Previously the option in the camera's //Object Data Properties > Viewport Display
> Sensor// would not display the sensor in camera view. This seemed to be caused
by the theme color `TH_VIEW_OVERLAY` having zero set for the alpha channel and
alpha blending being active, resulting in no visible output. Hence
`immUniformThemeColorShade(TH_VIEW_OVERLAY, 100);` is replaced with
`immUniformThemeColorShadeAlpha(TH_VIEW_OVERLAY, 100, 255);`.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11075
None of these generic poll functions had NULL pointer checks,
since all operators that use these functions expect a valid constraint,
modifier .. etc. Add the NULL check to the poll function.
Ref D11126
Reviewed By: mont29, Severin
FLT_EPSILON was added to the threshold when comparing values,
this caused problems selecting similar small faces since the areas
can be very small in this case.
Also increase the displayed precision so it's easier to use
smaller numbers.
When an aligned (or auto) handle was snapped with only the control
point selected, it would not snap to the correct point, but offset. This
was because the handles were not considered selected. The `TD_SELECTED`
flag was not being set.
The fix makes sure that we include the handles in the selection when
the handle is aligned or auto.
Reviewed By: antoniov
Maniphest Tasks: T86881
Differential Revision: https://developer.blender.org/D11111
Face set visibility is already flushed to all mesh elements in the right
way in SCULPT_visibility_sync_all_face_sets_to_vertices, calling
BKE_mesh_flush_hidden_from_verts is legacy code from the previous
visibility system that was causing the vertex visibility to take
priority over face sets. When hidding a single loop, all vertices of
those faces are still visibile, so this line was tagging all loop faces
visible. This was leaving mesh/face set visibiltiy in an unconsistent
state.
Reviewed By: JacquesLucke
Maniphest Tasks: T87474
Differential Revision: https://developer.blender.org/D11008
This was just not implemented for curve strokes when world spacing was
introduced in rB87cafe92ce2f.
Now do the equivalent of what was done in said commit in
'paint_space_stroke', now in 'paint_line_strokes_spacing' as well.
Maniphest Tasks: T87815
Differential Revision: https://developer.blender.org/D11098
This patch fixes the remaining issues described in T87749. The jitter
was caused by inconsistent rounding when using the floats icon_size
and icon_padding to offset the bound for the text drawing. Using
`round_fl_to_int` leads to consistent results and fixes the jitter
that remained in some buttons with icons, UI lists, and breadcrumbs.
Differential Revision: https://developer.blender.org/D11062
The trouble was that there was a context pointer "modifier" in the
property editor context that returned the active modifier. But the
"modifier" variable was already used in many places, for pointers
that are *not* equivalent to the active modifier.
The context pointer for the active modifier was unecessary anyway.
If we need to access a context pointer for the active modifier in the
property editor then we can add it. Until then it only adds confusion.
Caused by {rB278011e44d43}.
Framebuffer management since above commit now seems to require region
bind/unbind in for the operator to be able to redraw correctly without
using the same framebuffer in multiple contexts.
Maniphest Tasks: T87771
Differential Revision: https://developer.blender.org/D11084
Calculation of bounding rect for multi-input socket was wrong.
Reviewer: Hans Goudey (HooglyBoogly)
Differential Revision: https://developer.blender.org/D11077
This patch fixes jittering text when resizing regions of the UI as
described in T87749. The jitter was caused by the text padding
being stored as an integer which lead to inconsistent rounding.
Most notably this patch fixes the jitter in the new spreadsheet editor,
but not all occurrences of jitter described in T87749 (e.g. in UI lists)
are addressed.
Differential Revision: https://developer.blender.org/D11060
The code of the snapping system to interact the objects in the scene only
considers instances what comes from "DUPLI" objects.
This commit adds instances coming from Geometry nodes.
Differential Revision: https://developer.blender.org/D11020
Always use the defaults here (radius, depth etc), since desired bounds
have been set interactively, it does not make sense to use a different
value from a previous command.
The Cube tool has already seen a fix for this in rB26e5718e29a7, but
Cone/UVSphere/Cylinder/IcoSphere havent.
Maniphest Tasks: T87677
Differential Revision: https://developer.blender.org/D11038
Properties Editor is a bit more picky (compared to the Outliner for
example) when it comes to listening to grease pencil notifiers -- it
requires the action to be set.
So when adding the notifier in the dopesheet from the channels (done in
`achannel_setting_flush_widget_cb`), now add the `NA_EDITED` action.
Maniphest Tasks: T87640
Differential Revision: https://developer.blender.org/D11025
If a new action is created (e.g. by inserting keyframes), the header was
not garuanteed to display the right action.
Notifiers were fine here, redraw took place, the editors action was just
not set soon enough for the drawing.
Now make sure this is set correctly by ensuring the animation context is
right (same as the other editor regions do before drawing).
Maniphest Tasks: T86809
Differential Revision: https://developer.blender.org/D10796
The function applying the search used the dummy search info for when
the item doesn't exist even when there was no UI data associated with
the node at all.
A fix is to only add the search menu when there is attribute info
stored for the node. This is something I wanted to do anyway, since
it makes it look more purposeful when there are no attribute info
for a node, less like a bug.
Differential Revision: https://developer.blender.org/D11016
The problem is that each uiBlock needs to be assigned a unique name,
but when there can be multiple modifiers of the same type, we use the
panel sort order for the unique part of the string. However, the most
recent test file has 1200+ panels in the property editor, so 4
characters isn't enough for a unique string.
That's not a situation I expected, but it makes sense, because we don't
remove legacy panels with unused types when loading old files. So they
tend to accumulate a bunch of unused panels. That's why this works fine
with a new property editor, it doesn't all of the extra old panels.
These panels must be stored for the expansion status and order, but
arguably we could cull unused panels on save. However, simply increasing
the length of the unique panel string is a valid fix in this situation.
In the future, we can look into removing unused panels when saving.
It is important to limit the pixels read on `BLI_array_iter_spiral_square`.
Fortunately `ED_view3d_depth_read_cached` was not being called with a
`margin` parameter.
Wrong logic introduced in rB44c76e4ce310.
Now if one stroke in the extremes of the stack is selected, other strokes are moved.
Reviewed By: pepeland, Dantti
Maniphest Tasks: T87321
Differential Revision: https://developer.blender.org/D10997
When inserting a node on top of a link, the multi input socket
indices weren't updated. This fixes that and keeps the relative
order of the links the same.
Author: Wannes Malfait
Reviewed By: Fabian Schempp
Differential Revision: https://developer.blender.org/D10969
T87356 occured because last_node_hovered_while_dragging_a_link was not
set on node_link_init.
The assert in T87358 failed because the sorting operation was called even
if the drag link contained a link to another socket.
A little one frame jump was caused because frame was refreshed after
picking a link and before sorting happened.
Reviewer: Hans Goudey
Differential Revision: https://developer.blender.org/D10940
