The hardcoded value doesn't work well with real scale human heads for
example (was already adjusted once in a76b5d3a07).
The result for too high values is a complete "freeze" of the whole curve
(since the solution from e7606139ba has the problem that it keeps
running into max iterations of the collision solver).
As long as no better solver is implemented, it is better to have an
adjustable value (to work on differently sizes objects) to not run into
the above issue (same as the old particle hair system had) and show it
in sculptmode next to the button which enables collision.
This is done per `Curves` (same as the flag
`CV_SCULPT_COLLISION_ENABLED`), similar to symmetry settings
[alternatively, it could be part of `BrushCurvesSculptSettings` but I
think it makes more sense in Curves] and then passed on to the
`CurvesConstraintSolver`.
Includes versioning code (to set the default for old files).
Pull Request: https://projects.blender.org/blender/blender/pulls/132997
Cycles has a sample offset feature allowing users to render X samples
in a single frame on one device, then the remaining Y samples later or
on a different device and combine them back together at the end.
However in most situations the result from using this method was
different, and usually lower quality than rendering all the samples in
one go.
This was because Cycles tunes it's random number sequence for the
number of samples being rendered. And the random number sequence was
being tuned for the wrong number of samples in the case that a user
was using the sample offset.
This commit fixes this issue by adding a "sample subset" feature.
The user specifies the total sample count being rendered across all
devices in the existing `Max Samples` parameter, then specifies per
device which subset of samples will be rendered (E.g. Render samples
0-1024 out of a 0-2048 range).
This commit also contains some additional clean up work
inside Cycles related to the area being changed.
Co-authored-by: Brecht Van Lommel <brecht@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/132961
* BLENDER_SYSTEM_SCRIPTS support for multiple script paths, separated by
; on Windows and : on other platforms.
* New BLENDER_CUSTOM_SPLASH to replace the splash screen image.
* New BLENDER_CUSTOM_SPLASH_BANNER to overlay an image on the splash.
Contributed by Sony Interactive Entertainment: https://github.com/PlayStation-OpenSource
`BKE_main_ensure_invariants` was added in 1fae5fd8f6. The older
`ED_node_tree_propagate_change` was already implemented as a thin wrapper around
`BKE_main_ensure_invariants`. This patch removes the wrapper and calls the more
general function directly.
A new overload of `BKE_main_ensure_invariants` is added for the common case when
only a single data-block has been modified.
Pull Request: https://projects.blender.org/blender/blender/pulls/133048
This makes specifying a legacy type for new node types optional (e.g.
`GEO_NODE_MESH_TO_CURVE`). Instead, only the `idname` is used as a stable
identifier for node types. So there is less redundancy for now.
This change helps with the decentralized definition of nodes and reduces the
number minimum number of files that need to be changed for a new node from 5 to
4. It especially helps when multiple nodes are worked on at the same time,
because the legacy type definition was very prone to have merge conflicts.
For compatibility reasons and because it's still used by existing code, the
`legacy_type` is not removed. All existing nodes keep their current
`legacy_type`. New nodes will receive an auto-incremented legacy type. It's
still necessary to give nodes unique legacy types, because some code checks if
two nodes have the same type by comparing their `legacy_type`. These types only
have to be unique at run-time though. Some randomness is used to avoid depending
on stable generated legacy types accidentally.
Pull Request: https://projects.blender.org/blender/blender/pulls/133044
This patch normalizes the Bloom output to be more energy conserving and
in a reasonable range. This is essentially constructed such that the
impulse response to a constant input maintains the same input.
The reason why Bloom has a very high range is because it accumulates a
downsampling chain without any sort of attenuation, so the final result
can be quite large. EEVEE fixed that by making the Strength range in the
[0, 0.1] range, so users who are used to that range think the default
value of a unit Strength in the glare node is large and hard to work
with. Hence the need for this patch.
