* Grease Pencil works again from Image Editor now. For now, the GPencil datablock is linked to the Image Editor space, but this can be changed if need be.
* Made Grease Pencil hotkeys into a separate Grease Pencil keymap, which can get included automagically like for frames/ui/v2d/etc. by supplying ED_KEYMAP_GPENCIL as part of st->keymapflag
* Temporarily restored the nasty hack to make View2D-aligned sketches in Image Editor to use OpenGL lines only. I still dunno why this doesn't work normally.
(Probably related is that strokes are not visible when there's no image visible atm).
* Add RenderResult.load_from_file to load whole multilayer exr's at once.
* Removed x/y offset from RenderLayer.load_from_file, better to encourage
using offset in begin_result() to minimize memory usage.
* Added WITH_OPENEXR in some screen/file/image module for scons/make, exr
was not working in some places there.
* Replaced FACESEL_PAINT_TEST macro with paint_facesel_test. This removes one more thing from BKE_global, and it'll make it easier to localize.
* Fixed sculpt paint cursor sometimes not showing.
* When resizing the window, the top position is now preserved,
instead of the center position.
* Fix zoom level not being preserved in various cases, when
changing both with and height. This replaces some earlier code
which did this at screen level but wasn't very reliable.
* Different tabs now each preserve their own scroll.
* When switching between tabs, it now scrolls to show as many
buttons as possible, instead of possibly showing empty space.
There is a trade-off here between doing that keeping the
buttons in the same place, no ideal solution exists I think.
* Change zooming in/out to be symmetric, for example doing
numpad + then - did not give the original zoom level back.
* Added some calls to avoid hanging tooltips when manipulating
the view.
Internals:
* Added V2D_KEEPOFS_X and V2D_KEEPOFS_Y to keep the top/bottom
rather than the center.
* Renamed V2D_KEEPZOOM to V2D_LIMITZOOM (seems more appropriate),
and make V2D_KEEPZOOM preserve the zoom level.
* Image window only show game properties in game mode.
* Fix image window render info drawing wrong with alpha enabled.
* Win32 editmode cursor now uses a different one than the system
cursor, that one is barely visible, especially in the new theme
colors.
* Center text in operator header print.
* Fix sequencer unlock shortcut key.
* Fix uv layer / vertex color active render button now graying out.
* Workaround to get default zoom level 1:1 again for new buttons
(will try to fix properly later, is due to scrollbars).
* Side panels now use list widgets.
* Enabled theme colors for side panel.
* Add button in bookmarks panel.
* Operator panel title now uses operator name.
* For unix, added / to system, and home and desktop to bookmarks.
* For opening fileselect with filter, cleaned up the code a bit,
adding WM_operator_properties_filesel instead of duplicating code.
* Also added filter for all operators calling fileselect, only image
and file open did it before.
* Hide . files by default, and also hide files ending with ~.
* Added back .. (but not .) in the file list, I really missed this.
* File highlight now only happens when you're actually over a file,
instead staying after you move the mouse away.
* Fix some redraw/refresh issues.
New:
* added filter and display to some operator properties. Now file browser opens showing only .blend files and folders on file->open and on image->open changes to image display and only shows images and movies.
Fixes:
* fixed stupid removal of wrong prototype in last commit
* fixed a few warnings
New feature: allowing to open temporarily windows for output.
Implemented for:
- Render output (use output menu "new window" option).
- User Preferences (alt+U, plus added in 'File' menu)
Currently the window opens where your mouse is. The Render window
works as usual, with ESC or F11 moving it to back or front again.
That allows the window position to remain where you moved it on
new renders.
If you close a render window when it renders, the render thread
will be killed.
User prefs show 'info window' now... i thought we'd use outliner?
Anyhoo, I've made the 'save settings' to close the 2nd window as
well.
