This patch adds support for drag and dropping colors (from color buttons) into
the Compositing, Shading and Geometry node trees.
Additional support was added for dragging and dropping colors with an Alpha
component (which was previously ignored), both in the context of the Node Editor
and for Color Buttons in general. This handles cases like drag and dropping a
color from an RGB to an RGBA button, which recreates the color with a default
Alpha value of 1.0.
Pull Request: https://projects.blender.org/blender/blender/pulls/129026
Currently each node's position is stored in the coordinate space of
its parent. To find the location of a node on the canvas, we have to
apply the translation of each of its parents. Also, nodes have hidden
"offset" values used while transforming frame nodes. Together,
those made the system much more complicated than necessary,
and they made the Python API ineffective.
This commit removes usage of the offset values and moves nodes
to be stored in the "global" space of the node canvas. It also resolves
some weird behavior when resizing frame nodes, and fixes a few bugs.
The change is forward compatible, so we still write files with nodes in
the old parent-space format. In 5.0 the conversion when writing can be
removed. The existing Python API also stays the same. A new
"location_absolute" property gives node locations in global space,
and changing the old property also moves the child nodes of frames.
Resolves#92458, #72904.
Pull Request: https://projects.blender.org/blender/blender/pulls/131335
Add a new shader specifically for node sockets rather than using the
keyframe shader.
Motivation:
1. Allow easier addition of new socket shapes
2. Simplify socket drawing by avoiding special handling of multi-inputs
3. Support multi-inputs for all socket types (diamond, square, etc.)
The new shader is tweaked to look the same to the old ones.
**Comparison**
The biggest difference is that the multi socket is now more consistent
with the other sockets.
For single sockets there can be small size differences depending on zoom
level because the old socket shader always aligned the sockets to the
pixel grid. This could cause a bit of jiggling compared to the rest of
the node when slowly zooming. Therefore I left it out of the new shader
and it now scales strictly linear with the view.
**Multi Socket Types**
While there currently is no need for (.) internally, there are a few
obvious use-cases for multi-input field (diamond) sockets like
generalized math nodes with an arbitrary number of inputs (Add,
Multiply, Minimum etc.).
Co-authored-by: Jacques Lucke <jacques@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/119243
The issue was that changing the area did not immediately update the
`snode->edittree` when changing between different node editor types. That update
only happened later in `node_area_refresh`. However, by that time, the `poll`
function of the modal operator has already succeeded even though when there
operator actually starts `poll` would not succeed anymore.
Pull Request: https://projects.blender.org/blender/blender/pulls/129870
For C/C++ doc-strings should be located in headers,
move function comments into the headers, in some cases merging
with existing doc-strings, in other cases, moving implementation
notes into the function body.
This makes the input field much wider. I enabled this for most string sockets
except for a few where it is important to see the label even if the user has
inserted a string already (usually because there is more than one string input).
Pull Request: https://projects.blender.org/blender/blender/pulls/127992
This operator sets the new default group node width (from e842966c5e) based on
the parent group node. This makes it easier to initialize the value. Without
this, one had to create and delete the group node potentially many times to find
a good default width.
Pull Request: https://projects.blender.org/blender/blender/pulls/126239
The swapping code incorrectly expected the link to have a start and end.
However, this was not necessarily the case when attempting to create
a link from a node to itself. This case has special handling in
`node_link_find_socket`.
This patch removes the Auto Render option from the compositor. This is
done for the following reason:
- The option didn't really work except in the case of transforming an
object. So it wasn't really reliable.
- It made little sense to use since the introduction of the Viewport
Compositor.
- It had a number of UX issues, including the fact that it can't be used
with animation playback, and the fact that rendering can get in the
way of the UI depending on the preferences for temporary editors.
Pull Request: https://projects.blender.org/blender/blender/pulls/123132
Remove the button "Update Views" that requires the user to update visible views manually. This is now consistent with the automatic update of compositor tree, when views are added or deleted, see #120685.
The patch also addresses #109866 (not really a fix since behavior in that bug report is intentional).
Pull Request: https://projects.blender.org/blender/blender/pulls/122290
The goal here is to make it easier to make node links. Previously, it was quite
easy to accidentally start box selection or to trigger the link-drag-search when
that was not intended.
Now, the tolerances are a bit easier to work with. Also, instead of trying to use
the first socket that is close enough, it will find the closest socket instead. It feels
much better in my testing already, but obviously the values can be tuned more
with some testing.
Also we have to make sure to not accidentally make other things like resizing
nodes harder.
Pull Request: https://projects.blender.org/blender/blender/pulls/115010
Customs sockets always ignore their draw_color method and are always
drawn using a magenta color.
This is a regression that was introduced in e071288ab2. The commit used
the simple variant even for drawing nodes where a context is available.
So this patch mostly reverts those changes.
Pull Request: https://projects.blender.org/blender/blender/pulls/114148
The last good commit was 8474716abb.
