And remove Blender preference, which was expected to be set to match the system
preference for correct behavior. Instead just handle this automatically.
Differential Revision: https://developer.blender.org/D9402
Move the "Show Group Colors" toggle from a per-editor option to a single
user preference in the Animation preferences. The Grease Pencil
animation channel side panel allows picking a channel color; this now
shows a message when channel colors are disabled.
The old "Show Group Colors" toggle had to be set per editor, and was on
by default. This meant that disabling group colors would require an
action for every file, for every editor. It is very hard to select a
color that works both as bone color in the 3D Viewport (needs to be
bright there) as well as the channel list (needs to be dark there), most
animators turn channel list colors off.
Differential Revision: https://developer.blender.org/D9391
This adds a Box option to the Text strip's style properties, plus related Box Margin value:
{F9208309}
When enabled the text is placed on top of a solid-filled rectangle of a chosen color, as shown below:
{F9208324}
When the box option is disabled the text strip works the same as it does now. When the box option is enabled the meaning of the Shadow option changes to provide a drop-shadow on the rectangle (and not on the text itself). The latter made more sense to me.
The box margin is specified as a fraction of the image width. The offset of the drop-down box shadow is fixed to a specific fraction of the image width as well.
I tested this feature on a movie of a couple of minutes containing dozens of text strips (all with box background), edge cases like multi-line strings and text overlapping the image edges.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D9468
This fix makes sure new files save `wmWindow.global_areas` under a different
name, so old Blender versions don't recognize and 0-initialize it.
Since enabling global area writing (ef4aa42ea4), loading a file in old
Blender versions would cause `wmWindow.global_areas` to be read, because there
was already reading code for it and `ScrAreaMap` was in SDNA.
However the `ScrArea.global` of the global areas would be NULL, because it was
*not* in SDNA (`ScrGlobalAreaData` was excluded).
Now, issue is that the code assumes that areas in the global area-map have a
valid ScrArea.global pointer.
Think this was a mistake in rB5f6c45498c92. We should have cleared all this data
on reading, until the global area writing was enabled.
Differential Revision: https://developer.blender.org/D9442
Reviewed by: Brecht Van Lommel
Use common prefix as this collided with existing API's (eg BLI_voronoi).
Also expand some non-obvious abbreviations:
- 'g' -> 'generic'
- 'vl' -> 'variable_lacunarity'
- 'V' -> 'v3'
"Camera Parent Lock" can be useful when rigging cameras, but it is not
intuitive, and has also generated a lot of confusion (bug reports).
This is because it breaks the fundamental parent <-> child relationship
conventions in Blender, and there is no indication that it's intended
without diving into the preferences.
This commit moves the setting to the object level, and exposes it in
the relations panel in the property editor. It is exposed for every
object type because any object type can be "View Locked" in the 3D view.
The property description is also updated to reflect this change and be
more specific without getting too long.
In the future this could become a more general feature of the transform
system, but for now it is limited to "Lock Camera to View".
Differential Revision: https://developer.blender.org/D9239
Fixes 18 misspellings of 'predefined', 'Look Up', 'Lookup', and 'No One'.
Differential Revision: https://developer.blender.org/D9466
Reviewed by Hans Goudey
This patch allows the user to type a property name into the
Attribute node, which will then output the value of the property
for each individual object, allowing to e.g. customize shaders
by object without duplicating the shader.
In order to make supporting this easier for Eevee, it is necessary
to explicitly choose whether the attribute is varying or uniform
via a dropdown option of the Attribute node. The dropdown also
allows choosing whether instancing should be taken into account.
The Cycles design treats all attributes as one common namespace,
so the Blender interface converts the enum to a name prefix that
can't be entered using keyboard.
In Eevee, the attributes are provided to the shader via a UBO indexed
with resource_id, similar to the existing Object Info data. Unlike it,
however, it is necessary to maintain a separate buffer for every
requested combination of attributes.
This is done using a hash table with the attribute set as the key,
as it is expected that technically different but similar materials
may use the same set of attributes. In addition, in order to minimize
wasted memory, a sparse UBO pool is implemented, so that chunks that
don't contain any data don't have to be allocated.
The back-end Cycles code is already refactored and committed by Brecht.
Differential Revision: https://developer.blender.org/D2057
This is essentially adding that new callback, and using it only for already
existing Scene's 3DCursor.
Note that the place where this is called has been moved again, after all
have been lib-linked, such that those callbacks may also work on ID pointers.
