This property was intended to affect fit method for added strips prior
to running operator. However UI team did not agree with current
implementation.
ref T84535
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D10055
All eevee scene properties are not animatable due to
`RNA_define_animate_sdna(false)` so there is no need for an animation
decorator here (would not show anyways).
Not sure if setting use_property_decorate to False and then manually
adding one again was a hack in rB7fc60bff14a6 to get the alignment
right, but seems to work good now without it.
Note: there also seems to be an inconsistency here generally:
- Eevee reserves room for an animation decorator in almost every panel
(except for "Sampling" and "Indirect Lighting") even though almost none
are animatable (except for stuff in "Hair" and "Film"). This looks nice
if multiple panels are expanded (except for mentioned "Sampling" and
"Indirect Lighting" -- maybe these should also reserve the room?)
- Cycles does not use animation decorators at all (even though pretty
much everything is animatable here -- maybe these should also use
animation decorators?)
- Then there is also the 'shared' "Grease Pencil", "Freestyle" and
"Colormanagement" -- these dont use animation decorators, but some stuff
is animatable...
Regarding the note: not sure what the guidelines here are, if this is
isolated to each panel then there is lots of stuff for eevee that could
set use_property_decorate to False, if multiple open panels are
considered (for nice visual consistency between them), then there is
romm for improvement elsewhere, too.
Maniphest Tasks: T81411
Differential Revision: https://developer.blender.org/D9164
The "repeat" property was turned off by default in rBf5080c82dd91, but
it's important to have repeat turned on for this operator since it can be
used to fill large areas. This commit is similar to rBaa77689f77b4.
Fixes T84531
The nodes were selected in new node groups because they are by default,
but there's no particular reason for them to be selected, and it can
be distracting.
Adding the modifier itself already adds a new node tree, which is
then displayed in the node editor because of the active object and
active modifier context. So there's no need to create the node tree
in the python code in this case.
Adjust default cache settings for all files to store raw and final
images.
All settings are still available when developer extras option is
enabled in user preferences.
This is part of design task T80278
Differential Revision: https://developer.blender.org/D9745
While using the Sample Weight tool in Weight Paint mode, user eyedropper mouse cursor.
Differential Revision: https://developer.blender.org/D9431
Reviewed by Pablo Vazquez
While using the Sample Weight tool in Weight Paint mode, show weight value in tool header.
Differential Revision: https://developer.blender.org/D9432
Reviewed by Pablo Vazquez
- Use the name "Point Cloud" instead of "Pointcloud"
- Fix a typo in UV_OT_smart_project.
- Use the name "Install Light" to for the installation
operator for MatCaps, HDRIs, and Studio Lights.
Fixes T83585, T65291, and T54921
Differential Revision: https://developer.blender.org/D9867
confirmation
Deleting keyframes in the dopesheet or graph editor always required
confirmation, even if used ouside of the "Delete" menus.
Now add a "confirm" option [same as for deleting objects], which can be
disabled for immediate keyframe deletion.
This will also change the default behavior and bring this in line with
how object deletion works so there is one shortcut for bringing up the
menu/confirmation and another shortcut to delete immediately without
requiring confirmation / another click:
- Blender Default keymap: "X" for menu, "Del" for immediate
- Industry Compatible: "Backspace" for menu, "Del" for immediate
Maniphest Tasks: T70316
Differential Revision: https://developer.blender.org/D9651
The property split layout was broken when the bone dialog appeared,
because the name field was not set. Theoretically property split should
work in this case, but it makes sense to use the label anyway.
Steps to reproduce:
1. Add clip to clip editor
2. Open the tracking settings & tracking settings extra panels
To fix this the sub panel is only drawn if a track is active.
The main panel will exit early and display a "No active track" message.
This is consistent with other panels in the clip editor.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D9727
This value really is the opacity, or the alpha, since a value of 1.0 means
that the image is fully visible, not invisible like "full transparency"
would suggest. Mistake in rBea4d28aea0343a.
Differential Revision: https://developer.blender.org/D9920
Try to detect if a given image may have valid alpha data or not (based
on number of channels and depth). This may be a bit doggy in theory, but
in practice it should cover most fields as expected. We can always
adjust the euristic here in other wrong cases appear.
This will affect all import add-ons using that node shader wrapper (at
least OBJ and FBX ones).
Having a centeral place to find a list of all library overrides should be
useful for managing production scenes where library overrides are used a lot.
This change adds the individually overridden properties of a data-block under
the data-block itself. Just how we show modifiers, constraints or pose channels
there. This way we can also expose library override operations/options better
in future.
There's also a filter option for the library overrides now, so they can be
hidden. It is only available in the View Layer display mode though, like the
other filter options.
