Extract:
- Sculpt filter types from the Sculpt menu. Some of these types use a
custom label, different from those defined in the operator RNA,
which was never extracted.
- "Today" and "Yesterday" from the file browser modification date.
- All name_plural from IDs, as these are used in the UI to list which
data block is to be removed, when calling outliner.orphans_purge.
Disambiguate:
- "Area", meaning the measurement of a surface as opposed to a place.
Some messages reported by Satoshi Yamasaki in #43295.
Pull Request: https://projects.blender.org/blender/blender/pulls/113912
Use "Hair Curves" instead of just curves, to clarify that it's just the
new curves system that's supported, not the legacy one. When the
old one is removed, the label will be changed to just say "Curves"
again.
Adds a "Select by Attribute" operator as mentioned in the discussion in
#105317. This is done in 4.0 to limit the breaking aspect of the removal
of face maps. The selection storage functionality is replaced by boolean
attributes. We already have a way to control the data in the boolean
attribute with the "Set Attribute" operator, but we didn't have a way to
convert the attribute into a selection.
This operator works on the active attribute if is a boolean attribute
and isn't on the face corner domain. It adds to the existing selection
similar to other existing operators.
While this behavior can be recreated as a node tool, we add it as a
builtin operator here to avoid limitations of the new node-based
tool system and to make the late-in-the-release-cycle change safer.
Pull Request: https://projects.blender.org/blender/blender/pulls/113772
After the recent introduction of node panels, the utility that
allowed scripters to connect sockets to or from a virtual socket was
broken. This happens when creating an interface before connecting
sockets. Sockets can have a subtype, while interfaces cannot.
For instance, the `NodeSocketFloatFactor` type cannot be used
directly, it has to be converted to `NodeSocketFloat`.
This commit chooses an appropriate type for the new interface before
creating it, based on the socket's `type` property.
Pull Request: https://projects.blender.org/blender/blender/pulls/113630
The menu structure currently needs to be duplicated in the code to avoid
adding assets to more than one menu. This was done for geometry nodes
in b49c84276c but was missed for the compositor and shader
nodes. Also remove an unnecessary separator.
Regression caused by [0]. Resolve by adding a 'keep_properties' argument
to KeyConfig.update so the key-map items can be restored after the
operators have been reloaded.
[0]: 88a875ec3a
Continue allowing spacebar search for all dropdown and context menus,
but also add the ability to allow some menus to have type to search,
like Add Modifiers, Objects, Nodes.
Pull Request: https://projects.blender.org/blender/blender/pulls/113520
In !112591, nodes got the ability to group sockets into panels. The
labels for these sockets are automatically shortened if they begin
with the same text as their parent labels. For instance, "Transmission
Weight" will be shortened to just "Weight" because it is under the
"Transmission" panel.
While this is a good heuristic for English, it breaks down in
languages which do not have the same word order.
This commit adds a `.short_label()` callback to socket declarations so
that a shortened label can be explicitly declared.
It also adds two regexps to the translation script so that these new
fields can be extracted to the .po translation files. One extracts the
label with a translation context, the other without. Only the one
without context is currently in use.
The current automatic shortening logic is kept and will be used only
if a shortened label is not manually provided.
Fixes#112970: Node socket labels under panels are not shortened when
translated.
Pull Request: https://projects.blender.org/blender/blender/pulls/113070
Follow-up fix for #113330.
The `valid_socket_type` classmethod in node trees is only available on
custom node trees (but documentation does not say that). It cannot be
used to determine if the default float socket type is valid for built-in
node tree types. We have to assume this socket type is always valid for
built-in node trees, or the operator will try to call a non-existent
method.
Pull Request: https://projects.blender.org/blender/blender/pulls/113540
Caused by 974edc5885 / 7f9d51853c
You can now type to search directly in the `Add` menu.
Bit unfortunate though that this is not mapped to any shortcut in the
`Industry Compatible` keymap anymore
I think we could just add TAB back (but this time, mapped to
`NODE_MT_add`).
Pull Request: https://projects.blender.org/blender/blender/pulls/113446
Custom node trees may not suppor the default NodeSocketFloat socket
type. In case this default type is not supported, search all registered
socket types and pick the first one that is supported by the custom
node tree.
Pull Request: https://projects.blender.org/blender/blender/pulls/113330
The issue was that the code filtered for selected channels,
while the expectation was that it would only filter for selected keys.
