Instead of switch statements, make use of generic virtual arrays
so the code is shorter and easier to read.
Differential Revision: https://developer.blender.org/D12908
The old code only worked when built-in nodes are only unregistered
at most once while Blender is running. However, this is not the case
when running certain unit tests such as `AbstractHierarchy*`
in `blender_test`.
Found by Sybren, thanks.
On GCC in release mode (and maybe also debug mode without ASAN enabled),
allocating an `AssetLibraryService` will reuse the space that should
have just been freed. This made a test fail, as it was testing that new
memory was allocated and not some old instance reused.
To ensure that the calls that should allocate a new block of memory
return a unique pointer, I added some dummy allocation to the test.
No functional changes to Blender
Previously, every node had its own declaration. This isn't ideal, because
it's often the case that all nodes of the same type have the same declaration.
That's the case for all nodes using declarations currently. It will not be true
for e.g. group nodes in the future.
Sharing node declarations between nodes makes it a bit more efficient.
Differential Revision: https://developer.blender.org/D12898
Add `blender::bke::AssetLibraryService` class that acts like a
blendfile-scoped singleton. It's allocated upon the first call to
`BKE_asset_library_load` and destroyed in the LOAD-PRE handler.
The `AssetLibraryService` ensures that edits to asset catalogs are not
lost when the asset browser editor closes (or even reloads). Instead,
the `AssetLibrary` pointers it owns are kept around as long as the blend
file is open.
Reviewed By: Severin
Maniphest Tasks: T92151
Differential Revision: https://developer.blender.org/D12885
The Endpoint Selection node allows for the Selection of an aribitrary
number of endpoints from each spline in a curve. The start and end
inputs are evaluated on the spline domain. The result is outputted
as a boolean field on the point domain.
Differential Revision: https://developer.blender.org/D12846
This does not change the behavior when there are no mistakes in the node tree.
The visualization does change when a field is connected to an input that cannot
be a field.
Differential Revision: https://developer.blender.org/D12877
Issue was caused by adding `seq->sound` check in ded68fb102 in
function `BKE_sound_scene_add_scene_sound` as `offset_time` field was
introduced to resolve sub-frame a/v misalignment.
Scene strips don't have `bSound` allocated but also don't suffer from
a/v misalignment.
Remove `seq->sound` check and don't apply any offset for scene strips.
Reviewed By: zeddb, sergey
Differential Revision: https://developer.blender.org/D12819
Replaces the old Subdivision Surface Node.
Changes:
- Removes implicit instance realization, instead the node runs once
per unique instance.
- "Use Creases" becomes a crease field input applied to edges.
The values are clamped between zero and one.
Addresses T91763
Differential Revision: https://developer.blender.org/D12830
The object info node output an instance as a performance optimization.
Before that optimization was (almost) invisible to the user, but now
that we aren't automatically realizing instances, it isn't intuitive
for a single object to become an instance.
I refactored the transform node so its ability to translate/transform
an entire geometry set was more usable from elsewhere and exposed the
function to get a geometry set from an object.
Differential Revision: https://developer.blender.org/D12833
This commit adds an updated version of the old attribute transfer node.
It works like a function node, so it works in the context of a
geometry, with a simple data output.
The "Nearest" mode finds the nearest element of the specified domain on
the target geometry and copies the value directly from the target input.
The "Nearest Face Interpolated" finds the nearest point on anywhere on
the surface of the target mesh and linearly interpolates the value on
the target from the face's corners.
The node also has a new "Index" mode, which can pick data from specific
indices on the target geometry. The implicit default is to do a simple
copy from the target geometry, but any indices could be used. It is also
possible to use a single value for the index to to retrieve a single
value from an attribute at a certain index.
Differential Revision: https://developer.blender.org/D12785
Avoiding creating empty components can be a hassle for code that
interacts with a geometry set. One easy way to do that was calling
the functions that retrieved mutable access to geometry data directly,
like get_mesh_for_write. This commit makes it so that sort of direct
function does not create an empty component if there is no data.
Another way to create an empty component was calling the replace_*
methods with a null pointer. It's more convenient to have a nice API
that handles those cases without creating an empty component.
It's still convenient that the regular get_component_for_write adds
the component if it doesn't exist, because that's often a nice way to
add data to the geometry set.
Differential Revision: https://developer.blender.org/D12862
This commit adds a fields version of the mesh to curve node, with a
field for the input selection. In order to reduce code duplication,
it adds the mesh to curve conversion to the new geometry module
and calls that implementation from both places.
More details on the geometry module can be found here: T86869
Differential Revision: https://developer.blender.org/D12579
The Alembic/CacheFile modifier supports Cycles procedurals when Cycles
is configured to use experimental features; the check for this would
segfault on builds with `WITH_CYCLES=OFF`. This is now fixed by adding
an extra NULL check.
This changes the edge split node to have a selection input, which is
more aligned with the other design changes. This loses the ability to
split edges based on an angle, but the edge angle can be added as a
field input node in the future, which will make for a much more
flexible system.
