See #105317
In 46cf093270, face maps were just converted to an integer
attribute. While the internal data remains the same that way, we lose
the names and some convenient methods of interaction. This commit
additionally converts each face map to a separate boolean attribute
using the old name. This does require that no attributes were using that
name already.
Each boolean attribute can be thought of as a selection, accessible in
geometry nodes and properly interpolated by mesh processing
algorithms. The selections no longer have to be unique, meaning
one face can be part of multiple selections.
Pull Request: https://projects.blender.org/blender/blender/pulls/113769
Copy custom data and flag from the original edge to the ones created
from it when splitting a long edge.
Unfortunately, can not use generic "example" edge approach as there
is a temporary flag BM_ELEM_TAG is re-applied in a loop: the new
edges can not be tagged with this tag. Additional complication is
that even we clear this tag from the input edge before splitting it
this tag is re=applied via long_edge_queue_face_add().
Hence, use our own simple function to copy minimal subset of data and
tags.
Co-Authored-By: Hans Goudey <hans@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/113783
- More consistent naming of variables in diagram and code.
- Use C++ array and span, and make them short-lived, without
trying to reuse them.
Co-Authored-By: Hans Goudey <hans@blender.org>
This was the last use of `CustomDataAttributes`. It's not very useful
nowadays because we have a lower level (`CustomData`) and higher level
(`AttributeAccessor`) API.
As part of this I removed the ability to `reserve` instances which was
useful when adding instances one by one. Generally, such code should
eventually be rewritten to handle more instances at once, instead of
handling them one by one. This will lead to better performance and
is more in line with how other geometry types (like mesh) are handled.
This also adds the ability to move and assign `Instances` just like we can
move and assign `CurvesGeometry`.
Before bd00324c26, strip lengths were changed in
`rna_NlaStrip_frame_start_ui_set` and `rna_NlaStrip_frame_end_ui_set`
so as not to be shorter than NLASTRIP_MIN_LEN_THRESH.
This prevented `BKE_nlameta_flush_transforms` from working with
zero-length strips.
But now, in some cases, strip can be zero length.
Therefore, consider this case and avoid division by zero.
Pull Request: https://projects.blender.org/blender/blender/pulls/110121
This helps solving the problem encountered in #113553. The problem is that we
currently can't support link-drag-search for nodes which have a dynamic declaration.
With this patch, there is only a single `declare` function per node type, instead of
the separate `declare` and `declare_dynamic` functions. The new `declare` function
has access to the node and tree. However, both are allowed to be null. The final
node declaration has a flag for whether it depends on the node context or not.
Nodes that previously had a dynamic declaration should now create as much of
the declaration as possible that does not depend on the node. This allows code
like for link-drag-search to take those sockets into account even if the other
sockets are dynamic.
For node declarations that have dynamic types (e.g. Switch node), we can also
add extra information to the static node declaration, like the identifier of the socket
with the dynamic type. This is not part of this patch though.
I can think of two main alternatives to the approach implemented here:
* Define two separate functions for dynamic nodes. One that creates the "static
declaration" without node context, and on that creates the actual declaration with
node context.
* Have a single declare function that generates "build instructions" for the actual
node declaration. So instead of building the final declaration directly, one can for
example add a socket whose type depends on a specific rna path in the node.
The actual node declaration is then automatically generated based on the build
instructions. This becomes quite a bit more tricky with dynamic amounts of sockets
and introduces another indirection between declarations and what sockets the node
actually has.
I found the approach implemented in this patch to lead to the least amount of
boilerplate (doesn't require a seperate "build instructions" data structure) and code
duplication (socket properties are still only defined in one place). At the same time,
it offers more flexibility to how nodes can be dynamic.
Pull Request: https://projects.blender.org/blender/blender/pulls/113742
Previously the first group of deform modifiers didn't need to access
original coordinates explicitly because the deformation wasn't included
in the mesh positions. After d20f992322 the mesh is deformed
directly though, so the original coordinates need to be added first.
In the case of this report, the particle system (which is a "deform"
modifier for reasons) didn't have original coordinates to work with, so
it created the child particles at the deformed positions from the shape
keys every time. Though for some reason it only did that for renders.
Pull Request: https://projects.blender.org/blender/blender/pulls/113679
The goal of this patch is to allow us to use dynamic node declarations
for various nodes in a future version without breaking forward compatibility.
The same kind of change should be added to Blender 3.6.
The code added here is not supposed to end up in `main`, so it has to be
removed when merging the release branch.
Pull Request: https://projects.blender.org/blender/blender/pulls/113497
No functional changes
Make the code more readable by doing the following
* rename `BKE_keyingset_free` to `BKE_keyingset_free_paths` since that is what it does
* invert `if` and return early to reduce indentation
* add enum value `MODIFYKEY_SUCCESS` to explicitly state the return value, instead of eModifyKey_Returns(0)
* return `INSERTKEY_NOFLAGS` instead of eInsertKeyFlags(0)
* move variables closer to their usage
Pull Request: https://projects.blender.org/blender/blender/pulls/113666
This commit makes using (most of) `BKE_report` API safe in
multi-threaded situation.
