* Mesh data/settings can now be animated. It is not recommended that geometry be animated directly, but other settings such as autosmooth, etc. can be...
* Code cleanups for depsgraph, making sure that drivers get included for all object data types.
This commit brings back the functionality whereby the selection of F-Curves and/or relevant Group(s) is synced with the selection status of the corresponding bones when the bones are selected/deselected.
* Added ANIM_list_elem_update and ANIM_id_update functions to call when
changing animation curves, which will then call the RNA property update
functions for those curves.
This is to replace just calling DAG_id_flush_update, that may not always
be the right thing to do, and doesn't send proper notifiers for redraw.
Still only used/usable when transforming in the graph editor, not sure
how this do this with NLA for example, .. needs to be improved.
* Added function wm_data_handle_update function to contain the object
update function, and also added scene animation update there. Actually
it should be doing all datablocks, this makes it work for sequencer.
Joshua, do you agree this is the right direction to go in? I can revert or
change the code if you think it should be done differently. Mainly wanted
to get this working well for sequencer now.
This commit fixes#19908 and #20239. Deleting keyframes will now delete the F-Curves they came from too, if the F-Curves don't have any more keyframes and/or F-Modifiers providing any further motion info.
Improved the hotkeys for toggling the visibility of channels in the keys area for the Graph Editor.
* VKEY - this is now used for making only the selected channels visible, hiding everything else
* Shift-VKEY - the old toggling behaviour
In addition to this, I've made these toggling operators flush the visibility flags up/down the hierarchy, just like clicking on the channels manually do. There are still a few minor oddities to iron out, but it should be better than before.
Also, fixed a bug with these toggling operators introduced during my earlier commit to make filtering work ok. It's always tricky getting these layers of checks just right, so hopefully nothing breaks now again...
* Removed ED_anim_dag_flush_update and ED_anim_object_flush_update. These
were wrapping DAG_* calls and were intended be used instead of them when
doing a DAG update from editors. That goes against the design in my opinion,
no matter who calls the DAG, that should update the editors correctly, so
any special checks in such functions for editors should be avoided.
* Driver RNA properties now do updates again, including DAG scene sorting,
text buttons no longer update as you type anymore, so this should be
safe I think.
* Remove scene.update() RNA function, all properties/functions should do this
automatically, if changing some property or calling a function/operator
does not do the correct update, that should be fixed.
Now when nodes are keyed, they will show up in the dopesheet/graph editor/etc in a new 'Nodetree' category.
Still a major problem left, nodes need unique names in order for the rna paths to hold animation data properly...
* When there is only a single keyframe for a F-Curve, the handles aren't shown anymore. This looks nicer than the fat orange blobs that appeared
* Tweaked the management of GL_BLEND when drawing animation channels in the Graph Editor in an attempt to fix some of the missing text drawn issues.
* Converted the properties panel to use layout engine + added color selectors
Special priority request from Durian team to get this sub-editor of the DopeSheet Editor restored. Originally I was kindof planning to drop it, but obviously it still has a role!
It now supports all the modern features that the DopeSheet supports, complete with selection, muting, locking, DopeSheet summary, and all the other tools that you know and love from the other views.
Also, this no longer uses the old hacky sliders that 2.4x used (instead it uses RNA-based ones), so should function just the same as other DopeSheet views).
Added a summary channel that appears as the first channel in the DopeSheet. For now, this is disabled by default, but can be enabled using the 'Summary' toggle in the header between the mode selector and the standard filtering options. This has been done, since there is a possibility that it will make the DopeSheet run a bit slower.
In this channel you can do everything that you can normally do with DopeSheet channels (i.e. select, transform, edit, etc). It might be worth noting though that care probably needs to be taken when trying to use Copy/Paste, since that is still a bit fidgety...
In the process, I've fixed a few bugs, mostly with selection:
- Selecting keyframes in scene summaries wouldn't work
- Border select only worked in F-Curve and Group channels
Keymaps are now saveable and configurable from the user preferences, note
that editing one item in a keymap means the whole keymap is now defined by
the user and will not be updated by Blender, an option for syncing might be
added later. The outliner interface is still there, but I will probably
remove it.
There's actually 3 levels now:
* Default builtin key configuration.
* Key configuration loaded from .py file, for configs like Blender 2.4x
or other 3D applications.
* Keymaps edited by the user and saved in .B.blend. These can be saved
to .py files as well to make creating distributable configurations
easier.
Also, user preferences sections were reorganized a bit, now there is:
Interface, Editing, Input, Files and System.