The normalization factor is simply the length of the chain, since for a
constant input, all chain images will have the same constant input.
We need to version this change in a similar manner to how the glare node
was versioned in 004e3d39fa, where the scene render size is assumed. We
also assume the inputs are not connected, because they were turned into
inputs just last week, so we needn't worry about that case.
This is a partial implementation of #124176 to address #131325.
Pull Request: https://projects.blender.org/blender/blender/pulls/133037
The passed `StringRef` can be empty, so we shouldn't pass it to
`BLI_strdupn` in this case.
If an empty string is passed to either `set` function
makes sure the previous `char *` is freed and set to `nullptr`.
Pull Request: https://projects.blender.org/blender/blender/pulls/133042
ID names of images that included slashes would attempt to write
save the image in a sub-directory based on those slashes.
Also add notes to clarify the intended use of "safe" path functions.
Capitalize the default filename used for .blend files and other savable
and exportable file formats (like images, 3D formats, etc.) from
"untitled" to "Untitled".
Pull Request: https://projects.blender.org/blender/blender/pulls/132424
Previously, the owner-id on localized node trees, like the one created in
`GPU_material_from_nodetree` would have `bNodeTree::owner_id` set, even though
they were independent. The leads to asserts when using `BKE_id_owner_get` on the
localized node tree.
The `node_tree_localize` already took a `ID *new_owner_id` parameter. However,
if it was `nullptr` it was ignored instead actually clearing the `owner_id`.
This patch changes the parameter to `std::optional<ID *> new_owner_id`. Now,
`std::nullopt` means that the value is ignored and when `nullptr` is passed in,
the `owner_id` will be cleared on the localized tree.
Since `node_tree_localize` indirectly uses other functions, the same function
signature change is done in `BKE_libblock_copy_in_lib` and `BKE_id_copy_in_lib`.
The callers have been updated to pass in `nullopt` instead of `nullptr`.
Pull Request: https://projects.blender.org/blender/blender/pulls/133002
This patch adds a new `BKE_main_ensure_invariants` function. For now it only
ensures node-tree related invariants, but more may be added over time.
The already existing `ED_node_tree_propagate_change` now internally calls
`BKE_main_ensure_invariants`. We can probably remove this indirection at some
point and call the new function directly, but for now it is kept to keep this
patch small.
This is based on a recent discussion in the Core module meeting:
https://devtalk.blender.org/t/2024-12-12-core-meeting/38074
```cpp
/**
* Makes sure that invariants in original DNA data are maintained after changes.
*
* This function has to be idempotent, i.e. after calling it once, additional calls should not
* modify DNA data further. If it would, it would imply that this function does more than
* maintaining invariants.
*
* This has to be called after any kind of change to original DNA data that may be involved in some
* of the maintained invariants. It's possible to do multiple changes in a row and then fixing all
* invariants with a single call in the end. Obviously, the invariants are not maintained in the
* meantime then and functions relying on them might not work.
*
* If nothing is changed, this function does nothing and it should not be slower than checking a
* flag on every data-block in the given bmain.
*
* Sometimes, it is known that only a single or very few data-blocks have been changed (e.g. when a
* node has been inserted in a node tree). Passing in #modified_ids can speed up the function
* because it may avoid the need to iterate over all data-blocks to find modified data-blocks.
*
* Examples of maintained invariants:
* - Group nodes need to have the correct sockets based on the referenced node group.
* - The geometry nodes modifier needs to have the correct inputs based on the referenced group.
*/
void BKE_main_ensure_invariants(Main &bmain,
std::optional<blender::Span<ID *>> modified_ids = std::nullopt);
```
This also adds `windowmanager` as a dependency of `blenkernel` to be able to
send notifiers.
Pull Request: https://projects.blender.org/blender/blender/pulls/132023
This patch adds two new inputs to the Glare node, Highlights Smoothness
and Max Highlights. Smoothness allows the user to control how smooth the
highlights are after thresholding and Max allows the user to suppress
very high brightness pixels.
