This node hashes various types into an integer. Note that hashes
cannot generally used as unique identifiers because they are not
guaranteed to be unique. It can be used to generate somewhat
stable randomness though in cases where White Noise does not
offer enough flexibility.
It uses hash functions from BLI_noise.hh. These are also used in
the White Noise node.
Pull Request: https://projects.blender.org/blender/blender/pulls/110769
Previously, all errors, warnings and info messages were propagated from the node
that generates it to the top level node group. This is a good default, but may
not always be desirable. For example, someone may build a node group asset that
generates some warning that is irrelevant to the user to the asset. Now, the
asset author can selectively disable propagating warnings from that node.
Each node has a new `Warning Propagation` setting. It controls if warnings from
this node should be propagated to the parent group node. By default, everything
is propagated. One can also choose to propagate nothing, only errors or only
errors and warnings.
Note, this does not affect whether the warning is shown in the node itself, only
if the warning is propagated one level up!
Pull Request: https://projects.blender.org/blender/blender/pulls/126786
This implements the `Warning` node that allows node groups to communicate
expectations about input values to the user.
By default, the `Warning` node is only evaluated if the node group that contains
it is evaluated in any way. This is better than always evaluating it, because
that could trigger lots of unnecessary evaluation in parts of the potentially
large node tree which should be ignored. In this basic mode, the output of the
node should not be connected to anything and it must not be in a zone.
For more fine-grained control for when the `Warning` node should be evaluated,
one can use the boolean output which is just a pass-through of the `Show` input.
If this output is used, the `Warning` node will only be evaluated if its output
is used. A simple way to use it is to control a Switch node with it that e.g.
"disables" a specific output when the inputs are invalid. In this case, the
`Warning` node may also be in a zone.
The node allows the user to choose between 3 severity levels: Error, Warning and
Info. Those are the same levels that we use internally. Currently, the error and
warning mode are pretty much the same, but that may change in the future.
Pull Request: https://projects.blender.org/blender/blender/pulls/125544
Add new operator `anim.slot_new_for_object`, which creates a new action
slot for the active object. Since this slot is created on the action
used by the object, it requires that this action exists and is a
layered/slotted action (which by definition includes empty actions).
Pull Request: https://projects.blender.org/blender/blender/pulls/126934
Add Metallic BSDF Node to the shader editor.
This node can primarily be used to create more realistic looking
metallic materials than the existing Glossy BSDF node.
This commit does not add any new closures to Cycles, it simply exposes
existing closures that were previous hard to access on their own.
- Exposes the F82 fresnel type that is currently used by the
metallic component of the Principled BSDF. Results should match
between the Metallic BSDF and Principled BSDF when using the same
settings.
- Exposes the Physical Conductor fresnel type that was previously
limited to custom OSL scripts. The Conductor fresnel type accepts
IOR and Extinction coefficients to define the appearance of the
material based off real life measurements.
EEVEE only supports the F82 fresnel type with internal code to convert
the the physical conductor inputs in to a colour format for F82,
which can lead to noticeable rendering differences with
some configurations.
Pull Request: https://projects.blender.org/blender/blender/pulls/114958
For a brief moment when switching to a maximized screen full area, the
screen context is missing its `object` it seems, until the context is
properly set up again.
Prevent the 'Context' object has no attribute 'object' by just checking
if it is available
Pull Request: https://projects.blender.org/blender/blender/pulls/125905
Adds the ability to connect and disconnect strips in the VSE.
- Connected strips have an icon indicating their status, and attempting
to select one connected strip selects all other connected strips in
that chain.
- If the user attempts to connect a strip that is already connected to
other strips, that strip will disconnect itself from others before
connecting to new strips.
- Preview selection also works in bulk if multiple video strips are
connected together in the timeline.
- When adding new strips from the Add menu or the File Browser, strips
from the same file are connected by default. There's an option to
turn this off in Editing > Video Sequencer user preferences.
- It is possible to individually tweak strips/handles and ignore
connections with Alt+Click.
- This shortcut overrides the old keymap item for "Linked Handle"
selection. The property still exists if people want to use that
shortcut for its old purpose.
- To make sure that connections remain valid even after duplication,
I've added a condition to `seq_new_fix_links_recursive` that also
updates connections using the `seq->tmp` var. (A note -- I've updated
the comment for this field in `DNA_sequence_types.h` because the var
is only used for duplication now. It was once present in
`select_more_less_seq__internal` to be used for linked selection but
is gone now).
- There are also functions to cut one-way links and make sure that
all strips are bidirectionally connected after duplicating.
Pull Request: https://projects.blender.org/blender/blender/pulls/124333
Support segment mode in Grease Pencil v3 selection operators.
This is a continuation of #109221.
Segment selection works in multiple stages:
1. When enabled, the 2D evaluated lines for all visible curves are
entered into a BVH tree. This tree is used to find intersections later
on. All the visible drawings are in the tree, an `OffsetIndices` array
is used to record ranges of BVH elements for each drawing.
2. Primary selection functions get alternative versions that produce an
`IndexMask` instead of writing directly to selection attributes. This
makes it possible to detect select actions on points that are already
selected. Using a delta of selection attributes for this is not enough
to detect such user actions (and inefficient).
3. In segment mode the `IndexMask` is extended to fully cover segment
points (or exclude them when deselecting respectively). This first
performs and intersection test using the BVH tree, then finds all point
range with selected elements.
4. Finally the extended index mask is applied to selection attributes as
usual.
Pull Request: https://projects.blender.org/blender/blender/pulls/126027
Implementation of the soft mode of the eraser tool for GPv3.
In this mode, the eraser decreases the opacity of the points it hits.