Implementation notes:
* wmKeyConfig was added which represents a key configuration containing
keymaps.
* wmKeymapItem was renamed to wmKeyMapItem for consistency with wmKeyMap.
* Modal maps are not wrapped yet.
* User preferences DNA file reading did not support newdataadr() yet,
added this now for reading keymaps.
* Key configuration related settings are now RNA wrapped.
* is_property_set and is_property_hidden python methods were added.
- rename "Nurb" to "Spline" in RNA, eg. bpy.data.curves[0].splines[2].type == 'NURBS'
from a user perspective spline is a more generic term while Nurb is misleading when used for beziers and poly lines.
- added curve.active_spline property so the python UI can display the last selected curve.
- set the active spline when entering editmode (uses first selected spline)
- added back Hide Handles as a curve property (removed the global flag), access from the view panel in editmode.
- added hide normal option for curve, normal size access for curve and mesh display.
- changing orderU/V, endpoints, cyclic, bezierU/V now work in editmode and calls update functions.
- entering editmode was crashing with text objects
- curve.switch_direction() crashed (own fault from last commit)
- Tkey for tilt was overridden by Toolbar, made Tilt Ctrl+T.
- OBJECT_OT_mode_set check for compatible modes before running - so curves dont try go into paint mode with V key for eg.
It is now possible to tag certain keyframes as being 'breakdowns' in the DopeSheet. Breakdown keyframes are drawn as slightly smaller blue diamonds.
Simply select the relevant keyframes and use the RKEY hotkey (or from the menus, Key->Keyframe Type) to choose between tagging the keyframe as a 'proper' keyframe and a 'breakdown' keyframe.
Notes:
* Please note that this feature does not currently imply anything about breakdowns moving around keyframes or behaving any differently from any other type of keyframe
* In future, if there is any such need, more keyframe types could be added, though this is not really likely at all
Now the mute/protect/expand/etc. toggles are drawn using UI widgets. This means that special event handling code to determine when they were clicked on is no longer needed, and also means that there can now be tooltips for these items too.
Also, added visibility toggles for ID-block expanders, which will cause all the F-Curves in the linked datablock to not get drawn. The backend filtering code to make this work will come later...
* Fixed padding for Graph Editor visibility toggles
* Reverted many of the tweaks to Timeline UI for now (for the reasons outlined in earlier mail)
* NLA Editor now (mostly) uses the new channel-drawing API
Finally started refactoring the drawing code for animation editors so that all the drawing (of the channels/names list) is done using standardised code for all the editors.
A little specialised system for this has been made, and is now used for DopeSheet and Graph Editor drawing. This should make it easier to add new channel types with less effort.
Protect/mute toggles are now always clamped to the right-hand edge of the channels list. So you can now make the list wider to view longer names fully. However, since the mouse-handling hasn't been fixed yet, this won't always work.
TODOs:
* make mouse-click handling code use this system too, simplifying things to 1-2 lines of code there. Maybe this could be made to use UI widgets instead at a later date?
* NLA still needs to be ported to this system
* Cleaned up some parts of the code that were unused/could be done a bit nicer
* Added a new option for only showing the keyframes of the selected F-Curves in the Graph Editor, as another way of reducing the clutter.
* Insert Keyframes menu now only displays the 'active keyingset' entry when there are some KeyingSets.
* Moved the validation code for auto-blending/extend modes to NLA editor code, and included calls for this in many of the editing tools for NLA strips.
* Removed obsolete 'ID_IPO' entries from RNA-ID wrapping (these were commented out anyway).
I've gone through all the Animation Editor operators, making sure they send appropriate notifiers, and that these notifiers are handled.
* Added a separate category for animation-related notifiers, since the old-style ones attached to specific datatypes only was turning out to be not too feasible.
* For now, the focus has been on making sure that all Animation Editors update when there have been any potentially suitable changes at all. Later on, we can filter these more carefully to only take the ones we really need (for optimisation purposes)
Recoded the Transform code for NLA-Strips so that they can now be moved between strips and will not get truncated when they get moved into other non-moving strips.
Todos:
* The current code for moving strips between tracks is buggy (only goes up, and has a tendency to move up without being told to)
* Auto-snapping doesn't work yet...
* Made NLA Editing functions more aware of transitions.
- A transition can only be added between a pair of action-clips. Previous, two transitions could be added next to each other, which has undefined behaviour
- Deleting a strip with transition(s) on either side will remove the transitions too. Feedback welcome on this
- The 'type' setting for NLA-Strips is no longer editable. This was dangerous as it could result in transitions with undefined behaviour (though nothing would happen).
