Approximately 138 changes in the spelling of compound words
and proper names like "Light Probe", "Shrink/Fatten", "Face Map".
In many cases, hyphens were used where they aren't correct, like
"re-fit". Other common changes include:
- "Datablock" -> "data-block"
- "Floating point" -> "floating-point"
- "Ngons" -> "n-gons"
These changes help give the language used in the interface
a consistent, more professional feel.
Differential Revision: https://developer.blender.org/D9923
This simple change sets the call_panel operator's "keep_open" property
to True for the viewport snapping panel called with `ctrl-shift-tab`.
There are quite a few settings in this panel, it often makes sense to
change more than one of them at a time, especially because multiple
snap elements can be active at the same time.
Paste copied strips after playhead, because this is more intuitive.
Previous functionality is still available by enabling "Keep Offset"
property, or under shortcut Ctrl+Shift+V.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D9734
This adds the missing options for the effects as it is done in modifiers.
Reviewed By: HooglyBoogly
Maniphest Tasks: T83696
Differential Revision: https://developer.blender.org/D9838
As a followup for rB2b3d85d7d6771, this commit adds the remove and
copy operators for grease pencil modifiers, effects, and constraints
where they apply.
Updating Industry Compatible keymap for Property filtering and new Modifier behavior.
Differential Revision: https://developer.blender.org/D9765
Reviewed by Julian Eisel
Improvements to the layout of the Keymaps section of Preferences by removing unneeded Decorator columns.
Differential Revision: https://developer.blender.org/D9726
Reviewed by Hans Goudey
This commit adds functions to set and get the object's active
modifier, which is stored as a flag in the ModifierData struct,
similar to constraints. This will be used to set the context in
the node editor. There are no visible changes in this commit.
Similar to how the node editor context works for materials, this commit
makes the node group displayed in the node editor depend on the active
object and its active modifier. To keep the node group from changing,
just pin the node group in the header.
* Shortcuts performed while there is an active modifier will affect
only that modifier (the exception is the A to expand the modifiers).
* Clicking anywhere on the empty space in a modifier's panel will make it active.
These changes require some refactoring of object modifier code. First
is splitting up the modifier property invoke callback, which now needs
to be able to get the active modifier separately from the hovered
modifier for the different operators.
Second is a change to removing modifiers, where there is now a separate
function to remove a modifier from an object's list, in order to handle
changing the active.
Finally, the panel handler needs a small tweak so that this "click in panel"
event can be handled afterwards.
Differential Revision: https://developer.blender.org/D8660
This patch is the result of the GSoC 2020 "Editing Grease Pencil Strokes
Using Curves" project. It adds a submode to greasepencil edit mode that
allows for the transformation of greasepencil strokes using bezier
curves. More information about the project can be found
here: https://wiki.blender.org/wiki/User:Filedescriptor/GSoC_2020.
Commit rBf5080c82dd915db6c7b9dd68a52aaaccf2600137
accidentally remove the Shift modifier key from
the `AUTOCONSTRAINPLANE` shortcut.
Differential Revision: https://developer.blender.org/D9480
This introduces a new operator to edit the detail size of constant
detail mode in dyntopo. The way this operator works and the
functionality it provides is similar to the "Voxel size edit" operator
for the voxel remesher.
It also includes a sample mode. When pressing Ctrl, the detail size
will be sampled from the surface under the cursor, updating the
preview in real time. This allows quick resolution changes without
using the operator multiple times.
The operator is set to Shift + D, replacing the old way to change
the constant detail size of dyntopo. Shift + R will remain available to
be enabled when the voxel remesher works with dyntopo. Deciding
if both detail sizes can be unified needs a separate discussion as the
new dyntopo can work with detail sizes in parts of the mesh that can
easily crash the remesher.
The structure of these operators is similar, but the data they control,
ranges, drawing and setup functions are completely different, making it
hard to merge them into one.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9355
Global automasking options are usually turned on/off for quick
adjustments both in brushes and filters, so it is convenient to have them
in a pie menu.
This uses the Alt + A shortcut.
Reviewed By: dbystedt, HooglyBoogly
Differential Revision: https://developer.blender.org/D9282
This adds an operation mode to the Face Set Edit tool which deletes the
geometry of a Face Set by clicking on it.
The operator also checks for the mesh having a single Face Set to avoid
deleting the entire object by accident.
This is also disabled for Multires to avoid modifying the limit surface
without control (it is not an important limitation as base meshes for
multires are usually final, but maybe it can be supported in the future).
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8938
GPencil: Change Interpolate shortcut to Ctrl+E
Before the shortcut was Ctrl+Alt+E, but it's more logic remove the Alt.
This was missed in rBee49ce482a797a5937829de497abd69bcd1edb48
There was a weird bug in the API where a value of 0 gave a mask value of
1. I am not sure why this is but the current code works as desirable.
This was missed in rB6faa765af8954948de3cec75a2261a5aa139b4e5
There was a weird bug in the API where a value of 0 gave a mask value of
1. I am not sure why this is but the current code works as desirable.
This was missed in rB6faa765af8954948de3cec75a2261a5aa139b4e5
In practice, there are only a limited number of operations we need to
use repeat such as navigation, stepping operations that cycle states
and text input.
