- Use const and whitespace more consistently
- Fix "Offset Valid" output only working on point domain
- Use the smallest output array that can contain the result.
- Consistent include ordering
- Use "data-block" term instead of "object" in tooltip
- Remove unnecessary call to set default output values
This node allows access to the indices of neighboring control points
within a curve via an offset. This includes taking into consideration
curves that are cyclic.
Differential Revision: D13373
Previously, all implicit inputs where stored in a centralized place.
Now the information which nodes have which implicit inputs is
stored in the nodes directly.
This patch replaces the existing transfer attribute node with three
nodes, "Sample Nearest Surface", "Sample Index", and "Sample Nearest".
This follows the design in T100010, allowing for new nodes like UV
sampling in the future. There is versioning so the new nodes replace
the old ones and are relinked as necessary.
The "Sample Nearest Surface" node is meant for the more complex
sampling algorithms that only work on meshes and interpolate
values inside of faces.
The new "Sample Index" just retrieves attributes from a geometry at
specific indices. It doesn't have implicit behavior like the old
transfer mode, which should make it more predictable. In order to not
change the behavior from existing files, the node has a has a "Clamp",
which is off by default for consistency with the "Field at Index" node.
The "Sample Nearest" node returns the index of the nearest element
on a geometry. It can be combined with the "Sample Index" node for
the same functionality as the old transfer node. This node can support
curves in the future.
Backwards compatibility is handled by versioning, but old versions can
not understand these nodes. The warning from 680fa8a523 should make
this explicit in 3.3 and earlier.
Differential Revision: https://developer.blender.org/D15909
Using the attribute name semantics from T97452, this patch moves the
selection status of mesh elements from the `SELECT` of vertices, and
edges, and the `ME_FACE_SEL` of faces to generic boolean attribute
Storing this data as generic attributes can significantly simplify and
improve code, as described in T95965.
The attributes are called `.select_vert`, `.select_edge`, and
`.select_poly`. The `.` prefix means they are "UI attributes",so they
still contain original data edited by users, but they aren't meant to
be accessed procedurally by the user in arbitrary situations. They are
also be hidden in the spreadsheet and the attribute list.
Until 4.0, the attributes are still written to and read from the mesh
in the old way, so neither forward nor backward compatibility are
affected. This means memory requirements will be increased by one byte
per element when selection is used. When the flags are removed
completely, requirements will decrease.
Further notes:
* The `MVert` flag is empty at runtime now, so it can be ignored.
* `BMesh` is unchanged, otherwise the change would be much larger.
* Many tests have slightly different results, since the selection
attribute uses more generic propagation. Previously you couldn't
really rely on edit mode selections being propagated procedurally.
Now it mostly works as expected.
Similar to 2480b55f21
Ref T95965
Differential Revision: https://developer.blender.org/D15795
This is very similar to D14077. There are two differences though.
First is that vertex creases are already stored in a separate layer,
and second is that we can now completely remove use of `Mesh.cd_flag`,
since that information is now inherent to whether the layers exist.
There are two functional differences here:
* Operators are used to add and remove layers instead of a property.
* The "crease" attribute can be created and removed by geometry nodes.
The second change should make various geometry nodes slightly faster,
since the "crease" attribute was always processed before. Creases are
now interpolated generically in the CustomData API too, which should
help maintain the values across edits better.
Meshes get an `edge_creases` RNA property like the existing vertex
property, to provide more efficient access to the data in Cycles.
One test failure is expected, where different rounding between float
the old char storage means that 5 additional points are scattered in
a geometry nodes test.
Differential Revision: https://developer.blender.org/D15927
From the nodes' description: "Retrieve the object that contains
the geometry nodes modifier currently being executed". This was
discussed in the most recent geometry nodes module meeting.
Because the node allows you to retrieve the position of the modifier
object, it has to add a depsgraph relation to object transform.
Expect that modifiers will be reevaluated when moving the object.
In the future, better static analysis of node trees could make this
check smarter.
Differential Revision: https://developer.blender.org/D16037
The typed "lookup_or_add_for_write_only" function is meant to do the
same thing as the non-typed version of the function. Instead, it still
initialized values of new attribute arrays, which isn't meant to happen.
Missed in 4c91c24bc7.
I also had to correct one place that used the "write_only"
function but didn't intialize all values.
