The main goal here is to rename things in a way that makes sense for
simulation baking, but also for the upcoming bake node.
This also removes some versioning code from 3.6 which initialized the
default bake path. Baked data from back then can't be loaded anymore
anyway, and the way the default path is generated is different now as well.
Pull Request: https://projects.blender.org/blender/blender/pulls/111845
Blob stands for "binary large object" and is a known term. I used to use the term `bdata`
to mean "binary data", mainly because I didn't think of a better name. Blob is a much
better name as it captures the intend of those files much better.
This change breaks existing bakes, because I rename the folder from `bdata` to `blobs`.
I think that is ok, because I also just broke bakes two days ago in a larger refactor
(e92c59bc9b).
Pull Request: https://projects.blender.org/blender/blender/pulls/111822
`BKE_simulation_state_serialize.hh` is not necessary anymore,
because the serialization is done at a lower level.
The functionality that lived there in the past is now part of
`BKE_bake_items_serialize.hh`.
Goals of the refactor:
* Internal support for baking individual simulation zones (not exposed in the UI yet).
* More well-defined access to simulation data in geometry nodes. Especially, it
should be more obvious where data is modified. A similar approach should also
work for the Bake node.
Previously, there were a bunch of simulation specific properties in `GeoNodesModifierData`
and then the simulation input and output nodes would have to figure out what to do with that
data. Now, there is a new `GeoNodesSimulationParams` which controls the behavior of
simulation zones. Contrary to before, different simulation zones can now be handled
independently, even if that is not really used yet. `GeoNodesSimulationParams` has to be
subclassed by a user of the geometry nodes API. The subclass controls what each simulation
input and output node does. This some of the logic that was part of the node before, into
the modifier.
The way we store simulation data is "transposed". Previously, we stored zone data per
frame, but now we store frame data per zone. This allows different zones to be more
independent. Consequently, the way the simulation cache is accessed changed. I kept
things simpler for now, avoiding many of the methods we had before, and directly
accessing the data more often which is often simple enough. This change also makes
it theoretically possible to store baked data for separate zones independently.
A downside of this is, that existing baked data can't be read anymore. We don't really
have compatibility guarantees for this format yet, so it's ok. Users will have to bake again.
The bake folder for the modifier now contains an extra subfolder for every zone.
Drawing the cached/baked frames in the timeline is less straight forward now. Currently,
it just draws the state of one of the zones, which usually is identical to that of all other
zones. This will change in the future though, and then the timeline drawing also needs
some new UI work.
Pull Request: https://projects.blender.org/blender/blender/pulls/111623
Part 3/3 of #109135, #110272
Switch to new node group interfaces and deprecate old DNA and API.
This completes support for panels in node drawing and in node group
interface declarations in particular.
The new node group interface DNA and RNA code has been added in parts
1 and 2 (#110885, #110952) but has not be enabled yet. This commit
completes the integration by
* enabling the new RNA API
* using the new API in UI
* read/write new interfaces from blend files
* add versioning for backward compatibility
* add forward-compatible writing code to reconstruct old interfaces
All places accessing node group interface declarations should now be
using the new API. A runtime cache has been added that allows simple
linear access to socket inputs and outputs even when a panel hierarchy
is used.
Old DNA has been deprecated and should only be accessed for versioning
(inputs/outputs renamed to inputs_legacy/outputs_legacy to catch
errors). Versioning code ensures both backward and forward
compatibility of existing files.
The API for old interfaces is removed. The new API is very similar but
is defined on the `ntree.interface` instead of the `ntree` directly.
Breaking change notifications and detailed instructions for migrating
will be added.
A python test has been added for the node group API functions. This
includes new functionality such as creating panels and moving items
between different levels.
This patch does not yet contain panel representations in the modifier
UI. This has been tested in a separate branch and will be added with a
later PR (#108565).
Pull Request: https://projects.blender.org/blender/blender/pulls/111348
Including <iostream> or similar headers is quite expensive, since it
also pulls in things like <locale> and so on. In many BLI headers,
iostreams are only used to implement some sort of "debug print",
or an operator<< for ostream.
Change some of the commonly used places to instead include <iosfwd>,
which is the standard way of forward-declaring iostreams related
classes, and move the actual debug-print / operator<< implementations
into .cc files.
