This bug exposes some ugliness in the implementation in poisson disk
distribution implementation with likely incorrect resizing of vectors and
some other assumptions. However, a simple quick fix is to return early
when the input mesh has no faces. This makes sense anyway because
there is no surface to scatter on.
This node updates the "rotation" attribute on points.
Multiple ways to specify the rotation are supported.
Differential Revision: https://developer.blender.org/D9883
Ref T83668.
T83989 observes that the Attribute Math node always adds its
operands regardless of its operator setting. This was caused
by an oversight committed in rB23233fcf056e42, which overlooked
adjusting the exec function to use the new storage location.
Differential Revision: https://developer.blender.org/D9909
This new node increases the radiance of an image by a scalar value.
Previously, the only way to adjust the the exposure of an image was with
math node or using the scene's color management.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D9677
This uses the "id" attribute to randomly pick instances from a collection
for each point.
There is one issue. When the collection is updated (e.g. when an object is
added to it), the nodes modifier is not automatically updated. It seems
like we don't have the infrastructure to support this dependency yet.
The same issue exists in the Boolean modifier and with collision collections.
This should be solved separately soonish.
When "Whole Collection" is disabled, one direct child of the input collection
is instanced at each point. A direct child can be an object or a collection.
Currently, all objects are picked approximately equally often. In the future,
we will provide more control over which point gets which instance.
Differential Revision: https://developer.blender.org/D9884
Ref T82372.
Ref: T82651
Normally people use "Combine XYZ" to input a vector, but it is more
interesting to have an explicit vector input.
So this is basically "Combine XYZ" without any input sockets, the values
are stored in the node itself.
Differential Revision: https://developer.blender.org/D9885
In glsl the clamp function has undefined behavior when min > max. For
the clamp node this resulted in differences between cycles and eevee.
This patch adds the expected implementation for minmax.
The old clamp function is still used in cases where we know for certain
that the input values are correct (math node clamp option). GPU uses
optimized code and silicon in these cases.
Since creating the attribute node, a helper function has been added to
automatically get the input attribute or a constant value, depending on
the "input type" values for the node. This commit replaces the specific
implementation of that behavior with the new helper function.
The versioning is necessary since the node now has a "storage" struct.
This patch adds two related nodes, a node for separating points
and mesh vertices based on a boolean attribute input, and a node
for creating boolean attributes with comparisons.
See the differential for an example file and video.
Point Separate (T83059)
The output in both geometries is just point data, contained in the mesh
and point cloud components, depending which components had data in the
input geometry. Any points with the mask attribute set to true will be
moved from the first geometry output to the second. This means that
for meshes, all edge and face data will be removed. Any point domain
attributes are moved to the correct output geometry as well.
Attribute Compare (T83057)
The attribute compare does the "Equal" and "Not Equal" operations by
comparing vectors and colors based on their distance from each other.
For other operations, the comparison is between the lengths of the
vector inputs. In general, the highest complexity data type is used
for the operation, and a new function to determine that is added.
Differential Revision: https://developer.blender.org/D9876
Currently, the random attribute node doesn't work well for most
workflows because for any change in the input data it outputs
completely different results.
This patch adds an implicit seed attribute input to the node, referred
to by "id". The attribute is hashed for each element using the CPPType
system's hash method, meaning the attribute can have any data type.
Supporting any data type is also important so any attribute can be
copied into the "id" attribute and used as a seed.
The "id" attribute is an example of a "reserved name" attribute,
meaning attributes with this name can be used implicitly by nodes like
the random attribute node. Although it makes it a bit more difficult
to dig deeper, using the name implicitly rather than exposing it as an
input should make the system more accessible and predictable.
Differential Revision: https://developer.blender.org/D9832
The size of the nodes is not enough to give enough context to users what
the sockets are about.
Minimum Distance -> Distance Min
Maximum Density -> Distance Min
Note this does not handle doversion. That means users will have to
manually.
This adds a boolean attribute and custom data type, to be used in the
point separate node. It also adds it as supported data types in the
random attribute and attribute fill nodes.
