When adding a notifier, `reference` data can be passed. The notifier system
uses this to filter out listeners, for example if data of a scene changes,
windows showing a different scene won't get the notifiers sent to their
listeners.
For the `NC_SPACE` notifiers, a number of places also passed the space as
`reference`, but that wasn't used at all. The notifier would still be sent to
all listeners in all windows (and the listeners didn't use it either). Causing
some unnecessary updates (e.g. see ed2c4825d3).
With this commit, passing a space will make sure the notifier is only sent to
that exact space. Some code seems to already have expected that to be the case.
However there were some cases that passed the space as `reference` without
reason, which would break with this commit (meaning they wouldn't redraw or
update correctly).
Corrected these so they don't pass the space anymore.
Steps to reproduce were:
* Open an Asset Browser
* "Mark Asset" on some data-block
* Change the Asset Browser into a different editor (not File Browser!)
* "Clear Asset" on the data-block again, or mark another asset
* Change back to the Asset Browser, it will show an outdated list
Now the file-browser reloads local file data after spaces were changed. Note
that the current notifier code doesn't limit the space-change notifiers to the
affected spaces, so changing any visible space will trigger this. That's an
issue to be fixed separately.
The check for undo-depth increment/decrement assumed a newly loaded
window manager would have a different pointer.
This broke bl_animation_fcurves test indirectly,
the change to undo-depth caused the redo panel to attempt to popup
in background mode - which isn't supported.
Now the pointer is unchanged, the undo-depth is assumed to match
the value used when calling the operator.
The undo-depth is now properly maintained between file loads,
which is an improvement on the original behavior which reset it.
Keep the pointer location from the initial window-manager
between file load operations.
This is needed as the Python API may hold references to keymaps for e.g.
which are transferred to the newly loaded window manager,
without their `PointerRNA.owner_id` fields being updated.
Since there is only ever one window manager, keep the memory at the same location so the Python ID pointers stay valid.
Reviewed By: mont29
Ref D10690
Previously many operations would run on file load, even if the file
did not load. Pre/post load handlers were called, timers canceled,
all undo data freed, editors exited ... etc.
Now keep the blend file in it's current state.
This simplifies updating this area of code as there is one less
possible situation to account for.
Currently file loading performs almost all reloading logic
even in the case loading the file fails, causing the file to be in
a state that isn't well defined: undo is cleared, timers are canceled &
scripts are re-registered.
- Don't set G.relbase_valid until the file is loaded.
- Remove unnecessary string pointer comparison.
- Remove unused filename being passed to 'setup_app_data'.
`BKE_lib_override_library_main_resync` uses
`LIB_TAG_LIB_OVERRIDE_NEED_RESYNC` tags set by RNA override apply code,
and perform detection for the remaining cases (those were new overrides
need to be created for data that was not present before in the library).
And then it actually resync all needed local overrides.
Part of T83811 & D10649.
We can fairly easily detect some resync-needed cases when applying the
overrides operations on a Pointer RNA property.
This should cover all cases where an existing override's ID pointer is
changed in its linked data.
We still have to add code to detect when a not-yet-overridden linked ID
needs to become overridden (because its relations to other data-blocks
changed in a way that requires it).
Part of T83811 & D10649.
Rather than letting the `TreeElementAnimData` constructor take an ID from which
we get the animation-data based on an assumption on how it's stored, let the
constructor take the animation-data directly. That way we further centralize
the assumptions on the data passed to the element creation to
`tree_element_create()`.
The following commit will add a comment explaining the plan to entirely get rid
of those assumptions in the future.
There was an implicit assumption that tree element types using the new code
design set their name on creation. Use an assert to make this explicit. See
f59ff9e03a, which was an error because of this broken assumption.
Caused by 2e221de4ce in combination with 4292bb060d.
In the former I forgot to set the name for NLA actions in the new code design,
in the latter I made it an assumtion that tree element types using the new
design set the name.
The following commit will make this assumption explicit with an assert.
When loading a file with an asset browser open, and it showed a custom asset
library that can't be found currently (e.g. because the file is from somebody
else), the `BLI_assert(0)` in `rna_FileAssetSelectParams_asset_library_get()`
would fail.
There was code to handle this case already, but unlike I thought it didn't run
right after file read. Now it does.
The multi-input-socket cannot be connected to the same socket twice currently.
However, it is still possible to achieve this using an intermediate reroute node.
In this case the origin socket should be listed twice in the `linked_sockets_` list.
