Previously, when a socket was detected to be unused, it was just grayed out.
This patch adds support for automatically hiding unused sockets based on this
convention: Menu inputs control visibility while other inputs only control
whether something is grayed out.
More specifically, an input is visible if any of these conditions is met:
* It affects the output currently.
* It never affects the output. In this case its usage does not depend on any
menu input.
* It is used if all non-menu inputs are considered to be unknown.
In the future, we could support customizing which inputs are allowed to control
visibility. For now it's good to use the convention that Blender generally
follows itself.
As before, panels are grayed out if they only contain grayed out sockets and
panels are hidden when they don't contain any visible sockets.
Hiding inputs works in group nodes, the Geometry Nodes modifier and node
operators. In theory it will work for all node tree types, but since only
Geometry Nodes supports the Menu Switch node currently, this patch currently
only makes a difference there.
The implementation reuses the existing `SocketUsageInferencer` with a different
sets of inputs. So no new core-inferencing logic was needed.
Design task: #132706.
Pull Request: https://projects.blender.org/blender/blender/pulls/138186
When a new node tree becomes active based on the context, the node editor was
not centered on the new tree. This can easily lead to the situation where there
is no node visible, and the user first has to search for the nodes.
The reason for this is unexpectedly special:
* `snode_set_context` calls `ED_node_tree_start` which adds the `NC_SCENE |
ND_NODES` notifier.
* Typically, this would update the `View2D` of the region in
`node_area_listener`.
* However, `snode_set_context` is called from
`wm_event_do_refresh_wm_and_depsgraph` which happens after(!) the listeners
run. Therefore, the node editor is redrawn before the listener is handled.
* During redraw, the stored view center is overridden. When it is later used in
the listener, the value is lost already.
This patch solves this by updating the view center eagerly when opening changing
what node tree is visible, instead of trying to it lazily where the required
information might be lost already.
Pull Request: https://projects.blender.org/blender/blender/pulls/138389
It's safer to pass a type so that it can be checked if delete should be
used instead. Also changes a few void pointer casts to const_cast so that
if the data becomes typed it's an error.
Pull Request: https://projects.blender.org/blender/blender/pulls/137404
Callbacks: exec invoke & modal now use a typed enum wmOperatorStatus.
This helps avoid mistakes returning incompatible booleans or other
values which don't make sense for operators to return.
It also makes it more obvious functions in the WM API are intended
to be used to calculate return values for operator callbacks.
Operator enums have been moved into DNA_windowmanager_enums.h
so this can be used in other headers without loading other includes
indirectly.
No functional changes expected.
Ref !136227
Caused by 4bf34d9591.
Nodes within frames were ignored because previously their location was
relative to the frame, so moving both the frame and the node would cause
"double" movement. Now each node location is independent.
Restriction of the nodes api to clearly define never-null function arguments.
Side effects: some assertions and null-check (with early return) were removed.
On the caller side is ensured to never derefer null to pass argument (mainly in RNA).
In addition, one pointer argument now actually a return type.
By-reference return types instead of pointers going to be separate kind of
change since also imply of cleaning up variables created from reference.
Also good future improvement would be to mark a copy-constructor as
explicit for DNA node types.
Pull Request: https://projects.blender.org/blender/blender/pulls/134627
Move `Library.runtime` to be a pointer, move the related
`LibraryRuntime` struct to `BKE_library.hh`. Similar to e.g.
Mesh.runtime, that pointer is expected to always be valid, and is
allocated at readtime or when creating a new Library ID.
Related smaller changes:
* Write code now uses standard ID writing codepath for Library IDs too.
* Runtime pointer is reset to nullptr before writing.
* Looking up a library by its absolute path is now handled through a
dedicated utils, `search_filepath_abs`, instead of using
`BLI_findstring`.
Pull Request: https://projects.blender.org/blender/blender/pulls/134188
This uses the following accessor methods in more places in more places:
`is_group()`, `is_group_input()`, `is_group_output()`, `is_muted()`,
`is_frame()` and `is_reroute()`.
This results in simpler code and reduces the use of `bNode.type_legacy`.
Pull Request: https://projects.blender.org/blender/blender/pulls/132899
`BKE_main_ensure_invariants` was added in 1fae5fd8f6. The older
`ED_node_tree_propagate_change` was already implemented as a thin wrapper around
`BKE_main_ensure_invariants`. This patch removes the wrapper and calls the more
general function directly.
