Now the factor works similar to other Blender areas to make the factor
more consistent for artists. The value 0% means equal to original
stroke, 100% equal to final stroke (50% means half way). Any value below
0% or greater than 100% create an overshoot of the stroke.
Root of the issue is that active render index became wrong. This is the actual
thing to be fixed, but as usual this is quite tricky to reproduce. Since such
bad situation might have happened more and fix isn't really difficult or
intruisive let's avoid crash for now.
Can be revisited once we figure out root of the issue.
Nice for 2.78 release.
Own fault in new ID management work, thought rebuild the DAG itself was
enough to actually update whole scene, but we actually need to tag datablocks
for update as well, when we change (or remove) one of their ID pointers...
OCD commit, but cleans the code a bit:
- the first `if 0` block was supposed to draw collision objects but is
vastly outdated as most of the SmokeCollisionSettings member variables
were removed a few years ago and collision objects are drawn like other
objects anyway. Also it was committed already commented out back in
2009.
- the second `if 0` block was doing pretty much the same thing as the
few lines above it.
This is really hack-fix actually, not sure why `get_pointcache_keys_for_time()` seems to assume
it will always find key for given part index at least for current frame, and whether this assumption
is wrong or whether bug happens elsewhere...
Anyway, this is to be wiped out in 2.8, so no point loosing too much time on it, for now merely
returning unchanged (i.e. zero'ed) ParticleKeys in case index2 is invalid. Won't hurt anyway,
even if this did not crash in release builds, would be returning giberish values.
When drawing with Grease Pencil "continous drawing" for a long time
(i.e. basically, drawing a very large number of strokes), it could be
possible to cause lower-specced machines to run out of RAM and start
swapping. This was because there was no limit on the number of undo
states that the GP undo code was storing; since the undo states grow
exponentially on each stroke (i.e. each stroke results in another undo
state which contains all the existing strokes AND the newest stroke), this
could cause issues when taken to the extreme.
See commit's comments for details, but this boils down to: do not try to use
purely runtime cache data as a 'real' ID pointer in readcode, it's likely
doomed to fail in some cases, and is bad practice in any case!
Thix fix implies dupliweight's object will be invalid until first scene update
(i.e. first particles evaluation).
Two new modal operators to create a grease pencil interpolate drawing
for one frame or a complete sequence between two frames. For drawing
the temporary strokes in the viewport, two drawing handlers have been
added to manage 3D and 2D stuff.
Video: https://youtu.be/qxYwO5sSg5Y
The operator shortcuts are Ctrl+E and Ctrl+Shift+E. During the modal
operator, the interpolation can be adjusted using the mouse (moving
left/right) or the wheel mouse.
immBegin requires us to know how many vertices will be drawn. Most times this is fine, but sometimes it can be tricky. Do we make the effort to count everything in one pass, then draw it in a second?
immBeginAtMost makes this simple. Example: I'll draw at most 100 vertices. Supply only 6 verts and it draws only 6.
Any unused space is reclaimed and given to the next immBegin.
Was using GL_NONE to mean "no primitive" but GL_NONE and GL_POINTS are both defined as 0x0000.
Introducing PRIM_NONE = 0xF which does not clash with any primitive types.
This reverts commit 9444cd56db.
This commit caused some flickering in the bones when swapping IK to Fk.
While it's unclear why such change caused any regressions, let's revert
it to unlock the studio.
Fix cast shadows options (in material tab) not working in the viewport.
An off-by-one error. See D2194 for more.
Committing for Ulysse Martin (youle) who found & fixed this.
In User Preferences, Properties Editor and toolshelf, Ctrl+Tab and Ctrl+Shift+Tab now activates the next or previous space context (or category in case of toolshelf tabs), respectively.
For Properties Editor such functionality was completely missing, only toolshelf allowed cycling using ctrl+mousewheel (or only mousewheel while hovering tab region). Ctrl+Tab and Ctrl+Shift+Tab are common web browser shortcuts, so they're a reasonable choice to go with.
Reaching the first/last item doesn't cause the cycling to stop, we continue at the other end of the list then. (I didn't add this to Ctrl+Mousewheel toggling in toolshelf since I wanted to keep its behavior unchanged.)
We could get rid of (Ctrl+)Mousewheel cycling in toolshelf, but this may break user habits.
The cycling happens using a new operator, UI_OT_space_context_cycle, for toolshelf tabs it's hardcoded in panel handling code though.
Generalized rna_property_enum_step a bit and moved it to rna_access.c to allow external reuse.
Reviewed By: venomgfx
Differential Revision: https://developer.blender.org/D2189
This is a bug in the multithreaded task manager in negative value range.
The problem here is that if previter is unsigned, the comparison in the
return statement is unsigned, and works incorrectly if stop < 0 &&
iter >= 0. This in turn can happen if stop is close to 0, because this
code is designed to overrun the stop by chunk_size*num_threads as
the threads terminate.
This probably should go into 2.78 as it prevents a crash.
Based on patch by @codemanx, but with slightly less verbose descriptions.
More detailed behavior etc. rather belongs to doc/python_api/examples/bpy.ops.x.py imho.
Was incorrect indexing done in the array. Caused by 5abae51.
Not sure why it needed to be changed here, but array here is supposed to be
a loop data, so bringing back loop index as it originally was. The shading was
wrong in edit mode with BI active as well (so it's not like it's needed for
BI only).
Patch in collaboration with Alexander Gavrilov (angavrilov), thanks!
Should be double-checked and ported to 2.78.
Crash was due to a name collision in Alembic objects caused by the fact
that names derive from the one of the Blender object. An object having
multiple particles system would thus give its name to various
subobjects.
Now use the name of the particles system for the Alembic object.
Another great example of inconsistency in usercount handling - dupli_group was considered
as refcounted by readfile.c code (and hence by library_query.c one, which is based on it),
but not by editor/BKE_object code, which never increased group's usercount when creating
an instance of it etc.
To be backported to 2.78.
We did not update them for really long time and the currently used
hashes are quite old and probably wouldn't work without manually
updating all submodules.
Not as if it's something totally crucial (we ask to update submodules
all the times and that's what `make update` does) but updating hashes
will save some cloning/checkout time.
Includes:
- Version bump to 2.78
- Doxy file update
- New splash screen
- Wrapped some do_versions with version check
- Updated template to use proper font
After poking around a lot it seems Droid Sans was used during 2.7x series.
(or at least difference between using this font and comparing to previous
splash screens gives none visible difference).
There were two inconsistencies in how 'save image' op initiated its settings:
* It would always use ImBuf->planes value.
* It would always use Image views settings.
Both of those settings should come from scene->r.im_format (as everything else)
when saving render/compo result...
Didn't do any bisecting, but guess it's caused rBb54e95a5c8dcb7 (2.74 is fine, 2.75 isn't).
I think this fix makes some other hacks redundant but need to check details (will do when we're back to bcon1 to avoid regressions).
Issue was that the wm.open_mainfile OP caused all handlers to be removed and since rB45592291 cancelled (which is correct in general), the menu that triggered the OP should not be cancelled though.
Not sure if this is a nice fix or not, it's however the safest fix I found. A different fix would be to call UI_popup_block_close before WM_operator_call_ex (in dialog_exec_cb), but not sure how safe this is and want to further investigate if it makes other hacks/fixes redundant.
There's still a crash with --debug-memory that confused the heck out of me (since I always have --debug-memory enabled), but I'll commit fix for that separately.
