Using the new HIP SDK 5.5 that includes a fix for the compiler bug.
This also enables the light tree.
For Linux the binaries are still disabled. ROCm 5.5 is planned to
include the same fix but not released yet. When that happens we
should be able to enable Linux as well.
Ref #104786Fix#104085
Pull Request: https://projects.blender.org/blender/blender/pulls/107098
Updated Embree 4 library with GPU support is required for it to be
compiled - compatiblity with Embree 3 and Embree 4 without GPU support
is maintained.
Enabling hardware raytracing is an opt-in user setting for now.
Pull Request: https://projects.blender.org/blender/blender/pulls/106266
This reverts commit df096eab77.
There is a corner case for when WITH_CYCLES_ONEAPI_BINARIES is set to on
and later turned off during config, in case there is no ocloc.
Due to floating point differences between importance sampling and
texture evaluation, disagreeing on whether or not a ray lies within
the sun disc.
* Use the same input values for geographical_to_direction() in
sky_radiance_nishita() and kernel_data.background.sun.
* The mathematical operations in pdf_uniform_cone() were adjusted to
match sky_radiance_nishita().
Pull Request: https://projects.blender.org/blender/blender/pulls/106764
Implements #95966, as the final step of #95965.
This commit changes the storage of mesh edge vertex indices from the
`MEdge` type to the generic `int2` attribute type. This follows the
general design for geometry and the attribute system, where the data
storage type and the usage semantics are separated.
The main benefit of the change is reduced memory usage-- the
requirements of storing mesh edges is reduced by 1/3. For example,
this saves 8MB on a 1 million vertex grid. This also gives performance
benefits to any memory-bound mesh processing algorithm that uses edges.
Another benefit is that all of the edge's vertex indices are
contiguous. In a few cases, it's helpful to process all of them as
`Span<int>` rather than `Span<int2>`. Similarly, the type is more
likely to match a generic format used by a library, or code that
shouldn't know about specific Blender `Mesh` types.
Various Notes:
- The `.edge_verts` name is used to reflect a mapping between domains,
similar to `.corner_verts`, etc. The period means that it the data
shouldn't change arbitrarily by the user or procedural operations.
- `edge[0]` is now used instead of `edge.v1`
- Signed integers are used instead of unsigned to reduce the mixing
of signed-ness, which can be error prone.
- All of the previously used core mesh data types (`MVert`, `MEdge`,
`MLoop`, `MPoly` are now deprecated. Only generic types are used).
- The `vec2i` DNA type is used in the few C files where necessary.
Pull Request: https://projects.blender.org/blender/blender/pulls/106638
This type will be used to store mesh edges in #106638, but it could
be used for anything else too. This commit adds support for:
- The new type in the Python API
- Editing the type in the edit mode "Attribute Set" operator
- Rendering the type in EEVEE and Cycles for all geometry types
- Geometry nodes attribute interpolation and mixing
- Viewing the type in the spreadsheet and using row filters
The attribute uses the `blender::int2` type in most code, and
the `vec2i` DNA type in C code when necessary. The enum names
are based on `INT32_2D` for consistency with `INT8` and `INT32`.
Pull Request: https://projects.blender.org/blender/blender/pulls/106677
The OSL GPU services implementation of noise intrinsics was missing the
overloads for derivatives and therefore OptiX pipeline creation would fail if
those were referenced.
When WITH_CYCLES_DEBUG is set to ON the following errors are
printed to the console:
E0412 15:51:22.588564 7996345 sync.cpp:737] Unknown pass Guiding Color
E0412 15:51:22.588605 7996345 sync.cpp:737] Unknown pass Guiding Probability
E0412 15:51:22.588613 7996345 sync.cpp:737] Unknown pass Guiding Average Roughness
This change fixes this by treating the guiding passes the same
way as all other passes, solving the errors and making it possible
to visualize guiding passes in the viewport later on.
Pull Request: https://projects.blender.org/blender/blender/pulls/106863
- "Lens" can be a transparent object used in cameras, or specifically
its property of focal length
- "Empty" can be an adjective meaning void, or an object type. The
latter is already disambiguated using `ID_ID`
- "New" and "Old" are adjectives that can have agreements in some
languages
- "Modified" is an adjective that can have agreement in some languages
- "Clipping" can be a property of a camera, or a behavior of the
mirror modifier
- "Value" in HSV nodes, see #105113
- "Area" in the Face Area geometry node, can mean a measurement or a
window type
- "New" is an adjective that can have agreement
- "Tab" can be a UI element or a whitespace character
- "Volume" can mean a measurement or an object type. The latter is
already disambiguated using `ID_ID`
These changes introduce the new `BLT_I18NCONTEXT_TIME` translation
context.
They also remove `BLT_I18NCONTEXT_VIRTUAL_REALITY`, which I added at
one point but then couldn't find which messages I wanted to fix with
it.