* Menus for adding F-Modifiers now only show relevant modifiers (i.e. 'Invalid' is not included in the list, and 'Cycles' doesn't need to be shown for NLA since we've got repeat)
* Function Generator and Noise F-Modifiers now have complete GUI's. A few settings were missed during the porting process.
* F-Modifier buttons now have their source-ID's included in the RNA Pointers used. This didn't get them animateable directly, but is a step closer.
* Most of the F-Modifiers have been ported to use the layout engine + RNA for drawing their buttons now. This plays much nicer with various button-layouts.
--> As a nice demo, try adding a Noise Modifier to a NLA-strip, and change the 'size' setting to about 2 to see some effects.
* Generator and Envelope modifiers haven't been ported yet since they're quite complex (requiring more time + energy), and as such, have been made to have some temporary error prints instead. Will check on this tomorrow.
* Finished/cleaned up the RNA-wrapping of most FModifiers.
TODO's (help requested... Brecht?):
Generator modifier's UI cannot be wrapped yet using the layout engine (though I might try using the old system only), as I'm having some trouble wrapping the coefficients array for this (see rna_fcurve.c - rna_def_fmodifier_generator())
* Using the Ctrl-Shift-M hotkey, F-Modifiers can be added to all the selected strips.
* F-Modifiers can also be added/tweaked from the NLA N-Key properties. The UI now uses the same code as for the graph editor ones.
The UI drawing here is currently messed up from the NLA side, since it seems combining normal layout stuff and old-style uiBlocks doesn't seem to work too well (BUT! the buttons are at least functional).
Next up, I'll need to recode the buttons panel for the Graph Editor so that all of the drawing can be migrated over to use the new layout engine.
* F-Modifier UI drawing/handling is now defined in a separate file so that it will be more suitable for inclusion into the NLA Editor's buttons.
* Started removing F-Curve dependence from the modifier drawing code, which wasn't strictly necessary
* Fixed F-Curve RNA wrapping to correctly use FPoints instead of the bulkier BPoints. Although nobody was likely to have encountered bugs here yet, this would almost certainly have contributed to some segfaults/data corruption along the track.
In TweakMode, the keyframes of the Active Action are now shown (and can be edited) in NLA-mapped time, with appropriate corrections applied when editing. This works in the DopeSheet and Graph Editors :)
To do this, got rid of the old wrappers/API-methods, replacing them with new-style ones. A few methods previously (in this branch) used only for evaluation are now used for this purpose too. As the same code is used for editing + evaluation, this should now be much better to work with.
I've only done a few brief tests now, but I think I might've muddled the invert-flags on one or two cases which I'll need to check out tomorrow. So, beware that there may be some weird and critical bugs for the next few days here...
Also, added proper license headers to new NLA files.
TODO:
- testing + bugfixing due to this commit
- show range of keyframes in NLA Editor active-action line
* Replaced old-style menu defines with the new-style Layout Engine ones. These are now much cleaner as a result :)
* Wrapped DopeSheet and Graph Editors in RNA to allow them to use the new Layout Engine for menu drawing
* Shortened the names of operators in the DopeSheet, removing the "keyframes" prefix since that's the only real context which can operate there.
* Standardised a few names, and renamed a confusingly named operator (cfrasnap -> jump to frame)
In this commit, I've introduced the mechanism by which actions already referenced by strips used in the NLA can be edited (or 'tweaked'). To use, simply select a strip you wish to edit, and hit that TAB key to start tweaking that strip's action, and hit TAB again once you're done.
What happens when you enter 'tweak mode':
1) The action of the active strip temporarily becomes the 'active action' of the AnimData block. You are now able to edit this in one of the Animation Editors (DopeSheet/Action, Graph Editors) as per normal (i.e. sliding keyframes around, inserting keyframes, etc.). The 'action-line' will therefore get drawn immediately above the active track containing the active strip, so that it's clear that that's what we're editing.
2) All the NLA-tracks (and all the strips within them) that occur after the track that the active strip lived in get disabled while you're in tweakmode. This is equivalent to travelling back to an earlier state in a construction history stack.
3) The active NLA track also gets disabled while in tweakmode, since it would otherwise interfere with the correct functioning of the tweaking for the action of interest.
4) The 'real' active action (i.e. the one displaced by the active strip's action) gets put into temp storage, and will be restored after you exit tweakmode.
