This means the shader can now be used for procedural texturing. New
settings on the node are Samples, Inside, Local Only and Distance.
Original patch by Lukas with further changes by Brecht.
Differential Revision: https://developer.blender.org/D3479
I've limited it to just the RGB<->XYZ stuff for now, correct image handling is the next step.
Reviewers: brecht, sergey
Differential Revision: https://developer.blender.org/D3478
The automatic mode checks all Enviroment Texture nodes and picks the largest image's resolution.
If there are no Enviroment Textures, it just uses the old default.
Also, the sampling map now isn't limited to square shapes. The automatic detection uses the exact image size,
the manual UI option now halves the value to get the height.
A default aspect ratio of 2:1 makes sense since this is what most HDRIs use.
Reviewers: brecht, sergey
Differential Revision: https://developer.blender.org/D3477
There is one legit place in the code where memcpy was used as an
optimization trick. Was needed for older version of GCC, but now
it should be re-evaluated and checked if it still helps to have
that trick.
In other places it's somewhat lazy programming to zero out all
object members. That is absolutely unsafe, at the moment when
less trivial class is used as a member in that object things
will break.
Other cases were using memcpy into an object which comes from
an external library. We don't control that object, and we can
not guarantee it will always be safe for such memory tricks
and debugging bugs caused by such low level access is far fun.
Ideally we need to use more proper C++, but needs to be done with
big care, including benchmarks of each change, For now do
annoying but simple cast to void*.
Not sure why exactly it is called a cleanup, the code was much more clear
and robust against possible missing return statements which are MANDATORY.
Missing return statement will:
- Cause two different BVH traversals to be run.
Not is happening currently, but if more BVH layouts are added, it will
become a problem.
- It is already causing assert() statements to fail, since functions are
no longer returning when they are supposed to.
If there is any measurable reason to keep this change, let me know.
Otherwise just stick to reliable/tested/robust code.
This reverts commit ba65f7093b.
This commit contains the minimum to make clang build/work with blender, asan and ninja build support is forthcoming
Things to note:
1) Builds and runs, and is able to pass all tests (except for the freestyle_stroke_material.blend test which was broken at that time for all platforms by the looks of it)
2) It's slightly faster than msvc when using cycles. (time in seconds, on an i7-3370)
victor_cpu
msvc:3099.51
clang:2796.43
pavillon_barcelona_cpu
msvc:1872.05
clang:1827.72
koro_cpu
msvc:1097.58
clang:1006.51
fishy_cat_cpu
msvc:815.37
clang:722.2
classroom_cpu
msvc:1705.39
clang:1575.43
bmw27_cpu
msvc:552.38
clang:561.53
barbershop_interior_cpu
msvc:2134.93
clang:1922.33
3) clang on windows uses a drop in replacement for the Microsoft cl.exe (takes some of the Microsoft parameters, but not all, and takes some of the clang parameters but not all) and uses ms headers + libraries + linker, so you still need visual studio installed and will use our existing vc14 svn libs.
4) X64 only currently, X86 builds but crashes on startup.
5) Tested with llvm/clang 6.0.0
6) Requires visual studio integration, available at https://github.com/LazyDodo/llvm-vs2017-integration
7) The Microsoft compiler spawns a few copies of cl in parallel to get faster build times, clang doesn't, so the build time is 3-4x slower than with msvc.
8) No openmp support yet. Have not looked at this much, the binary distribution of clang doesn't seem to include it on windows.
9) No ASAN support yet, some of the sanitizers can be made to work, but it was decided to leave support out of this commit.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D3304
This patch adds support for IES files, a file format that is commonly used to store the directional intensity distribution of light sources.
The new IES node is supposed to be plugged into the Strength input of the Emission node of the lamp.
Since people generating IES files do not really seem to care about the standard, the parser is flexible enough to accept all test files I have tried.
Some common weirdnesses are distributing values over multiple lines that should go into one line, using commas instead of spaces as delimiters and adding various useless stuff at the end of the file.
The user interface of the node is similar to the script node, the user can either select an internal Text or load a file.
Internally, IES files are handled similar to Image textures: They are stored in slots by the LightManager and each unique IES is assigned to one slot.
The local coordinate system of the lamp is used, so that the direction of the light can be changed. For UI reasons, it's usually best to add an area light,
rotate it and then change its type, since especially the point light does not immediately show its local coordinate system in the viewport.
Reviewers: #cycles, dingto, sergey, brecht
Reviewed By: #cycles, dingto, brecht
Subscribers: OgDEV, crazyrobinhood, secundar, cardboard, pisuke, intrah, swerner, micah_denn, harvester, gottfried, disnel, campbellbarton, duarteframos, Lapineige, brecht, juicyfruit, dingto, marek, rickyblender, bliblubli, lockal, sergey
Differential Revision: https://developer.blender.org/D1543
The GPU kernel needs to use atomics for accumulation since all offsets are processed in
parallel, but on CPUs that's not the case, so we can disable them there for a considerable speedup.
The Math node currently has the normal atan() function, but for
actual angles this is fairly useless without additional nodes to handle the signs.
Since the node has two inputs anyways, it only makes sense to add an arctan2 option.
Reviewers: sergey, brecht
Differential Revision: https://developer.blender.org/D3430
Roughness baking previously defaulted to 1.0 for all diffuse materials,
now we also bake roughness values of Oren-Nayer and Principled Diffuse.
Differential Revision: https://developer.blender.org/D3115
Random numbers for step offset were correlated, now use stratified samples
which reduces noise as well for some types of volumes, mainly procedural
ones where the step size is bigger than the volume features.
Increasing the samplig dimensions like this is not optimal, I'm looking
into some deeper changes to reuse the random number and change the RR
probabilities, but this should fix the bug for now.
This save a little memory and copying in the kernel by storing only a 4x3
matrix instead of a 4x4 matrix. We already did this in a few places, and
those don't need to be special exceptions anymore now.
This is in preparation of making Transform affine only, and also gives us
a little extra type safety so we don't accidentally treat it as a regular
4x4 matrix.
The purpose of the previous code refactoring is to make the code more readable,
but combined with this change benchmarks also render about 2-3% faster with an
NVIDIA Titan Xp.
This is more important now that we will have tigther volume bounds that
we hit multiple times. It also avoids some noise due to RR previously
affecting these surfaces, which shouldn't have been the case and should
eventually be fixed for transparent BSDFs as well.
For non-volume scenes I found no performance impact on NVIDIA or AMD.
For volume scenes the noise decrease and fixed artifacts are worth the
little extra render time, when there is any.
Similar to the Principled BSDF, this should make it easier to set up volume
materials. Smoke and fire can be rendererd with just a single principled
volume node, the appropriate attributes will be used when available. The node
also works for simpler homogeneous volumes like water or mist.
Differential Revision: https://developer.blender.org/D3033
We now continue transparent paths after diffuse/glossy/transmission/volume
bounces are exceeded. This avoids unexpected boundaries in volumes with
transparent boundaries. It is also required for MIS to work correctly with
transparent surfaces, as we also continue through these in shadow rays.
The main visible changes is that volumes will now be lit by the background
even at volume bounces 0, same as surfaces.
Fixes T53914 and T54103.