This is achieved by adding a `std::mutex` lock to the `ReportList`
struct (in a slightly convoluted way unfortunately, due to this being a
DNA struct). This lock is then used to make most operations on
`Reportlist` data thread-safe.
Note that while working on this, a few other minor issues aroze in
existing usages of Reportlist by the WM code, mainly the fact that
`wm_init_reports` and `wm_free_reports` were both useless:
- init was called in a context where there is not yet any WM, so it
was doing nothing.
- free was called on a WM that would be later freed (as part of Main
freeing), which would also call cleanup code for its `reports` data.
Both have been removed.
Further more, `wm_add_default` (which is the only place where a WM ID is
created) did not initialize properly it reports data, this has been
fixed.
This change is related to the wmJob thread-safety tasks and PRs (#112537,
!113548).
Pull Request: https://projects.blender.org/blender/blender/pulls/113561
Significantly reduce the amount of manual memory management by
replacing owning pointers with `blender::Array`. This also simplifies
counting the size of the undo steps and iterating over the array values
in some cases.
Continue allowing spacebar search for all dropdown and context menus,
but also add the ability to allow some menus to have type to search,
like Add Modifiers, Objects, Nodes.
Pull Request: https://projects.blender.org/blender/blender/pulls/113520
In !112591, nodes got the ability to group sockets into panels. The
labels for these sockets are automatically shortened if they begin
with the same text as their parent labels. For instance, "Transmission
Weight" will be shortened to just "Weight" because it is under the
"Transmission" panel.
While this is a good heuristic for English, it breaks down in
languages which do not have the same word order.
This commit adds a `.short_label()` callback to socket declarations so
that a shortened label can be explicitly declared.
It also adds two regexps to the translation script so that these new
fields can be extracted to the .po translation files. One extracts the
label with a translation context, the other without. Only the one
without context is currently in use.
The current automatic shortening logic is kept and will be used only
if a shortened label is not manually provided.
Fixes#112970: Node socket labels under panels are not shortened when
translated.
Pull Request: https://projects.blender.org/blender/blender/pulls/113070
This adds `GreasePencilEditHints` and correctly implements
`crazyspace::get_evaluated_grease_pencil_drawing_deformation`
to support querying the deformation of points after evaluation.
This is needed for users to properly select points in edit mode while
seeing the effects of the modifiers.
Pull Request: https://projects.blender.org/blender/blender/pulls/113586
This is already separated per PBVH type, we can make use of that
to simplify the loops for the types with the aim of sharing code in
a simpler and more performance-friendly way. Ideally this could
be written as `array_utils::scatter`, but we don't have that utility
function now, so just write the raw loop for now.
In order to recreate the behavior of some builtin nodes
which have implicit inputs for ID/Index or positions, provide
a hard-coded list of default/unconnected fields for sockets.
The point is to let assets recreate the behavior of builtin
nodes in a simple way that's easy to change in the future if
this becomes a more generalized feature. A hardcoded list
makes this predictable and simple in the meantime.
When the option is set to something besides "Default Value"
it overrides the "Hide Value" option. Otherwise the default
input would conflict with the visible default value button.
This makes it possible to add #109846 as an asset in the
essentials bundle. The design is meant to be easily
extendable for shader nodes, though that isn't included
in this commit.
Pull Request: https://projects.blender.org/blender/blender/pulls/113175
We had a short discussion on this change. "Grease Pencil Layer" is
just a bit too long, especially in the UI. Even though "Layer" might be
ambiguous, it shouldn't be in the context of geometry nodes. There are
currently no other "Layers" and if there were, using the same domain
name could be fine (just like we reuse the point domain for e.g. vertices
in meshes and control points in curves).
This also renames the internal enum to `ATTR_DOMAIN_LAYER`
Pull Request: https://projects.blender.org/blender/blender/pulls/113589
Update to the new naming convention for `Light Probes`:
`Reflection Cubemap` -> `Sphere`
`Reflection Plane` -> `Plane`
`Irradiance Grid` -> `Volume`
Note that this breaks the Python API (`bpy.types.LightProbe.type`).
Pull Request: https://projects.blender.org/blender/blender/pulls/113452
The issue was that custom data layers were modified without checking
that the data was not shared. Now the data is unshared first.
I also added an assert to catches this kind of issue more directly.
Pass the mesh to the drawing functions so it doesn't have to be
retrieved from the PBVH. It's nice to rely less on the PBVH `me`
pointer, since it's a fairly ugly "back pointer" which isn't necessarily
good design.
