The Attribute Convert node provides functionality to change attributes
between different domains and data types. Before it was impossible to
write to a UV Map attribute with the attribute math nodes since they
did not output a 2D vector type. This makes it possible to
"convert into" a UV map attribute.
The data type conversion uses the implicit conversions provided by
`\nodes\intern\node_tree_multi_function.cc`.
The `Auto` domain mode chooses the domain based on the following rules:
1. If the result attribute already exists, use that domain.
2. If the result attribute doesn't exist, use the source attribute domain.
3. Otherwise use the default domain (points).
See {T85700}
Differential Revision: https://developer.blender.org/D10624
This operator initializes mask values for the entire mesh. It supports
different modes for initializing those values, and more will be added in
the future.
The initial version supports generating a random mask per vertex, Face
Sets or loose parts. These masks are useful for introducing variations
in the model using the filters (both shapes and colors).
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10679
There is no reason to hide the 'Scale' and 'Scale Randomness' options
for fluid particles that are rendered as 'Object'.
It is possible that hiding these options was just an oversight and
not intentional.
This patch adds a node, that removes an attribute if possible,
otherwise it adds an error message.
Differential Revision: https://developer.blender.org/D10697
This implements the MVP for the new spreadsheet editor (T85879). The functionality
is still very limited, but it proved to be useful already. A more complete picture
of where we want to go with the new editor can be found in T86279.
Supported features:
* Show point attributes of evaluated meshes (no original data, no other domains,
no other geometry types, yet). Since only meshes are supported right now, the
output of the Point Distribute is not shown, because it is a point cloud.
* Only show data for selected vertices when the mesh is in edit mode.
Different parts of Blender keep track of selection state and original-indices with
varying degrees of success. Therefore, when the selected-only filter is used, the
result might be a bit confusing when using some modifiers or nodes. This will
be improved in the future.
* All data is readonly. Since only evaluated data is displayed currently, it has to
be readonly. However, this is not an inherent limitation of the spreadsheet editor.
In the future editable data will be displayed as well.
Some boilerplate code for the new editor has been committed before in
rB9cb5f0a2282a7a84f7f8636b43a32bdc04b51cd5.
It would be good to let the spreadsheet editor mature for a couple of weeks as part
of the geometry nodes project. Then other modules are invited to show their own data
in the new editor!
Differential Revision: https://developer.blender.org/D10566
Adds toggle to graph editor (View->Show Extrapolation). When disabled,
then fcurves only draw over the keyframe range. For baked fcurves and
ghost fcurves, the range is all sampled points.
It is intended for frequent use so anybody could assign hotkey or add
to quick favorites that's why GE-View is the best place for it.
Show Extrapolation is the default.
Reviewed By: sybren, Stan1, looch
Differential Revision: http://developer.blender.org/D10442
This adds an extra option to the Face Sets Init operator to initialize
individual Face Sets based on the current Face Sets boundaries.
In particular, this is useful for splitting the patterns created by
Expand into individual Face Sets for further editing.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10608
Auto frees cryptomatte session when it the pointer is collected from the
stack.
Reviewed By: Jacques Lucke
Differential Revision: https://developer.blender.org/D10667
Prior to rB99a7c917eab7, Shift + D was used to set detail size for both
constant and relative detail (using radial control). The commit added an
improved operator for doing this for constant detail (showing the
triangle grid representation), but left the user without a shortcut to
do this for relative detail.
Interestingly rB99a7c917eab7 only changed this for the Blender keymap,
the Industy Compatible keymap still has the "old" entry.
This patch changes both keymaps to have both entries.
For user experience, the real change here is to have both available on
one 'primary' shortcut (Shift+D), the improved
'dyntopo_detail_size_edit' operator will now act on all possible cases.
If it deals with constant detail, it acts as before, if it deals with
relative detail etc, it will fallback to the "old" way of doing it via
radial control instead. I assume this adresses what was stated in
rB99a7c917eab7: "Deciding if both detail sizes can be unified needs a
separate discussion"
Also, move dyntopo_detail_size_edit to sculpt_detail.c
Fixes T83828
Maniphest Tasks: T83828
Differential Revision: https://developer.blender.org/D9871
In {rBb279fef85d1a} the button that displays a texture in a Properties
Editor texture tab was added for geometry nodes.
