Resolves#115090, where exceptions from the text editor called
`sys.excepthook` in v3.6 but not in v4.0.
The error was caused by PyC_ExceptionBuffer calling PyErr_Display
instead of PyErr_Print.
While technically a regression in [0], the behavior in 3.6x wasn't
working properly either since a user-defined `sys.excepthook` could
prevent PyC_ExceptionBuffer from accessing the exception text.
Resolve with the following changes:
- BPy_errors_to_report has been updated not to print errors.
Previously BPy_errors_to_report would *sometimes* print the error,
which complicated situations where the caller wanted predictable
behavior (always printing or never printing).
- `PyErr_Print()` must be used to display errors to the output,
this will call `sys.excepthook` as it used to.
It's better not to rely on side effects of BPy_errors_to_report()
for error handling.
[0]: 6a0f98aeef
Design task: #93551
This PR replaces the auto smooth option with a geometry nodes modifier
that sets the sharp edge attribute. This solves a fair number of long-
standing problems related to auto smooth, simplifies the process of
normal computation, and allows Blender to automatically choose between
face, vertex, and face corner normals based on the sharp edge and face
attributes.
Versioning adds a geometry node group to objects with meshes that had
auto-smooth enabled. The modifier can be applied, which also improves
performance.
Auto smooth is now unnecessary to get a combination of sharp and smooth
edges. In general workflows are changed a bit. Separate procedural and
destructive workflows are available. Custom normals can be used
immediately without turning on the removed auto smooth option.
**Procedural**
The node group asset "Smooth by Angle" is the main way to set sharp
normals based on the edge angle. It can be accessed directly in the add
modifier menu. Of course the modifier can be reordered, muted, or
applied like any other, or changed internally like any geometry nodes
modifier.
**Destructive**
Often the sharp edges don't need to be dynamic. This can give better
performance since edge angles don't need to be recalculated. In edit
mode the two operators "Select Sharp Edges" and "Mark Sharp" can be
used. In other modes, the "Shade Smooth by Angle" controls the edge
sharpness directly.
### Breaking API Changes
- `use_auto_smooth` is removed. Face corner normals are now used
automatically if there are mixed smooth vs. not smooth tags. Meshes
now always use custom normals if they exist.
- In Cycles, the lack of the separate auto smooth state makes normals look
triangulated when all faces are shaded smooth.
- `auto_smooth_angle` is removed. Replaced by a modifier (or operator)
controlling the sharp edge attribute. This means the mesh itself
(without an object) doesn't know anything about automatically smoothing
by angle anymore.
- `create_normals_split`, `calc_normals_split`, and `free_normals_split`
are removed, and are replaced by the simpler `Mesh.corner_normals`
collection property. Since it gives access to the normals cache, it
is automatically updated when relevant data changes.
Addons are updated here: https://projects.blender.org/blender/blender-addons/pulls/104609
### Tests
- `geo_node_curves_test_deform_curves_on_surface` has slightly different
results because face corner normals are used instead of interpolated
vertex normals.
- `bf_wavefront_obj_tests` has different export results for one file
which mixed sharp and smooth faces without turning on auto smooth.
- `cycles_mesh_cpu` has one object which is completely flat shaded.
Previously every edge was split before rendering, now it looks triangulated.
Pull Request: https://projects.blender.org/blender/blender/pulls/108014
There are a couple of functions that create rna pointers. For example
`RNA_main_pointer_create` and `RNA_pointer_create`. Currently, those
take an output parameter `r_ptr` as last argument. This patch changes
it so that the functions actually return a` PointerRNA` instead of using
the output parameters.
This has a few benefits:
* Output parameters should only be used when there is an actual benefit.
Otherwise, one should default to returning the value.
* It's simpler to use the API in the large majority of cases (note that this
patch reduces the number of lines of code).
* It allows the `PointerRNA` to be const on the call-site, if that is desired.
No performance regression has been measured in production files.
If one of these functions happened to be called in a hot loop where
there is a regression, the solution should be to use an inline function
there which allows the compiler to optimize it even better.
Pull Request: https://projects.blender.org/blender/blender/pulls/111976
Listing the "Blender Foundation" as copyright holder implied the Blender
Foundation holds copyright to files which may include work from many
developers.
While keeping copyright on headers makes sense for isolated libraries,
Blender's own code may be refactored or moved between files in a way
that makes the per file copyright holders less meaningful.
Copyright references to the "Blender Foundation" have been replaced with
"Blender Authors", with the exception of `./extern/` since these this
contains libraries which are more isolated, any changed to license
headers there can be handled on a case-by-case basis.
Some directories in `./intern/` have also been excluded:
- `./intern/cycles/` it's own `AUTHORS` file is planned.
- `./intern/opensubdiv/`.
An "AUTHORS" file has been added, using the chromium projects authors
file as a template.
Design task: #110784
Ref !110783.
Using ClangBuildAnalyzer on the whole Blender build, it was pointing
out that BLI_math.h is the heaviest "header hub" (i.e. non tiny file
that is included a lot).
However, there's very little (actually zero) source files in Blender
that need "all the math" (base, colors, vectors, matrices,
quaternions, intersection, interpolation, statistics, solvers and
time). A common use case is source files needing just vectors, or
just vectors & matrices, or just colors etc. Actually, 181 files
were including the whole math thing without needing it at all.