One internal change this has to do is adding more informative return values to
undo pushes and the library override functions called by it. That way we can
send a notifier when library overrides change for the Outliner to know when to
rebuild the tree.
Differential Revision: https://developer.blender.org/D7631
Reviewed by: Andy Goralczyk, Bastien Montagne, William Reynish
In some operators that previously allowed duplicating the selected data-block,
the operator would not be available now. 2250b5cefe split the "new" operators
into "new" and "delete" to allow clearly differentiating between the two. But I
apparently didn't amend all affected data-block selectors to use the added
"duplicate" operators.
I went over all operators that were split now and made sure all affected
data-block selectors are updated.
Approximately 138 changes in the spelling of compound words
and proper names like "Light Probe", "Shrink/Fatten", "Face Map".
In many cases, hyphens were used where they aren't correct, like
"re-fit". Other common changes include:
- "Datablock" -> "data-block"
- "Floating point" -> "floating-point"
- "Ngons" -> "n-gons"
These changes help give the language used in the interface
a consistent, more professional feel.
Differential Revision: https://developer.blender.org/D9923
Approximately 195 changes of capitalization to conform to MLA title style.
UI labels and property names should use MLA title case, while descriptions
should be capitalized like regular prose, generally with only the start of
a sentence capitalized.
Differential Revision: https://developer.blender.org/D9922
This node updates the "rotation" attribute on points.
Multiple ways to specify the rotation are supported.
Differential Revision: https://developer.blender.org/D9883
Ref T83668.
Mainly updated the Mantaflow version. It includes the new viscosity solver plugin based on the method from 'Accurate Viscous Free Surfaces for Buckling, Coiling, and Rotating Liquids' (Batty & Bridson).
In the UI, this update adds a new 'Viscosity' section to the fluid modifier UI (liquid domains only). For now, there is a single 'strength' value to control the viscosity of liquids.
This adds a popover to the properties editor. Currently the only setting
is for controlling outliner to properties syncing.
Because we cannot define a perfect heuristic to determine when
properties editors should change tabs based on outliner icon selection,
we need an option to enable or disable this behavior per properties
editor.
There are 3 options for controlling the syncing. Auto uses the heuristic
to only allow tab switching when a properties editor and outliner share
a border. On and off enable and disable syncing respectively.
Differential Revision: https://developer.blender.org/D9758
Normally, pure text buttons have no padding at their edges so they
align with edges of buttons, see D9058. However, in several cases
there are labels aligned to the right side of a list widget row,
so they're missing padding against the right edge.
The fix is to use emboss = 'NONE' for such labels, which changes
the drawing style, adding padding on the right edge. (Normally so
labels aligned with the text from non-embossed buttons). This is
not necessarily intended, but it works properly.
For more information, see the revision.
Differential Revision: https://developer.blender.org/D9874
This value was meant to be used for keeping images that are slowest to
render in cache. Method of measurement was flawed, because it doesn't
take UI overhead into consideration.
Cache panel is to be removed because users should not have to tweak
settings like this. It is not useful for development either, therefore
it is removed completely.
Previously, the Annotation panels were a bit buggy in the movie clip editor.
This commit fixes the issue of the panel in the sidebar would disappear
when selecting "Tracks" if no tracks were added to the clip.
To solve this issue the user if given a label text saying "No annotation source"
This commit also removes some grease pencil operators from the toolbar
that do not work with the new annotation system.
This commit also moves the data source choice from the toolbar to the sidebar.
This is needed to migrate the current toolbar to the new tool system
(see T83612)
Some old invalid code was also removed.
Reviewed By: #grease_pencil, antoniov
Differential Revision: https://developer.blender.org/D9729
This new node increases the radiance of an image by a scalar value.
Previously, the only way to adjust the the exposure of an image was with
math node or using the scene's color management.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D9677
This bug was caused by making it so that non-embossed modifier icon
buttons could become an operator button and retain their red highlight
for disabled modifiers. The icon button needs emboss turned off, but
in earlier versions of Blender, `UI_EMBOSS_NONE` would be overridden
by animation or red alert states.
Instead of abusing "NONE" to mean "none unless there is animation or
red alert", this commit adds a new emboss flag for that situation,
`UI_EMBOSS_NONE_OR_STATUS`, which uses no emboss unless there is an
animation state, or another status. There are only a few situations
where this is necessary, so the change isn't too big.
Differential Revision: https://developer.blender.org/D9902
The previous design is rather old and has a couple of problems:
* Scalability: The current solution of adding little icon buttons next to the
data-block name field doesn't scale well. It only works if there's a small
number of operations. We need to be able to place more items there for better
data-block management. Especially with the introduction of library overrides.
* Discoverability: It's not obvious what some of the icons do. They appear and
disappear, but it's not obvious why some are available at times and others
not.
