Changes:
- Renamed Split Viewer Node to Split Node
- Split Node is now under `Utilities` (similar to Switch node)
- Versioning: split viewer from 4.0 and before is replaced with the new split node connected to a new viewer node.
Pull Request: https://projects.blender.org/blender/blender/pulls/114245
Make size inference consistent with the viewport compositor (from a user's perspective). This patch uses constat folding to create a constant output out of constant inputs. This is consistent with the results of the realtime compositor.
Nodes not included in this patch require further refactoring or discussion. They will be addressed in future patches.
Pull Request: https://projects.blender.org/blender/blender/pulls/114755
The compositor sometimes produces straight alpha even though
premultiplied alpha is expected. Moreover, there is an inconsistency
between the CPU and GPU compositors.
For the GPU compositor, this is because GPU textures sometimes store
straight alpha, while the compositor always expects premultiplied alpha,
so we need to premultiply the alpha in those cases.
For the CPU compositor, this is because the image operation didn't
premultiply the alpha of byte textures, so we need to ensure
premultiplied alpha in those cases.
There is a data loss issue in case of byte images, since the IMB module
unpremultiplies premultiplied images then the compositor premultiplies
it again. But this will be handled in a different patch since it require
some design and refactoring first.
Pull Request: https://projects.blender.org/blender/blender/pulls/114305
This patch changes the interpolation algorithm utilized by the Keying
Screen node to a Gaussian Radial Basis Function Interpolation. This is
proposed because the current Voronoi triangulation based interpolation
has the following properties:
- Not temporally stable since the triangulation can abruptly change as
tracking markers change position.
- Not smooth in the mathematical sense, which is also readily visible in
the artists sense.
- Computationally expensive due to the triangulation and naive
rasterization algorithm.
On the other hand, the RBF interpolation method is temporally stable and
continuous, smooth and infinitely differentiable, and relatively simple
to compute assuming low number of markers, which is typically the case
for keying screen objects.
This breaks backward compatibility, but the keying screen is only used
as a secondary input for keying in typical compositor setups, so one
should expect minimal difference in outputs.
Pull Request: https://projects.blender.org/blender/blender/pulls/112480
The hash tables and vector blenlib headers were pulling many more
headers than they actually need, including the C base math header,
our C string API header, and the StringRef header. All of this
potentially slows down compilation and polutes autocomplete
with unrelated information.
Also remove the `ListBase` constructor for `Vector`. It wasn't used
much, and making it easy to use `ListBase` isn't worth it for the
same reasons mentioned above.
It turns out a lot of files depended on indirect includes of
`BLI_string.h` and `BLI_listbase.h`, so those are fixed here.
Pull Request: https://projects.blender.org/blender/blender/pulls/111801
This patch implements the Anisotropic Kuwahara filter for the Realtime
compositor and replaces the existing CPU implementation with a new one to be
compatible with the GPU implementation. The implementation is based on three
papers on Anisotropic Kuwahara filtering, presented and detailed in the code.
The new implementation exposes two extra parameters that control the sharpness
and directionality of the output, giving more artistic freedom.
While the implementation is different from the existing CPU implementation, it
is a higher quality one that is also faster and conforms better to the methods
described in the papers.
Examples can be seen in the pull request description.
Pull Request: https://projects.blender.org/blender/blender/pulls/110786
Include counts of some headers while making full blender build:
- BLI_color.hh 1771 -> 1718
- BLI_math_color.h 1828 -> 1783
- BLI_math_vector.hh 496 -> 405
- BLI_index_mask.hh 1341 -> 1267
- BLI_task.hh 958 -> 903
- BLI_generic_virtual_array.hh 509 -> 435
- IMB_colormanagement.h 437 -> 130
- GPU_texture.h 806 -> 780
- FN_multi_function.hh 331 -> 257
Note: DNA_node_tree_interface_types.h needs color include only
for the currently unused (but soon to be used) socket_color function.
Future step is to figure out how to include
DNA_node_tree_interface_types.h less.
Pull Request: #111113
Listing the "Blender Foundation" as copyright holder implied the Blender
Foundation holds copyright to files which may include work from many
developers.
While keeping copyright on headers makes sense for isolated libraries,
Blender's own code may be refactored or moved between files in a way
that makes the per file copyright holders less meaningful.
Copyright references to the "Blender Foundation" have been replaced with
"Blender Authors", with the exception of `./extern/` since these this
contains libraries which are more isolated, any changed to license
headers there can be handled on a case-by-case basis.
Some directories in `./intern/` have also been excluded:
- `./intern/cycles/` it's own `AUTHORS` file is planned.
- `./intern/opensubdiv/`.
An "AUTHORS" file has been added, using the chromium projects authors
file as a template.
Design task: #110784
Ref !110783.
Using ClangBuildAnalyzer on the whole Blender build, it was pointing
out that BLI_math.h is the heaviest "header hub" (i.e. non tiny file
that is included a lot).
However, there's very little (actually zero) source files in Blender
that need "all the math" (base, colors, vectors, matrices,
quaternions, intersection, interpolation, statistics, solvers and
time). A common use case is source files needing just vectors, or
just vectors & matrices, or just colors etc. Actually, 181 files
were including the whole math thing without needing it at all.
This change removes BLI_math.h completely, and instead in all the
places that need it, includes BLI_math_vector.h or BLI_math_color.h
and so on.
Change from that:
- BLI_math_color.h was included 1399 times -> now 408 (took 114.0sec
to parse -> now 36.3sec)
- BLI_simd.h 1403 -> 418 (109.7sec -> 34.9sec).
