When showing UV edges after modifiers [draw_uvs_shadow], these were never
drawn anti-aliased [in contrast to the 'main' UVs].
Also: they did not respect the new 'UV Opacity' setting.
Differential Revision: https://developer.blender.org/D7764
The issue was that we used GL_ALWAYS for depth checking here which would
lead to the depth information from objects being messed up.
It would not represent which object was closest to the camera.
Reviewed By: Clément Foucault, Jeroen Bakker, Campbell Barton
Differential Revision: http://developer.blender.org/D7710
Previously the playback mode "Frame Dropping" would not drop the correct
number of frames which would lead to slow playback.
For example, the playback target is 60fps. However we can only muster
around 32 fps.
The delta frames from the last step is in this case ~1.98 or so.
With the previous code, we would floor this. That would lead us to step
forward one frame each time, effectively playing back the animation at
half the speed as we will try to render every frame.
To fix this we simply save the remaining fraction from the previous
frame and use it to compute the current frame step.
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D7694
A follow up to T67212. I missed that the rotation interpolation had its
own code path.
The previous rotation push code was actually wrong (but smooth).
Now all of the actions behave correctly and is smoothly interpolated.
When using the mask modifier loose edges could be added to the mesh.
These edges weren't marked as loose edges and wasn't picked up by other
areas of blender.
This fix recalculates the loose edges so they have the correct flag
`ME_LOOSE_EDGE`.
Reviewed By: Sybren Stüvel
Differential Revision: https://developer.blender.org/D7766
From what I can see, there are two issues at play in {T76689} and its merged-in report {T76590}:
- In Blender ≤ 2.79 the bone layer dots were updated in the draw code. This ensured the info was up to date before drawing. This is no longer possible, as the drawing code uses evaluated objects, and those should not be written to. This has been addressed in rB709f126e8143 by calling the update function explicitly in various places in the code. The problem is that this wasn't added to all necessary spots.
- When in edit mode, changes are made to the edit bones but not to the 'actual' bones (this is synced when exiting edit mode). This causes undo to mess up the layer indicators.
I think both issues can be addressed by having the dependency graph update the used layer info as part of the armature evaluation. This will make the undo system work properly, and allows the removal of some `BKE_armature_refresh_layer_used()` from various places.
There is still the issue that there are two functions (`BKE_armature_refresh_layer_used()` and `ED_armature_edit_refresh_layer_used()`) that are both responsible for updating `bArmature::layer_used`. This is a trickier thing to solve, though, as the definition of the `EditBone` struct resides in the armature editor module. This means that blenkernel can't iterate over edit bones, but on the other hand the dependency graph shouldn't call any editor functions either. This is why I left the `ED_armature_edit_refresh_layer_used()` calls untouched.
The downside of recalculating `layer_used` from the dependency graph (at least in the way that I did it now) is that it is called every time a user moves a bone in pose mode. This frequency of updates is not necessary.
Differential Revision: https://developer.blender.org/D7709
Current implementation would update the nodetree of the freestyle scene not the composite scene.
Reviewed By: Dalai Felinto
Differential Revision: https://developer.blender.org/D7770
Side by side and top down views were rendered using an unset matrix.
This fix will reset the matrix just before copying the views to the
screen.
Reviewed By: Clément Foucault, Dalai Felinto
Differential Revision: https://developer.blender.org/D7777
The interpolation function of the datalayer was misssing so the sculpt
mask data was corrupted every time a subdivision surface modifier was
applied.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7640
When the number of triangles in a node became zero, the wireframe batch was
not freed along with the triangles batch and could still reference a freed
vertex buffer.
Ref T76858
Bug was actually in outliner code, paste operator would not generate any
undo step...
This was not correct ever, but with new undo code this has become a
critical issue, it cannot survive a situation where current main data
has been changed without a proper undo push.
This illustrates again how much of a catastrophic mess the 'tools'
callbacks of the outliner are currently, it has already caused us quiet
some pain in the past, and will keep doing so until this is fully
sanitized am afraid.
Would strongly suggest getting rid of thosw nasty mix of custom
callbacks requiring manual undo pushes, I do not see the added value of
this compared to regular menus calling regular operators. It only adds
confusion and extra code for nothing...
Issue is that update functions defined in
`rna_def_fmodifier_envelope_ctrl` (namely `rna_FModifier_update`) are
actually never called.
This is because UI code for FCurve modifiers often does not use RNA
buttons but uses custom update functions (or non at all). For example,
rB9a88bd55903a did this for the generators, envelope control points did
not have this at all.
This is now changed to use RNA buttons for the envelope control points,
this could done for other non-RNA buttons as well to get rid of
'validate_fmodifier_cb()'.
Maniphest Tasks: T76734
Differential Revision: https://developer.blender.org/D7732
settings
Stabilized ImBuf just needs to use the same colorspace and alpha
settings as the original one.
Maniphest Tasks: T76698
Differential Revision: https://developer.blender.org/D7713
This patch fixes T76277 by removing the incorrect cast from
`ptr->data` to `bNode`. The address of `ptr->owner_id` and
`ptr->data` both point to the node tree. Passing the node tree
incorrectly as a node into the `ED_node_tag_update_nodetree`
corrupts the data, because it attempts to set flags on the
node.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7747
Among other things, they were missing library pointer, session uuid
initialization, etc.
Fix T74546: Corrupted nodegroups crash blender when copy pasting or
appending them.
Fix (unreported) asserts when undoing some production scenes (from
coffee run e.g.).
Initialy caused by rB0aac74f18f2d.
This error was introduced wit the change in commit https://developer.blender.org/rB6a850f3cc840
As the brushes were not created, all modes except Edit were broken.
Now, the brushes and palette are not created when load the file in versioning code, but when the mode is enabled.
Also, if the brush already exist, the parameters are not reset as it was done in the versioning code in order to keep user settings.
The same logic is used for the default palette.
Caused by rB5593efec01c2.
Use first texture if we dont have an ImageUser (instead of multiview
one). Same fix as in rB9ace7e243978 / T74925.
Maniphest Tasks: T76755
Differential Revision: https://developer.blender.org/D7743
Right now:
- drag-drop in the Outliner prevents dropping inside linked collections
- drag-drop in the Outliner allows dropping inside overridden
collections (should not be the case)
- `Object Properties` > `Collections` panel allows to add to overridden
collection (should not be the case)
- `Object Properties` > `Collections` panel filters out non-local
collections (so adding to linked collections is forbidden)
- `bpy collection.objects.link()` allows to add to linked collections
(should not be the case)
- `bpy collection.objects.link()` allows to add to overridden
collections (should not be the case)
While this might be supported in the future for overriden collections,
these cases should not be allowed atm. since objects get lost on file
reload.
Note: for the case of the `Object Properties` > `Collections` panel,
this could be improved further to filter out overridden collections as
well.
Reviewers: mont29, brecht
Subscribers:
When auto-smooth enabled, but no custom normals layer present, the Alembic
exporter would incorrectly assume the mesh was shaded smooth. This is now
corrected, and normals are always written when auto-smooth is enabled.
Missing proper tagging of 'backward' pointer from fcurve to its group in
RNA would lead to infinite loop...
Issue was triggered by override, but crash could be generated from other
places as well (like from py console), on any action actually...
This removes grease pencil brush creation/dat-block delete on load,
since this causes duplicate data-blocks.
Add assert to prevent this happening in the future
since the error is isn't obvious.
