After a lot of thinking about this, I decided that all operation modes
that I've tried over the past couple of years, including the original
2.79 one, have their uses after all. Thus the only reasonable solution
is to add yet another option.
The modes are:
- Strict: The current 2.80 mode, which overrides the original scaling
of the non-free axes to strictly preserve the volume. This is the most
obvious way one would expect a 'Maintain Volume' constraint to work.
- Uniform: The original 2.79 mode, which assumes that all axes have been
scaled the same as the free one when computing the volume. This seems
strange, but the net effect is that when simply scaling the object
uniformly with S, the volume is preserved; however, scaling the non-
free axes individually allows deviating from the locked volume.
This was obviously intended as a more or less convenient UI tool.
- Single Axis: My own variant of the intent of the Uniform scale, which
does volume-preserving if the object is scaled just on the Free axis,
while passing the non-free axis scaling through. I.e. instead of
uniform S scaling, the user has to scale the object just on its
primary axis to achieve constant volume. This can allow reducing the
number of animation curves when only constant volume scaling is needed,
or be an easier to control tool inside a complex rig.
A template_curve_mapping with brush=True was always resetting the curve
to a positive slope (descending from left to right).
Behaviour is now changed so that specifying "use_negative_slope" is
taken into account as well.
Also use this for:
- paint "cavity_curve"
- gpencil "curve_sensitivity" / "curve_strength" / "curve_jitter" /
"interpolation_curve"
Reviewers: brecht
Maniphest Tasks: T64164
Differential Revision: https://developer.blender.org/D4809
New icons from Andrzej Ambroż / jendrzych:
- New icons for select tool modes
- Brought back screen icon for viewport visibility toggles
- Added new Instanced visibility toggle (unused currently - meant for forthcoming updates to the Outliner)
- New Gizmo icon for the header
- Many tweaks and alterations to existing icons. Full list on Devtalk
- Use correct icon when Proportional Editing is disabled
Added working X-mirroring in pose mode with an optional relative mirror
mode.
Reviewed By: Campbell Barton
Differential Revision: http://developer.blender.org/D4765
- Add missing tooltips to Quick Effects and Subdivide Edge Ring
- Add proper tooltip to the Bevel operator
- Clearer tooltips for the extrude operators
Plus a few other tweaks
Suggested by users on Devtalk.
Note: Some adjustments were made compared to the diff mainly for code
readability and made the default ball size 150px.
Reviewed By: fclem
Differential Revision: http://developer.blender.org/D4793
- Use Display As rather than Draw Type, following naming conventions
- Rename Advanced subpanel to Stretching, since that more accurately describes what it's for
Users have requested to have the Annotate tool added to Sculpt Mode. It can be useful for annotating while sculpting.
- Remove Measure tool from the tools_annotate group
- Add Measure tool to object and edit mode toolbar
- Add Annotate tools to Sculpt and Paint modes
Differential Revision: https://developer.blender.org/D4785
- Add `render_aa` and `viewport_aa` sampling setting for workbench. 0
samples means no AA, 1 sample uses FXAA and more samples will use
TAA.
The viewport `gpu_viewport_quality` can still limit viewport anti-aliasing
method.
- Use TAA when rendering images. (this used to be CPU based FSAA)
- Removed `R_OSA` related settings.
Reviewers: fclem, brecht
Maniphest Tasks: T60847
Differential Revision: https://developer.blender.org/D4773
This panel is arguably the most important in the ViewLayer properties, so
the concept of "1 panel open per context" doesn't work. Especially since
the first panel (View Layer) contains only two settings.
In 2.7x UV sculpt was a kind of sub-mode
(a toggle with it's own key-map & drawing code).
Move this to an operator that uses the tool-system,
this simplifies internal logic, especially brush selection
which now matches sculpt and other paint modes.
- Remove toggle used to enable uv sculpt.
- Expose the brush, which was already used but there was no way to
select different brushes.
- Make UV sculpt use paint paint tool slots
(using brushes how all other paint mode currently do).
- Move UV Sculpt keymap to the tools keymap.
- Remove Q to toggle UV sculpt mode,
S/P/G keys to switch tools.
1. No need to repeat the title inside the panel (this was needed when we
had this as a popup menu).
2. No need to call it "Collections Visibility" since we are already
under the "View" category. It is "Collections" now, short and sweet.
- Merged SEQ_OFSDRAW with V3D_OFSDRAW and define in the
DNA_view3d_types: Due to this FSAA always kicked in making the
rendering slow.
- Removed `Texture Solid` and `DOF`.
- Now when chosing Solid rendering the settings
of the original scene is used.
- Added a global override to use scene specific shading. In the
Future we will need to enhanced this so user can change the
settings.
- Added support for LookDev. LookDev crashed as it needed the
`evil_C` what was not set
- LookDev mode will always show the scene + world lights.
Reviewed By: brecht, fclem
Maniphest Tasks: T62517
Differential Revision: https://developer.blender.org/D4738
- Move connected & projected into individual toggles.
- Top-level proportional editing button now only toggles.
- Use popover for proportional edit-mode falloff and options.
Note that it's no longer possible to toggle connected via key bindings,
although this could be supported again if it's needed.
Resolves T58081
This hides the top-bar by default for everything
besides paint/sculpt workspaces.
- Use the top-bar mainly for active tool settings &
popovers panel options.
(transform / snap settings are an exception for this convention).
- Only show the top-bar (by default)
in paint work-spaces (sculpt / texture-paint / grease-pencil).
- Add an active-tool panel to the sidebar.
- Split 3D view tabs into (Item / Tool / View).
D4721 with minor changes.
Further work is needed for the top-bar and image-editor.
This patch implements new cache system.
Aim is to give user more control over cache, so it can be maximally
utilized. This is done through sequencer timeline side panel
in category proxy & cache.
Cached images are also visualized in timeline, controled by
sequencer timeline view->cache menu
Functional changes:
- NOT use IMB_moviecache API
- refactor names of cached image types
- each scene owns 1 sequencer cache
- merge preprocess cache into per-sequencer cache
- cache links images rendered per frame in order as they are created
- add cache content visualization tool
- add RNA properties to control the cache
More info can be found in design notes in blenkernel/intern/seqcache.c
and in https://developer.blender.org/D4443
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D4443
Modifier previews should be implemented by a more generic system.
The current system is already a hack and needed a lot of work
to get it working again in 2.80 and even so that would be replaced by
another system in the near future.
For Vertex Colors we have a work around in place by using Workbench
Vertex Colors. For Vertex Weights we loose the previewing. Not sure
targetting weight is working (even for 279).
Reviewed By: brecht
Maniphest Tasks: T63857
Differential Revision: https://developer.blender.org/D4734
I also had to make the "New" operator a submenu in the
`File Context Menu`, so that you can still select the template.
This partially solves T61599. Currently the confirm dialog
is not shown when an already existing file is opened.
Implementing that requires a bit more work and will be
done in a separate patch.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D4732
Each spaces top-bar wasn't showing it's own active tool,
Remove RNA access to the workspaces tool since using it is error prone.
Eventually this should be completely removed.
As far as I can tell, there is no technical reason why the B-Bone
segment thickness scaling can't be separated into two axes. The
only downside is the increase in complexity of the B-Bone settings,
but this is inevitable due to the increase in flexibility.
Updating the file is somewhat complicated though, because F-Curves
and drivers have to be duplicated and updated to the new names.
Reviewers: campbellbarton
Subscribers: icappiello, jpbouza
Differential Revision: https://developer.blender.org/D4716
