- set_frame() --> frame_set()
- set_context_pointer() --> context_pointer_set()
material adding works for curves and metaballs, new function to remove materials.
materials.link() didnt well fit how this is used elsewhere
- order matters
- it can be linked more than once.
- remove(material), isnt that useful since you need to manage indicies.
... use list style functions instead. materials.append(mat) / materials.pop(index)
- if a group has one or more objects in it, it gets a refcount of 1 on load (unchanged from before)
- dupli-groups, and materials no longer add/remove a reference.
- now groups are only freed when they contain no objects or when manually unlinked.
- BGE Shader.setSampler(name, index): index range check was wrong.
- Compositor check for an invalid channel was incorrect.
- getting the center of selected verts used an uninitalized z axis.
- do_init_render_material() used && rather then & when testing for MA_TRANSP.
- weight paint activate flipped bone used && rather then & for flag checking.
Ambient occlusion: multiplied with direct lighting by default, add
is also still available and more blending methods might be added if
they are useful. This is fundamentally a non physical effect.
Environment lighting: always added as you would expect (though you can
subtract by specifying negative energy). This can be just white or take
colors or textures from the world.
Indirect lighting: only supported for AAO at the moment (and is still
too approximate), and also is always added. A factor is available to
specify how much is added, though value 1.0 is correct.
Also:
* Material ambient value now defaults to 1.0.
* Added Environment, Indirect and Emit pass.
* "Both" blending method is no longer available.
* Attenuation, sampling parameters are still shared, some could be split
up, though if they are different this would affect performance.
Also: Changed 'Spread' value to be proportional to the light cache voxel grid
(i.e. 0.5 spreads half the width of the grid), so that it's independent of light
cache resolution. This means that results should be similar as you increase/
decrease resolution.
* Convert all code to use new functions.
* Branch maintainers may want to skip this commit, and run this
conversion script instead, if they use a lot of math functions
in new code:
http://www.pasteall.org/9052/python
Volumes can now receive shadows from external objects, either raytraced shadows or shadow maps.
To use external shadows, enable 'external shadows' in volume material 'lighting' panel. This an extra toggle since it causes a performance hit, but this can probably be revisited/optimised when the new raytrace accelerator is integrated. For shadow maps at least, it's still very quick.
Renamed 'scattering mode' to 'lighting mode' (a bit simpler to understand), and the options inside. Now there's:
- Shadeless
takes light contribution, but without shadowing or self-shading (fast)
good for fog-like volumes, such as mist, or underwater effects
- Shadowed (new)
takes light contribution with shadows, but no self-shading. (medium)
good for mist etc. with directional light sources
eg. http://vimeo.com/6901636
- Shaded
takes light contribution with internal/external shadows, and self shading (slower)
good for thicker/textured volumes like smoke
- Multiple scattering etc (still doesn't work properly, on the todo).
After code review and experimentation, this commit makes some changes to the way that volumes are shaded. Previously, there were problems with the 'scattering' component, in that it wasn't physically correct - it didn't conserve energy and was just acting as a brightness multiplier. This has been changed to be more correct, so that as the light is scattered out of the volume, there is less remaining to penetrate through.
Since this behaviour is very similar to absorption but more useful, absorption has been removed and has been replaced by a 'transmission colour' - controlling the colour of light penetrating through the volume after it has been scattered/absorbed. As well as this, there's now 'reflection', a non-physically correct RGB multiplier for out-scattered light. This is handy for tweaking the overall colour of the volume, without having to worry about wavelength dependent absorption, and its effects on transmitted light. Now at least, even though there is the ability to tweak things non-physically, volume shading is physically based by default, and has a better combination of correctness and ease of use.
There's more detailed information and example images here:
http://wiki.blender.org/index.php/User:Broken/VolumeRendering
Also did some tweaks/optimisation:
* Removed shading step size (was a bit annoying, if it comes back, it will be in a different form)
* Removed phase function options, now just one asymmetry slider controls the range between back-scattering, isotropic scattering, and forward scattering. (note, more extreme values gives artifacts with light cache, will fix...)
* Disabled the extra 'bounce lights' from the preview render for volumes, speeds updates significantly
* Enabled voxeldata texture in preview render
* Fixed volume shadows (they were too dark, fixed by avoiding using the shadfac/AddAlphaLight stuff)
More revisions to come later...
#19345: can't get out of grayed out pointer field.
#19342: item_pointerR fields can't be cleared with one item.
#19341: fix hanging tooltips when manipulating regions.
#19339: context panel still allowed tabbing, but it has no header.
#19334: editing SSS settings crashed previewrender.
#19330: object mode could not be switched on from the header menu.
