NDEBUG is part of the C standard and disables asserts. Only this will
now be used to decide if asserts are enabled.
DEBUG was a Blender specific define, that has now been removed.
_DEBUG is a Visual Studio define for builds in Debug configuration.
Blender defines this for all platforms. This is still used in a few
places in the draw code, and in external libraries Bullet and Mantaflow.
Pull Request: https://projects.blender.org/blender/blender/pulls/115774
This helps solving the problem encountered in #113553. The problem is that we
currently can't support link-drag-search for nodes which have a dynamic declaration.
With this patch, there is only a single `declare` function per node type, instead of
the separate `declare` and `declare_dynamic` functions. The new `declare` function
has access to the node and tree. However, both are allowed to be null. The final
node declaration has a flag for whether it depends on the node context or not.
Nodes that previously had a dynamic declaration should now create as much of
the declaration as possible that does not depend on the node. This allows code
like for link-drag-search to take those sockets into account even if the other
sockets are dynamic.
For node declarations that have dynamic types (e.g. Switch node), we can also
add extra information to the static node declaration, like the identifier of the socket
with the dynamic type. This is not part of this patch though.
I can think of two main alternatives to the approach implemented here:
* Define two separate functions for dynamic nodes. One that creates the "static
declaration" without node context, and on that creates the actual declaration with
node context.
* Have a single declare function that generates "build instructions" for the actual
node declaration. So instead of building the final declaration directly, one can for
example add a socket whose type depends on a specific rna path in the node.
The actual node declaration is then automatically generated based on the build
instructions. This becomes quite a bit more tricky with dynamic amounts of sockets
and introduces another indirection between declarations and what sockets the node
actually has.
I found the approach implemented in this patch to lead to the least amount of
boilerplate (doesn't require a seperate "build instructions" data structure) and code
duplication (socket properties are still only defined in one place). At the same time,
it offers more flexibility to how nodes can be dynamic.
Pull Request: https://projects.blender.org/blender/blender/pulls/113742
Currently nodes are reordered so that the "on top" nodes are last in
the list. Node order changing for simple operations like selection
means we either have to reevaluate the node tree data-block on
selections or accept that the evaluated order can be different from the
original. Currently we do the latter (see d76a0e98ba), but
makes it complex to access nodes by index, and is hard to reason about.
Instead of reordering nodes, store the ui order in the node itself
and sort the nodes before drawing them or doing any processing
that depends on the "depth."
The "selected_nodes" list in the context is no longer ordered by the
recent selection.
Pull Request: https://projects.blender.org/blender/blender/pulls/113419
The goal is to reduce redundancy by abstracting over the different types of node
tree zones. This makes it easier to add new zone types and makes the intend of
code more clear. For example, now it is more obvious what code deals with zones
in general and what does simulation specific things.
Pull Request: https://projects.blender.org/blender/blender/pulls/112531
Calling an API function after the node panels patch does not internally
tag the node tree with `NTREE_CHANGED_INTERFACE` any more, because the
node tree is not directly accessible from `bNodeTreeInterface`. Before
node panels the API functions for interfaces could tag the tree directly
for later update consideration, which now requires explicit tagging
calls.
The fix is to add a flag and mutex directly to `bNodeTreeInterface`, so
API methods can tag after updates. This mostly copies runtime data
concepts from `bNodeTree`. The `ensure_interface_cache` method is
equivalent to `ensure_topology_cache` and should be called before
accessing `interface_inputs` and similar cache data.
Pull Request: https://projects.blender.org/blender/blender/pulls/111741
Listing the "Blender Foundation" as copyright holder implied the Blender
Foundation holds copyright to files which may include work from many
developers.
While keeping copyright on headers makes sense for isolated libraries,
Blender's own code may be refactored or moved between files in a way
that makes the per file copyright holders less meaningful.
Copyright references to the "Blender Foundation" have been replaced with
"Blender Authors", with the exception of `./extern/` since these this
contains libraries which are more isolated, any changed to license
headers there can be handled on a case-by-case basis.
Some directories in `./intern/` have also been excluded:
- `./intern/cycles/` it's own `AUTHORS` file is planned.
- `./intern/opensubdiv/`.
An "AUTHORS" file has been added, using the chromium projects authors
file as a template.
Design task: #110784
Ref !110783.
First implementation of node previews in the shader node editor. Using
the same user interface as compositor node previews, most shader nodes
can now be previewed (except group in/output and material output).
