The main reason that didn't work before because undefined custom node groups
have the undefined `bNodeType` (and thus are ignored in various places) but are
actually still groups that can be evaluated. The fix is just to handle custom
node groups a bit more explicitly.
In the future, we may want to have a separate "undefined custom group"
`bNodetype`, but that might a be a bit bigger project.
Pull Request: https://projects.blender.org/blender/blender/pulls/135974
The main issue of 'type-less' standard C allocations is that there is no check on
allocated type possible.
This is a serious source of annoyance (and crashes) when making some
low-level structs non-trivial, as tracking down all usages of these
structs in higher-level other structs and their allocation is... really
painful.
MEM_[cm]allocN<T> templates on the other hand do check that the
given type is trivial, at build time (static assert), which makes such issue...
trivial to catch.
NOTE: New code should strive to use MEM_new (i.e. allocation and
construction) as much as possible, even for trivial PoD types.
Pull Request: https://projects.blender.org/blender/blender/pulls/135855
The issue was that sometimes the group inputs of a node group were shuffled
around unexpectedly and thus inputs were passed to the wrong sockets.
The `or_socket_usages` function sorts the given span so that the key is more
likely to be reused, reducing the number of nodes inserted in the graph. The
issue was that `build_warning_node` passes `group_output_used_sockets_` into the
function the order of which is important. It thus should not be reordered.
The fix is to just never reorder the span passed to `or_socket_usages` but to
make a local copy instead which can be sorted without problems. Often this copy
is done already anyway when the span is inserted into
`graph_params.socket_usages_combination_cache` as `Vector`.
This fix also makes an assumption about `Map.lookup_or_add_cb` which was not
documented before. Namely it assumes that the key is moved into the map only
after the callback has been called. This behavior is now documented and there is
a unit test for it.
Pull Request: https://projects.blender.org/blender/blender/pulls/135528
The general idea is to keep the 'old', C-style MEM_callocN signature, and slowly
replace most of its usages with the new, C++-style type-safer template version.
* `MEM_cnew<T>` allocation version is renamed to `MEM_callocN<T>`.
* `MEM_cnew_array<T>` allocation version is renamed to `MEM_calloc_arrayN<T>`.
* `MEM_cnew<T>` duplicate version is renamed to `MEM_dupallocN<T>`.
Similar templates type-safe version of `MEM_mallocN` will be added soon
as well.
Following discussions in !134452.
NOTE: For now static type checking in `MEM_callocN` and related are slightly
different for Windows MSVC. This compiler seems to consider structs using the
`DNA_DEFINE_CXX_METHODS` macro as non-trivial (likely because their default
copy constructors are deleted). So using checks on trivially
constructible/destructible instead on this compiler/system.
Pull Request: https://projects.blender.org/blender/blender/pulls/134771
Replace `bNodeInstanceHash` with a `Map`. Move it to the node tree
runtime data. Simplify some code by removing the tag from the hash
value and collecting unused previews directly. Then just remove a
bunch of code that's now unused.
Note that texture node previews haven't been working for a while
anyway, and the experimental shader node previews seem to use
a different system (this one is a remnant of Blender Internal).
Pull Request: https://projects.blender.org/blender/blender/pulls/135310
Adds the option to create a boolean socket that can be used as a panel toggle.
This allows creating simpler and more compact node group UIs when a panel
can be "disabled".
The toggle input is a normal input socket that is just drawn a bit differently in
the UI. Whether a boolean is a toggle input or not does not affect evaluation.
Also see #133936 for guides on how to add and remove panel toggles.
Pull Request: https://projects.blender.org/blender/blender/pulls/133936
Currently, when selecting a file path using the file browser opened from the
node socket, there is no filter active making it harder than necessary to find
the correct file. This patch adds the proper filter. Something similar is done
when using e.g. the gltf import from the menu.
Supporting this requires changes in a bunch of places:
* `StringPropertyRNA` now has a callback that returns the file path pattern.
This has to be a callback, because the same property is used on all file path
sockets, but the valid extension depends on the node.
* The string socket declaration also has the optional path pattern. This can be
set in the node declarations.
Pull Request: https://projects.blender.org/blender/blender/pulls/134931
Previously, the code would assert in `BLI_fopen` when the path is relative.
There are two main options to make the path absolute:
1. Always use the path of the current .blend file as base.
2. Is the path of the .blend file "owns" the current node as base. So when
the Import node is part of a linked node tree, the path of the linked .blend
file is used as base.
Both options are useful depending on the specific use-case, but the latter
seems more consistent with other places in Blender. For more advanced
functionality, we might need nodes that give the current .blend file path
and one node to join paths.
Pull Request: https://projects.blender.org/blender/blender/pulls/134794
Restriction of the nodes api to clearly define never-null function arguments.
Side effects: some assertions and null-check (with early return) were removed.
On the caller side is ensured to never derefer null to pass argument (mainly in RNA).
In addition, one pointer argument now actually a return type.
By-reference return types instead of pointers going to be separate kind of
change since also imply of cleaning up variables created from reference.
Also good future improvement would be to mark a copy-constructor as
explicit for DNA node types.
Pull Request: https://projects.blender.org/blender/blender/pulls/134627
Collapsing curves to a single point when just resampling is unexpected. This
patch changes it so that non-zero-length curves keep at least one segment.
The fix is fairly straight forward, but a bunch of additional code is added to
support the legacy option to avoid breaking backward compatibility.