* data reorganisation - uses own values now instead of reusing surface material properties (i.e. an individual density value, rather than reusing alpha) Files saved with the old system won't load up the same after this.
* improved defaults and ui
* Transparency is now it's own panel, with a boolean toggle
+ enum for z/ray transparency (following mockup made by
William). Also had to change DNA flags for this.
* Disabled radiosity a bit more in render engine, it still had
some effects like auto autosmooth.
* Make some sliders in material buttons percentages in RNA.
* Some other small tweaks in layout and naming.
Integration is still very rough around the edges and WIP, but it works, and can render smoke (using new Smoke format in Voxel Data texture) --> http://vimeo.com/6030983
More to come, but this makes things much easier to work on for me :)
Patch by Alfredo de Greef. Considerably improves the quality of bump
mapping, and texture filtering for displacement and warp too. Mainly
this is achieved by getting the texture derivatives just right in
various cases, many thanks to Alfredo for figuring this one out, works
great.
This is enabled by default now, but disabled still for existing
textures to preserve backwards compatibility. Can be enabled with
the "New Bump" option in the material texture slot in the outliner.
Also, I made the range for the normal factor a bit smaller since this
gives stronger effects, but note that you can still type in larger
values than the slider allows.
* Some changes to make lamp and world textures editing work.
You may have to click on another texture slot once before
being able to add a texture, and the layout is messy. Added
this so lightenv project isn't blocked by this being missing.
* Adding a new material slot now doesn't create a new material
anymore, to avoid creating unused materials.
* Tiny changes to scene/object buttons.
* Objects now support up to 32767 material slots. It's easy to
increase this further, but I prefer not to increase the memory
usage of mesh faces, it seems unlikely that someone would
create 32767 distinct materials?
* Forward compatibility: the only thing you can potentially lose
reading a 2.5 file in 2.4 is object linking (instead of default
data), though usually that will go fine too. Reading files with
> 32 material slots in 2.4 can start giving issues.
* The ob->colbits variable is deprecated by the array ob->matbits
but I didn't remove the ob->colbits updates in very few places
it is set.
* I hope I changed all the relevant things, various places just
hardcoded the number 16 instead of using the MAXMAT define.
* Join Objects operator back. This is using the version from the
animsys2 branch coded by Joshua, which means it now supports
joining of shape keys.
* Fix for crash reading file saved during render.
* Removed nAction struct. We'll be using good ol' bAction structs again, but putting new data in a different list. Apart from that, the data is similar enough to do so.
* Rearranged code in DNA_action_types.h while renaming the structs to avoid confusion over what is currently in use...
* Added freeing and AnimData execution loops for many other ID-types too. (NOTE: I've added AnimData in NodeTree struct too, but it's not clear to me where the relevant data-management calls should go in Nodes code).
* File writing code should now only write the new data to files
Finally, here is the basic (functional) prototype of the new animation system which will allow for the infamous "everything is animatable", and which also addresses several of the more serious shortcomings of the old system. Unfortunately, this will break old animation files (especially right now, as I haven't written the version patching code yet), however, this is for the future.
Highlights of the new system:
* Scrapped IPO-Curves/IPO/(Action+Constraint-Channels)/Action system, and replaced it with F-Curve/Action.
- F-Curves (animators from other packages will feel at home with this name) replace IPO-Curves.
- The 'new' Actions, act as the containers for F-Curves, so that they can be reused. They are therefore more akin to the old 'IPO' blocks, except they do not have the blocktype restriction, so you can store materials/texture/geometry F-Curves in the same Action as Object transforms, etc.
* F-Curves use RNA-paths for Data Access, hence allowing "every" (where sensible/editable that is) user-accessible setting from RNA to be animated.
* Drivers are no longer mixed with Animation Data, so rigs will not be that easily broken and several dependency problems can be eliminated. (NOTE: drivers haven't been hooked up yet, but the code is in place)
* F-Curve modifier system allows useful 'large-scale' manipulation of F-Curve values, including (I've only included implemented ones here): envelope deform (similar to lattices to allow broad-scale reshaping of curves), curve generator (polynomial or py-expression), cycles (replacing the old cyclic extrapolation modes, giving more control over this). (NOTE: currently this cannot be tested, as there's not access to them, but the code is all in place)
* NLA system with 'tracks' (i.e. layers), and multiple strips per track. (NOTE: NLA system is not yet functional, as it's only partially coded still)
There are more nice things that I will be preparing some nice docs for soon, but for now, check for more details:
http://lists.blender.org/pipermail/bf-taskforce25/2009-January/000260.html
So, what currently works:
* I've implemented two basic operators for the 3D-view only to Insert and Delete Keyframes. These are tempolary ones only that will be replaced in due course with 'proper' code.
