The main goal is to simplify adding support for nested node panels. The patch
makes use of the updated recursive node declarations introduced in
6ffc585fb8.
The main changes are:
* Rewritten node drawing in a way that makes ui design decisions like panel
visibility and margins more explicit. Especially the handling of margins is
much better now imo. Previously, it was very hard to change the margin for
specific cases without accidentally breaking other situations. Now each
possible case has an explicit margin. This needs a few more lines of code but
is much easier to work with.
* Rewritten node drawing in panel (sidebar + material properties) using the new
ways to iterate over the declaration.
* It's possible to add custom layouts at any point in the node declaration now.
This also replaces the need for having a `draw_buttons` callback for panels.
Pull Request: https://projects.blender.org/blender/blender/pulls/128822
This refactor contains the following changes:
* Each `PanelDeclaration` contains its direct children. Previously, it only knew
how many children it had. That added complexity to wherever we iterate over
the node declaration.
* Adds a new `DeclarationListBuilder` that is a base class of
`NodeDeclarationBuilder` and `PanelDeclarationBuilder`. It makes sure that the
same API for adding sockets, panels and separators exist for both.
* Modified declare functions for group, group input and group output nodes to
use the normal node builder api instead of doing something custom.
No functional changes are expected.
The main reason for this refactor is to simplify working with nested panels in
node declarations which is useful when we want to support nested panels in the
node editor. The node drawing code is not simplified in this patch, but that
should be easier afterwards.
Pull Request: https://projects.blender.org/blender/blender/pulls/128799
There were multiple issues that popped up when following the reproduction steps
in the report:
* Somehow, `socket.socket_data` was set for a custom socket type. I don't know
how that happened yet. I added some code to clean it up on file-load.
* `declaration_for_interface_socket` did not work yet when the socket type is
not registered. Now it just creates a custom socket with the correct idname,
even if that's not registered yet.
* There was a missing node tree update when changing `bl_socket_idname` of
interface sockets.
Pull Request: https://projects.blender.org/blender/blender/pulls/128191
This adds a new type of zone to Geometry Nodes that allows executing some nodes
for each element in a geometry.
## Features
* The `Selection` input allows iterating over a subset of elements on the set
domain.
* Fields passed into the input node are available as single values inside of the
zone.
* The input geometry can be split up into separate (completely independent)
geometries for each element (on all domains except face corner).
* New attributes can be created on the input geometry by outputting a single
value from each iteration.
* New geometries can be generated in each iteration.
* All of these geometries are joined to form the final output.
* Attributes from the input geometry are propagated to the output
geometries.
## Evaluation
The evaluation strategy is similar to the one used for repeat zones. Namely, it
dynamically builds a `lazy_function::Graph` once it knows how many iterations
are necessary. It contains a separate node for each iteration. The inputs for
each iteration are hardcoded into the graph. The outputs of each iteration a
passed to a separate lazy-function that reduces all the values down to the final
outputs. This final output can have a huge number of inputs and that is not
ideal for multi-threading yet, but that can still be improved in the future.
## Performance
There is a non-neglilible amount of overhead for each iteration. The overhead is
way larger than the per-element overhead when just doing field evaluation.
Therefore, normal field evaluation should be preferred when possible. That can
partially still be optimized if there is only some number crunching going on in
the zone but that optimization is not implemented yet.
However, processing many small geometries (e.g. each hair of a character
separately) will likely **always be slower** than working on fewer larger
geoemtries. The additional flexibility you get by processing each element
separately comes at the cost that Blender can't optimize the operation as well.
For node groups that need to handle lots of geometry elements, we recommend
trying to design the node setup so that iteration over tiny sub-geometries is
not required.
An opposite point is true as well though. It can be faster to process more
medium sized geometries in parallel than fewer very large geometries because of
more multi-threading opportunities. The exact threshold between tiny, medium and
large geometries depends on a lot of factors though.
Overall, this initial version of the new zone does not implement all
optimization opportunities yet, but the points mentioned above will still hold
true later.