Opening a secondary file window for save I'll check on later,
this has to be checked with the current event system still.
the WM_window_open_temp() api call for this maintains currently
a *single* temp window. If you have a render window open, and call
for the preferences, the render window will be used for it. And
the other way around.
On closing the blender window, the temp windows close automatically
when there's no regular window open, and blender quits.
- 1st stage: Linear Workflow
This implements automatic linear workflow in Blender's renderer. With the
new Colour Management option on in the Render buttons, all inputs to the
renderer and compositor are converted to linear colour space before
rendering, and gamma corrected afterwards. In essence, this makes all
manual gamma correction with nodes, etc unnecessary, since it's done
automatically through the pipeline.
It's all explained much better in the notes/doc here, so please have a look:
http://wiki.blender.org/index.php/Dev:Source/Blender/Architecture/Colour_Management
And an example of the sort of difference it makes:
http://mke3.net/blender/devel/rendering/b25_colormanagement_test01.jpg
This also enables Colour Management in the default B.blend, and changes the
default lamp falloff to inverse square, which is more correct, and much
easier to use now it's all gamma corrected properly.
Next step is to look into profiles/soft proofing for the compositor.
Thanks to brecht for reviewing and fixing some oversights!
* Objects now support up to 32767 material slots. It's easy to
increase this further, but I prefer not to increase the memory
usage of mesh faces, it seems unlikely that someone would
create 32767 distinct materials?
* Forward compatibility: the only thing you can potentially lose
reading a 2.5 file in 2.4 is object linking (instead of default
data), though usually that will go fine too. Reading files with
> 32 material slots in 2.4 can start giving issues.
* The ob->colbits variable is deprecated by the array ob->matbits
but I didn't remove the ob->colbits updates in very few places
it is set.
* I hope I changed all the relevant things, various places just
hardcoded the number 16 instead of using the MAXMAT define.
* Join Objects operator back. This is using the version from the
animsys2 branch coded by Joshua, which means it now supports
joining of shape keys.
* Fix for crash reading file saved during render.
Render usability:
- Option back to render to imagewindow, or fullscreen.
The latter is default. Setting is stored in Scene.
- Added button in output panel, the option "to new window" will follow!
- F11 again toggles render view
(moved MS Windows "full screen" to shift+F11 for now)
* 3D view Mesh menu works again, but incomplete.
* Add Properties and Toolbar to 3D View menu.
* Added "specials" menus back, vertex/edge/face and general.
* Various fixes in existing mesh operators, some were not working.
* Add MESH_OT_merge.
* Merge all subdivide ops into MESH_OT_subdivide, subdivide code
changes to make smooth + multi give good results.
* Rename all select inverse ops to *_OT_select_inverse.
* Fix "search for unknown operator" prints at startup, and some
warnings in py code.
* Don't run .pyc files on startup.
* Remove unused image window header C code.
* Rename BIF_transform/retopo.h to ED_transform/retopo.h
for consistency.
* Move MESH_OT_duplicate_add to editmesh_add.c.
* Remove some code from BIF_gl.h which is not needed there
anymore.
* Context panel now draws without header, with arrows, no scene name.
* Softbody vertex group search popup.
* Improve names for autogenerated shortcut keys in menus.
* Make most Select menus in the 3D view header work.
* Fix armature border select selection syncing.
* Add POSE_OT_select_constraint_target,
MESH_OT_select_by_number_vertices, MESH_OT_select_vertex_path.
* Merge mesh select similar into one operator.
* Don't give MESH_OT_select_random Space hotkey.
* Add DAG_object_flush_update to many mesh edit tools, not calling this
will crash with modifiers.
* RNA_def_enum_funcs for dynamic enums in operators, but not very useful
without context yet.
* Fix refresh issue with image window header + editmode.
* Fix drawing of shadow mesh for image painting.
* Remove deprecated uiDefMenuButO and uiDefMenuSep functions.
* Remove keyval.c, code is in wm_keymap.c already.