This PR changes the behavior of the operator in the following way:
* when "Clean Channels" is **disabled**, it will clean only selected keyframes, regardless of the channel selection
* when "Clean Channels" is **enabled**, it will clean selected channels regardless of keyframe selection
The same logic was applied to the Graph Editor code.
It only makes a difference in the case when "Clean Channels" is enabled.
That is because channels were automatically selected when a key was selected.
In addition to that I moved the menu entry for "Clean Channels" to the channel menu
to reduce confusion.
Another solution would have been to make the Dope Sheet select channels
when keys are selected. This might still be done in the future, but I think the
only correct fix is to change the actual operator behavior.
Pull Request: https://projects.blender.org/blender/blender/pulls/113335
So far, when the toolbar was visible, the tool settings header would show empty
space instead of the tool icon. This was probably to avoid jumping of the
layout. However this empty space looks quite jarring, and alignments in that
corner are all over the place with it (causing visual noise). On the other hand
the jumping seems like a minor problem, it's quite subtle, esp since the
viewport overlay text does a similar jump. Having the icon appear and disappear
based on the toolbar visibility also causes visual distraction, so the problem
was mitigated at best.
Pull Request: https://projects.blender.org/blender/blender/pulls/112972
Reports from the internal operator weren't forwarded to the Python
operator, they were printed in the console instead.
Resolve by moving the operator to C++, use a utility function
to launch the external editor instead of an operator.
Nodes recently gained the ability to group inputs into collapsible
panels. These were untranslated, so this commit:
- Adds the appropriate regex to extract node panels defined with
the `add_panel()` callback.
- Adds the `IFACE()` translation macro to the drawing code for the
nodes, as well as the properties.
Pull Request: https://projects.blender.org/blender/blender/pulls/112968
These four languages now have some translated strings, so time to show
them in Blender.
NOTE: effect will take place after next week's update in official
Blender builds.
This is because the menu entry was using different operator
properties from what the shortcut is defined for. It was needed
to make it so an operator which is called from the menu does not
have dependency on the mouse location.
Now it is achieved by resolving MOUSE side to RIGHT from the
operator's exec().
Ref #112598
Pull Request: https://projects.blender.org/blender/blender/pulls/113143
The `armature.bones["name"].color` property is *the* bone color, which is
intended to be used as the primary way of coloring bones. THis is now
reflected better in the UI.
The per-armature-object bone color (i.e. `ob.pose.bones["name"].color`) is
seen as a secondary.
Add the 'move bone to collection' operator to the pose mode menu. It was
already in the armature edit mode menu.
The operator was already available in the pose mode keymap, it just wasn't
discoverable via the menu.
Separate user configuration of subpixel antialiasing from the hinting
options. For example, this allows turning this on while hinting is
"None", or off when hinting is "Full".
Pull Request: https://projects.blender.org/blender/blender/pulls/113027
Make the Ctrl+ACCENT_GRAVE hotkey call the 'show all bone collections'
operator (`armature.collection_show_all`), instead of 'show all armature
layers' (`armature.layers_show_all`).
This was the last reference to `armature.layers_show_all`, and the operator
has been removed.
In the Armature properties, rename the 'Skeleton' panel to 'Pose'. This
panel used to house the armature layers, but they have been transformed
into bone collections, which have their own panel. Also the term 'skeleton'
is not used in Blender, so having that as title here felt out of place.
There are some ideas to introduce different 'poses', to disconnect the
mesh binding pose from the animation reference pose. This rename sets
things up for exposing such functionality.
Add an overview of those bone collections the active/pinned bone is
assigned to.
This overview was originally there, showing the armature layers and the
bone group. This is now replaced by a list of the bone's collections. The
only possible interaction is unassigning the bone & toggling visibility
of the bone collections.
Move operators that act on the active bone collection to a 'specials'
context menu, just like other UILists.
The menu now contains:
- Solo the active bone collection (i.e. make it visible and hide others).
- Show all bone collections.
Avoid an error when drawing the Lattice properties panel. The code for
drawing mesh attributes warnings didn't account for the fact that lattices
also have vertex groups, and thus that particular code can be called
without an active mesh.
With armature layers it was possible to, with one click, show a single
layer and hide all the others. This is now possible with bone collections
as well.
For that I added a new operator `armature.bone_collection_solo_visibility`,
with a button next to the list of bone collections. The icon is
`SOLO_ON`, which is also used in the NLA.
Blender's "Copy to Selected" feature only copies single properties, while
bone colors consist of four properties (palette + 3 custom colors). These
can now be copied with a single click.