This is not done for templated classes though (it would be possible
to provide explicit operator<< instantiations somewhere in the
source file, but that would lead to hard-to-figure-out linker error
whenever someone would add a different template type). There, where
possible, I changed from full <iostream> include to only the needed
<ostream> part.
For Span<T>, I just removed print_as_lines since it's not used by
anything. It could be moved into a .cc file using a similar approach
as above if needed.
Doing full blender build changes include counts this way:
- <iostream> 1986 -> 978
- <sstream> 2880 -> 925
It does not affect the total build time much though, mostly because
towards the end of it there's just several CPU cores finishing
compiling OpenVDB related source files.
Pull Request: https://projects.blender.org/blender/blender/pulls/111046
Listing the "Blender Foundation" as copyright holder implied the Blender
Foundation holds copyright to files which may include work from many
developers.
While keeping copyright on headers makes sense for isolated libraries,
Blender's own code may be refactored or moved between files in a way
that makes the per file copyright holders less meaningful.
Copyright references to the "Blender Foundation" have been replaced with
"Blender Authors", with the exception of `./extern/` since these this
contains libraries which are more isolated, any changed to license
headers there can be handled on a case-by-case basis.
Some directories in `./intern/` have also been excluded:
- `./intern/cycles/` it's own `AUTHORS` file is planned.
- `./intern/opensubdiv/`.
An "AUTHORS" file has been added, using the chromium projects authors
file as a template.
Design task: #110784
Ref !110783.
The simulation used to reset when the previously computed frame is the
same as the current one. However, in this case the output should just be
the same as in the previous computation.
Pull Request: https://projects.blender.org/blender/blender/pulls/110799
Show node group inputs in the redo panel, including the
"use attribute" toggle. There are a few limitations that will
be solved separately:
- The redo panel is _always_ drawn, there is no way to show it conditionally yet
- There is no way to add the operator name to the redo panel title yet
- Attribute search is still missing for attribute inputs
Pull Request: https://projects.blender.org/blender/blender/pulls/109975
Remove the "_for_read" suffix from methods to get geometry and geometry
components. That should be considered the default, so the suffix just
adds unnecessary text. This is consistent with the attribute API and
various implicit sharing data access methods.
Use "from_mesh" instead of "create_with_mesh". This is consistent with
the recently used naming for the `IndexMask` API.
Pull Request: https://projects.blender.org/blender/blender/pulls/110738
Previously the panel type name of a modifier (e.g. "MOD_PT_Smooth") was
created by copying from the ModifierTypeInfos name.
This meant that modifiers with the same default name would use
the same identifier for the panels.
Since different object types (e.g. OB_GREASE_PENCIL and OB_MESH)
might want to use the same default modifier name, this PR introduces
an idname field in the ModifierTypeInfo struct. This is then used to
generate the panel type name.
For compatibility reasons, the idname is the same as the name for now.
Note: Because the name was used previously, this means that some
modifiers have spaces in their panel type name.
E.g. "MOD_PT_Volume to Mesh".
Pull Request: https://projects.blender.org/blender/blender/pulls/110468
Implements the rest of #101689, after 5e9ea9243b.
- `vdata` -> `vert_data`
- `edata` -> `edge_data`
- `pdata` -> `face_data`
- `ldata` -> `loop_data`
A deeper rename of `loop` to `corner` will be proposed as a next
step, and renaming `totvert` and `totedge` can be done separately.
Pull Request: https://projects.blender.org/blender/blender/pulls/110432
Implements part of #101689.
The "poly" name was chosen to distinguish the `MLoop` + `MPoly`
combination from the `MFace` struct it replaced. Those two structures
persisted together for a long time, but nowadays `MPoly` is gone, and
`MFace` is only used in some legacy code like the particle system.
To avoid unnecessarily using a different term, increase consistency
with the UI and with BMesh, and generally make code a bit easier to
read, this commit replaces the `poly` term with `poly`. Most variables
that use the term are renamed too. `Mesh.totface` and `Mesh.fdata` now
have a `_legacy` suffix to reduce confusion. In a next step, `pdata`
can be renamed to `face_data` as well.
Pull Request: https://projects.blender.org/blender/blender/pulls/109819
This adds support for running a set of nodes repeatedly. The number
of iterations can be controlled dynamically as an input of the repeat
zone. The repeat zone can be added in via the search or from the
Add > Utilities menu.