Differential Revision: https://developer.blender.org/D12829
Adds a node that can rotate each of a geometry's instances in global
(to the modifier object) or local space (of each point) by a specified
angle around a pivot point.
In the future, separating the local-global choice for the pivot and the
rotation might be useful. However, for now the node is kept simple.
Differential Revision: https://developer.blender.org/D12682
Adds a node that can scale a geometry's instances. With "Local" turned
on, the instance is scaled individually from the center point input,
while when local space is turned off, it's more like the transform
node, except it scales outward from the center point instead of only
from the origin.
Differential Revision: https://developer.blender.org/D12681
Adds a node that can translate instances in the transform space of
the modifier object, or the local space of their original transform.
One reason to have a special node for instances is that they always
have the existing transform, unlike mesh or point cloud points.
Differential Revision: https://developer.blender.org/D12679
When assigning a new catalog ID to an asset, also refresh the "catalog
simple name". This "simple name" is stored on the asset metadata next to
the catalog UUID, to allow some emergency data recovery when the catalog
definition file is somehow lost.
Since `AssetCatalogPath` isn't default constructible (unlike the
previous `CatalogPath`, alias `std::string`), `AssetCatalog` isn't
default constructible either. But its default constructor is declared
with `= default` which Apple Clang was warning about.
Differential Revision: https://developer.blender.org/D12714
Reviewed by: Sybren Stüvel
Ensure that catalog operations create an undo snapshot, and show
undo/redo operators in the asset browser.
A hidden operator `ASSET_OT_catalog_undo_push` is also added such that
add-ons can also set undo snapshots if they need.
Rename `bke::AssetCatalogService::store_undo_snapshot` to `undo_push`.
This makes the function named the same way as the global Blender "undo
push" function.
No functional changes.
Add an undo stack for catalog edits. This only implements the backend,
no operators or UI yet.
A bunch of `this->xxx` has been replaced by `catalog_collection_->xxx`.
Things are getting a bit long, and the class is turning into a god
object; refactoring the class is tracked in T92114.
Reviewed By: Severin
Maniphest Tasks: T92047
Differential Revision: https://developer.blender.org/D12825
Recursively delete asset catalogs with `AssetCatalogService:prune_...`
functions. This deletes the catalog and all of its children.
The old `delete_catalog` function has been renamed to
`delete_catalog_by_id()`, and is now a lower-level function (no deletion
of children, no rebuilding of the tree). The `prune_catalogs_by_path()`
and `prune_catalogs_by_id()` do delete children and do rebuild the
catalog tree.
Manifest task: T91634
Simplify the testing code that verifies the asset catalog tree. It now
prints clearer error messages when things go wrong, and it gets simpler
data to test (instead of having to explicitly pass the parent count, it
just counts the number of separators in the expected path).
No functional changes to Blender.
Introduces `BKE_appdir_folder_caches` to get the folder that
can be used to store caches. On different OS's different folders
are used.
- Linux: `~/.cache/blender/`.
- MacOS: `Library/Caches/Blender/`.
- Windows: `(%USERPROFILE%\AppData\Local)\Blender Foundation\Blender\Cache\`.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12822
This commit implements T91780, adding nodes to get and set builtin
attributes. Individual set nodes are used so that the values can be
exposed for direct editing, which is useful for attributes like shade
smooth and spline resolution. Individual input nodes are used to allow
reusing nodes for multiple components, and to allow grouping multiple
outputs conceptually in the same node in the future.
Input Nodes
- Radius
- Curve Tilt
- Curve Handle Positions
- Is Shade Smooth
- Spline Resolution
- Is Spline Cyclic
'Set' Nodes
- Curve Radius
- Point Radius
- Curve Tilt
- Curve Handle Positions
- Is Shade Smooth
- Spline Resolution
- Is Spline Cyclic
Using hardcoded categories is necessary to add separators to the node
menu.
Differential Revision: https://developer.blender.org/D12687
Delete Geometry:
This adds a copy of the old node in the legacy folder and updates the
node to work with fields. The invert option is removed, because it is
something that should be very easy with fields, and to be consistent
with other nodes which have a selection. There is also a dropdown to
select the domain, because the domain can't be determined from the
field input. When the domain does not belong on any of the components
an info message is displayed.
Separate Geometry:
A more general version of the old Point Separate node. The "inverted"
output is the same as using the delete geometry node.
Differential Revision: https://developer.blender.org/D12574
This commit introduces the Align Euler to Vector function node which
rotates to a body into a given direction. The node replaces the legacy
"Align Rotation to Vector" node, which only worked on an attribute
named `rotation` internally. The "Euler" in the name is meant to make
it clearer that the rotation isn't interchangeable with a regular
vector.
Addresses T91374.
Differential Revision: https://developer.blender.org/D12726
This bug was introduced in D12190 because the list of types that support materials did not include GPencil and this caused all materials to be removed after they were created during conversion.
Moved function definitions around so that all members of a class are
next to each other. Previously some functions of one class were sitting
between functions of another class.
No functional changes.