Ref #43295
Pull Request: #106718
It was that names of related "combo" operations
like Hue/Saturation/Value, *Dilate/Erode*
and Brightness/Contrast should be separated
by slashes in their names.
This patch changes this for the multiple nodes
and operators concerning Hue/Saturation/Value
across Blender.
Note1: This patch should only touch UI names
which do not need versioning and should not
break scripts.
Note2: This breaks first letter fuzzy search
for "hsv". It was noted by @HooglyBoogly that
the "/" character needs to be added to the
fuzzy search split list. Note however that such
search is already broken in Main for nodes like
Brightness/Contrast and Dilate/Erode which
already use slash separators
Pull Request: https://projects.blender.org/blender/blender/pulls/106721
Similar to 8d0920ec6d and aef0e72e5a.
In a test case with 2 million curves and 15 million points
I observed a 10x performance improvement, from 2.2s to 0.2s
to copy the data from Blender to Cycles.
Similar to 8d0920ec6d.
In a test case with 8 million points and 3 attributes, I observed
around a 9x performance improvement, from 1.8s to 0.2s to copy
the data from Blender to Cycles. For some attribute types, using
implicit sharing could remove the need to copy entirely, but removing
the overhead from the RNA API makes sense anyway.
Only use the denoised buffer for access of denoised passes, and
access the rest of the passes from the original render buffer.
This allows in-place modification of the guiding passes needed
by the denoiser without affecting the final render result pixels.
Pull Request: https://projects.blender.org/blender/blender/pulls/106668
Barycentric coordinate convention was changed at some point, which is
reflected in `motion_triangle_shader.h` (1c2c468abc) but not in
`motion_triangle.h`, this is also fixed by sharing functions between the
two header files.
Pull Request: https://projects.blender.org/blender/blender/pulls/106629
Similar to 4bcd59d644. This probably got worse recently with
the generic attribute refactors for `Mesh`, but the final performance is
probably much better than older versions too.
Timings extracting attributes from a 16 million vertex grid (seconds):
- Corner float attribute: 0.72 -> 0.19
- Face float attribute: 0.60 -> 0.07
- UV map: 3.18 -> 0.05
Implements #95967.
Currently the `MPoly` struct is 12 bytes, and stores the index of a
face's first corner and the number of corners/verts/edges. Polygons
and corners are always created in order by Blender, meaning each
face's corners will be after the previous face's corners. We can take
advantage of this fact and eliminate the redundancy in mesh face
storage by only storing a single integer corner offset for each face.
The size of the face is then encoded by the offset of the next face.
The size of a single integer is 4 bytes, so this reduces memory
usage by 3 times.
The same method is used for `CurvesGeometry`, so Blender already has
an abstraction to simplify using these offsets called `OffsetIndices`.
This class is used to easily retrieve a range of corner indices for
each face. This also gives the opportunity for sharing some logic with
curves.
Another benefit of the change is that the offsets and sizes stored in
`MPoly` can no longer disagree with each other. Storing faces in the
order of their corners can simplify some code too.
Face/polygon variables now use the `IndexRange` type, which comes with
quite a few utilities that can simplify code.
Some:
- The offset integer array has to be one longer than the face count to
avoid a branch for every face, which means the data is no longer part
of the mesh's `CustomData`.
- We lose the ability to "reference" an original mesh's offset array
until more reusable CoW from #104478 is committed. That will be added
in a separate commit.
- Since they aren't part of `CustomData`, poly offsets often have to be
copied manually.
- To simplify using `OffsetIndices` in many places, some functions and
structs in headers were moved to only compile in C++.
- All meshes created by Blender use the same order for faces and face
corners, but just in case, meshes with mismatched order are fixed by
versioning code.
- `MeshPolygon.totloop` is no longer editable in RNA. This API break is
necessary here unfortunately. It should be worth it in 3.6, since
that's the best way to allow loading meshes from 4.0, which is
important for an LTS version.
Pull Request: https://projects.blender.org/blender/blender/pulls/105938
This patch refactors the texture samples code by mainly splitting the
eGPUSamplerState enum into multiple smaller enums and packing them
inside a GPUSamplerState struct. This was done because many members of
the enum were mutually exclusive, which was worked around during setting
up the samplers in the various backends, and additionally made the API
confusing, like the GPU_texture_wrap_mode function, which had two
mutually exclusive parameters.
The new structure also improved and clarified the backend sampler cache,
reducing the cache size from 514 samplers to just 130 samplers, which
also slightly improved the initialization time. Further, the
GPU_SAMPLER_MAX signal value was naturally incorporated into the
structure using the GPU_SAMPLER_STATE_TYPE_INTERNAL type.
The only expected functional change is in the realtime compositor, which
now supports per-axis repetition control, utilizing new API functions
for that purpose.
This patch is loosely based on an older patch D14366 by Ethan Hall.
Pull Request: https://projects.blender.org/blender/blender/pulls/105642