* Rename WM_operator_redo to WM_operator_props_popup.
Image Window
* Unpack operator now works.
* Some small layout code tweaks.
Info Window Header
* Moved to python UI code.
* template_running_jobs, template_operator_search added.
* Ported external data operators: pack/unpack all, make
paths relative/absolute, find/report missing files.
Also
* Report RPT_INFO too, not only warnings and errors.
* Run UI handle functions after RNA and Operators.
* Rename particle system add/remove operators, to not
include "slot", that's only there for materials because
that's what they are called now in RNA.
check Save Image or Export PLY operator for example.
Also these code changes:
* Added some RNA collection iterator macros to simplify code.
* Fix bpy.props.BoolProperty not working correct.
* Merge uiDefAutoButsRNA/uiDefAutoButsRNA_single into one.
* Menu and header more complete now.
* Clean up Game Properties panel and moved View Properties panel
to python.
* Fix some drawing issues when combining tiles, repeat and aspect,
some also from 2.4x, these options didn't work together 100%.
* Moved proportional edit, snap, autokey mode, and a few others
from Scene to ToolSettings.
* RNA wrapped properties in ToolSettings for the UV editor:
proportional edit, snap settings, selection modes.
* Started porting over to python, menus nearly done, header WIP.
* Game Properties panel is in python too
* Deprecated "Tiles" as a per face flag here, now it's always on
the image, used to be both, working in a very confusing way.
Unlikely someone actually had a purpose for this being per face.
* Remove GPC_PolygonMaterial.cpp/h, it's not actually used anymore,
so I don't want to bother updating it.
* Fix crash in image painting (own mistake in porting over bugfix
from 2.4x).
* Added icon to property and enum property items. The latter is
responsible for the large number of files changed.
* For RNA functions, added PROP_RNAPTR flag to ask for a PointerRNA
as argument instead of a C pointer, instead of doing it implicitly
with the AnyType type.
* Material: properly wrap diffuse/specular param variables, and
rename some things for consistency.
* MaterialTextureSlot: added "enabled" property (ma->septex).
* Image: make animated property editable.
* Image Editor: make some things editable, notifiers, respect state.
* Context: fix issue with screen not being set as ID.
svn merge https://svn.blender.org/svnroot/bf-blender/trunk/blender -r19820:HEAD
Notes:
* Game and sequencer RNA, and sequencer header are now out of date
a bit after changes in trunk.
* I didn't know how to port these bugfixes, most likely they are
not needed anymore.
* Fix "duplicate strip" always increase the user count for ipo.
* IPO pinning on sequencer strips was lost during Undo.
* Context now allows pinning a datablock, independent of
selection.
* Initial ID browse buttons for most buttons tabs.
* Browsing from world to texture now displays world textures
again, but is a bit of a hack, not sure there is a right
way to do this.
* There's a button to switch between active materials and
textures now, only temporary though.
* There's some code to put context part in own region,
disabled still because it doesn't work that well yet.
* Added Constraints template and Add Constraint operator.
* Added toggle=True/False parameter to uiItemR, to get a
toggle button (actual button) rather than an "option"
button (checkbox)
* Added OPTION/OPTIONN button type, to distinguish with
TOG/TOGN.
RNA:
* Make all modifier pointers editable, including correct updates.
* Added notifiers and updates to constraints.
* Fix a stack corruption, pointed out by Andrea, and potentially
causing crashes.
This includes a bunch of new object primitive icons
which would be great to get into the 'add object' menus,
they're not there yet. The specific lamp data type icons
are now used in the outliner though, which is very helpful.
* Fix buttons jumping around when resizing and zoom. Part of this was
adding a tiny a 0.001f offset in UI_view2d_view_ortho, otherwise the
rounding is unpredictable (used to be 0.375f, but that was disabled).
* Fix various issues with zooming, panning panels. V2D_LOCKOFS_X/Y is
now taken into account in more places in the view2d code, to avoid
zooming into the center or panning out of the view.