This is currently still an experimental feature, as polishing of the
user experience and performance improvements are planned. These will
be easier to do as incremental changes on this implementation.
See #110353 for details on the work that remains to be done and known
limitations.
Implementation notes:
We take advantage of the `RenderResult` available as `ImBuf` images to
store a `Render` for every viewed nested node tree present in a
`SpaceNode`. The computation is initiated at the moment of drawing nodes
overlays.
One render is started for the current nodetree, having a `ViewLayer`
associated with each previewed node. We separate the previewed nodes in
two categories: the shader ones and the non-shader ones.
- For non-shader nodes, we use AOVs which highly speed up the rendering
process by rendering every non-shader nodes at the same time. They are
rendered in the first `ViewLayer`.
- For shader nodes, we render them each in a different `ViewLayer`, by
rerouting the node to the output of the material in the preview scene.
The preview scene takes the same aspect as the Material preview scene,
and the same preview object is used.
At the moment of drawing the node overlay, we take the `Render` of the
viewed node tree and extract the `ImBuf` of the wanted viewlayer/pass
for each previewed node.
Pull Request: https://projects.blender.org/blender/blender/pulls/110065
Show node group inputs in the redo panel, including the
"use attribute" toggle. There are a few limitations that will
be solved separately:
- The redo panel is _always_ drawn, there is no way to show it conditionally yet
- There is no way to add the operator name to the redo panel title yet
- Attribute search is still missing for attribute inputs
Pull Request: https://projects.blender.org/blender/blender/pulls/109975
This adds support for running a set of nodes repeatedly. The number
of iterations can be controlled dynamically as an input of the repeat
zone. The repeat zone can be added in via the search or from the
Add > Utilities menu.
The main use case is to replace long repetitive node chains with a more
flexible alternative. Technically, repeat zones can also be used for
many other use cases. However, due to their serial nature, performance
is very sub-optimal when they are used to solve problems that could
be processed in parallel. Better solutions for such use cases will
be worked on separately.
Repeat zones are similar to simulation zones. The major difference is
that they have no concept of time and are always evaluated entirely in
the current frame, while in simulations only a single iteration is
evaluated per frame.
Stopping the repetition early using a dynamic condition is not yet
supported. "Break" functionality can be implemented manually using
Switch nodes in the loop for now. It's likely that this functionality
will be built into the repeat zone in the future.
For now, things are kept more simple.
Remaining Todos after this first version:
* Improve socket inspection and viewer node support. Currently, only
the first iteration is taken into account for socket inspection
and the viewer.
* Make loop evaluation more lazy. Currently, the evaluation is eager,
meaning that it evaluates some nodes even though their output may not
be required.
Pull Request: https://projects.blender.org/blender/blender/pulls/109164
On my system `int(PIL_check_seconds_timer() * 1000000.0)` always game
the same result because the double value was out of the int range.
Use PIL_check_seconds_timer_i instead (as is done elsewhere).
The simulation state used by simulation nodes is owned by the modifier. Since a
geometry nodes setup can contain an arbitrary number of simulations, the modifier
has a mapping from `SimulationZoneID` to `SimulationZoneState`. This patch changes
what is used as `SimulationZoneID`.
Previously, the `SimulationZoneID` contained a list of `bNode::identifier` that described
the path from the root node tree to the simulation output node. This works ok in many
cases, but also has a significant problem: The `SimulationZoneID` changes when moving
the simulation zone into or out of a node group. This implies that any of these operations
loses the mapping from zone to simulation state, invalidating the cache or even baked data.
The goal of this patch is to introduce a single-integer ID that identifies a (nested) simulation
zone and is stable even when grouping and un-grouping. The ID should be stable even if the
node group containing the (nested) simulation zone is in a separate linked .blend file and
that linked file is changed.
In the future, the same kind of ID can be used to store e.g. checkpoint/baked/frozen data
in the modifier.
To achieve the described goal, node trees can now store an arbitrary number of nested node
references (an array of `bNestedNodeRef`). Each nested node reference has an ID that is
unique within the current node tree. The node tree does not store the entire path to the
nested node. Instead it only know which group node the nested node is in, and what the
nested node ID of the node is within that group. Grouping and un-grouping operations
have to update the nested node references to keep the IDs stable. Importantly though,
these operations only have to care about the two node groups that are affected. IDs in
higher level node groups remain unchanged by design.