Full rebuild of Blender (Apple M1, Xcode, RelWithDebInfo) is not
affected much (342sec -> 334sec). Most of benefit would be when
someone's changing BLI_simd.h or BLI_math_color.h or similar files,
that now there's 3x fewer files result in a recompile.
Pull Request #110944
Both the `Math` node and the `Vector Math` currently only explicitly
support modulo using truncated division which is oftentimes not the
type of modulo desired as it behaves differently for negative numbers
and positive numbers.
Floored Modulo can be created by either using the `Wrap` operation or
a combination of multiple `Math` nodes. However both methods obfuscate
the actual intend of the artist and the math operation that is actually
used.
This patch adds modulo using floored division to the scalar `Math` node,
explicitly stating the intended math operation and renames the already
existing `"Modulo"` operation to `"Truncated Modulo"` to avoid confusion.
Only the ui name is changed, so this should not break compatibility.
Pull Request: https://projects.blender.org/blender/blender/pulls/110728
This patch uses the average variance of individual color channel as the
condition for choosing the appropriate quadrant. This will produce
different visual results, but ones that are consistent with the
intention of the Kuwahara filter.
This is done to be compatible with the GPU implementation, which uses
that method due to superior performance and memory saving.
In order to better suit the upcoming changes of shader node previews, this
patch replaces the old implementation of the storage of the compositor
previews. It also prevents memory loss for future modification.
BKE_node_preview_clear_tree was removed as it is no longer needed and
will not be used by the new shader node previews.
Pull Request: https://projects.blender.org/blender/blender/pulls/110064
This formats code that is disabled using `#if 0`. Formatting was achieved
by temporarily changing `#if 0` to `#if 1 /*something*/`, then formatting,
and then changing it back to `#if 0`.
Doing so avoids having duplicated logic for working with pixel
data which is being passed throughout the render pipeline.
Notable changes:
- ImBug can now store GPU texture.
This is not very finished part of the API, which will be
worked further to support tiling for very-high-res images.
- Implicit sharing is removed from the image buffer, as it is
no longer needed.
There should be no functional changes on user level with this
change.
Ref #108618
Pull Request: https://projects.blender.org/blender/blender/pulls/109788
It was only used by OpenEXR and Iris images, and saving the Z Buffer
in those formats was disabled by default. This option comes from the
times prior to the addition of the Multilayer EXR.
It also worth noting that it was not possible to save Iris with Depth
pass from Blender as internally it is called IRIZ format and it was
not exposed. But even after exposing this format option something still
was missing as saving and loading ITIZ did not show up the Depth pass.
The reason of removal is to make it a more clear match of the ImBuf
with a render pass, and use it instead of a custom type in the render
result and render pass API. This will simplify the API and also avoid
stealing buffers and making shallow copies when showing the render
result.
For the cases when Depth is needed a Multilayer EXR is to be used,
as most likely more than just the Depth will be needed.
On a user level this change:
- Removes the "Z Buffer" option from the interface.
- It preserves existing sockets in compositor nodes, but it will
output black image. Also changing the image data-block will
remove the socket unless a Multilayer EXR with Depth pass image
is selected.
- Removes "Depth" socket of the Viewer and Composite nodes.
Ref #108618
Pull Request: https://projects.blender.org/blender/blender/pulls/109687
After some recent changes BLI_math_base got (indirectly) included
from DNA file, causing defines conflict in Cycles: Cycles wants the
default fast behavior of square root, and BLI color wants it to be
more preciese.
Proposed solution is to move the SSE block away from the math_base
closer to code which uses it. The initial intent was to make those
functions reusable, but for a long long time the color utilities
are the only users of those functions.
This change does not prevent the error from re-occurring in the
future if some code includes sse2neon and BLI color utilities, but
it makes such conflict situation much less likely to happen, for
now.
The downside of this change is that the code now need to include
BLI_simd.h explicitly to access BLI_HAVE_SSE2 instead of relying
on it being included indirectly with math headers. The mitigation
for this is to change semantic of the BLI_HAVE_SSE2: now it is
defined to 1 if SSE2 is supported and to 0 otherwise. This makes
it so the code needs to check if using `#if BLI_HAVE_SSE2` and
if the BLI_simd.h is not included it will generate warning when
using GCC or Clang.
This change in semantic is is something the current patches would
need to ensure is handled correctly.
Pull Request: https://projects.blender.org/blender/blender/pulls/109664
Compute edges of image once based on luminance instead of all 3 channels.
This also gives a modest performance improvement of 8%. Measured on intel i9 CPU using a 1920 x 3199 image.
Pull Request: https://projects.blender.org/blender/blender/pulls/108858
Before this change the ImBuf struct had dedicated fields for the
buffer data. Now the color space is stored inside of the struct
which wraps around the buffer information.
This only changes the field placement, without changing the way
it is handled. In the future one might imagine that operations
like stealing buffer data should null-ify the buffer colorspace
pointer. Such changes would need to have more accurate thinking
before implementation.
Should be no functional changes.
Pull Request: https://projects.blender.org/blender/blender/pulls/109291
Compute luminance only once per region and per pixel by means of vectorization.
Measured time improvements on intel i9 CPU on a 1920 x 3199 image:
- from 14.7s to 3.9s for full-frame compositor
- from 50.1s to 15.3s for tiled compositor
Pull Request: https://projects.blender.org/blender/blender/pulls/108859