Pull Request: https://projects.blender.org/blender/blender/pulls/133659
In setups where only very few elements are processed at once, the lazy-threading
hints that come from `parallel_for` are not triggered. However, often it can
still be worth to use multi-threading in such cases. Therefore, we need to find
additional places where the lazy-threading hints are sent. There are many
possibilities and we probably have to add them step by step as we find .blend
files that show missing multi-threading.
In this patch I choose to send the hint at the beginning of evaluating a repeat
zone if it has 10 or more iterations. The exact number here is just a guess and
could be fine tuned over time if necessary.
A slightly modified version of the file in #134230 speeds up from ~1100ms to
~100ms with this change. The exact speedup changes quite a bit each run, but is
always between 5 and 20x, so it's quite noticable.
Pull Request: https://projects.blender.org/blender/blender/pulls/134408
Move `Library.runtime` to be a pointer, move the related
`LibraryRuntime` struct to `BKE_library.hh`. Similar to e.g.
Mesh.runtime, that pointer is expected to always be valid, and is
allocated at readtime or when creating a new Library ID.
Related smaller changes:
* Write code now uses standard ID writing codepath for Library IDs too.
* Runtime pointer is reset to nullptr before writing.
* Looking up a library by its absolute path is now handled through a
dedicated utils, `search_filepath_abs`, instead of using
`BLI_findstring`.
Pull Request: https://projects.blender.org/blender/blender/pulls/134188
Currently UI code always has to use char pointers when interacting with
the translation system. This makes benefiting from the use C++ strings
and StringRef more difficult. That means we're leaving some type safety
and performance on the table. This PR adds StringRef overloads to the
translation API functions and removes the few calls to `.c_str()` that
are now unnecessary.
Pull Request: https://projects.blender.org/blender/blender/pulls/133887
The issue was that the code did not handle input sockets that are fields
implicitly correctly. It just retrieved a single from them, instead of
treating them as having an unknown value.
The new Object and Collection constant geometry nodes do not register their dependency on their targets.
This causes the graph not to update properly when they are modified.
Pull Request: https://projects.blender.org/blender/blender/pulls/133784
The File Output node sometime ignores the transformations of their
inputs. That's due to the fact that transforms are now delayed and the
File Output node does not realize its inputs on its domain in case it
was not multi-layer.
To fix this, add another realization mode for transforms only. And use
that in the File Output node, as well as the Bokeh Blur, UV Map, and
Plane Track Deform, which also need this fix.
Pull Request: https://projects.blender.org/blender/blender/pulls/133850
Previously, there was a `StringRef.copy` method which would copy the string into
the given buffer. However, it was not defined for the case when the buffer was
too small. It moved the responsibility of making sure the buffer is large enough
to the caller.
Unfortunately, in practice that easily hides bugs in builds without asserts
which don't come up in testing much. Now, the method is replaced with
`StringRef.copy_utf8_truncated` which has much more well defined semantics and
also makes sure that the string remains valid utf-8.
This also renames `unsafe_copy` to `copy_unsafe` to make the naming more similar
to `copy_utf8_truncated`.
Pull Request: https://projects.blender.org/blender/blender/pulls/133677
The issue is that the localized node tree has an invalid type if the linked file
is not available. So we essentially ended up with a geometry node group that
contains a group node that points to a non-geometry nodes group.
Pull Request: https://projects.blender.org/blender/blender/pulls/133650
This builds on top of 80441190c6 to gray output
unused inputs of the Mix and Mix Shader node. These nodes have unused inputs if
their mix factor is 0 or 1 (+ some special cases for non-uniform vector mixing
and blend modes).
Pull Request: https://projects.blender.org/blender/blender/pulls/133369
This patch automatically grays out input values which can't affect the output
currently. It works with inputs of group nodes, geometry nodes modifiers and
node tools.
To achieve this, it analyses the node tree and partially evaluates it to figure
out which group inputs are currently not linked to an output or are disabled by e.g.
some switch node.
Original proposal: https://devtalk.blender.org/t/dynamic-socket-visibility/31874
Related info in blog post:
https://code.blender.org/2023/11/geometry-nodes-workshop-november-2023/#dynamic-socket-visibility
Follow up task for designing a UI that allows hiding sockets: #132706
Limitations:
* The inferencing does not update correctly when a socket starts being
animated/driven. I haven't found a good way to invalidate the cache in a good
way reliably yet. It's only a very short term problem though. It fixes itself
after the next modification of the node tree and is only noticeable when
animating some specific sockets such as the switch node condition.
* Whether a socket is grayed out is not exposed in the Python API yet. That will
be done separately.
* Only a partial evaluation is done to determine if an input affects an output.
There should be no cases where a socket is found to be unused when it can actually
affect the output. However, there can be cases where a socket is inferenced to be used
even if it is not due to some complex condition. Depending on the exact circumstances,
this can either be improved or the condition in the node tree should be simplified.
Pull Request: https://projects.blender.org/blender/blender/pulls/132219
This uses the following accessor methods in more places in more places:
`is_group()`, `is_group_input()`, `is_group_output()`, `is_muted()`,
`is_frame()` and `is_reroute()`.
This results in simpler code and reduces the use of `bNode.type_legacy`.
Pull Request: https://projects.blender.org/blender/blender/pulls/132899
Main goals of this refactor:
* Make it more obvious which update function should be used.
* Make it more obvious which parameters are required by using references instead
of pointers.
* Support passing in multiple modified trees instead of just a single one.
No functional changes are expected.
Pull Request: https://projects.blender.org/blender/blender/pulls/132862
