- Move gpuPush/Pop from GPU_draw.h into GPU_state.h
as this is for pushing/popping state.
- Add 'GPU_STANDALONE' define, to bypass use of user-preferences
for theme colors and pixelsize, as well as pbvh init/free functions.
Needed to get GHOST tests working again.
The current code allocates and transfers a lot of memory to the GPU,
but only a small portion of this memory is actually used.
In addition, the code calls many costly gl operations during the
caching process.
This commit significantly reduce the amount of memory by allocating
and transferring a flat array without pads to the GPU.
It also calls as little as possible the gl operations during the cache.
This code also simulate a billinear filter `GL_LINEAR` using a 1D texture.
**Average drawing time:**
|before:|0.00003184 sec
|now:|0.00001943 sec
|fac:|1.6385156675048407
**5 worst times:**
|before:|[0.001075, 0.001433, 0.002143, 0.002915, 0.003242]
|now:|[0.00094, 0.000993, 0.001502, 0.002284, 0.002328]
Differential Revision: https://developer.blender.org/D6886
Two main reasons for the lag:
- Allocation of memory with transfer to GPU.
- BLF_cache_clear();
The (partial) solution is to avoid memory allocating in some setups
through the `GPU_texture_clear`.
Differential Revision: https://developer.blender.org/D6837
Two main reasons for the lag:
- Allocation of memory with transfer to GPU.
- BLF_cache_clear();
The memory allocation seems to be unnecessary, so I removed it.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6837
This is a more correct fix to the issue Brecht was fixing in D6600.
While the fix in that patch worked fine for linking it broke ASAN
runtime under some circumstances.
For example, `make full debug developer` would compile, but trying
to start blender will cause assert failure in ASAN (related on check
that ASAN is not running already).
Top-level idea: leave it to CMake to keep track of dependency graph.
The root of the issue comes to the fact that target like "blender" is
configured to use a lot of static libraries coming from Blender sources
and to use external static libraries. There is nothing which ensures
order between blender's and external libraries. Only order of blender
libraries is guaranteed.
It was possible that due to a cycle or other circumstances some of
blender libraries would have been passed to linker after libraries
it uses, causing linker errors.
For example, this order will likely fail:
libbf_blenfont.a libfreetype6.a libbf_blenfont.a
This change makes it so blender libraries are explicitly provided
their dependencies to an external libraries, which allows CMake to
ensure they are always linked against them.
General rule here: if bf_foo depends on an external library it is
to be provided to LIBS for bf_foo.
For example, if bf_blenkernel depends on opensubdiv then LIBS in
blenkernel's CMakeLists.txt is to include OPENSUBDIB_LIBRARIES.
The change is made based on searching for used include folders
such as OPENSUBDIV_INCLUDE_DIRS and adding corresponding libraries
to LIBS ion that CMakeLists.txt. Transitive dependencies are not
simplified by this approach, but I am not aware of any downside of
this: CMake should be smart enough to simplify them on its side.
And even if not, this shouldn't affect linking time.
Benefit of not relying on transitive dependencies is that build
system is more robust towards future changes. For example, if
bf_intern_opensubiv is no longer depends on OPENSUBDIV_LIBRARIES
and all such code is moved to bf_blenkernel this will not break
linking.
The not-so-trivial part is change to blender_add_lib (and its
version in Cycles). The complexity is caused by libraries being
provided as a single list argument which doesn't allow to use
different release and debug libraries on Windows. The idea is:
- Have every library prefixed as "optimized" or "debug" if
separation is needed (non-prefixed libraries will be considered
"generic").
- Loop through libraries passed to function and do simple parsing
which will look for "optimized" and "debug" words and specify
following library to corresponding category.
This isn't something particularly great. Alternative would be to
use target_link_libraries() directly, which sounds like more code
but which is more explicit and allows to have more flexibility
and control comparing to wrapper approach.
Tested the following configurations on Linux, macOS and Windows:
- make full debug developer
- make full release developer
- make lite debug developer
- make lite release developer
NOTE: Linux libraries needs to be compiled with D6641 applied,
otherwise, depending on configuration, it's possible to run into
duplicated zlib symbols error.
Differential Revision: https://developer.blender.org/D6642
This patch contains the work that I did during my week at the Code Quest - adding support for tiled images to Blender.
With this patch, images now contain a list of tiles. By default, this just contains one tile, but if the source type is set to Tiled, the user can add additional tiles. When acquiring an ImBuf, the tile to be loaded is specified in the ImageUser.
Therefore, code that is not yet aware of tiles will just access the default tile as usual.
The filenames of the additional tiles are derived from the original filename according to the UDIM naming scheme - the filename contains an index that is calculated as (1001 + 10*<y coordinate of the tile> + <x coordinate of the tile>), where the x coordinate never goes above 9.
