- A single undo removes all 4 inserted spaces at once.
- Indent and unindent now use spaces.
The number of spaces is still hardcoded as 4. PS: Campbell sharing a couple of the minor todo's with me, thanks :).
* Fixed a nasty bug which meant that it was impossible to set an active node. Was caused by ntreeCopyTree() getting called when compo updates were done and clearing the active flags. The active flag clearing is only really needed for the "internal_select" case which is only used for duplicating selected nodes (from Shift-D duplicate).
* Recoded click-selection code. Was a mess of old code, bad exceptions from the old code half ported, duplicate operators, unnecessary flags/modes.
* Fixed bug #19927: compositing node groups can't be access via "tab" or ungrouped via "alt+g". Was probably related to the active group not being able to be set.
* Made resizing nodes work again. Again, this was due to the active node bug.
* Made adding a new group with Ctrl-G correctly update the views
* Added tablet pressure support (size/strength) for weight paint and vertex paint
* Added tablet eraser support for weight paint and vertex paint (inverts the effect of the current tool)
* Removed the old 'soft' option, now weight paint and vertex paint use the influence curve
* Made the default brush use a smooth influence curve, rather than sharp
To insert keys, use I key while hovering over the button for now, rmb clicking on the property to insert a key doesn't work (general bug for all regions except property editor - will investigate).
Doesn't convert over from old fac0 ipos on opening old files though for the time being.
* Made sequence strip names unique while I was at it, to allow strip properties to be animated properly.
only implimented min/max precision & step.
at the moment there is no way to edit these other then via python
example of setting UI limits...
>>> C.object['foo'] = 0.5
>>> C.object['_RNA_UI'] = {'foo': {'step': 0.5, 'soft_max': 10.0, 'soft_min': 0.0, 'precision': 2, 'description': 'Some setting'}}
Also fixed typo's: precission -> precision
* structural can be set to 0
* pre-roll now available through GUI and works like following:
a) Pre rolled frames are NOT cached
b) reset cache + cloth on pre roll setting change
* Snapping strips now works with the hotkey Shift-S as in the rest of Blender
* Preview Range works in Sequencer now (the operators for setting, clearing, and also drawing)
* Related to the Preview Range for Sequencer, toggling the time-display mode also works
* Preview Range Set operator now works again, after the modal keymaps change for borderselect broke it. Also sends correct notifiers now after bein called.
* Removing duplicate api functions
* Shuffled around newly added api functions to make the ordering more consistent
* Fixes for a few bugs in the api functions as I checked over them
* Replaced most of the #defines for flags and modes with enums
- renamed .add() to .new() for rna collection functions since they dont add an existing item.
- remove 'name' as an argument from the new driver target function, better to keep the api minimal and let scripters use the data api for editing values after.
- added some api functions to keep rna api from becoming a mess.
- more api like functions for adding movie, sound & images (easier to use from pyrna api)
- operators share more settings
- renamed get_last_seq() to active_seq_get() - same for set.
Action Constraints were failing when the rotation mode was non-default. Fixed this by copying over the current rotation mode when creating temp elements to evaluate with.
* Updating dependencies for drivers now clears the disabled status of the relevant Driver FCurve too
* Changing the type of ID-block used for Driver Targets and Keying Set Paths will now clear the pointer to the ID-block if it is of the wrong type.
* Renamed "Keep Max Length" to "Y Scaling" which has the opposite meaning
* Improved the way that Y-Scaling off behaves. Most of the time, bones that do not fit on the curve are now "blended off" their default rotations instead of being scaled to zero.
* Added option to offset an entire chain by moving the root bone of the chain. This is named "Chain Offset"
- collection functions rename eg. bones_active -> bones__active, add_object -> objects__add since these should be accessed from the collections only.
- fix warnings in last commit
Added a group example
C = bpy.context
ob = C.active_object
bpy.data.groups[0].objects.add(ob)
- add_to_group and rem_from_group now take optional scene and base flags and deal with updating the object & base flags
- operators that add objects to groups were setting ob->recalc= OB_RECALC_OB; looks like its not needed.
- previously add() ignored python args, now add and remove are called like any other FunctionRNA from python.
