Give the `IDWALK_CB_…` enum an explicit name:
`LibraryForeachIDCallbackFlag`. This way the flags are type-safe, and
it's known where values come from. This is much preferred (at least by
me) to just having `int flags`.
Uses of `0` have been replaced with `IDWALK_CB_NOP` as that has the same
value and is of the right type.
One invalid use of `IDWALK_NOP` was detected by this change, and is
replaced by `IDWALK_CB_NOP`.
This change might be incomplete; I gave the enum a name, fixed the
compiler errors, and then also updated assignments like `int cb_flag =
cb_data->cb_flag`. I might have missed some assignments to `int` though.
No functional changes.
Pull Request: https://projects.blender.org/blender/blender/pulls/131865
Give the `IDWALK_…` enum an explicit name: `LibraryForeachIDFlag`. This way
the flags are type-safe, and it's known where values come from. This is
much preferred (at least by me) to just having `int flags`.
Uses of `0` have been replaced with `IDWALK_NOP` as that has the same value
and is of the right type.
One invalid use of `IDWALK_CB_NOP` was detected by this change, and is
replaced by `IDWALK_NOP`.
This change might be incomplete; I gave the enum a name, and then fixed
the compiler errors.
No functional changes.
Pull Request: https://projects.blender.org/blender/blender/pulls/131865
Two commits that basically do the same thing for two `enum`s: give
them a name.
- the `IDWALK_…` enum → `LibraryForeachIDFlag`.
- the `IDWALK_CB_…` enum → `LibraryForeachIDCallbackFlag`.
This way the flags are type-safe, and it's known where values come
from. This is much preferred (at least by me) to just having `int
flags`.
Uses of `0` have been replaced with `IDWALK_NOP` and `IDWALK_CB_NOP`,
as those have the same value and are of the right type.
One invalid use of `IDWALK_NOP` was detected by this change, and is
replaced by `IDWALK_CB_NOP`. And another one in the opposite
direction.
This change might be incomplete; I gave the enum a name, fixed the
compiler errors, and then also updated assignments like `int cb_flag =
cb_data->cb_flag`. I might have missed some assignments to `int`
though.
No functional changes.
----------
I intend to land this PR as its two separate commits. I just put them in the same PR so the buildbot can handle them in one go, and we don't have a stack of highly relatled PRs.
In the future this could also apply to the `IDWALK_RET_…` enum. This one I left out, though, because a proper cleanup there would also have to include their ambiguity on whether they are bitflags (like the enums in this PR) or not. Their values and the code in `BKE_lib_query_foreachid_process()` implies they are bitflags, but in practice they are never or'ed together and just used as discrete values.
Pull Request: https://projects.blender.org/blender/blender/pulls/131803
Use snake style naming for all the kernel nodes functions.
Omit kernel prefix in the names since of the using namespace.
Use full forms of the terms
('iter' -> 'iterator', 'ntree' -> 'node_tree', 'rem' -> 'remove', ...).
Pull Request: https://projects.blender.org/blender/blender/pulls/126416
Previously, values for `ID.flag` and `ID.tag` used the prefixes `LIB_` and
`LIB_TAG` respectively. This was somewhat confusing because it's not really
related to libraries in general. This patch changes the prefix to `ID_FLAG_` and
`ID_TAG_`. This makes it more obvious what they correspond to, simplifying code.
Pull Request: https://projects.blender.org/blender/blender/pulls/125811
Pass a non-`nullptr` `bmain` to `BKE_library_foreach_ID_link()` wherever
that `bmain` is known at the call site. This will be used in a followup
commit.
This should not introduce any functional changes.
Pull Request: https://projects.blender.org/blender/blender/pulls/123187
Move all header file into namespace.
Unnecessary namespaces was removed from implementations file.
Part of forward declarations in header was moved in the top part
of file just to do not have a lot of separate namespaces.
Pull Request: https://projects.blender.org/blender/blender/pulls/121637
In previous code, the owner ID info would not be available when
processing an embedded ID in two cases, and was incorrectly set to the
processed (embedded) ID instead:
1. When directly calling `BKE_library_foreach_ID_link` on an embedded ID.
2. When using recursive processing (`IDWALK_RECURSE`).
This commit mostly fixes both cases, by using `BKE_id_owner_get` to find
the owner ID when it is unknown.
