When using vertex parenting, an option for using the parent object
final evaluated indices is exposed in the Object Properties: Relations
panel. This allows the calculation of the parent vertex position to
ignore the the CD_ORIGINDEX layer and instead use the final indices
that may have been altered by the node tree evaluation.
The indices that will be used for the vertex parenting are also exposed
to the UI in the same panel, allowing them to be altered after the
vertex parent has been created.
The main issue of 'type-less' standard C allocations is that there is no check on
allocated type possible.
This is a serious source of annoyance (and crashes) when making some
low-level structs non-trivial, as tracking down all usages of these
structs in higher-level other structs and their allocation is... really
painful.
MEM_[cm]allocN<T> templates on the other hand do check that the
given type is trivial, at build time (static assert), which makes such issue...
trivial to catch.
NOTE: New code should strive to use MEM_new (i.e. allocation and
construction) as much as possible, even for trivial PoD types.
Pull Request: https://projects.blender.org/blender/blender/pulls/136134
The general idea is to keep the 'old', C-style MEM_callocN signature, and slowly
replace most of its usages with the new, C++-style type-safer template version.
* `MEM_cnew<T>` allocation version is renamed to `MEM_callocN<T>`.
* `MEM_cnew_array<T>` allocation version is renamed to `MEM_calloc_arrayN<T>`.
* `MEM_cnew<T>` duplicate version is renamed to `MEM_dupallocN<T>`.
Similar templates type-safe version of `MEM_mallocN` will be added soon
as well.
Following discussions in !134452.
NOTE: For now static type checking in `MEM_callocN` and related are slightly
different for Windows MSVC. This compiler seems to consider structs using the
`DNA_DEFINE_CXX_METHODS` macro as non-trivial (likely because their default
copy constructors are deleted). So using checks on trivially
constructible/destructible instead on this compiler/system.
Pull Request: https://projects.blender.org/blender/blender/pulls/134771
This applies to modifiers, constraints and shape keys.
Any driver on such data was not removed with it,
leaving invalid drivers on objects.
With this patch, the drivers are removed, but animation is left untouched.
This is because animation might be reused somewhere else and we don't
want to introduce potential side effects there.
This also adds unit tests for the fixed cases
Pull Request: https://projects.blender.org/blender/blender/pulls/134511
Remove GP legacy obtype and unused functions
Few hidden bugs are fixed with that:
- Outliner drag-drop for GP material/effect elements now works
- Correct stats are shown in status bar.
Pull Request: https://projects.blender.org/blender/blender/pulls/133957
Previously we generally expected CustomData layers to have implicit
sharing info, but we didn't require it. This PR clarifies that we do
require layers with non-null data to have implicit sharing info. This
generally makes code simpler because we don't have to have a separate
code path for non-shared layers. For example, it makes the "totelem"
arguments for layer freeing functions unnecessary, since shared data
knows how to free itself. Those arguments are removed in this PR.
Pull Request: https://projects.blender.org/blender/blender/pulls/134578
Move `Library.runtime` to be a pointer, move the related
`LibraryRuntime` struct to `BKE_library.hh`. Similar to e.g.
Mesh.runtime, that pointer is expected to always be valid, and is
allocated at readtime or when creating a new Library ID.
Related smaller changes:
* Write code now uses standard ID writing codepath for Library IDs too.
* Runtime pointer is reset to nullptr before writing.
* Looking up a library by its absolute path is now handled through a
dedicated utils, `search_filepath_abs`, instead of using
`BLI_findstring`.
Pull Request: https://projects.blender.org/blender/blender/pulls/134188
Reason is that `BKE_camera_view_frame_fit_to_scene` cannot handle grease
pencil data [it used to, that was once added in 80d0b68290 but lost in
the switch to GPv3 (see 5c57e24fea)].
So to resolve, add back support for grease pencil in
`BKE_camera_view_frame_fit_to_scene` which is similar to what we do for
getting the bounding box.
Pull Request: https://projects.blender.org/blender/blender/pulls/132733
The type check there should not be necessary anymore nowadays. It looks like it
might have been necessary when it was introduced in
eed45d2a23. Back then the object was still passed
into `BKE_mesh_wrapper_ensure_subdivision`.