A new overload of `BKE_main_ensure_invariants` is added for the common case when
only a single data-block has been modified.
Pull Request: https://projects.blender.org/blender/blender/pulls/133048
Main goals of this refactor:
* Make it more obvious which update function should be used.
* Make it more obvious which parameters are required by using references instead
of pointers.
* Support passing in multiple modified trees instead of just a single one.
No functional changes are expected.
Pull Request: https://projects.blender.org/blender/blender/pulls/132862
The new description for `bNode.type_legacy`:
```
/**
* Legacy integer type for nodes. It does not uniquely identify a node type, only the `idname`
* does that. For example, all custom nodes use #NODE_CUSTOM but do have different idnames.
* This is mainly kept for compatibility reasons.
*
* Currently, this type is also used in many parts of Blender, but that should slowly be phased
* out by either relying on idnames, accessor methods like `node.is_reroute()`.
*
* A main benefit of this integer type over using idnames currently is that integer comparison is
* much cheaper than string comparison, especially if many idnames have the same prefix (e.g.
* "GeometryNode"). Eventually, we could introduce cheap-to-compare runtime identifier for node
* types. That could mean e.g. using `ustring` for idnames (where string comparison is just
* pointer comparison), or using a run-time generated integer that is automatically assigned when
* node types are registered.
*/
```
Pull Request: https://projects.blender.org/blender/blender/pulls/132858
The part that used the context does not seem to be necessary anymore. If the
given tree has any update tag set, the same notifiers will be sent anyway by the
`tree_changed_fn` callback.
If it turns out that we are now missing some notifier, then we have to change
the caller. It either has to call the proper `BKE_ntree_update_tag_*` function,
or create the notifier directly.
This change helps to generalize the concept of propagating changes in original
data, because the context is rarely available.
Pull Request: https://projects.blender.org/blender/blender/pulls/132810
Make the type structs non-trivial, use new and delete for allocation and
freeing, and use std::string for most strings they contain. Also use
StringRef instead of char pointers in a few places. Mainly this improves
ergonomics when working with the strings.
Pull Request: https://projects.blender.org/blender/blender/pulls/132750
Currently each node's position is stored in the coordinate space of
its parent. To find the location of a node on the canvas, we have to
apply the translation of each of its parents. Also, nodes have hidden
"offset" values used while transforming frame nodes. Together,
those made the system much more complicated than necessary,
and they made the Python API ineffective.
This commit removes usage of the offset values and moves nodes
to be stored in the "global" space of the node canvas. It also resolves
some weird behavior when resizing frame nodes, and fixes a few bugs.
The change is forward compatible, so we still write files with nodes in
the old parent-space format. In 5.0 the conversion when writing can be
removed. The existing Python API also stays the same. A new
"location_absolute" property gives node locations in global space,
and changing the old property also moves the child nodes of frames.
Resolves#92458, #72904.
Pull Request: https://projects.blender.org/blender/blender/pulls/131335
- Gives O(1) access to string length in more cases
- Convenient string manipulation functions
- Clarify difference between "no string" and "empty string"
- Avoid the need for raw pointers in the API
- Shows which API string arguments are optional
Pull Request: https://projects.blender.org/blender/blender/pulls/131473
When assigning an Action with the new API:
- check the Actions ID type (if it is a legacy Action), and
- check whether the ID is in NLA tweak mode.
This means that action assignment can fail, so the
`animrig::assign_action()` and `animrig::unassign_action()` functions
now return a `[[nodiscard]] bool`.
Part of `generic_assign_action()` has now also been shielded with an
`#ifdef WITH_ANIM_BAKLAVA` just to be sure.
This also includes a change in `BKE_animdata_free()`. That function now
first exits NLA tweak mode (if enabled) before freeing the Actions. This
makes it possible to simply un-assign the assigned Action, as all the
NLA tweakmode stuff has already been taken care of by the responsible
function.
Pull Request: https://projects.blender.org/blender/blender/pulls/128199
Instead of assigning Actions by direct pointer manipulation (and the
corresponding juggling of user counts), call `animrig::assign_action()`
and `animrig::unassign_action()`.
These functions not only correctly handle user counts, but also ensure
that slot assignments & user tracking works. The former always happens,
the latter only when building with experimental features enabled.