Pull Request: https://projects.blender.org/blender/blender/pulls/127331
The reroute node used to be a bit special in the sense that its data type was
only stored in the sockets. However, typically, the ground truth data should be
stored in the node storage and then the socket types are derived from that.
For users, there should not be a noticable difference. However, from Python
it's not possible to modify the socket type directly on the socket anymore.
This is forbidden for other built-in nodes already too.
Instead, one can use the new `reroute_node.socket_idname` property to change
the type of a node. This internally also recreates the sockets with the correct
type.
Pull Request: https://projects.blender.org/blender/blender/pulls/121146
Use snake style naming for all the kernel nodes functions.
Omit kernel prefix in the names since of the using namespace.
Use full forms of the terms
('iter' -> 'iterator', 'ntree' -> 'node_tree', 'rem' -> 'remove', ...).
Pull Request: https://projects.blender.org/blender/blender/pulls/126416
Previously, values for `ID.flag` and `ID.tag` used the prefixes `LIB_` and
`LIB_TAG` respectively. This was somewhat confusing because it's not really
related to libraries in general. This patch changes the prefix to `ID_FLAG_` and
`ID_TAG_`. This makes it more obvious what they correspond to, simplifying code.
Pull Request: https://projects.blender.org/blender/blender/pulls/125811
Move all header file into namespace.
Unnecessary namespaces was removed from implementations file.
Part of forward declarations in header was moved in the top part
of file just to do not have a lot of separate namespaces.
Pull Request: https://projects.blender.org/blender/blender/pulls/121637
This allows setting a color tag for node groups which affects the header
color of group nodes. With this, node groups can look even more similar
to built-in nodes. The only remaining difference is the node group icon in
the node header.
Blender has quite a few different built-in color tags. Most of those are
exposed with very few exceptions. For example, the layout, interface
and pattern categories are not exposed because they are only for built-in
nodes or are not used anymore.
It's generally agreed upon that the set of different color tags is likely too
large. Some differences between color make more sense in some contexts
than in others. In the interest of consistency, it was decided to expose all
these categories anyway. If we ever decide to consolidate them, the worst
that can happen is that a group looses it's category, which wouldn't be too bad.
Pull Request: https://projects.blender.org/blender/blender/pulls/121385
This allows node groups to have a description that is shown in the add menu
or when hovering over the node header.
This new description is stored in `bNodeTree.description`. Unfortunately, it
conflicts a bit with `ID.asset_data.description`. The difference is that the latter
only exists for assets. However, it makes sense for node groups to have
descriptions even if they are not assets (just like `static` functions in C++ should
also be able to have comments). In some cases, node groups are also generated
by addons for a specific purpose. Those should still have a description without
being reusable to make it easier to understand for users.
The solution here is to use the asset description if the node group is an asset,
and to use `bNodeTree.description` otherwise. The description is synced
automatically when marking or clearing assets.
A side benefit of this solution is that appended node group assets can keep their
description, which is currently always lost.
Pull Request: https://projects.blender.org/blender/blender/pulls/121334
Caused by 25a10c211f.
The socket_type field for socket declarations wasn't set for declarations
created from the node group interface DNA tree structure. Arguably the
socket types should be set by the constructors, but setting it in one more
place isn't bad either, and is a simple fix for now.
Previously, we haven't added this because there were plans to use these
declarations at a higher abstraction level where one declaration potentially
contains more than one socket. This hasn't happened yet, and we are also using
other ways to achieve dynamic socket amounts (using dynamic declarations).
Therefore, it is reasonable to simplify the code by storing the integer socket
type in the declaration directly.
Pull Request: https://projects.blender.org/blender/blender/pulls/119691
Implements the design from #116067.
The socket type is called "Matrix" but it is often referred to as "Transform"
when that's what it is semantically. The attribute type is "4x4 Matrix" since
that's a lower level choice. Currently matrix sockets are always passed
around internally as `float4x4`, but that can be optimized in the future
when smaller types would give the same behavior.