Higher level functions can still deduplicate the list of they want.
This commit adds an operator to the RMB-menu "Copy Full Data Path“,
to copy the full RNA path to the clipboard. It aims to complement
"Copy Data Path“, which only copies the part of the path that is needed
for drivers, but for writing addons, etc. it is useful to have an option that
gives the full data path.
Similar patch have been submitted before, see D763 and D2746
This time I did not split the operator (as D2746) and does not contain the UI reorganization (as D763)
Note, the fixes from D2746 were committed in rB09eac0159db8 so that patch can be closed.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D10539
This makes the hit delta threshold dependant on the ray angle.
If the ray is more aligned with the view, its intersection
threshold gets bigger to avoid going through geometry.
This improves reflections and fix T86448 refraction issue.
We now have a new buffer to output reflection depth. This buffer is
only usefull for non planar SSR but we use it to tag the planar rays.
This also touch the raytrace algo for planars to avoid degenerate
lines on vert sharp reflections.
This changes the sampling routine to use the method described in
"A Simpler and Exact Sampling Routine for the GGXDistribution of Visible Normals"
by Eric Heitz.
http://jcgt.org/published/0007/04/01/slides.pdf
This avoids generating bad rays and thus improve noise level in screen-
space reflections / refraction.
This changes the hitBuffer to store `ReflectionDir * HitTime, invPdf`
just as the reference presentation.
This avoids issues when the hit refinement produce a coordinate that
does not land on the correct surface.
We now store the pdf in the same texture and store it inversed so we can
remove some ALU from the resolve shader.
This also rewrite the resolve shader to not be vectorized to improve
readability and scalability.
Since rBb279fef85d1a, the nodes properties for geometry nodes using a
texture are displayed in the Properties Editor.
It was possible to create recursive nodetrees when choosing the 'root'
nodegroup in the node link menu though leading to a crash.
Now poll if a group node of a particular node could actually be added to
the current tree.
Also check if the tree types actually match.
Maniphest Tasks: T86416
Differential Revision: https://developer.blender.org/D10671
This way we get a choice when we click on node links in the Properties
Editor.
This also changes some of the more permissive poll functions on some
nodes back to being "shading-only" (these were made permissive in
rBb78f2675d7e5 for simulation nodes, but have not found their way into
geometry nodes yet).
ref b279fef85d / T86416 / D10671
Maniphest Tasks: T86416
Differential Revision: https://developer.blender.org/D10673
This conversion works the same way as a combination of the existing
color to float3 to boolean conversions, so the boolean result will be
false if the color is black, otherwise true, and the alpha is ignored.
This Patch removes the auto sorting from Multi-Input Sockets and allows
the links to be sorted by drag and drop instead.
As a minor related change, it fixes the drawing of the mute line to
connect to the first input instead of the socket's center.
This implements the MVP for the new spreadsheet editor (T85879). The functionality
is still very limited, but it proved to be useful already. A more complete picture
of where we want to go with the new editor can be found in T86279.
Supported features:
* Show point attributes of evaluated meshes (no original data, no other domains,
no other geometry types, yet). Since only meshes are supported right now, the
output of the Point Distribute is not shown, because it is a point cloud.
* Only show data for selected vertices when the mesh is in edit mode.
Different parts of Blender keep track of selection state and original-indices with
varying degrees of success. Therefore, when the selected-only filter is used, the
result might be a bit confusing when using some modifiers or nodes. This will
be improved in the future.
* All data is readonly. Since only evaluated data is displayed currently, it has to
be readonly. However, this is not an inherent limitation of the spreadsheet editor.
In the future editable data will be displayed as well.
Some boilerplate code for the new editor has been committed before in
rB9cb5f0a2282a7a84f7f8636b43a32bdc04b51cd5.
It would be good to let the spreadsheet editor mature for a couple of weeks as part
of the geometry nodes project. Then other modules are invited to show their own data
in the new editor!
Differential Revision: https://developer.blender.org/D10566
Note, this does not allow users to connect the same socket more than once to
a multi-input-socket in the UI. However, the situation could still happen when
using node muting.
Properties Editor
Since rBb279fef85d1a, the nodes properties for geometry nodes using a
texture are displayed in the Properties Editor.
rB85421c4fab02 added an attribute search button, but this was missing
still (gave just the regular text button) if this was displayed in the
Properties Editor.
ref b279fef85d / T86416 / D10671 / D10673
Maniphest Tasks: T86416
Differential Revision: https://developer.blender.org/D10674