Internally, the various tiles are stored in a cache just like sequences. When acquired for the first time, the code will try to load the corresponding file from disk. Alternatively, a new operator can be used to initialize the tile similar to the New Image operator.
The following features are supported so far:
- Automatic detection and loading of all tiles when opening the first tile (1001)
- Saving all tiles
- Adding and removing tiles
- Filling tiles with generated images
- Drawing all tiles in the Image Editor
- Viewing a tiled grid even if no image is selected
- Rendering tiled images in Eevee
- Rendering tiled images in Cycles (in SVM mode)
- Automatically skipping loading of unused tiles in Cycles
- 2D texture painting (also across tiles)
- 3D texture painting (also across tiles, only limitation: individual faces can not cross tile borders)
- Assigning custom labels to individual tiles (drawn in the Image Editor instead of the ID)
- Different resolutions between tiles
There still are some missing features that will be added later (see T72390):
- Workbench engine support
- Packing/Unpacking support
- Baking support
- Cycles OSL support
- many other Blender features that rely on images
Thanks to Brecht for the review and to all who tested the intermediate versions!
Differential Revision: https://developer.blender.org/D3509
This is the unification of all overlays into one overlay engine as described in T65347.
I went over all the code making it more future proof with less hacks and removing old / not relevent parts.
Goals / Acheivements:
- Remove internal shader usage (only drw shaders)
- Remove viewportSize and viewportSizeInv and put them in gloabl ubo
- Fixed some drawing issues: Missing probe option and Missing Alt+B clipping of some shader
- Remove old (legacy) shaders dependancy (not using view UBO).
- Less shader variation (less compilation time at first load and less patching needed for vulkan)
- removed some geom shaders when I could
- Remove static e_data (except shaders storage where it is OK)
- Clear the way to fix some anoying limitations (dithered transparency, background image compositing etc...)
- Wireframe drawing now uses the same batching capabilities as workbench & eevee (indirect drawing).
- Reduced complexity, removed ~3000 Lines of code in draw (also removed a lot of unused shader in GPU).
- Post AA to avoid complexity and cost of MSAA.
Remaining issues:
- ~~Armature edits, overlay toggles, (... others?) are not refreshing viewport after AA is complete~~
- FXAA is not the best for wires, maybe investigate SMAA
- Maybe do something more temporally stable for AA.
- ~~Paint overlays are not working with AA.~~
- ~~infront objects are difficult to select.~~
- ~~the infront wires sometimes goes through they solid counterpart (missing clear maybe?) (toggle overlays on-off when using infront+wireframe overlay in solid shading)~~
Note: I made some decision to change slightly the appearance of some objects to simplify their drawing. Namely the empty arrows end (which is now hollow/wire) and distance points of the cameras/spots being done by lines.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6296
`BLI_strncpy_wchar_from_utf8` internally assumes `wchar_t` is 32 bits
which is not the case on windows.
The solution is to replace `wchar_t` with `char32_t`.
Thanks to @robbott for compatibility on macOS.
Differential Revision: https://developer.blender.org/D6198
Functions that utilize glyph cache should lock and unlock cache by
calling `blf_glyph_cache_acquire()` and `blf_glyph_cache_release()`.
Function `blf_glyph_cache_acquire()` will create glyph cache, if it doesn't exist.
Locking mutex is global and shared by all fonts.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5701
We cannot reliably use translations API from non-main threads.
Now storing translated strings in a static cache, with basic mechanism
to update it on language change.
Reviewers: brecht, campbellbarton
Differential Revision: https://developer.blender.org/D5350
No functional change, this adds LIB definition and args to cmake files.
Without this it's difficult to migrate away from 'BLENDER_SORTED_LIBS'
since there are many platforms/configurations that could break when
changing linking order.
Manually add and enable WITHOUT_SORTED_LIBS to try building
without sorted libs (currently fails since all variables are empty).
This check will eventually be removed.
See T46725.
We do not support special color fonts (like colored emoji fonts), so
don't crash when trying to create a preview for unsupported fonts.
Reviewed By: Brecht
Differential Revision: http://developer.blender.org/D4590
There are two issues at play here.
First, BLF_width computed a width that was not wide
enough to actually hold the text.
Second, blf_glyph_calc_rect_test computed an incorrect
rect->xmax when the glyph was moved to the left a bit.
We ignore the overlap on the left, but the right side
should still be adjusted accordingly.
The main problem was that the character `J` has "negative kerning".
It was cut off because it started outside of the clipping rectangle.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D4513
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
Allows users to select a font for text strips in the video sequence editor.
Related: 3610f1fc43 Sequencer: refactor clipboard copy to no longer increase user count.
Reviewed by: Brecht
Differential Revision: https://developer.blender.org/D3621