A new "Matrix" utilities category has the following set of initial nodes"
- **Combine Transform**
- **Separate Transform**
- **Multiply Matrices**
- **Transform Direction**
- **Transform Vector**
- **Invert Matrix**
- **Transpose Matrix**
The nodes and socket type are behind an experimental flag for now,
which will give us time to make sure it's the right set of initial nodes.
The viewer node overlay doesn't support matrices-- they aren't supported
for rendering in general. They also aren't supported in the modifier interface
currently. But they are supported in the spreadsheet, where the value is
displayed in a tooltip.
Pull Request: https://projects.blender.org/blender/blender/pulls/116166
This patch adds support for _Menu Switch_ nodes and enum definitions in
node trees more generally. The design is based on the outcome of the
[2022 Nodes Workshop](https://code.blender.org/2022/11/geometry-nodes-workshop-2022/#menu-switch).
The _Menu Switch_ node is an advanced version of the _Switch_ node which
has a customizable **menu input socket** instead of a simple boolean.
The _items_ of this menu are owned by the node itself. Each item has a
name and description and unique identifier that is used internally. A
menu _socket_ represents a concrete value out of the list of items.
To enable selection of an enum value for unconnected sockets the menu is
presented as a dropdown list like built-in enums. When the socket is
connected a shared pointer to the enum definition is propagated along
links and stored in socket default values. This allows node groups to
expose a menu from an internal menu switch as a parameter. The enum
definition is a runtime copy of the enum items in DNA that allows
sharing.
A menu socket can have multiple connections, which can lead to
ambiguity. If two or more different menu source nodes are connected to a
socket it gets marked as _undefined_. Any connection to an undefined
menu socket is invalid as a hint to users that there is a problem. A
warning/error is also shown on nodes with undefined menu sockets.
At runtime the value of a menu socket is the simple integer identifier.
This can also be a field in geometry nodes. The identifier is unique
within each enum definition, and it is persistent even when items are
added, removed, or changed. Changing the name of an item does not affect
the internal identifier, so users can rename enum items without breaking
existing input values. This also persists if, for example, a linked node
group is temporarily unavailable.
Pull Request: https://projects.blender.org/blender/blender/pulls/113445
The previous commit introduced a new `RPT_()` macro to translate
strings which are not tooltips or regular interface elements, but
longer reports or statuses.
This commit uses the new macro to translate many strings all over the
UI.
Most of it is a simple replace from `TIP_()` or `IFACE_()` to
`RPT_()`, but there are some additional changes:
- A few translations inside `BKE_report()` are removed altogether
because they are already handled by the translation system.
- Messages inside `UI_but_disable()` are no longer translated
manually, but they are handled by a new regex in the translation
system.
Pull Request: https://projects.blender.org/blender/blender/pulls/116804
Pull Request: https://projects.blender.org/blender/blender/pulls/116804
Along with the 4.1 libraries upgrade, we are bumping the clang-format
version from 8-12 to 17. This affects quite a few files.
If not already the case, you may consider pointing your IDE to the
clang-format binary bundled with the Blender precompiled libraries.
Blender 4.0 added new socket types that get written into legacy node
group interfaces by forward compatibility code. Such unsupported socket
types have to be handled by the socket declaration system and ignored
during execution.
Ported blender-v3.6-release fix#114056
Pull Request: https://projects.blender.org/blender/blender/pulls/114401
The last good commit was 8474716abb.
After this commits from main were pushed to blender-v4.0-release. These are
being reverted.
Commits a4880576dc from to b26f176d1a that happend afterwards were meant for
4.0, and their contents is preserved.
In 3.6 the names of node group sockets were using char arrays, but now
use allocated strings. The RNA system assigns nullptr to such strings
when assigning an empty string through python (UI assignment appears to
always generate a valid string). This creates issues with many STL
functions, in particular assigning nullptr to `std::string` will crash.
We have to check for valid pointers before using them in places that
don't handle nullptrs.
Pull Request: https://projects.blender.org/blender/blender/pulls/113924
The longer term plan is to allow using the same node groups in different
node tree types anyway. Also, the implicit field inputs is something that
shader nodes could benefit from soonish already.
