Add `contains_group` method in python api for `NodeTree` type, cleanup
`ntreeHasTree` function, reuse `ntreeHasTree` in more place in code.
The algorithm has been changed to not recheck trees by using set.
Performance gains from avoiding already checked node trees:
Based on tests, can say that for large files with a huge number
of trees, the response speed of opening the search menu in the
node editor increased by ~200 times (for really large projects
with 16 individual groups in 6 levels of nesting). Group insert
operations are also accelerated, but this is different in some cases.
Pull Request #104465
Sockets after the geometry socket were ignored when cycling through
the node's output sockets. If there are multiple geometry sockets, the
behavior could still be refined probably, but this should at least make
basic non-geometry socket cycling work.
This will add a proper modal keymap for the node link drag operator.
It allows the user to customize the keys used to start drag and so on.
Also it gets rid of the custom status bar message.
Differential Revision: https://developer.blender.org/D17190
Allow to explicitly swap node links by pressing the alt-key while
reconnecting node links. This replaces the old auto-swapping based on
matching prefixes in socket names.
The new behavior works as follows:
* By default plugging links into already occupied (single input)
sockets will connect the dragged link and remove the existing one.
* Pressing the alt-key while dragging an existing node link from one
socket to another socket that is already connected will swap the
links' destinations.
* Pressing the alt-key while dragging a new node link into an already
linked socket will try to reconnect the existing links into another
socket of the same type and remove the links, if no matching socket
is found on the node. This is similar to the old auto-swapping.
Swapping links from or to multi input sockets is not supported.
This commit also makes the link drag tooltip better visible, when using
light themes by using the text theme color.
Reviewed By: Hans Goudey, Simon Thommes
Differential Revision: https://developer.blender.org/D16244
This was not done originally, because one had to iterate over all curves
to get the number of points which had some overhead. Now the number
of points is stored all the time anyway.
The reverse iteration added in e091291b5b didn't handle
the case where there are no nodes properly. Thanks to Iliya Katueshenock
for investigating this.
Socket declarations exist all the time and it would be useful to use
them for tooltips at all times, not just when there is a computed log.
Differential Revision: https://developer.blender.org/D16846
Since a year and a half ago we've been switching to a new way to
represent what sockets a node should have called "declarations"
that's easier to use, clearer, and more flexible for upcoming
features like dynamic socket counts or generic type sockets.
All builtin nodes with a static set of sockets have switched, but one
missing area has been group nodes and group input/output nodes. These
nodes have **dynamic** declarations which change based on their
properties or the group they're inside of. This patch addresses that,
in preparation for using the same dynamic declaration feature for
simulation nodes.
Generally there shouldn't be user-visible differences, but one benefit
is that user-created socket descriptions are now visible directly in
the node editor for group nodes and group input/output nodes.
The commit contains a few changes:
- Add a node type callback for building dynamic declarations with
different arguments
- Add an `Extend` socket declaration for the "virtual" sockets used
for connecting new links
- A similar `Custom` socket declaration is used for addon-defined socket
- Simplify the node update loop to use the declaration to build update
sockets
- Replace the "group update" functions with the declaration building
- Move the node group input/output link creation to link drag operator
- Make the field status part of group node declarations
(not for group input/output nodes though)
- Some fixes for declarations to make them update and build properly
Differential Revision: https://developer.blender.org/D16850
Updates the add and search menu of the node editor to use the new "All"
asset library introduced in the previous commit. This simplifies code by
removing redundant logic to merge contents of multiple asset libraries.
Since internal links are only runtime data, we have the flexibility to
allocating every link individually. Instead we can store links directly
in the node runtime vector. This allows avoiding many small allocations
when copying and changing node trees.
In the future we could use a smaller type like a pair of sockets
instead of `bNodeLink` to save memory.
Differential Revision: https://developer.blender.org/D16960
- Avoid calling node interface items "sockets"
- Use "active" instead of "current" to be more correct
- Avoid using the same word in description and name
- A couple grammar fixes
Socket locations are set while drawing the node tree in the editor.
They can always be recalculated this way based on the node position and
other factors. Storing them in the socket is misleading. Plus, ideally
sockets would be quite small to store, this helps us move in that
direction.