Those are essentially similar to the Knee and Clamp options in old EEVEE
bloom, though they work differently.
The issue with the Knee parameter in old EEVEE bloom, aside from being
named after a body part, is that it actually isn't smooth or continuous
around zero if the threshold is sufficiently close to zero relative to
the Knee parameter. That's because zero lies in the smoothing kernel
region in those cases, and since zero pixels becoming highlights is very
bad, EEVEE just returned zero as a special case for zero brightness, but
values like 0.0001 will be full blown highlights.
The new nicely named Smoothness input uses adaptive smoothing such that
the smoothing kernel size will be reduced as the threshold nears zero,
such that smoothed highlights will be continuous and smooth around zero.
The Max Highlights input is similar to clamped, it it suppresses very
bright highlights such that their brightness doesn't exceed the
specified max.
This is a partial implementation of #124176 to address #131325.
Pull Request: https://projects.blender.org/blender/blender/pulls/132864
In order to copy vertex group weights when subdividing strokes the
groups (`bDeformGroup`) must be created in advance, so that the attribute
wrappers correctly write to `CD_MDEFORMVERT` layer instead of creating simple
`CD_PROP_FLOAT` layers.
In addition the subdivision function must take care to fully write the
destination arrays, since initial values must be considered uninitialized (this
is obfuscated for simple CustomData arrays but breaks with more complex
attributes that use a buffer). In order to ensure fully defined destination
buffers without additional copies, the `finish` call to attribute writers is
postponed until the unselected attribute values have also been copied from input
buffers and all the values are properly defined.
Pull Request: https://projects.blender.org/blender/blender/pulls/132854
Only enable by default dynamic rendering local read on Qualcomm devices. NVIDIA, AMD and Intel
performance is better when disabled (20%). On Qualcomm devices the improvement can be
substantial (16% on shader_balls.blend).
`--debug-gpu-vulkan-local-read` can be used to use dynamic rendering local read on any
supported platform.
Future: Check if bottleneck is during command building. If so we could fine-tune this after the
device command building landed (#T132682).
Pull Request: https://projects.blender.org/blender/blender/pulls/132981
Don't change the object's active material when adding a material slot. This
active material will be used by brushes with no pinned material, while the
added slot is meant for the pinned material.
The if-statement in `BKE_grease_pencil_object_material_ensure_from_brush()`
would change the active unpinned material, even though it was only meant to
handle the pinned material. This was not a new issue, it was just unlikely to
run into it.
Before brush assets were introduced this if-statement would not be
executed when activating any of the default brushes. Afterwards it would
be, because the material was newly linked (because the brush asset was
linked) and so there was no material slot created for it yet.
Pull Request: https://projects.blender.org/blender/blender/pulls/132865
Similar to other visibility properties, include "hide_viewport" in
collection properties tab. One issue is that, when collection is
disabled, automatically parent collection is selected or tab is gone
when parent collection does not exist. The check was added in
0a903e7ab1, it doesn't seem very useful so
removed that.
Pull Request: https://projects.blender.org/blender/blender/pulls/132107
Main goals of this refactor:
* Make it more obvious which update function should be used.
* Make it more obvious which parameters are required by using references instead
of pointers.
* Support passing in multiple modified trees instead of just a single one.
No functional changes are expected.
Pull Request: https://projects.blender.org/blender/blender/pulls/132862
The `bNode.type_legacy` is still used in many places to check if a node is a
specific type. However, going forward it's better to rely more on the idname
than on this legacy integer type. Some more information is available in #132858.
The added utility method can be used like so:
`node->is_type("GeometryNodeMenuSwitch")`. Previously one would have written
`node->type_legacy == GEO_NODE_MENU_SWITCH`. The `is_type` method internally
checks that the passed in string is a valid node identifier to make it more
likely that we catch typos early.