If the opacity of a point falls below a threshold, then the point
is removed from the curves.
Pull Request: https://projects.blender.org/blender/blender/pulls/110310
This adds the Eyedropper tool to GPv3.
A few changes have been made:
- Added `Brush` mode.
- Set active color in palette.
- Show the palette in the UI.
- Add UI for setting material mode.
- Drag for color accumulation.
Pull Request: https://projects.blender.org/blender/blender/pulls/126211
Show the autokeying indicator (record button) on the Timeline header in
red when enabled. With a white outline on dark theme, or with a black
outline on light theme. The red color is user changeable.
Pull Request: https://projects.blender.org/blender/blender/pulls/126344
This operator sets the new default group node width (from e842966c5e) based on
the parent group node. This makes it easier to initialize the value. Without
this, one had to create and delete the group node potentially many times to find
a good default width.
Pull Request: https://projects.blender.org/blender/blender/pulls/126239
This adds the ability to customize the default width of a group node that's
created for a node group. This feature works towards the goal of unifying the
features available to built-in nodes and node groups. We often customize the
width of built-in nodes from them to looks slightly better (e.g. to avoid
cut-off labels).
Pull Request: https://projects.blender.org/blender/blender/pulls/126054
This patch introduces a new experimental option for the new CPU
compositor under development. This is to make development easier such
that it happens directly in main, but the compositor is not expected to
work and will probably crash.
Pull Request: https://projects.blender.org/blender/blender/pulls/125960
This issue occurred only on Mac which has to circumvent
geometry shaders lacking support for them.
This patch reverts the vertex shader for Mac devices to
how it was before f9ea64b0ba. (and uses the frag shader from before that commit)
In order to communicate that to the user I added a label
in the GUI when the platform is Mac.
Co-authored-by: Clément Foucault <foucault.clem@gmail.com>
Pull Request: https://projects.blender.org/blender/blender/pulls/125967
Add a toggle for Fast GI Approximation in the header of the panel,
following Cycles layout.
Move the `Max Roughness` setting inside the panel, and rename to
Threshold.
Since Fast GI Approximation only has any effect when Threshold/
Max Roughness is below the max (1.0), gray out the rest of the
panel when at that value.
Co-authored-by: Clément FOUCAULT <foucault.clem@gmail.com>
Pull Request: https://projects.blender.org/blender/blender/pulls/125452
Modifiers in the VSE have mask properties first, then modifier-specific
settings. This breaks consistency with other modifiers for objects
and Grease Pencil.
Move Mask properties to the bottom, after a separator, and group them
in a column for better alignment.
Fixes#120360
Pull Request: https://projects.blender.org/blender/blender/pulls/125710
Update `draw_material_settings` to show EEVEE Next properties.
This only changes the internal function, instead of the Panel classes
themselves, to avoid breaking the Python API.
Pull Request: https://projects.blender.org/blender/blender/pulls/125616
Add a utility function to add horizontal padding to the left and right
of items in UI lists and tree views to make them more consistent with
other buttons like menu entries.
Pull Request: https://projects.blender.org/blender/blender/pulls/125498
This type of projection is often used e.g. in exhibitions that leverage big
curved screens.
Effectively, the frame is mapped onto a cylinder, with the x axis becoming the
longitude and y axis becoming the height.
Users can configure the min/max longitude, the min/max height and the radius of
the cylinder.
Co-authored-by: Lukas Stockner <lukas.stockner@freenet.de>
Pull Request: https://projects.blender.org/blender/blender/pulls/123046
This removes the terminal periods automatically added to the end of
tooltip items. The current desire is to only end in period if there
are multiple sentences - so if there is one in the middle of the
description. This also converts our uses of lists to use space and
bullet, rather than just bullet or asterisks.
Pull Request: https://projects.blender.org/blender/blender/pulls/125460
Missed after 'Set Snap Base' commit.
Just like in 3D View, UV editing can also benefit from selecting
multiple snap target elements.
The C++ code was already done, it was only necessary to edit the
interface.
Pull Request: https://projects.blender.org/blender/blender/pulls/124986
Hide the Action Slot selector in the Action editor behind the experimental
flag. Not only shouldn't it be shown, but also it uses an API that's only
available in experimental builds.
This gives users the ability to control the size of tooltip text
separately from other text styles. This is an accessibility issue
in that users with low vision can choose to make these larger than
the working text.
Pull Request: https://projects.blender.org/blender/blender/pulls/125147
Convert an image to grease pencil strokes by tracing features.
Uses the Potrace library to generate curve on averaged b/w values of the image.
Ported from the GPv2 feature of the same name.
Pull Request: https://projects.blender.org/blender/blender/pulls/125328
Add an Action Slot selector to the Action editor's header, next to the
Action selector. The selector shows all slots in the action that are
suitable for animating objects (as the Action editor itself is limited
to showing the Action of the active object).
This also considerably simplifies the 'Animation Debug' panel, as some
debugging code has been removed, as well as the display of any animation
layers. The latter can be reintroduced (if necessary) when multi-layer
animation support is added. Most importantly, it removes the
WindowManager property that was used as a hack to assign layered Actions
to objects.
API change: the RNA property `AnimData.slot` is now a pointer property
that reflects the actual slot (it used to be an enum property).
Some small changes to the UI code were necessary to make the selector
show the slot's display name (and not their internal name).
Pull Request: https://projects.blender.org/blender/blender/pulls/125416
Replace the "play" emoji ▶ with a hyphen as separator in attribute
lists (Attributes and Color Attributes panel).
The hyphen uses less space while at the same time adding negative
space around domain/datatype making it easier to scan through the list.
See pull request for images.
Pull Request: https://projects.blender.org/blender/blender/pulls/125436