Maniphest Tasks: T71759
Differential Revision: https://developer.blender.org/D9237
This addition to the filters allows the user to enable the
outliner tree to restrict the listing to only Selectable objects.
Differential Revision: https://developer.blender.org/D7310
`WM_operator_properties_filesel()` allows C operators to set a display or sort
type for the File Browser to use. But the File Browser would always override
that because of an invalid `_is_set()` check. (The operators don't actually set
the value, they only set the property's default value.)
The only operator affected by this is "Recover Auto Save". It is supposed to
show a vertical list ordered chronologically. It used settings from the
previous File Browser usage before this patch.
Operators using the File Browser should generally use
`FILE_DEFAULTDISPLAY`/`FILE_SORT_DEFAULT` now, except if they have a reason not
to. See comments at their definition.
----
This makes it so operators that set a different display or sort type
don't change the sort or display type for the next File Browser operation.
So using "Recover Auto Save" entirely isolates display and sort type from other
operations.
Differential Revision: https://developer.blender.org/D8598
Reviewed by: Bastien Montagne
This patch changes behavior of strip transform and crop feature.
Purpose of this change is to allow display arbitrary portion of input
image, simplify user interface and workflow.
Offset and Crop values in old files are converted in versioning.
Offset animation is also converted. Crop animation and animation of
crop or offset enable properties is not taken into account
Changes in behavior and interface:
- If image is added to timeline it is scaled to fit inside preview area
while maintaining aspect ratio. Image is centered. This is considered
as a baseline for further transformation.
- Scale and rotation was added, so it is possible to transform image at
it's original resolution.
- Crop will not affect image transformation (does not move image).
- Values of Crop and Transform Position are in pixels, these values are
corrected if preview is fraction of project resolution.
- Transform and Mirror panel has been removed and new Transform panel
and Crop panel is moved to Adjust panel. Mirror is now part of new
Transform panel.
Technical changes:
- Preprocessing stage must work on duplicated image, because original is
cached. Previously Crop and Offset could run at once and required only
one duplication of image. This is not the case with new algorithms, so
duplication on demand is implemented. Transformation can read original
image and will output new image that is safe to modify. It should be
possible to add crop step to transform algorithm, so that Crop won't
require previous duplication though.
- Use Crop and Use Translation checkboxes were removed. Individual
values are compared to default values to check if image needs to be
processed. In case of transform this will be done also if resolution of
source.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8393
This patch changes behavior of strip transform and crop feature.
Purpose of this change is to allow display arbitrary portion of input
image, simplify user interface and workflow.
Offset and Crop values in old files are converted in versioning.
Offset animation is also converted. Crop animation and animation of
crop or offset enable properties is not taken into account
Changes in behavior and interface:
- If image is added to timeline it is scaled to fit inside preview area
while maintaining aspect ratio. Image is centered. This is considered
as a baseline for further transformation.
- Scale and rotation was added, so it is possible to transform image at
it's original resolution.
- Crop will not affect image transformation (does not move image).
- Values of Crop and Transform Position are in pixels, these values are
corrected if preview is fraction of project resolution.
- Transform and Mirror panel has been removed and new Transform panel
and Crop panel is moved to Adjust panel. Mirror is now part of new
Transform panel.
Technical changes:
- Preprocessing stage must work on duplicated image, because original is
cached. Previously Crop and Offset could run at once and required only
one duplication of image. This is not the case with new algorithms, so
duplication on demand is implemented. Transformation can read original
image and will output new image that is safe to modify. It should be
possible to add crop step to transform algorithm, so that Crop won't
require previous duplication though.
- Use Crop and Use Translation checkboxes were removed. Individual
values are compared to default values to check if image needs to be
processed. In case of transform this will be done also if resolution of
source.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8393
There should not be much user visible here (other than T73668 being addressed).
I added the writing code already for the initial implementation of workspaces,
but we decided to keep it disabled until the top-bar design is more clear. It
was never planned to keep this disabled for so long.
Fixes T73668.
This commit uses an enum to access expansion for specific panels for
each modifier, constraint, etc. Even though these values are quite simple,
this can help make the code more explicit when the ui_expand_flag is
accessed directly. Also update comments about this bitfield to make
them consistent.
Previously, only predefined and limited set of intrinsics combinations
could have been refined. This was caused by a bundle adjustment library
used in the early days of the solver.