The main use case is to replace long repetitive node chains with a more
flexible alternative. Technically, repeat zones can also be used for
many other use cases. However, due to their serial nature, performance
is very sub-optimal when they are used to solve problems that could
be processed in parallel. Better solutions for such use cases will
be worked on separately.
Repeat zones are similar to simulation zones. The major difference is
that they have no concept of time and are always evaluated entirely in
the current frame, while in simulations only a single iteration is
evaluated per frame.
Stopping the repetition early using a dynamic condition is not yet
supported. "Break" functionality can be implemented manually using
Switch nodes in the loop for now. It's likely that this functionality
will be built into the repeat zone in the future.
For now, things are kept more simple.
Remaining Todos after this first version:
* Improve socket inspection and viewer node support. Currently, only
the first iteration is taken into account for socket inspection
and the viewer.
* Make loop evaluation more lazy. Currently, the evaluation is eager,
meaning that it evaluates some nodes even though their output may not
be required.
Pull Request: https://projects.blender.org/blender/blender/pulls/109164
This data-block was originally added in eb4e3bbe68.
However, that original plan wasn't fully implemented, with simulations
now integrated with geometry nodes and modifiers instead of a separate
data-block. We kept the data-block around anyway since we have the
loose plan of using a similar data-block to make global simulations
connected between multiple objects. But it may be a while before we
implement that, and in the meantime having this just causes confusion.
When we don't need to preserve a persistent cache, we can use
the geometry from the last frame directly rather than copying it.
Though implicit lets us avoid copying large data arrays when they
aren't changed, this can still give a large improvement for something
like particle simulation where the majority of the data was copied
every frame.
Pull Request: https://projects.blender.org/blender/blender/pulls/109742
The "No Cache" simulation nodes option effectively changes the cache
to work in a "realtime mode" where there are only two states, the
current and previous frame. Whenever the current frame doesn't
increase, the previous state should reset. This didn't happen
properly, and it was hard to verify because the code was shared
with the regular "cache on" mode.
Instead, separate the caching more in the code, using a different
struct to store the two "realtime" states. Also clarify that we
don't support animation of the "No Cache" option by disabling
support for that in RNA.
Pull Request: https://projects.blender.org/blender/blender/pulls/109741
The simulation state used by simulation nodes is owned by the modifier. Since a
geometry nodes setup can contain an arbitrary number of simulations, the modifier
has a mapping from `SimulationZoneID` to `SimulationZoneState`. This patch changes
what is used as `SimulationZoneID`.
Previously, the `SimulationZoneID` contained a list of `bNode::identifier` that described
the path from the root node tree to the simulation output node. This works ok in many
cases, but also has a significant problem: The `SimulationZoneID` changes when moving
the simulation zone into or out of a node group. This implies that any of these operations
loses the mapping from zone to simulation state, invalidating the cache or even baked data.
The goal of this patch is to introduce a single-integer ID that identifies a (nested) simulation
zone and is stable even when grouping and un-grouping. The ID should be stable even if the
node group containing the (nested) simulation zone is in a separate linked .blend file and
that linked file is changed.
In the future, the same kind of ID can be used to store e.g. checkpoint/baked/frozen data
in the modifier.
To achieve the described goal, node trees can now store an arbitrary number of nested node
references (an array of `bNestedNodeRef`). Each nested node reference has an ID that is
unique within the current node tree. The node tree does not store the entire path to the
nested node. Instead it only know which group node the nested node is in, and what the
nested node ID of the node is within that group. Grouping and un-grouping operations
have to update the nested node references to keep the IDs stable. Importantly though,
these operations only have to care about the two node groups that are affected. IDs in
higher level node groups remain unchanged by design.
A consequence of this design is that every `bNodeTree` now has a `bNestedNodeRef`
for every (nested) simulation zone. Two instances of the same simulation zone (because
a node group is reused) are referenced by two separate `bNestedNodeRef`. This is
important to keep in mind, because it also means that this solution doesn't scale well if
we wanted to use it to keep stable references to *all* nested nodes. I can't think of a
solution that fulfills the described requirements but scales better with more nodes. For
that reason, this solution should only be used when we want to store data for each
referenced nested node at the top level (like we do for simulations).