* Remove "Free" align mode in buttons window (it's not really useful).
* View3D/Graph/Image editors now use the same PanelType system as the
buttons window, means some deprecated panel code could be removed.
* Some small visual tweaks for panels.
* View 2D Reset operator (Home key), to reset zoom and panning for panels.
* Added argument to set number buttons as sliders (slider=True for itemR).
* Ignore labels for button alignment (doesn't look right).
* Fix some use of context.main in py scripts, should get data from active
object instead.
* Fix autotexspace -> auto_texspace in py script.
Enable with WITH_LCMS (options have been added for scons).
lcms is very common on linux package managers, so no need to add in extern (IMHO). Libs for windows can be added to /lib
Code is mostly a proof of concept with hardcoded path for icc profile (taken from the lcms test suite).
Adding this now to svn so it doesn't rot on my hard drive. People interested in pushing it forward should feel free to dig in the code or poke me about it.
* Buttons are now created first, and after that the layout is computed.
This means the layout engine now works at button level, and makes it
easier to write templates. Otherwise you had to store all info and
create the buttons later.
* Added interface_templates.c as a separate file to put templates in.
These can contain regular buttons, and can be put in a Free layout,
which means you can specify manual coordinates, but still get nested
correct inside other layouts.
* API was changed to allow better nesting. Previously items were added
in the last added layout specifier, i.e. one level up in the layout
hierarchy. This doesn't work well in always, so now when creating things
like rows or columns it always returns a layout which you have to add
the items in. All py scripts were updated to follow this.
* Computing the layout now goes in two passes, first estimating the
required width/height of all nested layouts, and then in the second
pass using the results of that to decide on the actual locations.
* Enum and array buttons now follow the direction of the layout, i.e.
they are vertical or horizontal depending if they are in a column or row.
* Color properties now get a color picker, and only get the additional
RGB sliders with Expand=True.
* File/directory string properties now get a button next to them for
opening the file browse, though this is not implemented yet.
* Layout items can now be aligned, set align=True when creating a column,
row, etc.
* Buttons now get a minimum width of one icon (avoids squashing icon
buttons).
* Moved some more space variables into Style.
* Made separator item work horizontal & vertical.
* Add colon (:) automatic for int/float/enum/string.
* Added space variables to uiStyle and use them in the
layout engine.
* Added initial World buttons by Thomas Dinges, thanks!
* Added some code for modifiers in the Object Data context.
This will become a template though.
* Use a common poll() callback in the scripts to reduce code.
* Headers and menus can now be created in python.
* Replaced the uiMenuItem functions to create menus with equivalent
uiItem functions using a layout, removing duplicated code.
* More uiItem functions are now exposed to python.
* The text editor header, panels and one of its menus are now created
in space_text.py.
* Buttons window data context icon new changes depending on active
object.
Issues
* Icons are not wrapped yet, hardcoded ints at the moment.
* The ID browse template is unfinished.
- Fun for testers: Added "Redo Operator" Panel in view3d 'nkey' region.
It's going to be part of tools UI I know, but this will give good
tests of what goes on with operators. I had to add small fixes in
Transform for it already. :)
One important issue to note is that it lists every operator, also from
non-3D-window ops. Needs checked or classified somehow.
- Fix: removed bad 2.4x hack from how pulldown menus were defined. Made
widget code cleaner, and will show menus like SHIFT+A correct now.
More cleanup!
- removed old UI font completely, including from uiBeginBlock
- emboss hints for uiBlock only have three types now;
Regular, Pulldown, or "Nothing" (only icon/text)
- removed old font path from Userdef
- removed all old button theme hinting
- removed old "auto block" to merge buttons in groups
(was only in use for radiosity buttons)
And went over all warnings. One hooray for make giving clean output :)
Well, we need uniform definitions for warnings, so people at least fix
them... here's the real bad bugs I found:
- in mesh code, a call to editmesh mixed *em and *me
- in armature, ED_util.h was not included, so no warnings for wrong call
to ED_undo_push()
- The extern Py api .h was not included in the bpy_interface.c, showing
a several calls using different args.