This change removes BLI_math.h completely, and instead in all the
places that need it, includes BLI_math_vector.h or BLI_math_color.h
and so on.
Change from that:
- BLI_math_color.h was included 1399 times -> now 408 (took 114.0sec
to parse -> now 36.3sec)
- BLI_simd.h 1403 -> 418 (109.7sec -> 34.9sec).
Full rebuild of Blender (Apple M1, Xcode, RelWithDebInfo) is not
affected much (342sec -> 334sec). Most of benefit would be when
someone's changing BLI_simd.h or BLI_math_color.h or similar files,
that now there's 3x fewer files result in a recompile.
Pull Request #110944
Implements the rest of #101689, after 5e9ea9243b.
- `vdata` -> `vert_data`
- `edata` -> `edge_data`
- `pdata` -> `face_data`
- `ldata` -> `loop_data`
A deeper rename of `loop` to `corner` will be proposed as a next
step, and renaming `totvert` and `totedge` can be done separately.
Pull Request: https://projects.blender.org/blender/blender/pulls/110432
source/blender/freestyle wasn't fillowing Blender's own
conventions for integer types.
This had the down-side of making the code_clean.py utility attempt to
replace `unsigned int` types which always failed.
While this edit could have been manually ignored for all files in
freestyle, add the typedef's to `FreestyleConfig.h` and follow Blender's
convention instead.
Implements part of #101689.
The "poly" name was chosen to distinguish the `MLoop` + `MPoly`
combination from the `MFace` struct it replaced. Those two structures
persisted together for a long time, but nowadays `MPoly` is gone, and
`MFace` is only used in some legacy code like the particle system.
To avoid unnecessarily using a different term, increase consistency
with the UI and with BMesh, and generally make code a bit easier to
read, this commit replaces the `poly` term with `poly`. Most variables
that use the term are renamed too. `Mesh.totface` and `Mesh.fdata` now
have a `_legacy` suffix to reduce confusion. In a next step, `pdata`
can be renamed to `face_data` as well.
Pull Request: https://projects.blender.org/blender/blender/pulls/109819
Doing so avoids having duplicated logic for working with pixel
data which is being passed throughout the render pipeline.
Notable changes:
- ImBug can now store GPU texture.
This is not very finished part of the API, which will be
worked further to support tiling for very-high-res images.
- Implicit sharing is removed from the image buffer, as it is
no longer needed.
There should be no functional changes on user level with this
change.
Ref #108618
Pull Request: https://projects.blender.org/blender/blender/pulls/109788
A lot of files were missing copyright field in the header and
the Blender Foundation contributed to them in a sense of bug
fixing and general maintenance.
This change makes it explicit that those files are at least
partially copyrighted by the Blender Foundation.
Note that this does not make it so the Blender Foundation is
the only holder of the copyright in those files, and developers
who do not have a signed contract with the foundation still
hold the copyright as well.
Another aspect of this change is using SPDX format for the
header. We already used it for the license specification,
and now we state it for the copyright as well, following the
FAQ:
https://reuse.software/faq/
Allows to share buffer data between the render result and image buffers.
The storage of the passes and buffers in the render result have been
wrapped into utility structures, with functions to operate on them.
Currently only image buffers which are sharing buffers with the render
results are using the implicit sharing. This allows proper decoupling of
the image buffers from the lifetime of the underlying render result.
Fixes#107248: Compositor ACCESS VIOLATION when updating datablocks from handlers
Additionally, this lowers the memory usage of multi-layer EXR sequences
by avoiding having two copies of render passes in memory.
It is possible to use implicit sharing in more places, but needs
some API to ensure the render result is the only owner of data before
writing to its pixels.
Pull Request: https://projects.blender.org/blender/blender/pulls/108045
The goal is to make it more explicit and centralized operation to
assign and steal buffer data, with proper ownership tracking.
The buffers and ownership flags are wrapped into their dedicated
structures now.
There should be no functional changes currently, it is a preparation
for allowing implicit sharing of the ImBuf buffers. Additionally, in
the future it is possible to more buffer-specific information (such
as color space) next to the buffer data itself. It is also possible
to clean up the allocation flags (IB_rect, ...) to give them more
clear naming and not have stored in the ImBuf->flags as they are only
needed for allocation.
The most dangerous part of this change is the change of byte buffer
data from `int*` to `uint8_t*`. In a lot of cases the byte buffer was
cast to `uchar*`, so those casts are now gone. But some code is
operating on `int*` so now there are casts in there. In practice this
should be fine, since we only support 64bit platforms, so allocations
are aligned. The real things to watch out for here is the fact that
allocation and offsetting from the byte buffer now need an explicit 4
channel multiplier.
Once everything is C++ it will be possible to simplify public
functions even further.
Pull Request: https://projects.blender.org/blender/blender/pulls/107609
See: https://projects.blender.org/blender/blender/issues/103343
Changes:
1. Added `BKE_node.hh` file. New file includes old one.
2. Functions moved to new file. Redundant `(void)`, `struct` are removed.
3. All cpp includes replaced from `.h` on `.hh`.
4. Everything in `BKE_node.hh` is on `blender::bke` namespace.
5. All implementation functions moved in namespace.
6. Function names (`BKE_node_*`) changed to `blender::bke::node_*`.
7. `eNodeSizePreset` now is a class, with renamed items.
Pull Request: https://projects.blender.org/blender/blender/pulls/107790