Same commit will actually show them for Brush textures as well (but
disabled -- because the Texture users dont match).
This task is for finanlizing proper support for Brush textures as well.
There was originally a separate patch for this (see {D9813}) but most of
it was already implemented by above commit.
**what this solves**
from the default startup file:
- go to any sculpt or paint mode and add a texture to your brush
- observe the button to edit this texture in the Properties editor is
greyed out
{F9860470}
There are two possible solutions:
- [1] call the texture template for the brush `texture_slot` texture
(instead of the brush 'texture') from the python UI code, this is then
working in harmony how ButsTextureUser works for brushes
- [2] tweak the way `ButsTextureUser` works (dont rely on
`RNA_BrushTextureSlot` there)
This patch implements the first solution.
Since `brush.texture_slot` is `br->mtex` RNA wrapped and `brush.texture`
is `br->mtex.tex` RNA wrapped, this really comes down to doing the same
thing. I checked that creating a new texture and unlinking/deleting will
have the same results even though they take slightly different code
paths: assignment and NULLing the pointers are working on the same (see
above) and RNA update callbacks also do the same [even though in
different functions]:
- brush.texture will do rna_Brush_main_tex_update
- brush.texture_slot.texture will do rna_TextureSlotTexture_update /
rna_TextureSlot_update
(only difference here is an additional DEG relations update in the case
of texture_slot which should not do harm)
Differential Revision: https://developer.blender.org/D10626
This makes the following changes to the name of the two
geometry nodes subvision nodes:
- `Subdivision Surface` -> `Subdivide Smooth`
- `Subdivision Surface Simple` -> `Subdivide`
Most of the benefit is that the names are shorter, but it also better
mirrors the naming of operations in edit mode, and phrases the names
more like actions. This was discussed with the geometry nodes team.
This adds the initial boilerplate code that is required to introduce
the new spreadsheet editor. The editor is still hidden from the ui.
It can be made visible by undoing the change in `rna_screen.c`.
This patch does not contain any business logic for the spreadsheet editor.
Differential Revision: https://developer.blender.org/D10645
Ref T86279.
Add operator `FILE_OT_view_selected` to the file browser (and thus also
to the asset browser) that scrolls selected files into view.
This includes the active file, even though it is not selected. In
certain cases the active file can loose its selected state (clicking
next to it, or refreshing the asset browser), but then it's still shown
in the right-hand sidebar. Because of this, I found it important to take
it into account when scrolling.
This also includes a change to the keymaps:
- Blender default: {key NUMPAD_PERIOD} is removed from the "reload"
operator, and assigned to the new "view selected files" operator. The
reload operator was already doubly bound, and now {key R} is the only
remaining hotkey for it.
- Industry compatible: {key F} is assigned to the new "view selected
files" operator. This is consistent with the other "view selected"
operators in other editors.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D10583
The commit rB6f63417b500d that made exact boolean work on meshes
with holes (like Suzanne) unfortunately dramatically slowed things
down on other non-manifold meshes that don't have holes and didn't
need the per-triangle insideness test.
This adds a hole_tolerant parameter, false by default, that the user
can enable to get good results on non-manifold meshes with holes.
Using false for this parameter speeds up the time from 90 seconds
to 10 seconds on an example with 1.2M triangles.
scenarios
In general, I could not find a reason executing from the python console
should not do an Undo push. Running a script from the Text Editor does
this as well and this seems generally useful.
Without an Undo push, one can easily run into situations were IDs have
been added or removed and undo on would then cause trouble (e.g. first
selection then bpy.ops.object.duplicate() -- this crashed as reported in
T86293 -- duplicate does not get its own undo push because it is not the
last op in the list, wm->op_undo_depth is not zero). This has changed
with the Undo refactor, so in essence the root cause is the same as
T77557, Legacy Undo does not suffer from the crash (but misses
the generally useful undo push from the console still)
Now add Undo to CONSOLE_OT_execute bl_options ('UNDO_GROUPED' seems more
appropriate than plain 'UNDO' since pasting multiple lines of code will
call CONSOLE_OT_execute multiple times in a row).