Sorry, this was working before I rebased. I believe the warning was
fixed and the rebase still applied.
The commit as it was introduced building problems
This reverts commit ae21319d7f.
In large node setup the threading overhead was sometimes very significant.
That's especially true when most nodes do very little work.
This commit improves the scheduling by not using multi-threading in many
cases unless it's likely that it will be worth it. For more details see the comments
in `BLI_lazy_threading.hh`.
Differential Revision: https://developer.blender.org/D15976
This commit adds a node to distribute points inside of volume grids.
The "Random" mode usese OpenVDB's "point scatter" implementation, and
there is also a "Grid" mode for uniform distributions. Both methods
operate on all of the float grids in the volume, using every voxel with
a value higher than the threshold. The random method is not stable as
the input volume deforms.
Based on a patch by Angus Stanton (@abstanton), which was based on a
patch by Kenzie (@kenziemac130).
Differential Revision: https://developer.blender.org/D15375
`CurveEval` was added for the first iteration of geometry nodes curve
support. Since then, it has been replaced by the new `Curves` type
which is designed to be much faster for many curves and better
integrated with the rest of Blender. Now that all curve nodes have
been moved to use `Curves` (T95443), the type can be removed,
along with the corresponding geometry component.
This is the last node to use the `CurveEval` type. Since the curve to
points node is basically the same as the resample node, now it just
reuses the resample code and moves the curve point `CustomData` to a
new point cloud at the end. I had to add support for sampling tangents
and normals to the resampling.
There is one behavior change: If the radius attribute doesn't exist,
the node won't set the radius to 1 for the output point cloud anymore.
Instead, the default radius for point clouds will be used.
That issue was similar to T99814.
Differential Revision: https://developer.blender.org/D16008
With the recent addition of the UV unwrapping node, there is a need to
be able to create seams easily. This node does that by outputting a
selection of the boundaries between different input face sets. In the
context of UV mapping, one inputs the "patches" you want, and the node
gives you the seams needed to make those patches.
Differential Revision: https://developer.blender.org/D15423
Add new functions to `array_utils` namespace called `gather(..)`.
Versions of `GVArray::materialize_compressed_to_uninitialized(..)` with
threading have been reimplemented locally in multiple geometry node
contexts. The purpose of this patch is therefore to:
* Assemble these implementations in a single file.
* Provide a naming convention that is easier to recognize.
Differential Revision: https://developer.blender.org/D15786
We expect some builtin attributes to have positive values or values
within a certain range, but currently there some cases where users
can set attributes to arbitrary values: the store named attribute node,
and the output attributes of the geometry nodes modifier. The set
material index node also needs validation.
This patch adds an `AttributeValidator` to the attribute API, which
can be used to correct values from these untrusted inputs if necessary.
As an alternative to D15548, this approach makes it much easier to
understand when validation is being applied, without the need to add
arguments to every attribute API method or complicate the virtual
array system.
Currently validation is provided with a multi-function. That integrates
well with the field evaluations that set these values now, but it could
be wrapped to be friendlier to other areas of Blender in the future.
The Python API is not handled here either. Currently I would prefer to
wait until we can integrate the C++ and C attribute APIs better before
addressing that.
Fixes T100952
Differential Revision: https://developer.blender.org/D15990
This reduces logging overhead. The performance difference is only
significant when there are many fast nodes. In my test file with many
math nodes, the performance improved from 720ms to 630ms.
The new evaluator crashes for multi-input sockets coming from undefined
nodes. The multi-input socket lazy node tries to retrieve the default
value since the undefined node never created output values. But there
is no default value stored because the socket is linked.
Differential Revision: https://developer.blender.org/D15980
Sun Disc is currently not supported because it'll need special handling - on the one hand, I'm not sure if Eevee would handle a 1e6 coming out of a background shader without issues, and on the other hand it won't actually cast sharp shadows anyways.
I guess we'd want to internally add a sun to the lamps if Sun Disc is enabled, but getting that right is tricky since the user could e.g. swap RGB channels in the node tree and the lamp wouldn't match that.
Anyways, that can be handled later, the sky itself is already a start.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D13522
When a change happens which invalidates view layers the syncing will be postponed until the first usage.
This will improve importing or adding many objects in a single operation/script.