There are more clever ways of storing a boolean attribute that make
more sense in certain situations-- sets, bitfields, and others, this
commit keeps it simple, saving those changes for when there is a proper
use case for them. In any case, we will still probably always want the
idea of a boolean attribute.
Differential Revision: https://developer.blender.org/D9818
This patch does two things:
* Introduce a Seed to the random distribution method
* Bring in a new distribution method for the point scattering node
Patch Review: https://developer.blender.org/D9787
Note: This commit doesn't not handle doversion. Which means that users
need to manually update their files that were using the Point Distribute
node and reconnect inputs to the "Maximum Density" socket.
Original patch by Sebastian Parborg, with changes to not rely on the cy
libraries and overall cleanup.
Patch review by Jacques Lucke, besides help with the new "heap" system
that was required for this algorithm.
Based on Cem Yuksel. 2015. Sample Elimination for Generating Poisson Disk
Sample. Sets. Computer Graphics Forum 34, 2 (May 2015), 25-32
http://www.cemyuksel.com/research/sampleelimination/
Remove DNA headers, using forward declarations where possible.
Also removed duplicate header, header including it's self
and unnecessary inclusion of libc system headers from BKE header.
This commit adds a simple utility function for getting the data type of an
attribute or its "constant" socket counterparts. No functional changes.
Differential Revision: https://developer.blender.org/D9819
This changes the way how the mattes are stored in the compositor node. This used to
be a single string what was decoded/encoded when needed. The new data structure
stores all entries in `CryptomatteEntry` and is converted to the old `matte_id`
property on the fly.
This is done for some future changes in the workflow where a more structured
approach leads to less confusing and easier to read code.
The Point Instance node can instance entire collections now.
Before, only individual collections were supported.
Randomly selecting objects from the collection on a per point basis
is not support, yet.
Last part of D9739.
Ref T82372.
The implementation is pretty much the same as for Object sockets.
The socket color is the one that is used for collections in the outliner.
Part of D9739.
This node can be used to mix two attributes in various ways.
The blend modes are the same as in the MixRGB shader node.
Differential Revision: https://developer.blender.org/D9737
Ref T82374.
This commit adds a node that fills every element of an attribute
with the same value. Currently it supports float, vector, and color
attributes. An immediate use case is for "billboard" scattering.
Currently people are using the same input to a Random Attribute node's
min and max input to fill every element of a vector with the same value,
which is an unintuitive way to accomplish the same thing.
Differential Revision: https://developer.blender.org/D9790
This is a non-functional change. The functionality introduced in this commit
is not used in master yet. It is used by nodes that are being developed in
other branches though.
This just makes sure that the mesh coming out of the subdivision
surface node has correct normals. Ideally, we would lazily compute
derived data like normals in more cases, but that can be solved later.
Correctness is more important right now.
In order to solve this better, it would be nice if functions like
`BKE_mesh_ensure_normals` would take a `const Mesh *`.
The mesh could be considered to be logically const, because
normals are derived data that is only cached for the current
state of the mesh.
This patch adds support for AOVs in EEVEE. AOV Outputs can be defined in the
render pass tab and used in shader materials. Both Object and World based
shaders are supported. The AOV can be previewed in the viewport using the
renderpass selector in the shading popover.
AOV names that conflict with other AOVs are automatically corrected. AOV
conflicts with render passes get a warning icon. The reason behind this is that
changing render engines/passes can change the conflict, but you might not notice
it. Changing this automatically would also make the materials incorrect, so best
to leave this to the user.
**Implementation**
The patch adds a copies the AOV structures of Cycles into Blender. The goal is
that the Cycles will use Blenders AOV defintions. In the Blender kernel
(`layer.c`) the logic of these structures are implemented.
The GLSL shader of any GPUMaterial can hold multiple outputs (the main output
and the AOV outputs) based on the renderPassUBO the right output is selected.
