Is lazily-initialized array owned by the SubdivCCG. Allows to access
index of a first grid of a given face in the flat array of grids.
Currently unused, but is needed for multires bake.
Since rB47f98a38d0f8 not all 3 effect inputs were assigned anymore. Their
ImBuf's rect was accessed though in do_glow_effect (even though unused in
the following dedicated functions).
Just pass NULL here instead.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D8064
This patch implements the list panel system D7490 for grease pencil
shader effects. It also moves their drawing to a callback in
ShaderFxTypeInfo in line with the extensible architecture refactoring
goal T75724.
The implementation is basically exactly the same as for the modifier
patch (9b099c8612).
Thanks to Matias Mendiola (@mendio) for helping to develop the layout
changes.
Differential Revision: https://developer.blender.org/D7985
This patch implements the list panel system D7490 for grease pencil
modifiers. It also moves their drawing to a callback in
GpencilModifierTypeInfo in line with the extensible architecture
refactoring goal T75724.
This also adds the "set_error" function for grease pencil modifiers,
which hadn't been copied from mesh modifiers yet.
The implementation is basically exactly the same as for the modifier
patch (9b099c8612).
Thanks to Matias Mendiola (mendio) for providing mockups for many
of the layout changes.
Differential Revision: https://developer.blender.org/D7978
This patch implements the list panel system D7490 for constraints.
In this case the panels are still defined in Python.
The layouts are also updated to use subpanels and the a more organized
single column layout. There may be more tweaks necessary for the
layouts.
Reviewed By: Severin, billreynish, Mets
Differential Revision: https://developer.blender.org/D7499
This will not give any noticeable improvements in common editing tasks,
since then usually only a very few IDs are changed and checked for
override updates.
However, it makes full override diffing process several times faster
(happens usually when saving a .blend file, but could also help e.g.
when multi-editing several override objects at the same time...).
Currently all force effectors can only act on cloth when the force is
perpendicular to the surface. This makes sense for wind, but not for
other forces; and the user may want even wind to have some friction.
This changes effector code to output two force vectors - although
you of course can pass the same pointer for both. The force is split
between the two outputs based on a new per-effector setting.
Differential Revision: https://developer.blender.org/D8017
The reason was the datablock is changed but it was not tagged for depsgraph refresh.
In some cases it could be possible to tag several times the same datablock, but as this is not the case all the times and the number of tags is always very small, it doesn't worth a complex code to keep a memory list of the datablocks to tag.
This removes G_FILE_HISTORY, G_FILE_SAVE_COPY & G_FILE_USERPREFS.
Using file-flags made logic harder to follow since it's not so clear
which flags are expected to be in G.fileflags & which are meant to be
set and passed as arguments, these are shared between read & write
functions too.
Add BlendFileWriteParams so options which don't need to be stored
aren't mixed up with flags that are stored for reuse.
By using own path construction instead of handy printf-like functions,
we get a 10% improvement on overall diffing process!
This remains way to slow on some complex production characters, but
always good to have still.
Use a median center of polygons as an initial value for volume center
calculation since the volume accumulation quickly generates very large
numbers that become inaccurate if the geometry is too far
from it's current center.
When "Relative Remap" option was added, the intention was only to remap
paths that were already relative. However it remapped all paths.
This was reported as T62612 and fixed recently,
however some Python script authors depended on the old behavior.
For users, it's reasonable to use the existing operators to make paths
absolute/relative. For scripts however it's useful to be able to write
out individual data-blocks with the ability to make all paths relative.
Now `bpy.data.libraries.write()` takes a path_remap argument which can
be `NONE/RELATIVE/RELATIVE_ALL/ABSOLUTE` allowing the script author to
choose how paths are handled when writing out data-blocks.
Addresses T77768.
Remove goto statement from `seq_render_image_strip()` and `seq_render_movie_strip()`.
`seq_render_image_strip_view()` and `seq_render_movie_strip_view()` is used to render individual views in both monoview and multiview branch.
I have included `seq_can_use_proxy()` for convinience
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D7870
Partialy fixes T73828
Currently all 3 effect inputs were assigned even if not all 3 were used.