Because (un)assigning slotted Actions need the animated ID (instead of
just the `AnimData *`), more functions now require an `OwnedAnimData`.
Note that there is still some user count juggling. This is caused by
`BKE_id_new()`, and by extension `BKE_action_add`, returning an ID with
user count = 1, even though that ID is not yet used. A todo task #128017
has been made to change `BKE_action_add()` so that the Action it returns
can be directly fed into `animrig::assign_action()`.
This PR updates the following areas:
- Creating a node group by grouping animated nodes, as this has to move
the animation data. This PR just handles the assignment of a new
Action.
- Temporary Action creation for ungrouping node groups.
- Versioning of pre-2.5 animation data.
No functional changes.
Ref: #123424
Pull Request: https://projects.blender.org/blender/blender/pulls/128026
Use snake style naming for all the kernel nodes functions.
Omit kernel prefix in the names since of the using namespace.
Use full forms of the terms
('iter' -> 'iterator', 'ntree' -> 'node_tree', 'rem' -> 'remove', ...).
Pull Request: https://projects.blender.org/blender/blender/pulls/126416
This operator sets the new default group node width (from e842966c5e) based on
the parent group node. This makes it easier to initialize the value. Without
this, one had to create and delete the group node potentially many times to find
a good default width.
Pull Request: https://projects.blender.org/blender/blender/pulls/126239
This commit moves generated `RNA_blender.h`, `RNA_prototype.h` and
`RNA_blender_cpp.h` headers to become C++ header files.
It also removes the now useless `RNA_EXTERN_C` defines, and just
directly use the `extern` keyword. We do not need anymore `extern "C"`
declarations here.
Pull Request: https://projects.blender.org/blender/blender/pulls/124469
This adds support for attaching gizmos for input values. The goal is to make it
easier for users to set input values intuitively in the 3D viewport.
We went through multiple different possible designs until we settled on the one
implemented here. We picked it for it's flexibility and ease of use when using
geometry node assets. The core principle in the design is that **gizmos are
attached to existing input values instead of being the input value themselves**.
This actually fits the existing concept of gizmos in Blender well, but may be a
bit unintutitive in a node setup at first. The attachment is done using links in
the node editor.
The most basic usage of the node is to link a Value node to the new Linear Gizmo
node. This attaches the gizmo to the input value and allows you to change it
from the 3D view. The attachment is indicated by the gizmo icon in the sockets
which are controlled by a gizmo as well as the back-link (notice the double
link) when the gizmo is active.
The core principle makes it straight forward to control the same node setup from
the 3D view with gizmos, or by manually changing input values, or by driving the
input values procedurally.
If the input value is controlled indirectly by other inputs, it's often possible
to **automatically propagate** the gizmo to the actual input.
Backpropagation does not work for all nodes, although more nodes can be
supported over time.
This patch adds the first three gizmo nodes which cover common use cases:
* **Linear Gizmo**: Creates a gizmo that controls a float or integer value using
a linear movement of e.g. an arrow in the 3D viewport.
* **Dial Gizmo**: Creates a circular gizmo in the 3D viewport that can be
rotated to change the attached angle input.
* **Transform Gizmo**: Creates a simple gizmo for location, rotation and scale.
In the future, more built-in gizmos and potentially the ability for custom
gizmos could be added.
All gizmo nodes have a **Transform** geometry output. Using it is optional but
it is recommended when the gizmo is used to control inputs that affect a
geometry. When it is used, Blender will automatically transform the gizmos
together with the geometry that they control. To achieve this, the output should
be merged with the generated geometry using the *Join Geometry* node. The data
contained in *Transform* output is not visible geometry, but just internal
information that helps Blender to give a better user experience when using
gizmos.
The gizmo nodes have a multi-input socket. This allows **controlling multiple
values** with the same gizmo.
Only a small set of **gizmo shapes** is supported initially. It might be
extended in the future but one goal is to give the gizmos used by different node
group assets a familiar look and feel. A similar constraint exists for
**colors**. Currently, one can choose from a fixed set of colors which can be
modified in the theme settings.
The set of **visible gizmos** is determined by a multiple factors because it's
not really feasible to show all possible gizmos at all times. To see any of the
geometry nodes gizmos, the "Active Modifier" option has to be enabled in the
"Viewport Gizmos" popover. Then all gizmos are drawn for which at least one of
the following is true:
* The gizmo controls an input of the active modifier of the active object.