`BKE_view_layer_need_resync_tag` is used to tag the view layer to be out of sync. Before accessing
`BKE_view_layer_active_base_get`, `BKE_view_layer_active_object_get`, `BKE_view_layer_active_collection`
or `BKE_view_layer_object_bases` the caller should call `BKE_view_layer_synced_ensure`.
Having two functions ensures that partial syncing could be added as smaller patches in the future. Tagging a
view layer out of sync could be replaced with a partial sync. Eventually the number of full resyncs could be
reduced. After all tagging has been replaced with partial syncs the ensure_sync could be phased out.
This patch has been added to discuss the details and consequences of the current approach. For clarity
the call to BKE_view_layer_ensure_sync is placed close to the getters.
In the future this could be placed in more strategical places to reduce the number of calls or improve
performance. Finding those strategical places isn't that clear. When multiple operations are grouped
in a single script you might want to always check for resync.
Some areas found that can be improved. This list isn't complete.
These areas aren't addressed by this patch as these changes would be hard to detect to the reviewer.
The idea is to add changes to these areas as a separate patch. It might be that the initial commit would reduce
performance compared to master, but will be fixed by the additional patches.
**Object duplication**
During object duplication the syncing is temporarily disabled. With this patch this isn't useful as when disabled
the view_layer is accessed to locate bases. This can be improved by first locating the source bases, then duplicate
and sync and locate the new bases. Will be solved in a separate patch for clarity reasons ({D15886}).
**Object add**
`BKE_object_add` not only adds a new object, but also selects and activates the new base. This requires the
view_layer to be resynced. Some callers reverse the selection and activation (See `get_new_constraint_target`).
We should make the selection and activation optional. This would make it possible to add multiple objects
without having to resync per object.
**Postpone Activate Base**
Setting the basact is done in many locations. They follow a rule as after an action find the base and set
the basact. Finding the base could require a resync. The idea is to store in the view_layer the object which
base will be set in the basact during the next sync, reducing the times resyncing needs to happen.
Reviewed By: mont29
Maniphest Tasks: T73411
Differential Revision: https://developer.blender.org/D15885
The trim functionality is implemented in the geometry module, and
generalized a bit to be potentially useful for bisecting in the future.
The implementation is based on a helper type called `IndexRangeCyclic`
which allows iteration over all control points between two points on a
curve.
Catmull Rom curves are now supported-- trimmed without resampling first.
However, maintaining the exact shape is not possible. NURBS splines are
still converted to polylines using the evaluated curve concept.
Performance is equivalent or faster then a 3.1 build with regards to
node timings. Compared to 3.3 and 3.2, it's easy to observe test cases
where the node is at least 3 or 4 times faster.
Differential Revision: https://developer.blender.org/D14481
This refactors the geometry nodes evaluation system. No changes for the
user are expected. At a high level the goals are:
* Support using geometry nodes outside of the geometry nodes modifier.
* Support using the evaluator infrastructure for other purposes like field evaluation.
* Support more nodes, especially when many of them are disabled behind switch nodes.
* Support doing preprocessing on node groups.
For more details see T98492.
There are fairly detailed comments in the code, but here is a high level overview
for how it works now:
* There is a new "lazy-function" system. It is similar in spirit to the multi-function
system but with different goals. Instead of optimizing throughput for highly
parallelizable work, this system is designed to compute only the data that is actually
necessary. What data is necessary can be determined dynamically during evaluation.
Many lazy-functions can be composed in a graph to form a new lazy-function, which can
again be used in a graph etc.
* Each geometry node group is converted into a lazy-function graph prior to evaluation.
To evaluate geometry nodes, one then just has to evaluate that graph. Node groups are
no longer inlined into their parents.
Next steps for the evaluation system is to reduce the use of threads in some situations
to avoid overhead. Many small node groups don't benefit from multi-threading at all.
This is much easier to do now because not everything has to be inlined in one huge
node tree anymore.
Differential Revision: https://developer.blender.org/D15914
When resizing mesh and curves attribute storage, avoid initializing the
new memory for basic types. Also, avoid skipping "no free" layers; all
layers should be reallocated to the new size since they may be accessed.
The semantics introduced in 25237d2625 are essential for this
change, because otherwise we don't have a way to construct non-trivial
types in the new memory.
In a basic test of the extrude node, I observed a performance
improvement of about 30%, from 55ms to 42ms.
Differential Revision: https://developer.blender.org/D15818