This causes problems with reassigning effects in python, because 3rd input is
not accessible.
This patch will only assign inputs that are necessary for effect to work
properly.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D6868
Now that we have a uniform consistent behavior in all our ID duplicate
funtions, we can easily factorize it greatly. Code gets cleaner,
smaller, and less error-prone.
Note that ultimately, this duplicate/deep copy behavior could be added
as a callback of IDTypeInfo.
We could also rethink the duplicate flags (some data, even some obdata,
like Lattice, are not coverred currently).
And so on. But at least code should now be much more easily maintainable
and extendable.
Previously, object (and sub-data) actions would be controlled by the
user preferences flag, collections actions would never be duplicted, and
scenes actions were always duplicated...
Now they all follow the user preferences settings.
Main change from user side, besides that all pointers should now be
properly remapped to new IDs, is that linked objects are no longer
preserved when doing a full copy of scenes.
Will open a task to check whether we actually still want that behavior
(and re-code it in a more correct way then).
This is the main part of work done here, it aims at uniformizing and
sanitizing that 'deep copy' process for supported IDs (currently scenes,
collections and objects).
Note that there will be more follow up commits after that one, but this
should be the most risky and changing one.
Using enum type itself in implementations, and uint in headers (as using
enums types in headers is a pain when enum are not defined and used in a
single same header file...).
It makes no sense to deep-copy a collection and not also copy its
children collections... Parameter was not used anymore anyway.
So now this duplicate function will always at least deep-duplicate all
of its children collections, recursively.
We want to get rid of those for all ID types ultimately, but that one
was only used in one place, being the only one calling
`BKE_collection_duplicate` without hierarchical duplicate and parent
collection pointer, effectively using the full power of the complex deep
duplication code for a mere `BKE_id_copy` call...
This will allow for further cleanup in duplicate code.
This patch adds two options:
- Convert a mesh to grease pencil strokes.
- Bake the mesh animation into grease pencil strokes.
Both are related and must be included in the same patch.
Related to tasks: T77629 and T77630
Notice: The conversion is done for mesh edges and it's not considering any visibility clipping. All edges are exported, no matters if it's visible or not.
Example of Convert a Mesh to Grease Pencil strokes:
{F8606028}
This conversion was inspired by the technique used by @luamono in this tweet: https://twitter.com/luamono/status/1239983662176841730
Example of Bake Animation (the video is a little outdate, but the basic functionality is the same, only small changes in UI):
{F8606032}
Reviewed By: mendio, pepeland
Maniphest Tasks: T77629, T77630
Differential Revision: https://developer.blender.org/D7983
Now that `BKE_main_collections_parent_relations_rebuild()` is called
from readfile code, we need to make it resilient to potential NULL
master collection pointer in scenes.
This is actually a nice issue due to too much optimization...
* Making an ID local just reuse the linked one whenever possible, instead of
actually making a copy of it.
* Therefore, the collection containing that ID is seen as unchanged, since
the pointer itself remained the same.
* But on undo step, there is no way to reuse that local object, which then
gets deleted, and linked one gets re-created - at a different address.
* Collection, however, since unchanged, is not updated at all and thus keeps
reference to the to-be-deleted local object, instead of the linked one.
* Issue gets even worse with viewlayers, this leads to the crash.
To address this, this patch adds a 'virtual' update flags that does nothing
in update case, but will ensure that the affected IDs using the one made local
are properly detected as changed across the relevant undo step.
Note that the recalc flags were chosen mostly for a logical reason, and also
because they are already properly dealt with and cleared by undo code,
so this looks like the optimal solution.
Reviewed By: brecht
Maniphest Tasks: T77774
Differential Revision: https://developer.blender.org/D8006
- BKE_lattice_deform_data_create was init_latt_deform.
- BKE_lattice_deform_data_destroy was end_latt_deform.
- BKE_lattice_deform_data_eval_co was calc_latt_deform.
This is an improvement over 2.7x which converted edit-mesh to mesh
(CDDM) for all 3 modifiers.
Overall this increases performance in edit-mode by around 15-20%.
