When plotting equally distant points around a circle support an extra
axis of symmetry so twice as many exact values are repeated than
originally added in [0], see code-comments for a detailed explanation.
Tests to ensure accuracy and exact symmetry have been added too.
Follow up on fix for T87779.
[0]: 087f27a52f
`parallel_invoke` allows executing functions on separate threads.
However, creating tasks in tbb has a measurable amount of overhead.
Therefore, it can be benefitial to disable parallelization when
the amount of work done per function is small.
See D15539 for some benchmark results.
Differential Revision: https://developer.blender.org/D15539
The face merging code in exact boolean made an assumption that
the tesselated original face was manifold except at the boundaries.
This should be true but sometimes (e.g., if the input faces have
self-intersection, as happens in the example), it is not.
This commit makes face merging tolerant of such a situation.
It might leave some stray edges from triangulation, but it should
only happen if the input is malformed.
Note: the input may be malformed if there were previous booleans
in the stack, since snapping the exact result to float coordinates
is not guaranteed to leave the mesh without defects.
This is the second try at this commit. The previous one had a typo
in it -- luckily, the tests caught the problem.
Use the newer more generic sampling and interpolation functions
developed recently (ab444a80a2) instead of the `CurveEval` type.
Functions are split up a bit more internally, to allow a separate mode
for supplying the curve index directly in the future (T92474).
In one basic test, the performance seems mostly unchanged from 3.1.
Differential Revision: https://developer.blender.org/D14621
Previously, curves sculpt tools only worked on original data. This was
very limiting, because one could effectively only sculpt the curves when
all procedural effects were turned off. This patch adds support for curves
sculpting while looking the result of procedural effects (like deformation
based on the surface mesh). This functionality is also known as "crazy space"
support in Blender.
For more details see D15407.
Differential Revision: https://developer.blender.org/D15407
Calling `finish` after writing to generic attributes is currently necessary for
correctness. Previously, this was easy to forget. Now there is a check for this
in debug builds.
This commit ports the fillet curves node to the new curves data-block,
and moves the fillet node implementation to the geometry module to help
separate the implementation from the node.
The changes are similar to the subdivide node or resample node. I've
resused common utilities where it makes sense, though some things like
the iteration over attributes can be generalized further. The node
is now multi-threaded per-curve and inside each curve, and some buffers
are reused per curve to avoid many allocations.
The code is more explicit now, and though there is more boilerplate to
pass around many spans, the more complex logic should be more readable.
Differential Revision: https://developer.blender.org/D15346
For bit counts that were exact multiple of block size, the macro was
computing one block too much.
Reviewed By: Campbell Barton, Bastien Montagne
Differential Revision: https://developer.blender.org/D15454
In preparation for a larger change (D14162), some BLI_bitmap
functionality that could be submitted separately:
- Ability to declare a fixed size bitmap by-value, without extra
memory allocation: BLI_BITMAP_DECLARE
- Function to find the index of lowest unset bit:
BLI_bitmap_find_first_unset
- Test coverage of the above.
Reviewed By: Campbell Barton, Bastien Montagne
Differential Revision: https://developer.blender.org/D15454
The face merging code in exact boolean made an assumption that
the tesselated original face was manifold except at the boundaries.
This should be true but sometimes (e.g., if the input faces have
self-intersection, as happens in the example), it is not.
This commit makes face merging tolerant of such a situation.
It might leave some stray edges from triangulation, but it should
only happen if the input is malformed.
Note: the input may be malformed if there were previous booleans
in the stack, since snapping the exact result to float coordinates
is not guaranteed to leave the mesh without defects.
`GSpan` and spans based on virtual arrays were not default constructible
before, which made them hard to use sometimes. It's generally fine for
spans to be empty.
The main thing the keep in mind is that the type pointer in `GSpan` may
be null now. Generally, code receiving spans as input can assume that
the type is not-null, but sometimes that may be valid. The old #type() method
that returned a reference to the type still exists. It asserts when the
type is null.
This commit moves the subdivide curve node implementation to the
geometry module, changes it to work on the new curves data-block,
and adds support for Catmull Rom curves. Internally I also added
support for a curve domain selection. That isn't used, but it's
nice to have the option anyway.
Users should notice better performance as well, since we can avoid
many small allocations, and there is no conversion to and from the
old curve type.
The code uses a similar structure to the resample node (60a6fbf5b5)
and the set type node (9e393fc2f1). The resample curves node can be
restructured to be more similar to this soon though.
Differential Revision: https://developer.blender.org/D15334
This is just a theoretical improvement currently, I won't try to justify
it with some microbenchmark, but it should be better to use the
specialized single and span virtual arrays when slicing a `GVArray`,
since any use of `GVArrayImpl_For_SlicedGVArray` has extra overhead.
Differential Revision: https://developer.blender.org/D15361
This refactor had two main goals:
* Simplify the sampling code by using an algorithm with fewer special cases.
* Generalize the sampling to support non-sorted samples.
The `SampleSegmentHint` optimization was inspired by `ValueAccessor` from
OpenVDB and improves performance 2x in my test cases.
Differential Revision: https://developer.blender.org/D15348
Many existing importers/exporters do log the time it takes to system
console (some others log more information too). In particular, OBJ
(C++ & python), STL (C++ & python), PLY, glTF2 all log the time it
takes. However, neither USD nor Alembic do. And also it's harder to
know the time it takes there from a profiler, since all the work
normally is done on a background job and is split between several
threads (so you can't just find some top-level function and see how
much time it took).
This change:
- Adds import/export time logging to USD & Alembic importer/exporter,
- In the time utility class (also used by OBJ & STL), improve the
output formatting: 1) print only one decimal digit, 2) for long
times, print seconds and also produce a hours:minutes:seconds form.
Reviewed By: Michael Kowalski, Kévin Dietrich
Differential Revision: https://developer.blender.org/D15170
The memory manager includes both a GPUContext-local manager which allocates per-context resources such as Circular Scratch Buffers for temporary data such as uniform updates and resource staging, and a GPUContext-global memory manager which features a pooled memory allocator for efficient re-use of resources, to reduce CPU-overhead of frequent memory allocations.
These Memory Managers act as a simple interface for use by other Metal backend modules and to coordinate the lifetime of buffers, to ensure that GPU-resident resources are correctly tracked and freed when no longer in use.
Note: This also contains dependent DIFF changes from D15027, though these will be removed once D15027 lands.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D15277
This patch includes the full shadow functionality for LineArt:
- Light contour and cast shadow lines.
- Lit/shaded region selection.
- Enclosed light/shadow shape calculation.
- Silhouette/anti-silhouette selection.
- Intersection priority based on shadow edge identifier.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D15109
This commits reduces the number of function calls through function
pointers in `blender::Any` when the stored type is trivial.
Furthermore, this implements marks some classes as trivial, which
we know are trivial but the compiler does not (the standard currently
says that any class with a virtual destructor is non-trivial). Under some
circumstances we know that final child classes are trivial though.
This allows for some optimizations.
Also see https://www.open-std.org/jtc1/sc22/wg21/docs/papers/2018/p1077r0.html.
This reduces the amount of code, and improves performance a bit by
doing more with less virtual method calls.
Differential Revision: https://developer.blender.org/D15293
This makes calculation of selected indices slightly faster when the
input is a virtual array (the direct output of various nodes like
Face Area, etc). The utility can be helpful for other areas that
need to find selected indices besides field evaluation.
With the face area node used as a selection with 4 million faces,
the speedup is 3.51 ms to 3.39 ms, just a slight speedup.
Differential Revision: https://developer.blender.org/D15127