Now the socket locations are stored as runtime data of the node editor,
making use of the new node topology cache's `index_in_tree` function
to make a SoA layout possible.
Differential Revision: https://developer.blender.org/D15874
This patch moves the realtime compositor out of experimental. See
T99210.
The first milestone is finished with regards to implementing most
essential nodes for single pass compositing. It is also now documented
in the manual and no major issues are known.
Differential Revision: https://developer.blender.org/D16891
Reviewed By: Clement Foucault
Use NodeTree.bl_label instead of "NodeTree" for more descriptive name.
Implemented by Iliya Katueshenock.
Differential Revision: https://developer.blender.org/D16856
For some reason I don't understand, the dragged link is sorted across
all the node's multi-input sockets. This leads to problems when there
are multiple sockets to sort. With this patch, I'm making the feature
work more directional.
Differential Revision: https://developer.blender.org/D16892
Finding the active view item button should only happen when it's actually
necessary, since looping through all buttons and blocks is an expensive
operation. This patch limits the search a bit more, to left clicks (the only
case that is actually handled).
This improves drawing performance in the node editor slightly,
where this was a bottleneck.
Differential Revision: https://developer.blender.org/D16882
When pasting nodes with the shortcut or the context menu, place the
center of the selected nodes at the same position as the mouse cursor.
This should save time, and is more intuitive because the new nodes are
actually visible.
Based on a patch by Juanfran Matheu (@jfmatheu).
Differential Revision: https://developer.blender.org/D10787
The main change is returning a socket pointer instead of using two
return arguments. Also use the topology cache instead of linked lists,
references over pointers, and slightly adjust whitespace.
Partly a cleanup, but also iterating over spans can be faster than
linked lists. Also rewrite the multi-input socket link counting
to avoid the need for a temporary map. Overall, on my setup the changes
save about 5% (3ms) when drawing a large node tree (the mouse house file).
Small memory allocations are a bottleneck when drawing large node trees.
Avoid them by passing the socket index in the whole tree and getting the
tree from the context rather than allocating structs for the tree, node,
and socket. The performance improvement will be a few percent at most.
- Move from blenkernel to the node editor, the only place it was used
- Use two vectors instead of ListBase
- Remove define for validating the clipboard, which shouldn't be skipped
- Comment formatting, other small cleanups to whitespace
Differential Revision: https://developer.blender.org/D16880
When these declarations are built without the help of the special
builder class, it's much more convenient to set them directly rather
than with a constructor, etc. In most other situations the declarations
should be const anyway, so theoretically this doesn't affect safety too
much. Most construction of declarations should still use the builder.
Geometry nodes used to log all socket values during evaluation.
This allowed the user to hover over any socket (that was evaluated)
to see its last value. The problem is that in large (nested) node trees,
the number of sockets becomes huge, causing a lot of performance
and memory overhead (in extreme cases, more than 70% of the
total execution time).
This patch changes it so, that only socket values are logged that the
user is likely to investigate. The simple heuristic is that socket values
of the currently visible node tree are logged.
The downside is that when the user changes the visible node tree, it
won't have any logged values until it is reevaluated. I updated the
tooltip message for that case to be a bit more precise.
If user feedback suggests that this new behavior is too annoying, we
can always add a UI option to log all socket values again. That shouldn't
be done without an actual need though because it takes up UI space.
Differential Revision: https://developer.blender.org/D16884
Separate the "insert nodes into group" operation into more distinct
phases. This helps to clarify what is actually happening, to avoid
redundant updates to group nodes every time a new socket is discovered,
and to make use of the topology cache to avoid the "accidentally
quadratic" alrogithms that we have slowly been removing from node
editing.
The change is motivated by the desire to use dynamic node declarations
for group nodes and group input/output nodes, where it is helpful to
avoid updating the declaration and sockets multiple times.
Use the map created for copying nodes more instead of iterating over all
nodes unnecessarily a few times. Use the map empty check instead of
a separate boolean variable. Use a utility function to retrieve a
separate buffer of selected nodes in case the nodes by id Vector
is reallocated (that part is technically a fix).