Now we don't need to disable repeat explicitly when a modal operator
uses checks for a key being held as was needed for 17cb2a6da0.
Repeat is now included in exported keymaps.
Use versioning so existing exported keymaps are loaded properly.
nothing
Caused by rB6faa765af895.
Since above commit, we have to use paint.mask_box_gesture instead now.
Maniphest Tasks: T81926
Differential Revision: https://developer.blender.org/D9300
Line gesture use always the right side of the line as active (the area
of the mesh that is going to be modified) by default.
This adds the ability to change the active side when the line gesture is
active by pressing the F key.
This allows more freedom to position the line after starting the
gestures, as it won't be required to cancel the operation or undo if the
line was used in the wrong direction.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D9301
This adds support for snapping for line gesture tool. It is implemented
in the modal keymap as Snap, which is a toggle (similar to how snapping
in the transform operator works).
Right now it snaps the angle of the line to 15 degree increments, which
is defined in code. This should be easy to expose in the UI in the future
if we need to.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D9115
This patch adds a modal key to move the selection box/lasso/line while
drawing it. It also sets "repeat": False on the animation playback key
to prevent accidental playback if the spacebar is released after the
mouse button.
Reviewed By: #user_interface, pablovazquez, Severin
Differential Revision: https://developer.blender.org/D9227
The `outliner.item_rename` operator needs to decide if it should rename the
active or the hovered item. Previously it checked if the event is a press
event, which is a hacky way of doing this and limit how the operator can be
used in the keymap.
Now use a operator option to let this be controlled on the keymap level.
Doesn't change any default behavior.
With all the work on DNA defaults for 2.91, it's nice to expose this
convenient operator. This was already hardcoded in the UI code to the
backspace key, adding it to the keymap instead will make the shortcut
automatically show in the button right click menu.
Differential Revision: https://developer.blender.org/D9219
This tool projects all vertices to the right of the plane defined by the
line gesture towards the plane. By doing this, this tool can create cuts
and plane surfaces in the mesh without modifying the geometry or using
boolean operations, so it is much faster than bisecting the mesh for
cases where the geometry was going to be remeshed afterwards.
Added as experimental as it does not have icon.
Reviewed By: sergey, Severin
Differential Revision: https://developer.blender.org/D9021
This adds support for line gesture to SculptGestureContext and
implements a Mask Line tool, which affects everything to the right of a plane
defined by the straightline gesture.
For this to work, a new WM_gesture_straightline_oneshot_modal is needed
which only runs exec when the gesture is over.
Added as experimental as it does not have icon.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D8722
This fixes and reverts commit c7287ffaec
Due to hardcodded keys, the modifier for auto contrain plane did not
work with custom keymaps and was in conflict with other keyitems.
Its usability is also confusing since it cannot be used without
`MOD_PRECISION`
But instead of removing it, it is better to make this modifier compatible
with custom keymaps and keep the conflict.
This object operator exits and frees the edit data of the
current object and enters the same mode in another one in a single step,
without going through object mode or keeping multiple edit object data
active. It is assigned to the D key.
This solves all conflicts that the right/click select keymap and the
emulate 3 button mouse produces for this operation and it is independent
of the state of Lock object modes.
Also, as the SculptSession is freed, when using Multires objects go
back to their preview resolution level, so it is possible to work on
high vertex count scenes without slowing down the viewport and other
performance problems.
Reviewed By: #user_interface, pablovazquez
Differential Revision: https://developer.blender.org/D7510
Was missing a dedicated entry for LMB select, this is to be consistent
with how it is done for meshes.
Maniphest Tasks: T80905
Differential Revision: https://developer.blender.org/D8935
`ctrl-F` to start the search is obviously necessary, but the clear
operator, `alt-F` requires some of explanation. First, it maps nicely
to the paradigm of "key to set, alt-key to clear," which makes it
unobtrusive. Second, it can be a quicker way to clear the search than
moving the mouse to the top. Finally, in the future, it could a reset
the panels to their expansion before the search started.
Differential Revision: https://developer.blender.org/D8857
This commit also changes the U shortcut to open the unwrap menu instead
of the Unwrap operator. The unwrap operator can now be accessed by
pressing U twice.
Note, these operators use the 3D Viewports selection and not the UV
Editor selection. In the future the operators should unwrap based on the
selection within that editor.
Fixes T80600
Differential Revision: https://developer.blender.org/D8834
This implements Box Trim as a boolean based trimming too gesture in sculpt
mode. This is the intended way to remove parts of the sculpt instead of
using box mask and mask slice. It also creates new face sets for the new
faces created after the boolean operation.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8766
This implements the sculpt gesture lasso and box operators for face
sets. They work the same way as the mask gesture operator and tools.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8716