Now it is possible to fully customize which intrinsics are to be refined
during camera solving. Internally solver supports per-parameter settings
but in the interface they are grouped as following:
* Focal length
* Optical center
* Radial distortion coefficients (which includes k1, k2, k3, k4)
* Tangential distortion coefficients (which includes p1, p2)
Differential Revision: https://developer.blender.org/D9294
The simple subdivision as a type only causes issues like no-continuous
normals across edges, inability to reliably switch the type and things
like this.
The new subdivision operators supports wider variety of how to add
details to the model, which are more powerful than a single one-time
decision on the subdivision type.
The versioning code is adjusting topology converter to specify all
edges as infinitely sharp. The reason for this (instead of using
settings.is_simple) is because in a longer term the simple subdivision
will be removed from Subsurf modifier as well, and will be replaced
with more efficient bmesh-based modifier.
This is finished up version of D8436.
Differential Revision: https://developer.blender.org/D9350
This adds a property to the grab that masks vertices based on its
original normal and grab delta. When used on thin meshes, it allows to
grab the silhouette from one side of the object without affecting the
shape of the other side.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9205
All tools planned for 2.91 now have icons, so this option can be
removed.
Reviewed By: dfelinto, Severin
Differential Revision: https://developer.blender.org/D9299
It was rather a huge chunk of code, which started to become
more harder to maintain with the transition to OpenSubdiv based
implementation. Because of this transition, the compatibility was
also rather on a poor side.
Remove compatibility support for pre-2.50.9 multires.
Ref T77107
Reviewed By: brecht, mont29
Differential Revision: https://developer.blender.org/D9238
Those two features are not directly related and one might be activated
in master earlier than the other.
WITH_PARTICLE_NODES was removed, because we continue the project
under the name "Geometry Nodes".
Being able to adjust the distance between fluid and obstacles comes in handy when trying to achieve a fluid motion over inclined obstacles.
Depending on the slope of such obstacles, already small adjustments of this value can help when particles stick to obstacle surfaces (i.e. make particles not stick to obstacles).
With D8234 a new drawing method for UV/Image editor was introduced. For debugging
reasons we left the old drawing method in the code base. This patch will remove
the old drawing method.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D9011
The design for how we approach the "Everything Nodes" project
has changed. We will focus on a different part of the project initially.
While future me will likely refer back to some of the code I remove here,
there is no point in keeping this code around in master currently.
It would just confuse other developers working on the project.
This does not remove the simulation modifier and data block. Those are
just cleaned up, so that the boilerplate code can be reused in the future.
This changes how the simplify volumes setting works. Before, it only
affeted viewport rendering. This was an issue, because all internal
computations would still have to happen on the high resolution volumes.
With this patch, the simplify setting already affects file loading and
procedural generation of volumes.
Rendering does not have to care about the simplify option anymore,
it just gets the correct simplified version from the depsgraph.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D9176
This adds a smooth deformation type to the boundary brush, which smooths
the boundary and has a regular falloff towards the inside of the mesh.
For smoothing, only vertices parallel to the boundary are taken into
account, creating this effect.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9204
Corrects incorrect usage of contraction for 'it is', when possessive 'its' was required.
Differential Revision: https://developer.blender.org/D9250
Reviewed by Campbell Barton
This modifier is the opposite of the recently added Mesh to Volume modifier.
It converts the "surface" of a volume into a mesh. The "surface" is defined
by a threshold value. All voxels with a density higher than the threshold
are considered to be inside the volume, while all others will be outside.
By default, the resolution of the generated mesh depends on the voxel
size of the volume grid. The resolution can be customized. It should be
noted that a lower resolution might not make this modifier faster. This
is because we have to downsample the openvdb grid, which isn't a cheap
operation.
Converting a mesh to a volume and then back to a mesh is possible,
but it does require two separate mesh objects for now.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D9141
This adds support for pen tilt in sculpt mode. For now, pen tilt is used
by tweaking the tilt strength property, which controls how much the pen
angle affects the sculpt normal. This is available in Draw, Draw Sharp,
Flatten, Fill, Scrape and Clay Strips brushes, but it can be enabled in
more tools later.
The purpose of this patch is to have a usable implementation of pen tilt
in a painting mode, so users can test and see in which hardware and
platforms this feature is supported and how well it works. If it works
ok, more tools and features that rely on pen tilt can be implemented,
like brushes that blend between two deformations depending on the angle.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8893