Pull Request: https://projects.blender.org/blender/blender/pulls/131857
Give the `IDWALK_CB_…` enum an explicit name:
`LibraryForeachIDCallbackFlag`. This way the flags are type-safe, and
it's known where values come from. This is much preferred (at least by
me) to just having `int flags`.
Uses of `0` have been replaced with `IDWALK_CB_NOP` as that has the same
value and is of the right type.
One invalid use of `IDWALK_NOP` was detected by this change, and is
replaced by `IDWALK_CB_NOP`.
This change might be incomplete; I gave the enum a name, fixed the
compiler errors, and then also updated assignments like `int cb_flag =
cb_data->cb_flag`. I might have missed some assignments to `int` though.
No functional changes.
Pull Request: https://projects.blender.org/blender/blender/pulls/131865
Two commits that basically do the same thing for two `enum`s: give
them a name.
- the `IDWALK_…` enum → `LibraryForeachIDFlag`.
- the `IDWALK_CB_…` enum → `LibraryForeachIDCallbackFlag`.
This way the flags are type-safe, and it's known where values come
from. This is much preferred (at least by me) to just having `int
flags`.
Uses of `0` have been replaced with `IDWALK_NOP` and `IDWALK_CB_NOP`,
as those have the same value and are of the right type.
One invalid use of `IDWALK_NOP` was detected by this change, and is
replaced by `IDWALK_CB_NOP`. And another one in the opposite
direction.
This change might be incomplete; I gave the enum a name, fixed the
compiler errors, and then also updated assignments like `int cb_flag =
cb_data->cb_flag`. I might have missed some assignments to `int`
though.
No functional changes.
----------
I intend to land this PR as its two separate commits. I just put them in the same PR so the buildbot can handle them in one go, and we don't have a stack of highly relatled PRs.
In the future this could also apply to the `IDWALK_RET_…` enum. This one I left out, though, because a proper cleanup there would also have to include their ambiguity on whether they are bitflags (like the enums in this PR) or not. Their values and the code in `BKE_lib_query_foreachid_process()` implies they are bitflags, but in practice they are never or'ed together and just used as discrete values.
Pull Request: https://projects.blender.org/blender/blender/pulls/131803
These are converted on startup to the new type. There are still
some references left, mostly where it looked like there still needs
to be changes to properly deal with the new object type.
The "is edit mode" checks in the draw module have been simplified
to just check the object mode. We need to be a bit more careful to
avoid retrieving the original mesh from a non-mesh object.
This commit improves the "get pre-modified mesh" function with
better comments and checks that reflect the relatively recent cases
where the original and evaluated geometry data types don't match.
It's always called with a mesh object too.
Pull Request: https://projects.blender.org/blender/blender/pulls/130850
Currently replacing the Mesh during evaluation with the object info node
can cause us to use invalid original indices when the source object is
in edit mode. This is really a more fundamental problem though: we have
no way to tell whether an evaluated mesh actually corresponds to the
object's original mesh.
This commit changes to explicitly propagating the edit mesh pointer
through copied and changed meshes during modifier and nodes evaluation,
instead of just blindly copying the edit mode pointer from the original
mesh to the evaluated mesh. A benefit of not writing to the evaluated
mesh means it can be shared, potentially offering a future performance
improvement for uses of the object info node.
When we detect an invalid correspondence between the evaluated/original
meshes, we skip extracting the cage mesh's data and skip extracting edit
mesh data from the evaluated object.
This commit also moves the source of "object is in edit mode" truth in
the draw module from whether the evaluated mesh has an edit mode pointer
to the object's mode flag. That's a simplification that's also helpful
to reduce the strong linking between BMesh and edit mode.
Pull Request: https://projects.blender.org/blender/blender/pulls/120999
Since all legacy Grease Pencil modifier are converted to regular modifiers
in versioning, we should never be in a position where we need to write the
old modifiers anymore.
Pull Request: https://projects.blender.org/blender/blender/pulls/130388
NOTE: This also required some changes to Cycles code itself, who is now
directly including `BKE_image.hh` instead of declaring a few prototypes
of these functions in its `blender/utils.h` header (due to C++ functions
names mangling, this was not working anymore).
Pull Request: https://projects.blender.org/blender/blender/pulls/130174
This was added 7 years ago as 'safe' preservation of previous behavior,
when ID copying was refactored and more control was added over its
behavior.
However, it was never removed since then, even though `NO_PREVIEW` flag
has been part of the `LOCALIZE` copying behavior since many years.
