SPDX format for the
header. We already used it for the license specification,
and now we state it for the copyright as well, following the
FAQ:
https://reuse.software/faq/