This selection uses an hash that encodes the AOV structure. The full AOV needed
to be encoded when actually drawing the material pass as the AOV type changes
the behavior of the AOV. This isn't known yet when the GLSL is compiled.
**Future Developments**
* The AOV definitions in the render layer panel isn't shared with Cycles.
Cycles should be migrated to use the same viewlayer aovs. During a previous
attempt this failed as the AOV validation in cycles and in Blender have
implementation differences what made it crash when an aov name was invalid.
This could be fixed by extending the external render engine API.
* Add support to Cycles to render AOVs in the 3d viewport.
* Use a drop down list for selecting AOVs in the AOV Output node.
* Give user feedback when multiple AOV output nodes with the same AOV name
exists in the same shader.
* Fix viewing single channel images in the image editor [T83314]
* Reduce viewport render time by only render needed draw passes. [T83316]
Reviewed By: Brecht van Lommel, Clément Foucault
Differential Revision: https://developer.blender.org/D7010
During the development of the new nodes in the `geometry-nodes` branch
the color of the new nodes wasn't considered, so all of the nodes ended
up red, the color for "input" nodes. This patch introduces two new
colors, one for "Geometry" and one for "Attributes". There are only two
attribute nodes currently, but the next sprint will add two more,
attribute mix, and sample from texture. The attribute nodes are
conceptually different enough from the nodes that modify the geometry
that they deserve their own color.
Differential Revision: https://developer.blender.org/D9682
This commit adds functions to set and get the object's active
modifier, which is stored as a flag in the ModifierData struct,
similar to constraints. This will be used to set the context in
the node editor. There are no visible changes in this commit.
Similar to how the node editor context works for materials, this commit
makes the node group displayed in the node editor depend on the active
object and its active modifier. To keep the node group from changing,
just pin the node group in the header.
* Shortcuts performed while there is an active modifier will affect
only that modifier (the exception is the A to expand the modifiers).
* Clicking anywhere on the empty space in a modifier's panel will make it active.
These changes require some refactoring of object modifier code. First
is splitting up the modifier property invoke callback, which now needs
to be able to get the active modifier separately from the hovered
modifier for the different operators.
Second is a change to removing modifiers, where there is now a separate
function to remove a modifier from an object's list, in order to handle
changing the active.
Finally, the panel handler needs a small tweak so that this "click in panel"
event can be handled afterwards.
The handling of muted nodes is handled at the derived node tree
level now. This is also where expanding node groups is handled.
Muted nodes are relinked and removed from the derived tree
during construction. The geometry node evaluation code does
not have to know about muted nodes this way.
This is the initial merge from the geometry-nodes branch.
Nodes:
* Attribute Math
* Boolean
* Edge Split
* Float Compare
* Object Info
* Point Distribute
* Point Instance
* Random Attribute
* Random Float
* Subdivision Surface
* Transform
* Triangulate
It includes the initial evaluation of geometry node groups in the Geometry Nodes modifier.
Notes on the Generic attribute access API
The API adds an indirection for attribute access. That has the following benefits:
* Most code does not have to care about how an attribute is stored internally.
This is mainly necessary, because we have to deal with "legacy" attributes
such as vertex weights and attributes that are embedded into other structs
such as vertex positions.
* When reading from an attribute, we generally don't care what domain the
attribute is stored on. So we want to abstract away the interpolation that
that adapts attributes from one domain to another domain (this is not
actually implemented yet).
Other possible improvements for later iterations include:
* Actually implement interpolation between domains.
* Don't use inheritance for the different attribute types. A single class for read
access and one for write access might be enough, because we know all the ways
in which attributes are stored internally. We don't want more different internal
structures in the future. On the contrary, ideally we can consolidate the different
storage formats in the future to reduce the need for this indirection.
* Remove the need for heap allocations when creating attribute accessors.
It includes commits from:
* Dalai Felinto
* Hans Goudey
* Jacques Lucke
* Léo Depoix
Don't refresh the list of sockets, so that when the .blend file is restored the
links remain valid. Also display such nodes in red to indicate an error, same
as when the node type info is missing.