* The gizmo controls a value in a selected node in an open node editor.
* The gizmo controls a pinned value in an open node editor. Pinning works by
clicking the gizmo icon next to the value.
Pull Request: https://projects.blender.org/blender/blender/pulls/112677
Basically this tries to make the API to stop and kill jobs more explicit &
consistent, so intent is expressed clearly & behavior as expected.
- Remove use of the job start callback address as identifier for the job.
6887dea786 already removed this pattern from the jobs system internals, this
commit also removes it from the API.
- Make stop & kill API and implementation consistent. E.g. don't stop/kill jobs
by either owner **or** type/callback in one function, and by owner (if
provided) **and** type/callback in another. Causes some small behavior
changes, documented inline.
- Use the same job type and API for all preview render jobs (change by Brecht).
There doesn't seem to be a need for the separated types, in fact the
separation might have caused some issues earlier (and added code complexity).
- Add/improve function documentation.
This does actually have subtle behavior changes that are known, see PR, but
they were investigated carefully and seem like implementing wanted behavior.
Co-authored-by: Brecht Van Lommel <brecht@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/123086
For the brush assets, this mechanism makes brush, texture, node tree and
image datablocks editable even when library linked.
This commit should introduce no functional change yet, as the code to
actually tag such libraries as editable will come later.
* These libraries and their datablocks are preserved when loading a new
blend file, much like the UI can be preserved.
* Operators that create new datablocks to be assigned to such datablocks
will put the datablocks in the same library immediately. This was
implemented for datablocks relevant for brush assets.
* RNA does not allow assignment of pointers from such linked datablocks
to local datablocks.
Co-authored-by: Bastien Montagne <bastien@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/121920
Move all header file into namespace.
Unnecessary namespaces was removed from implementations file.
Part of forward declarations in header was moved in the top part
of file just to do not have a lot of separate namespaces.
Pull Request: https://projects.blender.org/blender/blender/pulls/121637
- "can not" -> "cannot" in many places (ambiguous, also see
Writing Style guide).
- "Bezier" -> "Bézier": proper spelling of the eponym.
- Tool keymaps: make "Uv" all caps.
- "FFMPEG" -> "FFmpeg" (official spelling)
- Use MULTIPLICATION SIGN U+00D7 instead of MULTIPLICATION X U+2715.
- "LClick" -> "LMB", "RClick" -> "RMB": this convention is used
everywhere else.
- "Save rendered the image..." -> "Save the rendered image...": typo.
- "Preserve Current retiming": title case for property.
- Bend status message: punctuation.
- "... class used to define the panel" -> "header": copy-paste error.
- "... class used to define the menu" -> "asset": copy-paste error.
- "Lights user to display objects..." -> "Lights used...": typo.
- "-setaudio require one argument" -> "requires": typo.
Some issues reported by Joan Pujolar and Tamar Mebonia.
Pull Request: https://projects.blender.org/blender/blender/pulls/117856
This significantly simplifies memory management, mostly by avoiding
the need to free the memory manually. It may also improve performance,
since std::string has an inline buffer that can prevent heap
allocations and it stores the size.
Pull Request: https://projects.blender.org/blender/blender/pulls/117695
This is because the `NODE_OT_group_edit` operator reuses the last value
of the `Exit` property and once this is set it would always try to pop
(instead of push [which is what we want from the icon]) the nodegroup.
Callers of the operator set `Exit` explicitly elsewhere (just not
from node drawing -- where the way it is called [via a more general
callback] makes it difficult to set operator properties from there).
Solve by not saving the property for following usages (flag
`PROP_SKIP_SAVE`).
Fixes#117530.
Pull Request: https://projects.blender.org/blender/blender/pulls/117542
The term `PIL` stands for "platform independent library." It exists since the `Initial Revision`
commit from 2002. Nowadays, we generally just use the `BLI` (blenlib) prefix for such code
and the `PIL` prefix feels more confusing then useful. Therefore, this patch renames the
`PIL` to `BLI`.
Pull Request: https://projects.blender.org/blender/blender/pulls/117325
Along with the 4.1 libraries upgrade, we are bumping the clang-format
version from 8-12 to 17. This affects quite a few files.
If not already the case, you may consider pointing your IDE to the
clang-format binary bundled with the Blender precompiled libraries.