- made the pyrna api use tp_getset's for collestions active/add()/remove()
Now the rna path to nodes happens via the node name, which is ensured to be unique via RNA.
As part of this, the node->username string has been removed, upon renaming the node itself it takes care of making sure it's unique (like bones, constraints, etc). There's currently no interactive rename tool, but you can do it via the datablocks editor.
- plus a few notifier tweaks, using the newer NC_NODE notifier to refresh graph editor etc.
* Convert all code to use new functions.
* Branch maintainers may want to skip this commit, and run this
conversion script instead, if they use a lot of math functions
in new code:
http://www.pasteall.org/9052/python
this way the UI scripts are less likely to fail silently and wont let typos work ok.
also allow subclassing of the context, added a copy function,
bpy.context.copy(), returns the context as a python dict to be modified and used in python.
This also showed up an invalid brush member in the screen context.
Still a few quirks, including redraw issues on multilayer image input nodes, but it's pretty much there.
Would also be good to wrap the input/output sockets, too, will check on it.
This fixes bug [#19740] INPUT NODE: Cannot load images / motion pictures
* Fixed the handling of the 'draw_active' flag for drawing of armatures. This is now cleared from bones in old files (so one bone always got represented as active in the viewport even when others were selected), and the flag is correctly set temporarily when drawing the bones (only one place had been done).
* Fixed typo with SplineIK that was making the root bone of the bone chains always be ignored. Similar functionality can come back at some point, but in a more useful form.
* Shortened the UI names for the F-Curve colouring modes to increase readability. The old ones were too long to be able to distinguish between entries in the UI.
- rna vars arm.bones.active & rna.edit_bones.active
- needed special undo support.
- readfile.c loads.
- duplicate and copy_armature support.
- keep the draw flag, renamed to BONE_DRAW_ACTIVE, only use for openGL drawing.
Note: it may be better to allow active/unselected as with objects.
* #19819: 'Select' operator for Hooks was crashing when Hooks didn't have any vertices assigned yet
* Default twist resolution mode for curves is now 'Minimise'. This seems to work better for Curve Deforms and other purposes. Can be changed if other ways are better after some more testing.
* Spline IK now has more options for controlling how the x and z axis scaling is determined. There is now a choice between using the radius of the curve, the x+z scaling from the bones, or no scaling (default). This does break old files a bit, but this is to have a more stable base for later.
Recoded the way that Spline-IK computes the x+z axes of the bones so that flipping artifacts are minimised, and the rotation of individual bones can be used to affect the results of the solution, as per requests from Cessen.
The bone matrices are now computed normally, and then made to conform to the orientation + scaling imposed by the splines, using the Damped-Track method. Previously, the axes of the bones were calculated without regarding the prior orientation of other bones in the chain, which lead to "z-twists".
Notes for further investigation:
- There appears to be some shearing that gets introduced now. Unforunately, I can't seem to isolate the cause of this, but I hope it's not going to become too much of a problem in general.
- Maybe inverse corrections for rotation will now be necessary when using transform tools?
Non-ID pointers in DNA can only point to data from own ID block, so
now instead it uses an index into the particle system list, but still
exposed as a pointer through RNA.
1) "Even Divisions" - This option ignores the length of bones when considering how they should fit along the curve. This is useful for getting a smoother curve fit without having to worry about getting the bone lengths spot on. By default, this is disabled.
2) "Keep Max Length" - This option prevents the bone chain from extending past its natural length when the spline is stretched beyond that length. When the spline length is substatially shorter though, this bones get scaled to zero; making this option possibly useful for doing "growing tips".
This is essentially a 'no scale' option, although the behaviour when the curve is shorter is really a compromise since the curve cannot be accurately satisfied + left intact without some scaling being applied due to the way this works.
3) "Radius to Thickness" - The average radius of the spline between at the head+tail of each bone determines the x+z scaling of the bone.
* Fixed crash when reloading a file with Spline IK and/or Damped Track constraints. The targets for these constraints weren't getting relinked.
* Fixed problems with removing Spline IK making some bones unable to be manipulated.
* Jotted down some comments in the Spline IK code noting places where additional tweaks will be added.