Maniphest Tasks: T86293
Differential Revision: https://developer.blender.org/D10625
- Only sort by the preset name (not it's directory).
- Remove redundant string conversion.
- Only call lower() once on the input.
- Don't assign the lambda to a variable for single use.
It is quite common to high framerate video with modern cameras. To make
it easier to edit this footage new framerate presets are added and the
soft limit increased.
Note there is a bug with preset ordering, Blender thinks "120" goes
before "24" this bug needs to be fixed before these changes can be
merged.
Differential Revision: https://developer.blender.org/D10553
Now, if the Autokey is not enabled, a new frame is not created and it is used the last active one. If no active frame, a message is displayed and the operation is canceled.
This is a common request for 2D artists.
Also, grease pencil was not working as Blender does in other areas.
Reviewed By: pepeland
Differential Revision: https://developer.blender.org/D10557
Expand is a new operator for Sculpt Mode which is intended to be the main
tool for masking, Face Set editing, interacting with the filters and pattern
creation.
The fundamentals of the tool are similar to the previous sculpt.mask_expand
operator. It shares the same default shortcuts and functionality, making
the previous operator obsolete.
The shortcuts to execute the operator are:
- Shift + A: Expand mask
- Shift + Alt + A: Expand mask by normals
- Shift + W: Expand Face Set
- Shift + Alt + W: Resize current Face Set
The main changes compared to the previous sculpt.mask_expand operator are:
- Modal keymap, all operator options can be changed in real time while the
operator is running.
- Supports creating Mask, Face Sets and Sculpt Vertex Colors.
- Much better code, new features can be easily integrated.
Limitations:
- All Mask operations are supported for Sculpt Vertex colors, but not exposed
by default as their support is still experimental.
- Dyntopo does not support any Face Set or Sculpt Vertex Colors. functionality
(they are not implemented in general for Dyntopo).
- Multires does not support any feature related to geodesic distances.
- Multires does not support vertex colors.
- Multires does not support recursions.
- In Multires, Face Sets snaping does not initialize all current enabled Face
Sets when toggling snapping.
- In Multires, Face Sets are created at base mesh level (works by this by
design, like any other tool).
- Unlike the previous mask_expand operator, this one does not blur the mask
by default after finishing Expand as that does not fit the new design.
The mask can still be blurred by using the mask filter manually.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10455
The Purge operator to remove unused IDs can now also remove 'indirectly
unused' data-blocks (those only used by unused ones, recursively).
It can also now only operate on linked, or on local data.
All those options are exposed in the `File -> Cleanup` main menu.
The behavior of the `Purge` button in the Outliner remains unchanged,
needs some UI/UX design task for that.
Clear the weird term "Metaelement".
These are the metaballs (elements) inside one metaball objects.
- "Meta Ball" to "Metaball"
- "Metaelement", "Meta element" to "Metaball element"
Differential Revision: https://developer.blender.org/D9910
Changes include using proper and consistent grammar, simplifying
phrasing, using correct terminology, and not including python API
identifiers in tooltips.
Differential Revision: https://developer.blender.org/D9924
The colons are not necessary in these situations because it's clear
that the label applies to the next group of buttons anyway, and they
add unecessary visual complexity. Committing as part of D9924.
When using particle mode, the particle tool settings were always
displayed, even if select/cursor is the active tool. This patch
hides the properties of the particle tools for non-brush tools,
using the same check as in other modes.
Differential Revision: https://developer.blender.org/D10266
Sync the list of icons in CMakeLists.txt with UI_icons.h.
Restore, in the source file, the FUND icon that was accidentally
deleted.
Delete four old/unused icons.
See also D9715.
rB1f5647c07d15 introduced for the first time a unicode escape in strings
to be translated, directly extracted from C-code itself.
This revealed that this case was not properly handled by current code,
for now we work around using `raw_unicode_escape` encoding/decoding of
python.
