A couple of mistakes since the light linking commit:
- The +1 got missed in some of the refactors in the branch
- The order of arguments to the shadow path split was wrong
Pull Request: https://projects.blender.org/blender/blender/pulls/108420
This commit replaces the current Glass approach, where Glass is a virtual closure
that gets replaced with a Glossy and a Refractive closure, with a combined
closure that handles Fresnel after sampling the microfacet. That way, the Fresnel
term is more accurate since it accounts for the microfacet normal, not the
shading normal.
Also updates the BSDF sampling to use a 3D sampler now, since we need two
dimensions to pick the microfacet normal and then a third dimension to pick
reflection/refraction. This can also be used to get rid of the LCG in the
Principled Hair BSDF, which means we can remove it altogether once MultiGGX is
gone.
Also, "sharp" is now supported as a microfacet distribution in OSL, and 2
is supported as the "refract" argument to microfacet() in order to get glass.
To improve mesh upload speeds and reduce the size of the scene data which allows larger scenes to be rendered.
The meshes in Cycles are currently stored as flattened meshes, where each triangle is stored as a set of 3 vertices. Unflattening writes out the vertices in a list according to the index buffer. This uses a lot of memory and for current hardware does not provide a noticeable benefit. This change unflattens the mesh by directly using the meshes vertex and index buffers directly and skips the unflattening. This change allows for larger scenes and also a reduction in the sizes of the meshes. Further it results in a decrease the amount of time it takes to upload the data to a GPU. This is especially important for when multiple GPUs are used in a single machine.
Pull Request #105173
The background evaluation samples the sky discretely, so if the sun is
too small, it can be missed in the evaluation. To solve this, the sun is
ignored during the background evaluation and its contribution is
computed separately.
wi is the viewing direction, and wo is the illumination direction. Under this notation, BSDF sampling always samples from wi and outputs wo, which is consistent with most of the papers and mitsuba. This order is reversed compared with PBRT, although PBRT also traces from the camera.
The first two dimensions of scrambled, shuffled Sobol and shuffled PMJ02 are
equivalent, so this makes no real difference for the first two dimensions.
But Sobol allows us to naturally extend to more dimensions.
Pretabulated Sobol is now always used, and the sampling pattern settings is now
only available as a debug option.
This in turn allows the following two things (also implemented):
* Use proper 3D samples for combined lens + motion blur sampling. This
notably reduces the noise on objects that are simultaneously out-of-focus
and motion blurred.
* Use proper 3D samples for combined light selection + light sampling.
Cycles was already doing something clever here with 2D samples, but using
3D samples is more straightforward and avoids overloading one of the
dimensions.
In the future this will also allow for proper sampling of e.g. volumetric
light sources and other things that may need three or four dimensions.
Differential Revision: https://developer.blender.org/D16443
Uses a light tree to more effectively sample scenes with many lights. This can
significantly reduce noise, at the cost of a somewhat longer render time per
sample.
Light tree sampling is enabled by default. It can be disabled in the Sampling >
Lights panel. Scenes using light clamping or ray visibility tricks may render
different as these are biased techniques that depend on the sampling strategy.
The implementation is currently disabled on AMD HIP. This is planned to be fixed
before the release.
Implementation by Jeffrey Liu, Weizhen Huang, Alaska and Brecht Van Lommel.
Ref T77889
This was not working well in non-trivial scenes before the light tree, and now
it is even harder to make it work well with the light tree. It would average the
with equal weight for every light object regardless of intensity or distance, and
be quite noisy due to not working with multiple importance sampling.
We may restore this if were enough good use cases for the previous implementation,
but let's wait and see what the feedback is.
Some uses cases for this have been replaced by the shadow catcher passes, which
did not exist when this was added.
Ref T77889
Materials now have an enum to set the emission sampling method, to be
either None, Auto, Front, Back or Front & Back. This replace the
previous "Multiple Importance Sample" option.
Auto is the new default, and uses a heuristic to estimate the emitted
light intensity to determine of the mesh should be considered as a light
for sampling. Shaders sometimes have a bit of emission but treating them
as a light source is not worth the memory/performance overhead.
The Front/Back settings are not important yet, but will help when a
light tree is added. In that case setting emission to Front only on
closed meshes can help ignore emission from inside the mesh interior that
does not contribute anything.
Includes contributions by Brecht Van Lommel and Alaska.
Ref T77889
* Split light types into own files, move light type specific code from
light tree and MNEE.
* Move flat light distribution code into own kernel file and host side
building function, in preparation of light tree addition. Add light/sample.h
as main entry point to kernel light sampling.
* Better separate calculation of pdf for selecting a light, and pdf for
sampling a point on the light. The selection pdf is now also stored in
LightSampling for MNEE to correctly recalculate the full pdf when the
shading position changes but the point on the light remains fixed.
* Improvement to kernel light storage, using packed_float3, better variable
names, etc.