After this commits from main were pushed to blender-v4.0-release. These are
being reverted.
Commits a4880576dc from to b26f176d1a that happend afterwards were meant for
4.0, and their contents is preserved.
Currently nodes are reordered so that the "on top" nodes are last in
the list. Node order changing for simple operations like selection
means we either have to reevaluate the node tree data-block on
selections or accept that the evaluated order can be different from the
original. Currently we do the latter (see d76a0e98ba), but
makes it complex to access nodes by index, and is hard to reason about.
Instead of reordering nodes, store the ui order in the node itself
and sort the nodes before drawing them or doing any processing
that depends on the "depth."
The "selected_nodes" list in the context is no longer ordered by the
recent selection.
Pull Request: https://projects.blender.org/blender/blender/pulls/113419
The layout for this is not great but consistent with existing
collapse/expand functionality there. There are ideas to replace this
entire material properties drawing longer term, but for 4.0 it's
important to show the panels in some way.
Pull Request: https://projects.blender.org/blender/blender/pulls/112591
In the add modifier menu, 3D viewport menus for node tools, and the node
editor add menu, assets not in catalogs are added to an "No Catalog"
menu rather than not being accessible at all.
This makes the default behavior when adding a node tool "not broken"
so at least something happens by default. The question of "How do I
add a catalog?" is much better than "Why didn't anything happen?"
Implements #111529
See #101778
---
Pull Request: https://projects.blender.org/blender/blender/pulls/112355
Now that specific menus can be searched directly (see 7f9d51853c),
there is no need to maintain separate search functionality for adding
nodes. This PR removes the add node search. In a way this brings us
closer to the `NodeItem` situation before, but the setup is more
flexible since the menus are more standard and easier to customize.
In the few ways we customized the node search items before, this gives
us the same results as before. Overall the searching is less flexible,
but I think that is just a tradeoff we have to accept for the simplicity
of searching menus. In the future menus could be made more dynamic,
with each builtin node's menu path stored on the node type, similar to
assets. That might be a nice compromise. In the meantime this code
is just dead weight.
Pull Request: https://projects.blender.org/blender/blender/pulls/112056
Part 3/3 of #109135, #110272
Switch to new node group interfaces and deprecate old DNA and API.
This completes support for panels in node drawing and in node group
interface declarations in particular.
The new node group interface DNA and RNA code has been added in parts
1 and 2 (#110885, #110952) but has not be enabled yet. This commit
completes the integration by
* enabling the new RNA API
* using the new API in UI
* read/write new interfaces from blend files
* add versioning for backward compatibility
* add forward-compatible writing code to reconstruct old interfaces
All places accessing node group interface declarations should now be
using the new API. A runtime cache has been added that allows simple
linear access to socket inputs and outputs even when a panel hierarchy
is used.
Old DNA has been deprecated and should only be accessed for versioning
(inputs/outputs renamed to inputs_legacy/outputs_legacy to catch
errors). Versioning code ensures both backward and forward
compatibility of existing files.
The API for old interfaces is removed. The new API is very similar but
is defined on the `ntree.interface` instead of the `ntree` directly.
Breaking change notifications and detailed instructions for migrating
will be added.
A python test has been added for the node group API functions. This
includes new functionality such as creating panels and moving items
between different levels.
This patch does not yet contain panel representations in the modifier
UI. This has been tested in a separate branch and will be added with a
later PR (#108565).
Pull Request: https://projects.blender.org/blender/blender/pulls/111348
Listing the "Blender Foundation" as copyright holder implied the Blender
Foundation holds copyright to files which may include work from many
developers.
While keeping copyright on headers makes sense for isolated libraries,
Blender's own code may be refactored or moved between files in a way
that makes the per file copyright holders less meaningful.
Copyright references to the "Blender Foundation" have been replaced with
"Blender Authors", with the exception of `./extern/` since these this
contains libraries which are more isolated, any changed to license
headers there can be handled on a case-by-case basis.
Some directories in `./intern/` have also been excluded:
- `./intern/cycles/` it's own `AUTHORS` file is planned.
- `./intern/opensubdiv/`.
An "AUTHORS" file has been added, using the chromium projects authors
file as a template.
Design task: #110784
Ref !110783.
AOV/group/material output nodes can now be previewed the same way the
other nodes are.
This patch also improves the socket detection of the preview by using
`get_main_socket` which takes care of the priorities of the sockets.
Pull Request: https://projects.blender.org/blender/blender/pulls/110945
When the overlays are hidden or the previews overlays are hidden, it is
more consistent to have the preview toggle button hidden than shown.
This patch also removes the preview rendering when the previews are
hidden.
Pull Request: https://projects.blender.org/blender/blender/pulls/110949
First implementation of node previews in the shader node editor. Using
the same user interface as compositor node previews, most shader nodes
can now be previewed (except group in/output and material output).