5) Any strips which also reference the action being tweaked will get highlighted in red shading to indicate that you may be making some changes to the action which you don't really want to make for the other users too.
Please note though, that this is only a rough prototype of this functionality, with some niceties still to come. i.e.:
* NLA-tracks after the active track should still get drawn above the 'tweaking action line', but perhaps with different appearance?
* Various tools will still need awareness of this to prevent corrupting operations from taking place. How to proceed is still undecided...
* When exiting tweak-mode, the strip the action came from still needs some form of syncing with the modified action... there are a few tricky issues here that will need to be solved
* Evaluation code doesn't totally take this into account yet...
---
Also, fixed a number of bugs with various code (notably selection, and also a few drawing bugs)
* Added click-select/left-right select and deselect all/invert all selection operators. For now, these basic operators will suffice (more advanced selection operators will be coded at a later stage).
* Fixed a few bugs in DopeSheet found while coding the relevant tools for NLA.
* Added custom border-select operator for NLA channels (since the standard one assumes negative direction channel order)
* Added new API-method for NLA strips to check if the strip occurs within a given range, since this test needed to be performed in a few places...
* Tweaked the NLA Editor View2D ranges a bit to give saner default sizing. This still isn't right yet though.
- Completed cleaning up the drawing code so that F-Curves with modifiers now get drawn to reflect this.
- Added a temporary operator to add modifiers (hotkey Ctrl-Shift-M)
* Ctrl-Shift select for Action Groups works again
* Clicking on a channel's data will select it, and also make it the active one in the list now
* Selecting keyframes in F-Curves will select the F-Curve channel too now (+ make it active)
Currently, this is just used to print the 'name' of the active F-Curve in a panel for verification purposes. This is the recommended way of getting this info.
Now F-Curve channels in channels region are drawn with the same colour as their respective curve is drawn in the curves area. I've had to make a compromise to store such colour info in F-Curves themselves, which is not terribly ideal if the F-Curve gets reused in some way. However, for now, this will do (special tweaks can be made to make this work better though).
I've also added a colour-determination mode per curve which should in future allow more control over this. By default, all curves still use the old 'rainbow' style. The available types area:
* Old Rainbow - Colour is determined 'automatically' using a magic method which uses curve position + total curves to generate a colour.
* Auto RGB - Color is determined using the 'array index' stored in F-Curve for data-access. An unresolved issue with this is that all the curves with this will end up with exactly the same colour, leading to confusion (i.e. all location.x and scale.x properties could potentially all be the same red colour).
* Custom colour - self explanatory
Currently, there's a minor bug when loading old files where the colours don't get initialised yet. For now, just clicking in the Graph Editor after file-load will solve any of these problems.
Ton: it looks like area->refresh() isn't getting called after file read.
* Scene and World AnimDatas are now included in animation editors
* Keyframes for integer-value settings now get the FCURVE_INT_VALUES flag set for their F-Curves, which restricts those curves to only having integer-values. F-Curve displays have been altered accordingly, but some editing tools may still need tweaks to work with this.
* Fixed notifiers for Insert Keyframe -> Active Keying Set.
Render back! And not only back, even full threaded now. :)
Current state is unfinished, but too much fun to not to
commit for review and test!
WARNING: because render is in a threaded job, it will
use data as can be edited in the UI. That'll crash in many
cases of course... the idea is to limit UI usage to viewing
stuff, especially for the Image Window to inspect layers
or zoom in/out.
What works now;
- F12 render (no anim)
- ESC from render
- ESC pushes back temporary Image Window
- Render to ImageWindow or full-screen.
- Executing composites, and edit composites after render.
Note that the UI is 100% responsive in a render, you can
switch screens, slide area dividers around, or even load
a new file during render. :) It's quite stable even.
I'll collect all crash reports especially to get a good
picture of where the protection is required at least.
Also added: XKey "Delete Objects", to get things crash...
unfortunately it didn't for me.
* Drivers view in Graph Editor now displays drivers only, instead of displaying normal Animation data.
* 'Materials' channel is now only shown under an Object when there are Materials with animation data...
* Hid more debug prints behind debug flag. These should be removed...
* ShapeKey conversions should now go to the correct places
* Added fix for drivers to prevent crashes when no driver object is provided (Franky from BBB seems to have one such driver for some reason).
* Temporarily disabled a check when evaluating drivers for whether the driver is tagged for evaluation. Drivers still need to be correctly tagged AND ordered by the Depsgraph to work correctly.