A consequence of this design is that every `bNodeTree` now has a `bNestedNodeRef`
for every (nested) simulation zone. Two instances of the same simulation zone (because
a node group is reused) are referenced by two separate `bNestedNodeRef`. This is
important to keep in mind, because it also means that this solution doesn't scale well if
we wanted to use it to keep stable references to *all* nested nodes. I can't think of a
solution that fulfills the described requirements but scales better with more nodes. For
that reason, this solution should only be used when we want to store data for each
referenced nested node at the top level (like we do for simulations).
This is not a replacement for `ViewerPath` which can store a path to data in a node tree
without changing the node tree. Also `ViewerPath` can contain information like the loop
iteration that should be viewed (#109164). `bNestedNodeRef` can't differentiate between
different iterations of a loop. This also means that simulations can't be used inside of a
loop (loops inside of a simulation work fine though).
When baking, the new stable ID is now written to disk, which means that baked data is
not invalidated by grouping/un-grouping operations. Backward compatibility for baked
data is provided, but only works as long as the simulation zone has not been moved to
a different node group yet. Forward compatibility for the baked data is not provided
(so older versions can't load the data baked with a newer version of Blender).
Pull Request: https://projects.blender.org/blender/blender/pulls/109444
Previously, there were two independent algorithms for analysing how anonymous
attributes are used in a node tree: One that just computed the `aal::RelationsInNode`
for an entire node tree and one that performed a more in depth analysis to
determine how far anonymous attributes should be propagated.
As it turns out, both operations can also be done at the same time and the result
can be cached on the node tree. This reduces the amount of code and allows for
better code reuse.
This simplification is likely only an intermediate step as things will probably have
to be refactored further to support e.g. serial loops (#108896).
Prevent make links operator from creating links to sockets that are
already linked to a muted link.
The `SOCK_IS_LINKED` flag is used to check if there already is a link
connecting to the socket but when the link is muted, the flag wasn't set
leading to issues in parts of the code that used the flag to check
for any type of connected link.
This commit now also sets `SOCK_IS_LINKED` when links are muted and
adds an additional check in places where different behavior is expected
for muted links.
Pull Request: https://projects.blender.org/blender/blender/pulls/108375
A lot of files were missing copyright field in the header and
the Blender Foundation contributed to them in a sense of bug
fixing and general maintenance.
This change makes it explicit that those files are at least
partially copyrighted by the Blender Foundation.
Note that this does not make it so the Blender Foundation is
the only holder of the copyright in those files, and developers
who do not have a signed contract with the foundation still
hold the copyright as well.
Another aspect of this change is using SPDX format for the
header. We already used it for the license specification,
and now we state it for the copyright as well, following the
FAQ:
https://reuse.software/faq/
See: https://projects.blender.org/blender/blender/issues/103343
Changes:
1. Added `BKE_node.hh` file. New file includes old one.
2. Functions moved to new file. Redundant `(void)`, `struct` are removed.
3. All cpp includes replaced from `.h` on `.hh`.
4. Everything in `BKE_node.hh` is on `blender::bke` namespace.
5. All implementation functions moved in namespace.
6. Function names (`BKE_node_*`) changed to `blender::bke::node_*`.
7. `eNodeSizePreset` now is a class, with renamed items.
Pull Request: https://projects.blender.org/blender/blender/pulls/107790
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
For example
```
OIIOOutputDriver::~OIIOOutputDriver()
{
}
```
becomes
```
OIIOOutputDriver::~OIIOOutputDriver() {}
```
Saves quite some vertical space, which is especially handy for
constructors.
Pull Request: https://projects.blender.org/blender/blender/pulls/105594
Since 90ea1b7643, node trees have been reevaluated
after many selection operations because nodes are sorted based on
the selection status and an update tag was added for that. However,
for years the node order was allowed to be different between the
original and evaluated copy of node trees.
Though it is a bit sketchy to have that difference in the evaluated
node tree, reevaluations for just selection are very bad, so use a
"smaller" update tag and add a comment for justification.
Differential Revision: https://developer.blender.org/D17023
Since a year and a half ago we've been switching to a new way to
represent what sockets a node should have called "declarations"
that's easier to use, clearer, and more flexible for upcoming
features like dynamic socket counts or generic type sockets.
All builtin nodes with a static set of sockets have switched, but one
missing area has been group nodes and group input/output nodes. These
nodes have **dynamic** declarations which change based on their
properties or the group they're inside of. This patch addresses that,
in preparation for using the same dynamic declaration feature for
simulation nodes.