* Unclear Status: Currently their library status (linked, indirectly linked,
broken link, library override) isn't really clear.
* Unusual behavior: Some of the icon buttons allow Shift or Ctrl clicking to
invoke alternative behaviors. This is not a usual pattern in Blender.
This patch does the following changes:
* Adds a menu to the right of the name button to access all kinds of operations
(create, delete, unlink, user management, library overrides, etc).
* Make good use of the "disabled hint" for tooltips, to explain why buttons are
disabled. The UI team wants to establish this as a good practise.
* Use superimposed icons for duplicate and unlink, rather than extra buttons
(uses less space, looks less distracting and is a nice + consistent design
language).
* Remove fake user and user count button, they are available from the menu now.
* Support tooltips for superimposed icons (committed mouse hover feedback to
master already).
* Slightly increase size of the name button - it was already a bit small
before, and the move from real buttons to superimposed icons reduces usable
space for the name itself.
* More clearly differentiate between duplicate and creating a new data-block.
The latter is only available in the menu.
* Display library status icon on the left (linked, missing library, overridden,
asset)
* Disables "Make Single User" button - in review we weren't sure if there are
good use-cases for it, so better to see if we can remove it.
Note that I do expect some aspects of this design to change still. I think some
changes are problematic, but others disagreed. I will open a feedback thread on
devtalk to see what others think.
Differential Revision: https://developer.blender.org/D8554
Reviewed by: Bastien Montagne
Design discussed and agreed on with the UI team, also see T79959.
Ref: T82651
Normally people use "Combine XYZ" to input a vector, but it is more
interesting to have an explicit vector input.
So this is basically "Combine XYZ" without any input sockets, the values
are stored in the node itself.
Differential Revision: https://developer.blender.org/D9885
Fix Euler discontinuities in the Bake Action operator, by explicitly
using the previous Euler angles when converting from matrix to rotation.
This basically follows the same approach as used in e4ca1fc4ea, although
the Euler Discontinuity Filter also performs single-channel filtering which
the Bake Action operator doesn't.
Expand abbreviations for words like "Bright" (instead of "Brightness"),
"Premul", "Lib", "Dir", etc.
Differential Revision: https://developer.blender.org/D9862
This patch adds two related nodes, a node for separating points
and mesh vertices based on a boolean attribute input, and a node
for creating boolean attributes with comparisons.
See the differential for an example file and video.
Point Separate (T83059)
The output in both geometries is just point data, contained in the mesh
and point cloud components, depending which components had data in the
input geometry. Any points with the mask attribute set to true will be
moved from the first geometry output to the second. This means that
for meshes, all edge and face data will be removed. Any point domain
attributes are moved to the correct output geometry as well.
Attribute Compare (T83057)
The attribute compare does the "Equal" and "Not Equal" operations by
comparing vectors and colors based on their distance from each other.
For other operations, the comparison is between the lengths of the
vector inputs. In general, the highest complexity data type is used
for the operation, and a new function to determine that is added.
Differential Revision: https://developer.blender.org/D9876
This simple change sets the call_panel operator's "keep_open" property
to True for the viewport snapping panel called with `ctrl-shift-tab`.
There are quite a few settings in this panel, it often makes sense to
change more than one of them at a time, especially because multiple
snap elements can be active at the same time.
This commit resolves problem introduced in e1665c3d31 - it was
difficult to import media at their original resolution.
This is done by using original resolution as reference for scale.
All crop and strip transform values and their animation is converted
form old files.
To make both workflows easy to use, sequencer tool settings have been
created with preset for preffered scaling method. This setting is in
sequencer timeline header and add image or movie strip operator
properties.
Two new operators have been added:
`sequencer.strip_transform_fit` operator with 3 options: Scale To Fit,
Scale to Fill and Stretch To Fill.
Operator can fail if strip image or video is not loaded currently, this
case should be either sanitized or data loaded on demand.
`sequencer.strip_transform_clear` operator with 4 options:
Clear position, scale, rotation and all (previous 3 options combined).
Reviewed By: sergey, fsiddi
Differential Revision: https://developer.blender.org/D9582
This tool implements smearing for multires displacement over the limit
surface, similar to how smearing for colors and topology slide works.
When used the displacement values of the vertices "slide" over the
topology, creating the effect of smearing the surface detail.
As the brush just modifies displacement values instead of coordinates,
the total displacement of the affected area doesn't change. This means
that this smearing effect can be used multiple times over the same area
without generating any artifacts in the topology.
When the brush is used with the pinch or expand smear modes,
displacement differences are pushed into the same area, creating hard
surface effects without pinching the topology.
As any other brush that relies on the limit surface (like displacement
erasers), this will work better after using apply base.
Reviewed By: sergey, JulienKaspar, dbystedt
Differential Revision: https://developer.blender.org/D9659