Pull Request: https://projects.blender.org/blender/blender/pulls/132863
The new description for `bNode.type_legacy`:
```
/**
* Legacy integer type for nodes. It does not uniquely identify a node type, only the `idname`
* does that. For example, all custom nodes use #NODE_CUSTOM but do have different idnames.
* This is mainly kept for compatibility reasons.
*
* Currently, this type is also used in many parts of Blender, but that should slowly be phased
* out by either relying on idnames, accessor methods like `node.is_reroute()`.
*
* A main benefit of this integer type over using idnames currently is that integer comparison is
* much cheaper than string comparison, especially if many idnames have the same prefix (e.g.
* "GeometryNode"). Eventually, we could introduce cheap-to-compare runtime identifier for node
* types. That could mean e.g. using `ustring` for idnames (where string comparison is just
* pointer comparison), or using a run-time generated integer that is automatically assigned when
* node types are registered.
*/
```
Pull Request: https://projects.blender.org/blender/blender/pulls/132858
This removes the second to last usage of `NOD_static_types.hh` which we intend
to remove. A nice benefit is that the idname is now finally more explicit when a
node is registered. Previously it was difficult to search for the definition of
a node in the code when one had only the idname, which is the main identifier
for nodes.
The main change is in `node_type_base`.
Pull Request: https://projects.blender.org/blender/blender/pulls/132815
- Prefer term "size" over "width" as this was used for the height.
- Simplify calculation for drawing the "+".
- Add note that the "+" is slightly off-center (ref #112653).
As part of an effort to remove this header, reducing the need for macro/
include magic and making node definitions more independent, move
the node UI name and description definitions to each node's file.
The UI name, description, and idname are also moved to std::string
instead of char arrays.
Similar to b43e2168e3.
Pull Request: https://projects.blender.org/blender/blender/pulls/132708
Make the type structs non-trivial, use new and delete for allocation and
freeing, and use std::string for most strings they contain. Also use
StringRef instead of char pointers in a few places. Mainly this improves
ergonomics when working with the strings.
Pull Request: https://projects.blender.org/blender/blender/pulls/132750
UnitSettings::scale_length was used to scale reported
values for operators (translate, shrink-fatten, voxel-size).
This isn't expected as the value isn't editable when the unit-system
is set to None.
Add BKE_unit_value_as_string_scaled utility function for clarity &
to ensure scaling is only applied when it should be.
Split the versioning of legacy Actions to slotted ones into two steps:
1. Versioning the Actions themselves, in the regular versioning code
(`do_versions_after_linking_400`). This has to happen in the 'after
linking' stage, and not in the 'before linking' stage, as there's
older 'after linking' code that will break when it gets fed slotted
actions. Any ID that is using a legacy Action will get tagged.
2. Versioning Action assignments, where the correct Action Slot has to
be chosen & assigned for each tagged ID. This has to happen in the
`do_versions_after_setup` stage, as choosing a slot requires that the
actions (both local & linked) have been converted already.
This also includes some necessary changes to the pre-2.50 Action versioning
code.
Note that this change does not handle library overrides. That's dealt
with in !131426.
Pull Request: https://projects.blender.org/blender/blender/pulls/131627
The code for converting pre-Animato actions was not getting run properly
because `chanbase` (where animation data used to be stored) was
erroneously getting cleared before the relevant versioning code was run.
The root cause was that the code checking whether an action was already
valid as a layered action or not was NOT confirming that `chanbase` was
empty as part of that check (as it is a DNA-deprecated field), which in
turn triggered code that defensively clears `chanbase` (among other
things) when an action is identified as layered.
Note that the conversion of IPO curves and other pre-Animato data
happens quite late in the versioning, even _after_ the "versioning after
linking" stage. This is not introduced in this commit, this is just to
illuminate pre-existing design that might not be entirely obvious.
Pull Request: https://projects.blender.org/blender/blender/pulls/131975