This is currently still an experimental feature, as polishing of the
user experience and performance improvements are planned. These will
be easier to do as incremental changes on this implementation.
See #110353 for details on the work that remains to be done and known
limitations.
Implementation notes:
We take advantage of the `RenderResult` available as `ImBuf` images to
store a `Render` for every viewed nested node tree present in a
`SpaceNode`. The computation is initiated at the moment of drawing nodes
overlays.
One render is started for the current nodetree, having a `ViewLayer`
associated with each previewed node. We separate the previewed nodes in
two categories: the shader ones and the non-shader ones.
- For non-shader nodes, we use AOVs which highly speed up the rendering
process by rendering every non-shader nodes at the same time. They are
rendered in the first `ViewLayer`.
- For shader nodes, we render them each in a different `ViewLayer`, by
rerouting the node to the output of the material in the preview scene.
The preview scene takes the same aspect as the Material preview scene,
and the same preview object is used.
At the moment of drawing the node overlay, we take the `Render` of the
viewed node tree and extract the `ImBuf` of the wanted viewlayer/pass
for each previewed node.
Pull Request: https://projects.blender.org/blender/blender/pulls/110065
This PR adds a new operator to run a node group on object geometry.
Only curves sculpt mode is supported for now, to simplify the design.
A new geometry node editor context to edit operator groups is also
added. This allows changing any node group, rather than only node
groups that are part of the active modifier context.
3D viewport menus are added with any geometry node group
asset in a catalog that contains the `Operator` tag. Currently Blender
must be restarted to refresh the list of available operators.
This is only the first phase of the node group operator feature.
Many more features will be added in next steps.
See #101778
Pull Request: https://projects.blender.org/blender/blender/pulls/108947
It's a bit unfortunate that the `node_map` in both cases has different
constness, so a conversion or `reinterpret_cast` is necessary. For now
a new temporary map is created as this is less error prone. That's not
ideal but better than the duplication from before.
Fix a mistake in commit 2ce5fc4a3e that caused a crash when detaching
node links from input sockets.
When a link is detached from an input socket, `nodeRemLink` nulls the
`link` pointer of the socket.
So before the next update inputs are linked but don't have a valid `link`
pointer causing the crash, when trying to access the link in
`std_node_socket_draw`.
The introduced check avoids the crash and is more correct since it
doesn't just check one link for multi-input sockets.
Pull Request: https://projects.blender.org/blender/blender/pulls/108623
Change the active area along the perimeter of frame nodes to have a more
consistent width independently of the zoom level so frame nodes can more
easily be grabbed and resized when zoomed out.
Pull Request: https://projects.blender.org/blender/blender/pulls/108359
A lot of files were missing copyright field in the header and
the Blender Foundation contributed to them in a sense of bug
fixing and general maintenance.
This change makes it explicit that those files are at least
partially copyrighted by the Blender Foundation.
Note that this does not make it so the Blender Foundation is
the only holder of the copyright in those files, and developers
who do not have a signed contract with the foundation still
hold the copyright as well.
Another aspect of this change is using SPDX format for the
header. We already used it for the license specification,
and now we state it for the copyright as well, following the
FAQ:
https://reuse.software/faq/
See: https://projects.blender.org/blender/blender/issues/103343
Changes:
1. Added `BKE_node.hh` file. New file includes old one.
2. Functions moved to new file. Redundant `(void)`, `struct` are removed.
3. All cpp includes replaced from `.h` on `.hh`.
4. Everything in `BKE_node.hh` is on `blender::bke` namespace.
5. All implementation functions moved in namespace.
6. Function names (`BKE_node_*`) changed to `blender::bke::node_*`.
7. `eNodeSizePreset` now is a class, with renamed items.
Pull Request: https://projects.blender.org/blender/blender/pulls/107790
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
Previously the only way to control the subtype was to remove the group
input or output and create it again. This commit adds a dropdown to
change an existing socket, for supported socket types.
Based on a patch by Angus Stanton: https://developer.blender.org/D15715
It was necessary to fix the UI code slightly; the layout's context
wasn't being used in calls to an operator's enum items callback.
Pull Request: https://projects.blender.org/blender/blender/pulls/105614
The goal is to solve confusion of the "All rights reserved" for licensing
code under an open-source license.
The phrase "All rights reserved" comes from a historical convention that
required this phrase for the copyright protection to apply. This convention
is no longer relevant.
However, even though the phrase has no meaning in establishing the copyright
it has not lost meaning in terms of licensing.
This change makes it so code under the Blender Foundation copyright does
not use "all rights reserved". This is also how the GPL license itself
states how to apply it to the source code:
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software ...
This change does not change copyright notice in cases when the copyright
is dual (BF and an author), or just an author of the code. It also does
mot change copyright which is inherited from NaN Holding BV as it needs
some further investigation about what is the proper way to handle it.