This is not a replacement for `ViewerPath` which can store a path to data in a node tree
without changing the node tree. Also `ViewerPath` can contain information like the loop
iteration that should be viewed (#109164). `bNestedNodeRef` can't differentiate between
different iterations of a loop. This also means that simulations can't be used inside of a
loop (loops inside of a simulation work fine though).
When baking, the new stable ID is now written to disk, which means that baked data is
not invalidated by grouping/un-grouping operations. Backward compatibility for baked
data is provided, but only works as long as the simulation zone has not been moved to
a different node group yet. Forward compatibility for the baked data is not provided
(so older versions can't load the data baked with a newer version of Blender).
Pull Request: https://projects.blender.org/blender/blender/pulls/109444
This refactors how a geometry nodes node tree is converted to a lazy-function
graph. Previously, all nodes were inserted into a single graph. This was fine
because every node was evaluated at most once per node group evaluation.
However, loops (#108896) break this assumption since now nodes may be
evaluated multiple times and thus a single flat graph does not work anymore.
Now, a separate lazy-function is build for every zone which gives us much
more flexibility for what can happen in a zone. Right now, the change only
applies to simulation zones since that's the only kind of zone we have.
Technically, those zones could be inlined, but turning them into a separate
lazy-function also does not hurt and makes it possible to test this refactor
without implementing loops first. Also, having them as separate functions
might help in the future if we integrate a substep loop directly into the
simulation zone.
The most tricky part here is to just link everything up correctly, especially
with respect to deterministic anonymous attribute lifetimes. Fortunately,
correctness can be checked visually by looking at the generated graphs.
The logging/viewer system also had to be refactored a bit, because now there
can be multiple different `ComputeContext` in a single node tree. Each zone
is in a separate `ComputeContext`. To make it work, the `ViewerPath` system
now explicitly supports zones and drawing code will look up the right logger
for showing inspection data.
No functional changes are expected, except that the spreadsheet now shows
"Simulation Zone" in the context path if the viewer is in a simulation.
Move `GeometrySet` and `GeometryComponent` and subclasses
to the `blender::bke` namespace. This wasn't done earlier since
these were one of the first C++ classes used throughout Blender,
but now it is common.
Also remove the now-unnecessary C-header, since all users of
the geometry set header are now in C++.
Pull Request: https://projects.blender.org/blender/blender/pulls/109020
Duplicating will otherwise keep the same bake directory, which causes
a path conflict and requires manual fixing by users. Clearing the path
on copy makes it so the default path is generated on baking.
This does not change the path when doing internal copies, like
- Depsgraph "evaluated" object vs "original"
- Appending or linking objects
- Making a linked object local
Pull Request: https://projects.blender.org/blender/blender/pulls/109014
Sometimes the modifier has never been evaluated by an active depsgraph
before it is used for rendering. In this case, the baked data was never
loaded. Now also allow checking for baked data in a non-active depsgraph.
The locking that is in-place already should probably already be enough
to make this thread-safe but maybe that could be made more explicit.
With this the simulation cache pointer is copied over to the evaluated modifier.
This allows the original modifier to be removed without breaking the evaluated
modifier, which results in better decoupling. This can avoid issues when a
non-active depsgraph is evaluated in the background while the user is manipulating
the scene.
Also, it is now assumed that the simulation cache is always allocated even if
there is no simulation (similar to run-time data). This simplifies the code.
Pull Request: https://projects.blender.org/blender/blender/pulls/108976
For node group operators (#101778), it helps to reuse the existing
geometry nodes execution. This commit adds a new moves most
of the geometry computation to the nodes module and gives the
modifier (and in the future the operator) a callback to setup the
execution context.
Pull Request: https://projects.blender.org/blender/blender/pulls/108482
A lot of files were missing copyright field in the header and
the Blender Foundation contributed to them in a sense of bug
fixing and general maintenance.
This change makes it explicit that those files are at least
partially copyrighted by the Blender Foundation.
Note that this does not make it so the Blender Foundation is
the only holder of the copyright in those files, and developers
who do not have a signed contract with the foundation still
hold the copyright as well.
Another aspect of this change is using SPDX format for the
header. We already used it for the license specification,
and now we state it for the copyright as well, following the
FAQ:
https://reuse.software/faq/