This also fixes a bug where the geometry nodes specific declare function
was not used anymore since 38813a7441.
This helps solving the problem encountered in #113553. The problem is that we
currently can't support link-drag-search for nodes which have a dynamic declaration.
With this patch, there is only a single `declare` function per node type, instead of
the separate `declare` and `declare_dynamic` functions. The new `declare` function
has access to the node and tree. However, both are allowed to be null. The final
node declaration has a flag for whether it depends on the node context or not.
Nodes that previously had a dynamic declaration should now create as much of
the declaration as possible that does not depend on the node. This allows code
like for link-drag-search to take those sockets into account even if the other
sockets are dynamic.
For node declarations that have dynamic types (e.g. Switch node), we can also
add extra information to the static node declaration, like the identifier of the socket
with the dynamic type. This is not part of this patch though.
I can think of two main alternatives to the approach implemented here:
* Define two separate functions for dynamic nodes. One that creates the "static
declaration" without node context, and on that creates the actual declaration with
node context.
* Have a single declare function that generates "build instructions" for the actual
node declaration. So instead of building the final declaration directly, one can for
example add a socket whose type depends on a specific rna path in the node.
The actual node declaration is then automatically generated based on the build
instructions. This becomes quite a bit more tricky with dynamic amounts of sockets
and introduces another indirection between declarations and what sockets the node
actually has.
I found the approach implemented in this patch to lead to the least amount of
boilerplate (doesn't require a seperate "build instructions" data structure) and code
duplication (socket properties are still only defined in one place). At the same time,
it offers more flexibility to how nodes can be dynamic.
Pull Request: https://projects.blender.org/blender/blender/pulls/113742
Inlined sockets in the same vertical space are no longer supported.
This removes `input_output` socket declarations, the inlining feature in
node drawing, and the `Both` option for node group interface sockets.
Versioning code splits existing node group sockets into individual
sockets again. Unfortunately some links may get lost in versioning files
using the feature, because of an unnoticed bug: Socket identifiers have
to be unique in the node group items list but inlined input/output
sockets have the same identifier. This still works for most situations
because uniqueness is only required within input/output lists. Creating
proper unique identifiers will discard any link from the previous output
socket. This cannot easily be fixed without `after_linking` versioning
code, which should be avoided.
Pull Request: https://projects.blender.org/blender/blender/pulls/112560
Declarations can use the `add_input_output` method to create a combined input/output socket. The drawing code supports moving sockets up one vertical slot to align them with the predecessor.
Closes#112235
Pull Request: https://projects.blender.org/blender/blender/pulls/112250
The declaration code for node groups was relying on `bNodeSocketType` to
provide the subtype of a socket. This worked before node panels
(#111348) since the interface sockets had a fully refined typeinfo.
Now the interface sockets use only the base typeinfo and the socket
subtype is stored in the interface data itself.
Pull Request: https://projects.blender.org/blender/blender/pulls/112286
Now that specific menus can be searched directly (see 7f9d51853c),
there is no need to maintain separate search functionality for adding
nodes. This PR removes the add node search. In a way this brings us
closer to the `NodeItem` situation before, but the setup is more
flexible since the menus are more standard and easier to customize.
In the few ways we customized the node search items before, this gives
us the same results as before. Overall the searching is less flexible,
but I think that is just a tradeoff we have to accept for the simplicity
of searching menus. In the future menus could be made more dynamic,
with each builtin node's menu path stored on the node type, similar to
assets. That might be a nice compromise. In the meantime this code
is just dead weight.
Pull Request: https://projects.blender.org/blender/blender/pulls/112056
Node group sockets can be set to "both" for input/output, generating
two socket declarations in the same panel. Panel size was calculated
using only the items count, which is <= the actual declarations count.
This patch calculates actual declarations count as the panel size.
Panel size variable renamed to `num_child_decls` to distinguish from
`num_items`.