Includes contributions by Brecht Van Lommel and Weizhen Huang.
Ref T77889
This adds path guiding features into Cycles by integrating Intel's Open Path
Guiding Library. It can be enabled in the Sampling > Path Guiding panel in the
render properties.
This feature helps reduce noise in scenes where finding a path to light is
difficult for regular path tracing.
The current implementation supports guiding directional sampling decisions on
surfaces, when the material contains a least one diffuse component, and in
volumes with isotropic and anisotropic Henyey-Greenstein phase functions.
On surfaces, the guided sampling decision is proportional to the product of
the incident radiance and the normal-oriented cosine lobe and in volumes it
is proportional to the product of the incident radiance and the phase function.
The incident radiance field of a scene is learned and updated during rendering
after each per-frame rendering iteration/progression.
At the moment, path guiding is only supported by the CPU backend. Support for
GPU backends will be added in future versions of OpenPGL.
Ref T92571
Differential Revision: https://developer.blender.org/D15286
Simplifies code overall to do it inside the eval function, most of the BSDFs
already compute the dot product.
The refactoring in bsdf_principled_hair_eval() was needed to avoid a HIP
compiler bug. Cause is unclear, just changing the implementation enough
is meant to sidestep it.
Ref T92571, D15286
* Return roughness and IOR for BSDF sampling
* Add functions to query IOR and label for given BSDF
* Default IOR to 1.0 instead of 0.0 for BSDFs that don't use it
* Ensure pdf >= 0.0 in case of numerical precision issues
Ref T92571, D15286
The multi-dimensional Sobol pattern required us to carefully use as low
dimensions as possible, as quality goes down in higher dimensions. Now that we
have two sampling patterns that are at least as good, there is no need to keep
it around and the implementation can be simplified.
Differential Revision: https://developer.blender.org/D15788
* Store compact ray differentials in ShaderData and compute full differentials
on demand. This reduces register pressure on the GPU.
* Remove BSDF differential code that was effectively doing nothing as the
differential orientation was discarded when making it compact.
This gives a 1-5% speedup with RTX A6000 + OptiX in our benchmarks, with the
bigger speedups in simpler scenes.
Renders appear to be identical except for the Both displacement option that
does both displacement and bump.
Differential Revision: https://developer.blender.org/D15677
Detect cases where a ray-intersection would miss the current triangle, which if
the intersection is strictly watertight, implies that a neighboring triangle would
incorrectly be hit instead.
When that is detected, apply a ray-offset. The idea being that we only want to
introduce potential error from ray offsets if we really need to.
This work for BVH2 and Embree, as we are able to match the ray-interesction
bit-for-bit, though doing so for Embree requires ugly hacks. Tiny differences
like fused-multiply-add or dot product intrinstics in matrix inversion and ray
intersection needed to be matched exactly, so this is fragile.
Unfortunately we're not able to do the same for OptiX or MetalRT, since those
implementations are unknown (and possibly impossible to match as hardware
instructions). Still artifacts are much reduced, though not eliminated.
Ref T97259
Differential Revision: https://developer.blender.org/D15559
These replace float3 and packed_float3 in various places in the kernel where a
spectral color representation will be used in the future. That representation
will require more than 3 channels and conversion to from/RGB. The kernel code
was refactored to remove the assumption that Spectrum and RGB colors are the
same thing.
There are no functional changes, Spectrum is still a float3 and the conversion
functions are no-ops.
Differential Revision: https://developer.blender.org/D15535
For transparency, volume and light intersection rays, adjust these distances
rather than the ray start position. This way we increment the start distance
by the smallest possible float increment to avoid self intersections, and be
sure it works as the distance compared to be will be exactly the same as
before, due to the ray start position and direction remaining the same.
Fix T98764, T96537, hair ray tracing precision issues.
Differential Revision: https://developer.blender.org/D15455
This patch unifies the names of math functions for different data types and uses
overloading instead. The goal is to make it possible to swap out all the float3
variables containing RGB data with something else, with as few as possible
changes to the code. It's a requirement for future spectral rendering patches.
Differential Revision: https://developer.blender.org/D15276
* Rename "texture" to "data array". This has not used textures for a long time,
there are just global memory arrays now. (On old CUDA GPUs there was a cache
for textures but not global memory, so we used to put all data in textures.)
* For CUDA and HIP, put globals in KernelParams struct like other devices.
* Drop __ prefix for data array names, no possibility for naming conflict now that
these are in a struct.
Move MNEE to own kernel, separate from shader ray-tracing. This does introduce
the limitation that a shader can't use both MNEE and AO/bevel, but that seems
like the better trade-off for now.
We can experiment with bigger kernel organization changes later.
Differential Revision: https://developer.blender.org/D15070
Ensure the correct total/diffuse/transmission depth is set when evaluating
shaders for MNEE, consistent with regular light shader evaluation.
Differential Revision: https://developer.blender.org/D14902
It was wrongly writing passes twice, for both the surface entry and exit points.