* Object Loc/Rot/Scale can be keyframed. Also, the colour of the 'active' material (Note: this should really be for nth material instead, but that doesn't work yet in RNA) can also be keyframed into the same datablock.
* Standard animation refresh (i.e. animation resulting from NLA and Action evaluation) is now done completely separate from drivers before anything else is done after a frame change. Drivers are handled after this in a separate pass, as dictated by depsgraph flags, etc.
Notes:
* Drivers haven't been hooked up yet
* Only objects and data directly linked to objects can be animated.
* Depsgraph will need further tweaks. Currently, I've only made sure that it will update some things in the most basic cases (i.e. frame change).
* Animation Editors are currently broken (in terms of editing stuff). This will be my next target (priority to get Dopesheet working first, then F-Curve editor - i.e. old IPO Editor)
* I've had to put in large chunks of XXX sandboxing for old animation system code all around the place. This will be cleaned up in due course, as some places need special review.
In particular, the particles and sequencer code have far too many manual calls to calculate + flush animation info, which is really bad (this is a 'please explain yourselves' call to Physics coders!).
Think global, act local!
The old favorite G.scene gone! Man... that took almost 2 days.
Also removed G.curscreen and G.edbo.
Not everything could get solved; here's some notes.
- modifiers now store current scene in ModifierData. This is not
meant for permanent, but it can probably stick there until we
cleaned the anim system and depsgraph to cope better with
timing issues.
- Game engine G.scene should become an argument for staring it.
Didn't solve this yet.
- Texture nodes should get scene cfra, but the current implementation
is too tightly wrapped to do it easily.
From the anti-globalization department:
G.obedit terminated!
Wherever possible, use CTX_data_edit_object(C) to get this
now. It's stored in scene now, and the screen context has
it defined.
svn merge https://svn.blender.org/svnroot/bf-blender/trunk/blender -r12987:17416
Issues:
* GHOST/X11 had conflicting changes. Some code was added in 2.5, which was
later added in trunk also, but reverted partially, specifically revision
16683. I have left out this reversion in the 2.5 branch since I think it is
needed there.
http://projects.blender.org/plugins/scmsvn/viewcvs.php?view=rev&root=bf-blender&revision=16683
* Scons had various conflicting changes, I decided to go with trunk version
for everything except priorities and some library renaming.
* In creator.c, there were various fixes and fixes for fixes related to the -w
-W and -p options. In 2.5 -w and -W is not coded yet, and -p is done
differently. Since this is changed so much, and I don't think those fixes
would be needed in 2.5, I've left them out.
* Also in creator.c: there was code for a python bugfix where the screen was not
initialized when running with -P. The code that initializes the screen there
I had to disable, that can't work in 2.5 anymore but left it commented as a
reminder.
Further I had to disable some new function calls. using src/ and python/, as
was done already in this branch, disabled function calls:
* bpath.c: error reporting
* BME_conversions.c: editmesh conversion functions.
* SHD_dynamic: disabled almost completely, there is no python/.
* KX_PythonInit.cpp and Ketsji/ build files: Mathutils is not there, disabled.
* text.c: clipboard copy call.
* object.c: OB_SUPPORT_MATERIAL.
* DerivedMesh.c and subsurf_ccg, stipple_quarttone.
Still to be done:
* Go over files and functions that were moved to a different location but could
still use changes that were done in trunk.
Robin (Frrr) Allen did a decent job on this, so we can also welcome him
as a member in the svn committers team to maintain it!
I do the first commit with some minor fixes:
- get Makefiles work
- fix rounding issue with tiles on unit faces
- removed UI includes from tex node
A nice doc in wiki is here:
http://wiki.blender.org/index.php/User:Frr/TexnodeManual
On the todo for Robin is:
- When using one or more Texture-input nodes, you cannot edit them by activating
(as works now for Material nodes).
- The new "output node" option fails on the default case, when only one
output node is active. It then shows often a blank menu. Will get fixed asap.
- When using a NodeTree-Texture as input node, the menu for 'active output'
should not show. NodeTree should ignore other nodetrees to keep things sane
for now.
- On a future todo is proper usage of "Dxt" and "Dyt" texture vectors for
superior antialising of checkers/bricks.
General note; I know people are dying to get a full integrated shader system
with nodes. In theory we could merge this with Material Nodetrees... but I
rather wait for a solid and very well thought out design proposal for this,
also including design ideas for unifying with a shader language (GPU, CPU).
For the time being this is a nice extension of current textures. :)