Generally there shouldn't be user-visible differences, but one benefit
is that user-created socket descriptions are now visible directly in
the node editor for group nodes and group input/output nodes.
The commit contains a few changes:
- Add a node type callback for building dynamic declarations with
different arguments
- Add an `Extend` socket declaration for the "virtual" sockets used
for connecting new links
- A similar `Custom` socket declaration is used for addon-defined socket
- Simplify the node update loop to use the declaration to build update
sockets
- Replace the "group update" functions with the declaration building
- Move the node group input/output link creation to link drag operator
- Make the field status part of group node declarations
(not for group input/output nodes though)
- Some fixes for declarations to make them update and build properly
Differential Revision: https://developer.blender.org/D16850
Since internal links are only runtime data, we have the flexibility to
allocating every link individually. Instead we can store links directly
in the node runtime vector. This allows avoiding many small allocations
when copying and changing node trees.
In the future we could use a smaller type like a pair of sockets
instead of `bNodeLink` to save memory.
Differential Revision: https://developer.blender.org/D16960
Previously, the lifetimes of anonymous attributes were determined by
reference counts which were non-deterministic when multiple threads
are used. Now the lifetimes of anonymous attributes are handled
more explicitly and deterministically. This is a prerequisite for any kind
of caching, because caching the output of nodes that do things
non-deterministically and have "invisible inputs" (reference counts)
doesn't really work.
For more details for how deterministic lifetimes are achieved, see D16858.
No functional changes are expected. Small performance changes are expected
as well (within few percent, anything larger regressions should be reported as
bugs).
Differential Revision: https://developer.blender.org/D16858
Add `bNode::index()` to allow accessing node indices directly without
manually de-referencing the runtime struct. Also adds some asserts to
make sure the access is valid and to check the nodes runtime vector.
Eagerly maintain the node's index in the tree so it can be accessed
without relying on the topology cache.
Differential Revision: https://developer.blender.org/D16683
Using a cache greatly simplifies access to the output node.
I touched on the most common and understandable cases for me.
The texture nodes were touched because it looked pretty generic.
Differential Revision: https://developer.blender.org/D16699
This patch adds an integer identifier to nodes that doesn't change when
the node name changes. This identifier can be used by different systems
to reference a node. This may be important to store caches and simulation
states per node, because otherwise those would always be invalidated
when a node name changes.
Additionally, this kind of identifier could make some things more efficient,
because with it an integer is enough to identify a node and one does not
have to store the node name.
I observed a 10% improvement in evaluation time in a file with an extreme
number of simple math nodes, due to reduced logging overhead-- from
0.226s to 0.205s.
Differential Revision: https://developer.blender.org/D15775
This is not used for anything in practice currently. The original intention
was probably to generate different socket subtypes, but that is solved
differently now (e.g. using `NodeSocketFloatDistance`). It's possible
that an addon tried to use this but it's rather unlikely.
Differential Revision: https://developer.blender.org/D13188
The node level was an indication of how deep the node was in the tree.
It was only used for detecting link cycles. Now that the node topology
cache from 25e307d725 exists, this calculation can be removed
completely.
The level calculation was quadratic and very slow on larger node trees.
In the mouse house file with a few thousand nodes, it took 23ms on
every single update. Another benefit is storing slightly less runtime
data, though this was only 2 bytes per node.
Differential Revision: https://developer.blender.org/D16566
* This patch just moves runtime data to the runtime struct to cleanup
the dna struct. Arguably, some of this data should not even be there
because it's very use case specific. This can be cleaned up separately.
* `miniwidth` was removed completely, because it was not used anywhere.
The corresponding rna property `width_hidden` is kept to avoid
script breakage, but does not do anything (e.g. node wrangler sets it).
* Since rna is in C, some helper functions where added to access the
C++ runtime data from rna.
* This size of `bNode` decreases from 432 to 368 bytes.
This allows for optimizations because one does not have to iterate
over all nodes anymore to find all nodes within a frame.
Differential Revision: https://developer.blender.org/D16106
This is the conventional way of dealing with unused arguments in C++,
since it works on all compilers.
Regex find and replace: `UNUSED\((\w+)\)` -> `/*$1*/`
Muted nodes and reroutes can potentially affect the output when
they are linked to an input socket and don't have any inputs on
their own.
The issues was that previously "logically linked sockets" where used
which hide reroutes and muted nodes away. The solution is to work
with the directly linked sockets instead and handle reroutes etc
explicitly.
