The goal is to solve confusion of the "All rights reserved" for licensing
code under an open-source license.
The phrase "All rights reserved" comes from a historical convention that
required this phrase for the copyright protection to apply. This convention
is no longer relevant.
However, even though the phrase has no meaning in establishing the copyright
it has not lost meaning in terms of licensing.
This change makes it so code under the Blender Foundation copyright does
not use "all rights reserved". This is also how the GPL license itself
states how to apply it to the source code:
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software ...
This change does not change copyright notice in cases when the copyright
is dual (BF and an author), or just an author of the code. It also does
mot change copyright which is inherited from NaN Holding BV as it needs
some further investigation about what is the proper way to handle it.
For example
```
OIIOOutputDriver::~OIIOOutputDriver()
{
}
```
becomes
```
OIIOOutputDriver::~OIIOOutputDriver() {}
```
Saves quite some vertical space, which is especially handy for
constructors.
Pull Request: https://projects.blender.org/blender/blender/pulls/105594
This patch implements the Anti-Aliasing node by porting SMAA from
Workbench into a generic library that can be used by the realtime
compositor and potentially other users. SMAA was encapsulated in an
algorithm to prepare it for use by other nodes that require SMAA
support.
Pull Request: https://projects.blender.org/blender/blender/pulls/106114
This allows adding spans, arrays, etc. directly to SculptSession, which
simplifies accessing mesh data, especially in #105938. A few files
aren't moved to C++ yes, so I had to add three C accessor functions.
Workaround for compiler issue on AMD
platforms resulting in the erroneous
discarding of valid rays in fragment
raytracing.
Authored by Apple: Michael Parkin-White
Pull Request: https://projects.blender.org/blender/blender/pulls/105967
Add control over how bone relation lines are drawn. Instead of always
drawing from the head of the child to the tail of the parent, give users
a choice for the parent side of the line. This can now be toggled
between the head and the tail of the bone, where the tail is Blender's
original behaviour and is retained as default value.
Pull request: https://projects.blender.org/blender/blender/pulls/105427
Translating an image in fullframe compositor now also translates
the backdrop image for the viewer node.
Attached gif shows the behavior. Notice how gizmo moves with correct
values with the image but the frame stays to indicate what will get
rendered.
Note: This patch is a continuation of [D12750]
(https://archive.blender.org/developer/D12750). In a previous patch,
display offset on screen was not computed correctly. This has now
been fixed.
Pull Request: https://projects.blender.org/blender/blender/pulls/105677
Use C++ types for more automatic memory management, simpler code,
and easier potential performance improvements. Also document each
item in the cache and access a named struct by pointer for the "poly
sorted" instead of using an identical unnamed struct.
Add `index_range()` and `is_empty()` functions, rename `ranges_num()`
to `size()` (clarifying the final extra integer as an implementation
detail). Also remove the `size(index)` function which gave almost the
same assembly as `[index].size()` (https://godbolt.org/z/PYzqYs3Kr).
Implements #102359.
Split the `MLoop` struct into two separate integer arrays called
`corner_verts` and `corner_edges`, referring to the vertex each corner
is attached to and the next edge around the face at each corner. These
arrays can be sliced to give access to the edges or vertices in a face.
Then they are often referred to as "poly_verts" or "poly_edges".
The main benefits are halving the necessary memory bandwidth when only
one array is used and simplifications from using regular integer indices
instead of a special-purpose struct.
The commit also starts a renaming from "loop" to "corner" in mesh code.
Like the other mesh struct of array refactors, forward compatibility is
kept by writing files with the older format. This will be done until 4.0
to ease the transition process.
Looking at a small portion of the patch should give a good impression
for the rest of the changes. I tried to make the changes as small as
possible so it's easy to tell the correctness from the diff. Though I
found Blender developers have been very inventive over the last decade
when finding different ways to loop over the corners in a face.
For performance, nearly every piece of code that deals with `Mesh` is
slightly impacted. Any algorithm that is memory bottle-necked should
see an improvement. For example, here is a comparison of interpolating
a vertex float attribute to face corners (Ryzen 3700x):
**Before** (Average: 3.7 ms, Min: 3.4 ms)
```
threading::parallel_for(loops.index_range(), 4096, [&](IndexRange range) {
for (const int64_t i : range) {
dst[i] = src[loops[i].v];
}
});
```
**After** (Average: 2.9 ms, Min: 2.6 ms)
```
array_utils::gather(src, corner_verts, dst);
```
That's an improvement of 28% to the average timings, and it's also a
simplification, since an index-based routine can be used instead.
For more examples using the new arrays, see the design task.
Pull Request: https://projects.blender.org/blender/blender/pulls/104424
The name #ensure_valid_reflection seems to indicate that the resulted
reflection must be valid, whereas in the reality it only ensure validity
for specular reflections. The new name matches the behavior better.
Actually both potential roots lie in the interval [0, 1], so the
function ended up checking both roots all the time.
The new implementation explains why only one of the roots is valid; it
saves two square roots and a bunch of other computations.
Since UVs are now stored as 2D vectors in meshes, they can be copied
directly to the vertex buffers. Somewhat surprisingly, multithreading
the copying into the vertex buffer provides a good speedup-- on a CPU
with many cores at least.
Here is a test uploading two UV maps created in geometry
nodes with a 1 million quad mesh, with a Ryzen 7950x:
| | Before | After | Speedup |
| ------- | ------- | ------ | ------- |
| Average | 24.3 ms | 7.5 ms | 3.2x |
| Min | 17.6 ms | 7.0 ms | 2.5x |
I added the copying utilities to the array utils header, since the
need for them has come up in a few different places already, and the
existing function with a selection argument didn't make sense here.
Pull Request: https://projects.blender.org/blender/blender/pulls/105793
Implement GBuffer prepass and deferred lighting (lights only).
This decouple lighting from the material shaders making them lighter,
less expensive and faster to compile.
Trying to keep a nice data flow so we could potentially use the
subpass programable blending feature on tiled GPU arch.
Not everything is covered yet and #105880 is making the GBuffer layout
a bit awkward and not easily extendable.
Pull Request: https://projects.blender.org/blender/blender/pulls/105868
Other areas like blenkernel and Cycles clamp the material indices to be
positive so this should be consistent with them. There is still discussion
if material indices should be made impossible, but this at least avoids
crashing for the 3.5 release.
There was also an inconsistency in how sculpt mode handles material index
higher than the number of slots.
Ref #105577
When an object has no UV layers and an anonymous UV layer is created,
the anonymous layer gets set as the default (render) layer. This is
very confusing because it then uses a hidden anonmous layer. This patch
suppresses the usage of anonymous layers for rendering.
Pull Request: https://projects.blender.org/blender/blender/pulls/105192
This is an issue revealed by the recent optimization in 4d3bfb3f41 to have
CPU and GPU subdivision topology both cached.
BKE_subsurf_modifier_subdiv_descriptor_ensure is what (re)creates the
topology refiner when needed. Invalidating the topology refiner on changes
must be done before it, otherwise we end up with an incomplete Subdiv that
either does not draw or draws incorrectly.
Pull Request: https://projects.blender.org/blender/blender/pulls/105844
This was likely caused by a bad merge when doing the uniform name
patching for Metal.
This also fix the same issue for active UDIM tile overlay which wasn't
reported.