Pull Request: https://projects.blender.org/blender/blender/pulls/112013
Part 3/3 of #109135, #110272
Switch to new node group interfaces and deprecate old DNA and API.
This completes support for panels in node drawing and in node group
interface declarations in particular.
The new node group interface DNA and RNA code has been added in parts
1 and 2 (#110885, #110952) but has not be enabled yet. This commit
completes the integration by
* enabling the new RNA API
* using the new API in UI
* read/write new interfaces from blend files
* add versioning for backward compatibility
* add forward-compatible writing code to reconstruct old interfaces
All places accessing node group interface declarations should now be
using the new API. A runtime cache has been added that allows simple
linear access to socket inputs and outputs even when a panel hierarchy
is used.
Old DNA has been deprecated and should only be accessed for versioning
(inputs/outputs renamed to inputs_legacy/outputs_legacy to catch
errors). Versioning code ensures both backward and forward
compatibility of existing files.
The API for old interfaces is removed. The new API is very similar but
is defined on the `ntree.interface` instead of the `ntree` directly.
Breaking change notifications and detailed instructions for migrating
will be added.
A python test has been added for the node group API functions. This
includes new functionality such as creating panels and moving items
between different levels.
This patch does not yet contain panel representations in the modifier
UI. This has been tested in a separate branch and will be added with a
later PR (#108565).
Pull Request: https://projects.blender.org/blender/blender/pulls/111348
Listing the "Blender Foundation" as copyright holder implied the Blender
Foundation holds copyright to files which may include work from many
developers.
While keeping copyright on headers makes sense for isolated libraries,
Blender's own code may be refactored or moved between files in a way
that makes the per file copyright holders less meaningful.
Copyright references to the "Blender Foundation" have been replaced with
"Blender Authors", with the exception of `./extern/` since these this
contains libraries which are more isolated, any changed to license
headers there can be handled on a case-by-case basis.
Some directories in `./intern/` have also been excluded:
- `./intern/cycles/` it's own `AUTHORS` file is planned.
- `./intern/opensubdiv/`.
An "AUTHORS" file has been added, using the chromium projects authors
file as a template.
Design task: #110784
Ref !110783.
Add a quaternion rotation socket type, and using the recently added
rotation attribute type, support the type in most of the multi-type
geometry nodes, and modifier attribute inputs and outputs.
The socket is still exposed with an XYZ Euler default value.
In the future we can add modes to this rotation value similar
to object rotations.
Rotation values have no implicit conversions to other types.
Nodes to convert to and from rotation values will be added
in a follow-up commit.
For now, the new socket type is hidden behind and experimental
option, because we haven't chosen the final color for it yet.
Pull Request: https://projects.blender.org/blender/blender/pulls/108903
A lot of files were missing copyright field in the header and
the Blender Foundation contributed to them in a sense of bug
fixing and general maintenance.
This change makes it explicit that those files are at least
partially copyrighted by the Blender Foundation.
Note that this does not make it so the Blender Foundation is
the only holder of the copyright in those files, and developers
who do not have a signed contract with the foundation still
hold the copyright as well.
Another aspect of this change is using SPDX format for the
header. We already used it for the license specification,
and now we state it for the copyright as well, following the
FAQ:
https://reuse.software/faq/
See: https://projects.blender.org/blender/blender/issues/103343
Changes:
1. Added `BKE_node.hh` file. New file includes old one.
2. Functions moved to new file. Redundant `(void)`, `struct` are removed.
3. All cpp includes replaced from `.h` on `.hh`.
4. Everything in `BKE_node.hh` is on `blender::bke` namespace.
5. All implementation functions moved in namespace.
6. Function names (`BKE_node_*`) changed to `blender::bke::node_*`.
7. `eNodeSizePreset` now is a class, with renamed items.
Pull Request: https://projects.blender.org/blender/blender/pulls/107790
Only use the term len & maxlen when they represent the length & maximum
length of a string. Instead of the available bytes to use.
Also include the data they're referencing as a suffix, otherwise it's
not always clear what the length is in reference to.