There are some caveats here though: in a few specific cases (mainly ID
copying, and depsgraph ID copying), `BKE_library_foreach_ID_link` can be
called on embedded IDs which owner ID is not yet valid. In such case, a
new flag can be used to keep using the previous behavior
(`IDWALK_IGNORE_MISSING_OWNER_ID`).
Fixing the issue with copy code being unaware of the owner ID when
copying an embedded one should also be fixed, but this will be addressed
separately.
Note that as 'side efect', this commit also fixes a matching issue in
the `lib_remap` code, where the `IDRemap.id-owner` pointer would also
wrongly be set to the remapped embedded ID instead of its actual owner.
This change is not expected to have any effect in current codebase.
- Prefix comments before members is used practically everywhere,
remove C99 syntax from inside comments.
- Replace double quotes with backticks for code styling.
The depsgraph CoW mechanism is a bit of a misnomer. It creates an
evaluated copy for data-blocks regardless of whether the copy will
actually be written to. The point is to have physical separation between
original and evaluated data. This is in contrast to the commonly used
performance improvement of keeping a user count and copying data
implicitly when it needs to be changed. In Blender code we call this
"implicit sharing" instead. Importantly, the dependency graph has no
idea about the _actual_ CoW behavior in Blender.
Renaming this functionality in the despgraph removes some of the
confusion that comes up when talking about this, and will hopefully
make the depsgraph less confusing to understand initially too. Wording
like "the evaluated copy" (as opposed to the original data-block) has
also become common anyway.
Pull Request: https://projects.blender.org/blender/blender/pulls/118338
Existing code would allow tagging on request IDs which had a 'never
null' usage potentially cleared by the remapping operation (e.g. if an
Object obdata would have been set to `nullptr`).
While this worked for the current extremely restricted usecase (ID
deletion), this was not the best design, as it forced the ID remapping
user code to be very careful about its own usages of the `LIB_TAG_DOIT`
tag.
This commit replaces internal tagging by adding such IDs to a Set in
`IDRemapper` class, which user code can then use to find which IDs
(would have) had a 'never null' ID pointer cleared.
There are two additional changes induced by this commit:
* `BKE_libblock_unlink` `do_flag_never_null` parameter is removed.
As it is not used in current codebase, simpler to remove than update
the code to support it.
* `ID_REMAP_FLAG_NEVER_NULL_USAGE` option is renamed to
`ID_REMAP_STORE_NEVER_NULL_USAGE`.
In addition, its behavior is slightly modified:
* Before, the owner ID would systematically be tagged if it had such
'never null' ID usages, regardless of whether said ID usages (would)
have actually been remapped to `nullptr`.
* Now, the owner ID is only added to the `never_null_users` set if its
'never null' usages (would) have been cleared.
The ID remapper code was already largely defined in a CPP struct
(IDRemapper). Make this an actual class, and remove the C API wrapper
around.
This makes the code cleaner, easier to follow, and easier to extend or
modify in the future.
Pull Request: https://projects.blender.org/blender/blender/pulls/118146
Usually Library pointers should not be affected by remapping, but this
can be needed in some cases.
WARNING: Use with caution, this is potentially a dangerous operation for
Main data integrity/validity.
- Pass Span by value. It is a small struct, and passed by reference
it acts as a pointer to a pointer.
- Remove unnecessary `= {}`. Vector has a default constructor.
- Use initializer list Span constructor to avoid temporary array.
Pull Request: https://projects.blender.org/blender/blender/pulls/115635
Listing the "Blender Foundation" as copyright holder implied the Blender
Foundation holds copyright to files which may include work from many
developers.
While keeping copyright on headers makes sense for isolated libraries,
Blender's own code may be refactored or moved between files in a way
that makes the per file copyright holders less meaningful.
Copyright references to the "Blender Foundation" have been replaced with
"Blender Authors", with the exception of `./extern/` since these this
contains libraries which are more isolated, any changed to license
headers there can be handled on a case-by-case basis.
Some directories in `./intern/` have also been excluded:
- `./intern/cycles/` it's own `AUTHORS` file is planned.
- `./intern/opensubdiv/`.
An "AUTHORS" file has been added, using the chromium projects authors
file as a template.
Design task: #110784
Ref !110783.
Also see #103343.
Couldn't move two files yet:
* `softbody.c`: The corresponding regression test fails. It seems like the
conversion to C++ changes floating point accuracy, but it's not clear where that happens exactly.
* `writeffmpeg.c`: Is a bit more complex to convert because of the static array in `av_err2str`.
Pull Request: https://projects.blender.org/blender/blender/pulls/110182