Further just added the missing includes, and removed unused vars.
Various ui fixes:
- panel drawing now correctly follows scaled view
- made imagewindow buttons using TH_PANEL color back (was too dark)
- click on open/close panel was wrong
- menu items disabling now draws correct
- curve/hsv widgets didn't draw on right locations
- numsliders have nicer interior slider decoration
- new type TOGBUT to enforce old style toggle button (not new type
'option button' with checkmark
- (temp) disabled live updating while using Curve widget, was
too slow to be fun. Needs general solution :)
Grand cleanup:
- removal of FTF and ftfont dir
- removal of text.c which wrapped it
- wrapped old text drawing code temporarily, need to decide how 'style'
will behave per editor when you draw strings outside interface code....
wouldn't be very useful to set fonts locally all over?
* Fix sometimes non-working close/open button.
* Fix panels being a bit out of the view on startup.
* Fix too large totrct region for view2d.
* Fix wrong panel order when changing vertical <-> horizontal.
* Fix wrong panel positions after switching contexts.
* Fix an access of freed memory when collapsing panels.
* Free align mode works again.
* Animations work again.
EditMesh *EM_GetEditMesh(Mesh *me);
void EM_EndEditMesh(Mesh *me, EditMesh *em);
as discussed on the mailling list, this is to facilitate migration to bmesh.
next step is to merge this this to the bmesh branch. this was done in the 2.5
branch to prevent too great a divergance.
also, made makesdna/makesrna work on cygwin/msvc2008/scons.
- use select as a suffix eg UV_OT_loop_select -> UV_OT_select_loop
- Each select all operator was using slightly different wording...
select_all, deselect_all, de_select_all, select_de_select_all -> select_all_toggle
- selection -> select
- POSE_OT_select_connected -> POSE_OT_select_linked to match other operators
- NODE_OT_delete_selection -> NODE_OT_delete since its not used in other operators
- ANIM_OT_previewrange_define -> ANIM_OT_previewrange_set to match other operators
- NODE_OT_fit_all -> NODE_OT_view_all to match other operators
- View2D_OT_* -> VIEW2D_OT_* to match VIEW3D
- View2D_OT_view_downscroll -> VIEW2D_OT_scroll_down more logical
- removed MARKER_OT_mouseselect_extend and made extend a boolean property of MARKER_OT_mouseselect
- MARKER_OT_mouseselect -> MARKER_OT_select
- GROUP_OT_group_remove -> GROUP_OT_objects_remove more logical since its removing objects from groups
- MESH_OT_removedoublesflag -> MESH_OT_remove_doubles
- redundant words MESH_OT_split_mesh -> MESH_OT_split, OBJECT_OT_object_delete -> OBJECT_OT_delete
renamed selection operator properties
extend_select -> extend
column_select -> column
select_children_only -> children_only
... Since these are all in the context of selection operators there is no need for the extra 'select' in the property name.
Updated docs
http://www.graphicall.org/ftp/ideasman42/html/bpyoperator-module.html
* Made it based on string lookups rather than fixed enum, to make
it extensible by python scripts.
* Context callbacks now also have to specify RNA type when returning
pointers or collections. For non-RNA wrapped data, UnknownType can
be used.
* RNA wrapped context. The WM entries are fixed, for data context
only main and scene are defined properties. Other data entries have
to be dynamically looked up.
* I've added some special code in python for the dynamic context
lookups. Tried to hide it behind RNA but didn't find a clean way to
do it yet. Still unused/untested.
* Also minor fix for warning about propertional edit property in
transform code, and fix for usage of operator poll with checking if
it was NULL.