So time to remove this enforced bahevior and use the API as designed. If
this causes new issues, they will have to be fixed in code calling the
ID copy API (most likely by simply adding the `NO_PREVIEW` flag to the
copy options).
For C/C++ doc-strings should be located in headers,
move function comments into the headers, in some cases merging
with existing doc-strings, in other cases, moving implementation
notes into the function body.
`SculptSession` is a runtime struct that should really be stored in
`ObjectRuntime` instead of `Object`. Writing pointers to it in files
is misleading because the struct itself isn't serialized.
Pull Request: https://projects.blender.org/blender/blender/pulls/129233
Even though this is generally avoided, drivers don't prevent
invalid values being set. Further files from branches or files
written in the future may contain enum values not yet known.
Resolve by range checking enum values which are used to index arrays.
Removes unused GPv2 functions in blenkernel.
Notes:
- Functions for layer masks are still in use, but annotations never
have layer masks in the first place. Would be good to remove the data
structures so we can remove the functions too.
- Some multi-frame edit functions are also still nominally used, but
multi-frame editing is not an active feature for annotations. This
should also be removed.
Pull Request: https://projects.blender.org/blender/blender/pulls/128709
This renames the mode identifiers to be consistent with e.g. the context mode identifiers and other names used for the new Grease Pencil.
For `object.mode`:
* `PAINT_GPENCIL` -> `PAINT_GREASE_PENCIL`
* `SCULPT_GPENCIL` -> `SCULPT_GREASE_PENCIL`
* `VERTEX_GPENCIL` -> `VERTEX_GREASE_PENCIL`
* `WEIGHT_GPENCIL` -> `WEIGHT_GREASE_PENCIL`
For the internal `ob->mode` flag:
* `OB_MODE_PAINT_GPENCIL_LEGACY` -> `OB_MODE_PAINT_GREASE_PENCIL`
* `OB_MODE_SCULPT_GPENCIL_LEGACY` -> `OB_MODE_SCULPT_GREASE_PENCIL`
* `OB_MODE_VERTEX_GPENCIL_LEGACY` -> `OB_MODE_VERTEX_GREASE_PENCIL`
* `OB_MODE_WEIGHT_GPENCIL_LEGACY` -> `OB_MODE_WEIGHT_GREASE_PENCIL`
Resolves#127374.
Pull Request: https://projects.blender.org/blender/blender/pulls/128604
Because we're moving to layered actions, which don't store their
fcurves in a list base, we need to update the places that assume the old
listbase-based structure.
This commit addresses the low-hanging fruit where code was previously
using the `LISTBASE_FOREACH` macro on a listbase of fcurves and it was
fairly obvious how to correctly update the code with minimal changes.
Other cases that either weren't immediately obvious or required
non-trivial code changes (or both) have been left for future PRs.
Additionally, uses of the list base that didn't use `LISTBASE_FOREACH`
were not investigated as part of this PR, whether trivial to update or
not.
Ref: #123424
Pull Request: https://projects.blender.org/blender/blender/pulls/127920
Previously, values for `ID.flag` and `ID.tag` used the prefixes `LIB_` and
`LIB_TAG` respectively. This was somewhat confusing because it's not really
related to libraries in general. This patch changes the prefix to `ID_FLAG_` and
`ID_TAG_`. This makes it more obvious what they correspond to, simplifying code.
Pull Request: https://projects.blender.org/blender/blender/pulls/125811
This removes the legacy Grease Pencil modifiers from the code.
These should have already been inaccessible from the UI and hidden from
the user. The modifiers have been reimplemented for the new GPv3
data structure.
On top of the modifier code, some other related things have been
removed as well:
* Operators related to the legacy modifiers.
* Keymaps for the legacy modifier operators.
* Some bits of code that used modifier functions.
Some code has to be kept, because it is still used:
* The core line art code, which is used by the new line art modifier. It's
moved to `modifiers/lineart`.
* The DNA structs for the legacy modifiers. They are still needed for
conversion.
* A few kernel functions for the modifiers are kept (also for conversion).
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/125102
The code which is responsible for applying data from coordinate grids to
displacement grids could be run as part of modifier evaluation, hence
using the safe version of accessing mesh data was returning a nullptr.
Pull Request: https://projects.blender.org/blender/blender/pulls/123907