We can skip code for filtering closures, emission and holdout also, as these do
nothing with only a subsurface diffuse closure present.
Stumbled over the `integrate_surface_volume_only_bounce` kernel
function not returning the right type. The others too showed up as
warnings when building Cycles as a standalone which didn't have
those warnings disabled.
Differential Revision: https://developer.blender.org/D14558
Light groups are a type of pass that only contains lighting from a subset of light sources.
They are created in the View layer, and light sources (lamps, objects with emissive materials
and/or the environment) can be assigned to a group.
Currently, each light group ends up generating its own version of the Combined pass.
In the future, additional types of passes (e.g. shadowcatcher) might be getting their own
per-lightgroup versions.
The lightgroup creation and assignment is not Cycles-specific, so Eevee or external render
engines could make use of it in the future.
Note that Lightgroups are identified by their name - therefore, the name of the Lightgroup
in the View Layer and the name that's set in an object's settings must match for it to be
included.
Currently, changing a Lightgroup's name does not update objects - this is planned for the
future, along with other features such as denoising for light groups and viewing them in
preview renders.
Original patch by Alex Fuller (@mistaed), with some polishing by Lukas Stockner (@lukasstockner97).
Differential Revision: https://developer.blender.org/D12871
This adds support for selective rendering of caustics in shadows of refractive
objects. Example uses are rendering of underwater caustics and eye caustics.
This is based on "Manifold Next Event Estimation", a method developed for
production rendering. The idea is to selectively enable shadow caustics on a
few objects in the scene where they have a big visual impact, without impacting
render performance for the rest of the scene.
The Shadow Caustic option must be manually enabled on light, caustic receiver
and caster objects. For such light paths, the Filter Glossy option will be
ignored and replaced by sharp caustics.
Currently this method has a various limitations:
* Only caustics in shadows of refractive objects work, which means no caustics
from reflection or caustics that outside shadows. Only up to 4 refractive
caustic bounces are supported.
* Caustic caster objects should have smooth normals.
* Not currently support for Metal GPU rendering.
In the future this method may be extended for more general caustics.
TECHNICAL DETAILS
This code adds manifold next event estimation through refractive surface(s) as a
new sampling technique for direct lighting, i.e. finding the point on the
refractive surface(s) along the path to a light sample, which satisfies Fermat's
principle for a given microfacet normal and the path's end points. This
technique involves walking on the "specular manifold" using a pseudo newton
solver. Such a manifold is defined by the specular constraint matrix from the
manifold exploration framework [2]. For each refractive interface, this
constraint is defined by enforcing that the generalized half-vector projection
onto the interface local tangent plane is null. The newton solver guides the
walk by linearizing the manifold locally before reprojecting the linear solution
onto the refractive surface. See paper [1] for more details about the technique
itself and [3] for the half-vector light transport formulation, from which it is
derived.
[1] Manifold Next Event Estimation
Johannes Hanika, Marc Droske, and Luca Fascione. 2015.
Comput. Graph. Forum 34, 4 (July 2015), 87–97.
https://jo.dreggn.org/home/2015_mnee.pdf
[2] Manifold exploration: a Markov Chain Monte Carlo technique for rendering
scenes with difficult specular transport Wenzel Jakob and Steve Marschner.
2012. ACM Trans. Graph. 31, 4, Article 58 (July 2012), 13 pages.
https://www.cs.cornell.edu/projects/manifolds-sg12/
[3] The Natural-Constraint Representation of the Path Space for Efficient
Light Transport Simulation. Anton S. Kaplanyan, Johannes Hanika, and Carsten
Dachsbacher. 2014. ACM Trans. Graph. 33, 4, Article 102 (July 2014), 13 pages.
https://cg.ivd.kit.edu/english/HSLT.php
The code for this samping technique was inserted at the light sampling stage
(direct lighting). If the walk is successful, it turns off path regularization
using a specialized flag in the path state (PATH_MNEE_SUCCESS). This flag tells
the integrator not to blur the brdf roughness further down the path (in a child
ray created from BSDF sampling). In addition, using a cascading mechanism of
flag values, we cull connections to caustic lights for this and children rays,
which should be resolved through MNEE.
This mechanism also cancels the MIS bsdf counter part at the casutic receiver
depth, in essence leaving MNEE as the only sampling technique from receivers
through refractive casters to caustic lights. This choice might not be optimal
when the light gets large wrt to the receiver, though this is usually not when
you want to use MNEE.
This connection culling strategy removes a fair amount of fireflies, at the cost
of introducing a slight bias. Because of the selective nature of the culling
mechanism, reflective caustics still benefit from the native path
regularization, which further removes fireflies on other surfaces (bouncing
light off casters).
Differential Revision: https://developer.blender.org/D13533
When the light direction is not pointing away from the geometric normal and
there is a shadow terminator offset, self intersection is supposed to occur.
